rtt-f030/bsp/lm3s9b9x/rtconfig.h

150 lines
3.0 KiB
C

/* RT-Thread config file */
#ifndef __RTTHREAD_CFG_H__
#define __RTTHREAD_CFG_H__
/* RT_NAME_MAX*/
#define RT_NAME_MAX 8
/* RT_ALIGN_SIZE*/
#define RT_ALIGN_SIZE 4
/* PRIORITY_MAX*/
#define RT_THREAD_PRIORITY_MAX 32
/* Tick per Second*/
#define RT_TICK_PER_SECOND 100
/* SECTION: RT_DEBUG */
/* Thread Debug*/
/* #define RT_DEBUG */
/* #define RT_THREAD_DEBUG */
/* Using Hook*/
#define RT_USING_HOOK
/* SECTION: IPC */
/* Using Semaphore*/
#define RT_USING_SEMAPHORE
/* Using Mutex*/
#define RT_USING_MUTEX
/* Using Event*/
#define RT_USING_EVENT
/* Using Faset Event*/
/* #define RT_USING_FASTEVENT */
/* Using MailBox*/
#define RT_USING_MAILBOX
/* Using Message Queue*/
#define RT_USING_MESSAGEQUEUE
/* SECTION: Memory Management */
/* Using Memory Pool Management*/
#define RT_USING_MEMPOOL
/* Using Dynamic Heap Management*/
#define RT_USING_HEAP
/* Using Small MM*/
#define RT_USING_SMALL_MEM
/* Using SLAB Allocator*/
/* #define RT_USING_SLAB */
/* SECTION: Device System */
/* Using Device System*/
#define RT_USING_DEVICE
#define RT_USING_UART1
// #define RT_USING_UART2
// #define RT_USING_UART3
/* SECTION: Console options */
#define RT_USING_CONSOLE
/* the buffer size of console*/
#define RT_CONSOLEBUF_SIZE 128
/* SECTION: FinSH shell options */
/* Using FinSH as Shell*/
#define RT_USING_FINSH
/* Using symbol table */
#define FINSH_USING_SYMTAB
#define FINSH_USING_DESCRIPTION
//#define RT_USING_DFS
/* SECTION: DFS options */
#define RT_USING_DFS_ELMFAT
#define RT_DFS_ELM_WORD_ACCESS
/* the max number of mounted filesystem */
#define DFS_FILESYSTEMS_MAX 1
/* the max number of opened files */
#define DFS_FD_MAX 4
/* the max number of cached sector */
#define DFS_CACHE_MAX_NUM 4
/* SECTION: lwip, a lighwight TCP/IP protocol stack */
/* Using lighweight TCP/IP protocol stack*/
#define RT_USING_LWIP
/* Trace LwIP protocol*/
/* #define RT_LWIP_DEBUG */
/* Enable ICMP protocol*/
#define RT_LWIP_ICMP
/* Enable IGMP protocol*/
#define RT_LWIP_IGMP
/* Enable UDP protocol*/
#define RT_LWIP_UDP
/* Enable TCP protocol*/
#define RT_LWIP_TCP
/* the number of simulatenously active TCP connections*/
#define RT_LWIP_TCP_PCB_NUM 5
/* Ethernet padding size */
#define RT_LWIP_ETH_PAD_SIZE 2
/* Enable SNMP protocol*/
//#define RT_LWIP_SNMP
/* Using DHCP*/
/* #define RT_LWIP_DHCP */
#define RT_LWIP_DNS
/* ip address of target */
#define RT_LWIP_IPADDR "192.168.1.30"
/* gateway address of target */
#define RT_LWIP_GWADDR "192.168.1.1"
/* mask address of target */
#define RT_LWIP_MSKADDR "255.255.255.0"
/* tcp thread options */
#define RT_LWIP_TCPTHREAD_PRIORITY 12
#define RT_LWIP_TCPTHREAD_MBOX_SIZE 4
#define RT_LWIP_TCPTHREAD_STACKSIZE 1024
/* ethernet if thread options */
#define RT_LWIP_ETHTHREAD_PRIORITY 15
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 4
#define RT_LWIP_ETHTHREAD_STACKSIZE 512
/* TCP sender buffer space */
#define RT_LWIP_TCP_SND_BUF 8192
/* TCP receive window. */
#define RT_LWIP_TCP_WND 8192
/* the size of each pbuf in the pbuf pool. */
#define RT_LWIP_PBUF_POOL_BUFSIZE 1500
#endif