chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/imxrt1052-evk/Libraries/drivers/fsl_flexcan.c

2204 lines
71 KiB
C
Raw Blame History

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "fsl_flexcan.h"
/*******************************************************************************
* Definitons
******************************************************************************/
#define FLEXCAN_TIME_QUANTA_NUM (10)
/*! @brief FlexCAN Internal State. */
enum _flexcan_state
{
kFLEXCAN_StateIdle = 0x0, /*!< MB/RxFIFO idle.*/
kFLEXCAN_StateRxData = 0x1, /*!< MB receiving.*/
kFLEXCAN_StateRxRemote = 0x2, /*!< MB receiving remote reply.*/
kFLEXCAN_StateTxData = 0x3, /*!< MB transmitting.*/
kFLEXCAN_StateTxRemote = 0x4, /*!< MB transmitting remote request.*/
kFLEXCAN_StateRxFifo = 0x5, /*!< RxFIFO receiving.*/
};
/*! @brief FlexCAN message buffer CODE for Rx buffers. */
enum _flexcan_mb_code_rx
{
kFLEXCAN_RxMbInactive = 0x0, /*!< MB is not active.*/
kFLEXCAN_RxMbFull = 0x2, /*!< MB is full.*/
kFLEXCAN_RxMbEmpty = 0x4, /*!< MB is active and empty.*/
kFLEXCAN_RxMbOverrun = 0x6, /*!< MB is overwritten into a full buffer.*/
kFLEXCAN_RxMbBusy = 0x8, /*!< FlexCAN is updating the contents of the MB.*/
/*! The CPU must not access the MB.*/
kFLEXCAN_RxMbRanswer = 0xA, /*!< A frame was configured to recognize a Remote Request Frame */
/*! and transmit a Response Frame in return.*/
kFLEXCAN_RxMbNotUsed = 0xF, /*!< Not used.*/
};
/*! @brief FlexCAN message buffer CODE FOR Tx buffers. */
enum _flexcan_mb_code_tx
{
kFLEXCAN_TxMbInactive = 0x8, /*!< MB is not active.*/
kFLEXCAN_TxMbAbort = 0x9, /*!< MB is aborted.*/
kFLEXCAN_TxMbDataOrRemote = 0xC, /*!< MB is a TX Data Frame(when MB RTR = 0) or */
/*!< MB is a TX Remote Request Frame (when MB RTR = 1).*/
kFLEXCAN_TxMbTanswer = 0xE, /*!< MB is a TX Response Request Frame from */
/*! an incoming Remote Request Frame.*/
kFLEXCAN_TxMbNotUsed = 0xF, /*!< Not used.*/
};
/* Typedef for interrupt handler. */
typedef void (*flexcan_isr_t)(CAN_Type *base, flexcan_handle_t *handle);
/*******************************************************************************
* Prototypes
******************************************************************************/
/*!
* @brief Get the FlexCAN instance from peripheral base address.
*
* @param base FlexCAN peripheral base address.
* @return FlexCAN instance.
*/
uint32_t FLEXCAN_GetInstance(CAN_Type *base);
/*!
* @brief Enter FlexCAN Freeze Mode.
*
* This function makes the FlexCAN work under Freeze Mode.
*
* @param base FlexCAN peripheral base address.
*/
static void FLEXCAN_EnterFreezeMode(CAN_Type *base);
/*!
* @brief Exit FlexCAN Freeze Mode.
*
* This function makes the FlexCAN leave Freeze Mode.
*
* @param base FlexCAN peripheral base address.
*/
static void FLEXCAN_ExitFreezeMode(CAN_Type *base);
#if !defined(NDEBUG)
/*!
* @brief Check if Message Buffer is occupied by Rx FIFO.
*
* This function check if Message Buffer is occupied by Rx FIFO.
*
* @param base FlexCAN peripheral base address.
* @param mbIdx The FlexCAN Message Buffer index.
*/
static bool FLEXCAN_IsMbOccupied(CAN_Type *base, uint8_t mbIdx);
#endif
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641) && FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641)
/*!
* @brief Get the first valid Message buffer ID of give FlexCAN instance.
*
* This function is a helper function for Errata 5641 workaround.
*
* @param base FlexCAN peripheral base address.
* @return The first valid Message Buffer Number.
*/
static uint32_t FLEXCAN_GetFirstValidMb(CAN_Type *base);
#endif
/*!
* @brief Check if Message Buffer interrupt is enabled.
*
* This function check if Message Buffer interrupt is enabled.
*
* @param base FlexCAN peripheral base address.
* @param mbIdx The FlexCAN Message Buffer index.
*/
static bool FLEXCAN_IsMbIntEnabled(CAN_Type *base, uint8_t mbIdx);
/*!
* @brief Reset the FlexCAN Instance.
*
* Restores the FlexCAN module to reset state, notice that this function
* will set all the registers to reset state so the FlexCAN module can not work
* after calling this API.
*
* @param base FlexCAN peripheral base address.
*/
static void FLEXCAN_Reset(CAN_Type *base);
/*!
* @brief Set Baud Rate of FlexCAN.
*
* This function set the baud rate of FlexCAN.
*
* @param base FlexCAN peripheral base address.
* @param sourceClock_Hz Source Clock in Hz.
* @param baudRate_Bps Baud Rate in Bps.
*/
static void FLEXCAN_SetBaudRate(CAN_Type *base, uint32_t sourceClock_Hz, uint32_t baudRate_Bps);
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
/*!
* @brief Set Baud Rate of FlexCAN FD frame.
*
* This function set the baud rate of FlexCAN FD frame.
*
* @param base FlexCAN peripheral base address.
* @param sourceClock_Hz Source Clock in Hz.
* @param baudRateFD_Bps FD frame Baud Rate in Bps.
*/
static void FLEXCAN_SetFDBaudRate(CAN_Type *base, uint32_t sourceClock_Hz, uint32_t baudRateFD_Bps);
#endif
/*******************************************************************************
* Variables
******************************************************************************/
/* Array of FlexCAN peripheral base address. */
static CAN_Type *const s_flexcanBases[] = CAN_BASE_PTRS;
/* Array of FlexCAN IRQ number. */
static const IRQn_Type s_flexcanRxWarningIRQ[] = CAN_Rx_Warning_IRQS;
static const IRQn_Type s_flexcanTxWarningIRQ[] = CAN_Tx_Warning_IRQS;
static const IRQn_Type s_flexcanWakeUpIRQ[] = CAN_Wake_Up_IRQS;
static const IRQn_Type s_flexcanErrorIRQ[] = CAN_Error_IRQS;
static const IRQn_Type s_flexcanBusOffIRQ[] = CAN_Bus_Off_IRQS;
static const IRQn_Type s_flexcanMbIRQ[] = CAN_ORed_Message_buffer_IRQS;
/* Array of FlexCAN handle. */
static flexcan_handle_t *s_flexcanHandle[ARRAY_SIZE(s_flexcanBases)];
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/* Array of FlexCAN clock name. */
static const clock_ip_name_t s_flexcanClock[] = FLEXCAN_CLOCKS;
#if defined(FLEXCAN_PERIPH_CLOCKS)
/* Array of FlexCAN serial clock name. */
static const clock_ip_name_t s_flexcanPeriphClock[] = FLEXCAN_PERIPH_CLOCKS;
#endif /* FLEXCAN_PERIPH_CLOCKS */
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
/* FlexCAN ISR for transactional APIs. */
static flexcan_isr_t s_flexcanIsr;
/*******************************************************************************
* Code
******************************************************************************/
uint32_t FLEXCAN_GetInstance(CAN_Type *base)
{
uint32_t instance;
/* Find the instance index from base address mappings. */
for (instance = 0; instance < ARRAY_SIZE(s_flexcanBases); instance++)
{
if (s_flexcanBases[instance] == base)
{
break;
}
}
assert(instance < ARRAY_SIZE(s_flexcanBases));
return instance;
}
static void FLEXCAN_EnterFreezeMode(CAN_Type *base)
{
/* Set Freeze, Halt bits. */
base->MCR |= CAN_MCR_HALT_MASK;
/* Wait until the FlexCAN Module enter freeze mode. */
while (!(base->MCR & CAN_MCR_FRZACK_MASK))
{
}
}
static void FLEXCAN_ExitFreezeMode(CAN_Type *base)
{
/* Clear Freeze, Halt bits. */
base->MCR &= ~CAN_MCR_HALT_MASK;
/* Wait until the FlexCAN Module exit freeze mode. */
while (base->MCR & CAN_MCR_FRZACK_MASK)
{
}
}
#if !defined(NDEBUG)
static bool FLEXCAN_IsMbOccupied(CAN_Type *base, uint8_t mbIdx)
{
uint8_t lastOccupiedMb;
/* Is Rx FIFO enabled? */
if (base->MCR & CAN_MCR_RFEN_MASK)
{
/* Get RFFN value. */
lastOccupiedMb = ((base->CTRL2 & CAN_CTRL2_RFFN_MASK) >> CAN_CTRL2_RFFN_SHIFT);
/* Calculate the number of last Message Buffer occupied by Rx FIFO. */
lastOccupiedMb = ((lastOccupiedMb + 1) * 2) + 5;
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641) && FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641)
if (mbIdx <= (lastOccupiedMb + 1))
#else
if (mbIdx <= lastOccupiedMb)
#endif
{
return true;
}
else
{
return false;
}
}
else
{
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641) && FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641)
if (0 == mbIdx)
{
return true;
}
else
{
return false;
}
#else
return false;
#endif
}
}
#endif
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641) && FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641)
static uint32_t FLEXCAN_GetFirstValidMb(CAN_Type *base)
{
uint32_t firstValidMbNum;
if (base->MCR & CAN_MCR_RFEN_MASK)
{
firstValidMbNum = ((base->CTRL2 & CAN_CTRL2_RFFN_MASK) >> CAN_CTRL2_RFFN_SHIFT);
firstValidMbNum = ((firstValidMbNum + 1) * 2) + 6;
}
else
{
firstValidMbNum = 0;
}
return firstValidMbNum;
}
#endif
static bool FLEXCAN_IsMbIntEnabled(CAN_Type *base, uint8_t mbIdx)
{
/* Assertion. */
assert(mbIdx < FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base));
#if (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
if (mbIdx < 32)
{
#endif
if (base->IMASK1 & ((uint32_t)(1 << mbIdx)))
{
return true;
}
else
{
return false;
}
#if (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
}
else
{
if (base->IMASK2 & ((uint32_t)(1 << (mbIdx - 32))))
{
return true;
}
else
{
return false;
}
}
#endif
}
static void FLEXCAN_Reset(CAN_Type *base)
{
/* The module must should be first exit from low power
* mode, and then soft reset can be applied.
*/
assert(!(base->MCR & CAN_MCR_MDIS_MASK));
uint8_t i;
#if (FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT != 0)
/* De-assert DOZE Enable Bit. */
base->MCR &= ~CAN_MCR_DOZE_MASK;
#endif
/* Wait until FlexCAN exit from any Low Power Mode. */
while (base->MCR & CAN_MCR_LPMACK_MASK)
{
}
/* Assert Soft Reset Signal. */
base->MCR |= CAN_MCR_SOFTRST_MASK;
/* Wait until FlexCAN reset completes. */
while (base->MCR & CAN_MCR_SOFTRST_MASK)
{
}
/* Reset MCR rigister. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_GLITCH_FILTER) && FSL_FEATURE_FLEXCAN_HAS_GLITCH_FILTER)
base->MCR |= CAN_MCR_WRNEN_MASK | CAN_MCR_WAKSRC_MASK |
CAN_MCR_MAXMB(FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base) - 1);
#else
base->MCR |= CAN_MCR_WRNEN_MASK | CAN_MCR_MAXMB(FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base) - 1);
#endif
/* Reset CTRL1 and CTRL2 rigister. */
base->CTRL1 = CAN_CTRL1_SMP_MASK;
base->CTRL2 = CAN_CTRL2_TASD(0x16) | CAN_CTRL2_RRS_MASK | CAN_CTRL2_EACEN_MASK;
/* Clean all individual Rx Mask of Message Buffers. */
for (i = 0; i < FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base); i++)
{
base->RXIMR[i] = 0x3FFFFFFF;
}
/* Clean Global Mask of Message Buffers. */
base->RXMGMASK = 0x3FFFFFFF;
/* Clean Global Mask of Message Buffer 14. */
base->RX14MASK = 0x3FFFFFFF;
/* Clean Global Mask of Message Buffer 15. */
base->RX15MASK = 0x3FFFFFFF;
/* Clean Global Mask of Rx FIFO. */
base->RXFGMASK = 0x3FFFFFFF;
/* Clean all Message Buffer CS fields. */
for (i = 0; i < FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base); i++)
{
base->MB[i].CS = 0x0;
}
}
static void FLEXCAN_SetBaudRate(CAN_Type *base, uint32_t sourceClock_Hz, uint32_t baudRate_Bps)
{
flexcan_timing_config_t timingConfig;
uint32_t priDiv = baudRate_Bps * FLEXCAN_TIME_QUANTA_NUM;
/* Assertion: Desired baud rate is too high. */
assert(baudRate_Bps <= 1000000U);
/* Assertion: Source clock should greater than baud rate * FLEXCAN_TIME_QUANTA_NUM. */
assert(priDiv <= sourceClock_Hz);
if (0 == priDiv)
{
priDiv = 1;
}
priDiv = (sourceClock_Hz / priDiv) - 1;
/* Desired baud rate is too low. */
if (priDiv > 0xFF)
{
priDiv = 0xFF;
}
/* FlexCAN timing setting formula:
* FLEXCAN_TIME_QUANTA_NUM = 1 + (PSEG1 + 1) + (PSEG2 + 1) + (PROPSEG + 1);
*/
timingConfig.preDivider = priDiv;
timingConfig.phaseSeg1 = 3;
timingConfig.phaseSeg2 = 2;
timingConfig.propSeg = 1;
timingConfig.rJumpwidth = 1;
/* Update actual timing characteristic. */
FLEXCAN_SetTimingConfig(base, &timingConfig);
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
static void FLEXCAN_SetFDBaudRate(CAN_Type *base, uint32_t sourceClock_Hz, uint32_t baudRateFD_Bps)
{
flexcan_timing_config_t timingConfig;
uint32_t priDiv = baudRateFD_Bps * FLEXCAN_TIME_QUANTA_NUM;
/* Assertion: Desired baud rate is too high. */
assert(baudRateFD_Bps <= 1000000U);
/* Assertion: Source clock should greater than baud rate * FLEXCAN_TIME_QUANTA_NUM. */
assert(priDiv <= sourceClock_Hz);
if (0 == priDiv)
{
priDiv = 1;
}
priDiv = (sourceClock_Hz / priDiv) - 1;
/* Desired baud rate is too low. */
if (priDiv > 0xFF)
{
priDiv = 0xFF;
}
/* FlexCAN timing setting formula:
* FLEXCAN_TIME_QUANTA_NUM = 1 + (PSEG1 + 1) + (PSEG2 + 1) + (PROPSEG + 1);
*/
timingConfig.preDivider = priDiv;
timingConfig.phaseSeg1 = 3;
timingConfig.phaseSeg2 = 2;
timingConfig.propSeg = 1;
timingConfig.rJumpwidth = 1;
/* Update actual timing characteristic. */
FLEXCAN_SetFDTimingConfig(base, &timingConfig);
}
#endif
void FLEXCAN_Init(CAN_Type *base, const flexcan_config_t *config, uint32_t sourceClock_Hz)
{
uint32_t mcrTemp;
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
uint32_t instance;
#endif
/* Assertion. */
assert(config);
assert((config->maxMbNum > 0) && (config->maxMbNum <= FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base)));
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
instance = FLEXCAN_GetInstance(base);
/* Enable FlexCAN clock. */
CLOCK_EnableClock(s_flexcanClock[instance]);
#if defined(FLEXCAN_PERIPH_CLOCKS)
/* Enable FlexCAN serial clock. */
CLOCK_EnableClock(s_flexcanPeriphClock[instance]);
#endif /* FLEXCAN_PERIPH_CLOCKS */
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
#if (!defined(FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE)) || !FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE
/* Disable FlexCAN Module. */
FLEXCAN_Enable(base, false);
/* Protocol-Engine clock source selection, This bit must be set
* when FlexCAN Module in Disable Mode.
*/
base->CTRL1 = (kFLEXCAN_ClkSrcOsc == config->clkSrc) ? base->CTRL1 & ~CAN_CTRL1_CLKSRC_MASK :
base->CTRL1 | CAN_CTRL1_CLKSRC_MASK;
#endif /* FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE */
/* Enable FlexCAN Module for configuartion. */
FLEXCAN_Enable(base, true);
/* Reset to known status. */
FLEXCAN_Reset(base);
/* Save current MCR value and enable to enter Freeze mode(enabled by default). */
mcrTemp = base->MCR;
/* Set the maximum number of Message Buffers */
mcrTemp = (mcrTemp & ~CAN_MCR_MAXMB_MASK) | CAN_MCR_MAXMB(config->maxMbNum - 1);
/* Enable Loop Back Mode? */
base->CTRL1 = (config->enableLoopBack) ? base->CTRL1 | CAN_CTRL1_LPB_MASK : base->CTRL1 & ~CAN_CTRL1_LPB_MASK;
/* Enable Self Wake Up Mode? */
mcrTemp = (config->enableSelfWakeup) ? mcrTemp | CAN_MCR_SLFWAK_MASK : mcrTemp & ~CAN_MCR_SLFWAK_MASK;
/* Enable Individual Rx Masking? */
mcrTemp = (config->enableIndividMask) ? mcrTemp | CAN_MCR_IRMQ_MASK : mcrTemp & ~CAN_MCR_IRMQ_MASK;
#if (defined(FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT) && FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT)
/* Enable Doze Mode? */
mcrTemp = (config->enableDoze) ? mcrTemp | CAN_MCR_DOZE_MASK : mcrTemp & ~CAN_MCR_DOZE_MASK;
#endif
/* Save MCR Configuation. */
base->MCR = mcrTemp;
/* Baud Rate Configuration.*/
FLEXCAN_SetBaudRate(base, sourceClock_Hz, config->baudRate);
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
FLEXCAN_SetFDBaudRate(base, sourceClock_Hz, config->baudRateFD);
#endif
}
void FLEXCAN_Deinit(CAN_Type *base)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
uint32_t instance;
#endif
/* Reset all Register Contents. */
FLEXCAN_Reset(base);
/* Disable FlexCAN module. */
FLEXCAN_Enable(base, false);
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
instance = FLEXCAN_GetInstance(base);
#if defined(FLEXCAN_PERIPH_CLOCKS)
/* Disable FlexCAN serial clock. */
CLOCK_DisableClock(s_flexcanPeriphClock[instance]);
#endif /* FLEXCAN_PERIPH_CLOCKS */
/* Disable FlexCAN clock. */
CLOCK_DisableClock(s_flexcanClock[instance]);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
}
void FLEXCAN_GetDefaultConfig(flexcan_config_t *config)
{
/* Assertion. */
assert(config);
/* Initialize FlexCAN Module config struct with default value. */
#if (!defined(FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE)) || !FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE
config->clkSrc = kFLEXCAN_ClkSrcOsc;
#endif /* FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE */
config->baudRate = 1000000U;
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
config->baudRateFD = 1000000U;
#endif
config->maxMbNum = 16;
config->enableLoopBack = false;
config->enableSelfWakeup = false;
config->enableIndividMask = false;
#if (defined(FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT) && FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT)
config->enableDoze = false;
#endif
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
void FLEXCAN_FDEnable(CAN_Type *base, flexcan_mb_size_t dataSize, bool brs)
{
if (brs)
{
base->FDCTRL &= CAN_FDCTRL_FDRATE_MASK;
}
else
{
base->FDCTRL &= ~CAN_FDCTRL_FDRATE_MASK;
}
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
base->MCR |= CAN_MCR_FDEN_MASK;
base->FDCTRL |= CAN_FDCTRL_MBDSR0(dataSize);
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
#endif
void FLEXCAN_SetTimingConfig(CAN_Type *base, const flexcan_timing_config_t *config)
{
/* Assertion. */
assert(config);
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
/* Cleaning previous Timing Setting. */
base->CBT &= ~(CAN_CBT_EPRESDIV_MASK | CAN_CBT_ERJW_MASK | CAN_CBT_EPSEG1_MASK | CAN_CBT_EPSEG2_MASK |
CAN_CBT_EPROPSEG_MASK);
/* Updating Timing Setting according to configuration structure. */
base->CBT |=
(CAN_CBT_EPRESDIV(config->preDivider) | CAN_CBT_ERJW(config->rJumpwidth) | CAN_CBT_EPSEG1(config->phaseSeg1) |
CAN_CBT_EPSEG2(config->phaseSeg2) | CAN_CBT_EPROPSEG(config->propSeg));
#else
/* Cleaning previous Timing Setting. */
base->CTRL1 &= ~(CAN_CTRL1_PRESDIV_MASK | CAN_CTRL1_RJW_MASK | CAN_CTRL1_PSEG1_MASK | CAN_CTRL1_PSEG2_MASK |
CAN_CTRL1_PROPSEG_MASK);
/* Updating Timing Setting according to configuration structure. */
base->CTRL1 |=
(CAN_CTRL1_PRESDIV(config->preDivider) | CAN_CTRL1_RJW(config->rJumpwidth) |
CAN_CTRL1_PSEG1(config->phaseSeg1) | CAN_CTRL1_PSEG2(config->phaseSeg2) | CAN_CTRL1_PROPSEG(config->propSeg));
#endif
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
void FLEXCAN_SetFDTimingConfig(CAN_Type *base, const flexcan_timing_config_t *config)
{
/* Assertion. */
assert(config);
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
/* Cleaning previous Timing Setting. */
base->FDCBT &= ~(CAN_FDCBT_FPRESDIV_MASK | CAN_FDCBT_FRJW_MASK | CAN_FDCBT_FPSEG1_MASK | CAN_FDCBT_FPSEG2_MASK |
CAN_FDCBT_FPROPSEG_MASK);
/* Updating Timing Setting according to configuration structure. */
base->FDCBT |= (CAN_FDCBT_FPRESDIV(config->preDivider) | CAN_FDCBT_FRJW(config->rJumpwidth) |
CAN_FDCBT_FPSEG1(config->phaseSeg1) | CAN_FDCBT_FPSEG2(config->phaseSeg2) |
CAN_FDCBT_FPROPSEG(config->propSeg));
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
#endif
void FLEXCAN_SetRxMbGlobalMask(CAN_Type *base, uint32_t mask)
{
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
/* Setting Rx Message Buffer Global Mask value. */
base->RXMGMASK = mask;
base->RX14MASK = mask;
base->RX15MASK = mask;
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
void FLEXCAN_SetRxFifoGlobalMask(CAN_Type *base, uint32_t mask)
{
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
/* Setting Rx FIFO Global Mask value. */
base->RXFGMASK = mask;
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
void FLEXCAN_SetRxIndividualMask(CAN_Type *base, uint8_t maskIdx, uint32_t mask)
{
assert(maskIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
/* Setting Rx Individual Mask value. */
base->RXIMR[maskIdx] = mask;
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
void FLEXCAN_SetTxMbConfig(CAN_Type *base, uint8_t mbIdx, bool enable)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
/* Inactivate Message Buffer. */
if (enable)
{
base->MB[mbIdx].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
}
else
{
base->MB[mbIdx].CS = 0;
}
/* Clean Message Buffer content. */
base->MB[mbIdx].ID = 0x0;
base->MB[mbIdx].WORD0 = 0x0;
base->MB[mbIdx].WORD1 = 0x0;
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
void FLEXCAN_SetFDTxMbConfig(CAN_Type *base, uint8_t mbIdx, bool enable)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint8_t cnt = 0;
uint32_t dataSize;
dataSize = (base->FDCTRL & CAN_FDCTRL_MBDSR0_MASK) >> CAN_FDCTRL_MBDSR0_SHIFT;
/* Inactivate Message Buffer. */
if (enable)
{
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
break;
default:
break;
}
}
else
{
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].CS = 0;
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].CS = 0;
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].CS = 0;
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].CS = 0;
break;
default:
break;
}
}
/* Clean ID and Message Buffer content. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 2; cnt++)
{
base->MB_8B[mbIdx].WORD[cnt] = 0x0;
}
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 4; cnt++)
{
base->MB_16B[mbIdx].WORD[cnt] = 0x0;
}
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 8; cnt++)
{
base->MB_32B[mbIdx].WORD[cnt] = 0x0;
}
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 16; cnt++)
{
base->MB_64B[mbIdx].WORD[cnt] = 0x0;
}
break;
default:
break;
}
}
#endif
void FLEXCAN_SetRxMbConfig(CAN_Type *base, uint8_t mbIdx, const flexcan_rx_mb_config_t *config, bool enable)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(((config) || (false == enable)));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint32_t cs_temp = 0;
/* Inactivate Message Buffer. */
base->MB[mbIdx].CS = 0;
/* Clean Message Buffer content. */
base->MB[mbIdx].ID = 0x0;
base->MB[mbIdx].WORD0 = 0x0;
base->MB[mbIdx].WORD1 = 0x0;
if (enable)
{
/* Setup Message Buffer ID. */
base->MB[mbIdx].ID = config->id;
/* Setup Message Buffer format. */
if (kFLEXCAN_FrameFormatExtend == config->format)
{
cs_temp |= CAN_CS_IDE_MASK;
}
/* Setup Message Buffer type. */
if (kFLEXCAN_FrameTypeRemote == config->type)
{
cs_temp |= CAN_CS_RTR_MASK;
}
/* Activate Rx Message Buffer. */
cs_temp |= CAN_CS_CODE(kFLEXCAN_RxMbEmpty);
base->MB[mbIdx].CS = cs_temp;
}
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
void FLEXCAN_SetFDRxMbConfig(CAN_Type *base, uint8_t mbIdx, const flexcan_rx_mb_config_t *config, bool enable)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(((config) || (false == enable)));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint32_t cs_temp = 0;
uint8_t cnt = 0;
uint32_t dataSize;
dataSize = (base->FDCTRL & CAN_FDCTRL_MBDSR0_MASK) >> CAN_FDCTRL_MBDSR0_SHIFT;
/* Inactivate Message Buffer and clean ID, Message Buffer content. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].CS = 0;
base->MB_8B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 2; cnt++)
{
base->MB_8B[mbIdx].WORD[cnt] = 0x0;
}
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].CS = 0;
base->MB_16B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 4; cnt++)
{
base->MB_16B[mbIdx].WORD[cnt] = 0x0;
}
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].CS = 0;
base->MB_32B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 8; cnt++)
{
base->MB_32B[mbIdx].WORD[cnt] = 0x0;
}
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].CS = 0;
base->MB_64B[mbIdx].ID = 0x0;
for (cnt = 0; cnt < 16; cnt++)
{
base->MB_64B[mbIdx].WORD[cnt] = 0x0;
}
break;
default:
break;
}
if (enable)
{
/* Setup Message Buffer ID. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].ID = config->id;
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].ID = config->id;
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].ID = config->id;
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].ID = config->id;
break;
default:
break;
}
/* Setup Message Buffer format. */
if (kFLEXCAN_FrameFormatExtend == config->format)
{
cs_temp |= CAN_CS_IDE_MASK;
}
/* Activate Rx Message Buffer. */
cs_temp |= CAN_CS_CODE(kFLEXCAN_RxMbEmpty);
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].CS = cs_temp;
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].CS = cs_temp;
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].CS = cs_temp;
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].CS = cs_temp;
break;
default:
break;
}
}
}
#endif
void FLEXCAN_SetRxFifoConfig(CAN_Type *base, const flexcan_rx_fifo_config_t *config, bool enable)
{
/* Assertion. */
assert((config) || (false == enable));
volatile uint32_t *idFilterRegion = (volatile uint32_t *)(&base->MB[6].CS);
uint8_t setup_mb, i, rffn = 0;
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
if (enable)
{
assert(config->idFilterNum <= 128);
/* Get the setup_mb value. */
setup_mb = (base->MCR & CAN_MCR_MAXMB_MASK) >> CAN_MCR_MAXMB_SHIFT;
setup_mb = (setup_mb < FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base)) ?
setup_mb :
FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base);
/* Determine RFFN value. */
for (i = 0; i <= 0xF; i++)
{
if ((8 * (i + 1)) >= config->idFilterNum)
{
rffn = i;
assert(((setup_mb - 8) - (2 * rffn)) > 0);
base->CTRL2 = (base->CTRL2 & ~CAN_CTRL2_RFFN_MASK) | CAN_CTRL2_RFFN(rffn);
break;
}
}
}
else
{
rffn = (base->CTRL2 & CAN_CTRL2_RFFN_MASK) >> CAN_CTRL2_RFFN_SHIFT;
}
/* Clean ID filter table occuyied Message Buffer Region. */
rffn = (rffn + 1) * 8;
for (i = 0; i < rffn; i++)
{
idFilterRegion[i] = 0x0;
}
if (enable)
{
/* Disable unused Rx FIFO Filter. */
for (i = config->idFilterNum; i < rffn; i++)
{
idFilterRegion[i] = 0xFFFFFFFFU;
}
/* Copy ID filter table to Message Buffer Region. */
for (i = 0; i < config->idFilterNum; i++)
{
idFilterRegion[i] = config->idFilterTable[i];
}
/* Setup ID Fitlter Type. */
switch (config->idFilterType)
{
case kFLEXCAN_RxFifoFilterTypeA:
base->MCR = (base->MCR & ~CAN_MCR_IDAM_MASK) | CAN_MCR_IDAM(0x0);
break;
case kFLEXCAN_RxFifoFilterTypeB:
base->MCR = (base->MCR & ~CAN_MCR_IDAM_MASK) | CAN_MCR_IDAM(0x1);
break;
case kFLEXCAN_RxFifoFilterTypeC:
base->MCR = (base->MCR & ~CAN_MCR_IDAM_MASK) | CAN_MCR_IDAM(0x2);
break;
case kFLEXCAN_RxFifoFilterTypeD:
/* All frames rejected. */
base->MCR = (base->MCR & ~CAN_MCR_IDAM_MASK) | CAN_MCR_IDAM(0x3);
break;
default:
break;
}
/* Setting Message Reception Priority. */
base->CTRL2 = (config->priority == kFLEXCAN_RxFifoPrioHigh) ? base->CTRL2 & ~CAN_CTRL2_MRP_MASK :
base->CTRL2 | CAN_CTRL2_MRP_MASK;
/* Enable Rx Message FIFO. */
base->MCR |= CAN_MCR_RFEN_MASK;
}
else
{
/* Disable Rx Message FIFO. */
base->MCR &= ~CAN_MCR_RFEN_MASK;
/* Clean MB0 ~ MB5. */
FLEXCAN_SetRxMbConfig(base, 0, NULL, false);
FLEXCAN_SetRxMbConfig(base, 1, NULL, false);
FLEXCAN_SetRxMbConfig(base, 2, NULL, false);
FLEXCAN_SetRxMbConfig(base, 3, NULL, false);
FLEXCAN_SetRxMbConfig(base, 4, NULL, false);
FLEXCAN_SetRxMbConfig(base, 5, NULL, false);
}
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA) && FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA)
void FLEXCAN_EnableRxFifoDMA(CAN_Type *base, bool enable)
{
if (enable)
{
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
/* Enable FlexCAN DMA. */
base->MCR |= CAN_MCR_DMA_MASK;
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
else
{
/* Enter Freeze Mode. */
FLEXCAN_EnterFreezeMode(base);
/* Disable FlexCAN DMA. */
base->MCR &= ~CAN_MCR_DMA_MASK;
/* Exit Freeze Mode. */
FLEXCAN_ExitFreezeMode(base);
}
}
#endif /* FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA */
status_t FLEXCAN_WriteTxMb(CAN_Type *base, uint8_t mbIdx, const flexcan_frame_t *txFrame)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(txFrame);
assert(txFrame->length <= 8);
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint32_t cs_temp = 0;
/* Check if Message Buffer is available. */
if (CAN_CS_CODE(kFLEXCAN_TxMbDataOrRemote) != (base->MB[mbIdx].CS & CAN_CS_CODE_MASK))
{
/* Inactive Tx Message Buffer. */
base->MB[mbIdx].CS = (base->MB[mbIdx].CS & ~CAN_CS_CODE_MASK) | CAN_CS_CODE(kFLEXCAN_TxMbInactive);
/* Fill Message ID field. */
base->MB[mbIdx].ID = txFrame->id;
/* Fill Message Format field. */
if (kFLEXCAN_FrameFormatExtend == txFrame->format)
{
cs_temp |= CAN_CS_SRR_MASK | CAN_CS_IDE_MASK;
}
/* Fill Message Type field. */
if (kFLEXCAN_FrameTypeRemote == txFrame->type)
{
cs_temp |= CAN_CS_RTR_MASK;
}
cs_temp |= CAN_CS_CODE(kFLEXCAN_TxMbDataOrRemote) | CAN_CS_DLC(txFrame->length);
/* Load Message Payload. */
base->MB[mbIdx].WORD0 = txFrame->dataWord0;
base->MB[mbIdx].WORD1 = txFrame->dataWord1;
/* Activate Tx Message Buffer. */
base->MB[mbIdx].CS = cs_temp;
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641) && FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641)
base->MB[FLEXCAN_GetFirstValidMb(base)].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
base->MB[FLEXCAN_GetFirstValidMb(base)].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
#endif
return kStatus_Success;
}
else
{
/* Tx Message Buffer is activated, return immediately. */
return kStatus_Fail;
}
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
status_t FLEXCAN_WriteFDTxMb(CAN_Type *base, uint8_t mbIdx, const flexcan_fd_frame_t *txFrame)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(txFrame);
assert(txFrame->length <= 15);
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint32_t cs_temp = 0;
uint8_t cnt = 0;
uint32_t can_cs = 0;
uint32_t dataSize;
dataSize = (base->FDCTRL & CAN_FDCTRL_MBDSR0_MASK) >> CAN_FDCTRL_MBDSR0_SHIFT;
switch (dataSize)
{
case kFLEXCAN_8BperMB:
can_cs = base->MB_8B[mbIdx].CS;
break;
case kFLEXCAN_16BperMB:
can_cs = base->MB_16B[mbIdx].CS;
break;
case kFLEXCAN_32BperMB:
can_cs = base->MB_32B[mbIdx].CS;
break;
case kFLEXCAN_64BperMB:
can_cs = base->MB_64B[mbIdx].CS;
break;
default:
break;
}
/* Check if Message Buffer is available. */
if (CAN_CS_CODE(kFLEXCAN_TxMbDataOrRemote) != (can_cs & CAN_CS_CODE_MASK))
{
/* Inactive Tx Message Buffer and Fill Message ID field. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
base->MB_8B[mbIdx].CS = (can_cs & ~CAN_CS_CODE_MASK) | CAN_CS_CODE(kFLEXCAN_TxMbInactive);
base->MB_8B[mbIdx].ID = txFrame->id;
break;
case kFLEXCAN_16BperMB:
base->MB_16B[mbIdx].CS = (can_cs & ~CAN_CS_CODE_MASK) | CAN_CS_CODE(kFLEXCAN_TxMbInactive);
base->MB_16B[mbIdx].ID = txFrame->id;
break;
case kFLEXCAN_32BperMB:
base->MB_32B[mbIdx].CS = (can_cs & ~CAN_CS_CODE_MASK) | CAN_CS_CODE(kFLEXCAN_TxMbInactive);
base->MB_32B[mbIdx].ID = txFrame->id;
break;
case kFLEXCAN_64BperMB:
base->MB_64B[mbIdx].CS = (can_cs & ~CAN_CS_CODE_MASK) | CAN_CS_CODE(kFLEXCAN_TxMbInactive);
base->MB_64B[mbIdx].ID = txFrame->id;
break;
default:
break;
}
/* Fill Message Format field. */
if (kFLEXCAN_FrameFormatExtend == txFrame->format)
{
cs_temp |= CAN_CS_SRR_MASK | CAN_CS_IDE_MASK;
}
cs_temp |= CAN_CS_CODE(kFLEXCAN_TxMbDataOrRemote) | CAN_CS_DLC(txFrame->length) | CAN_CS_EDL(1);
/* Load Message Payload and Activate Tx Message Buffer. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
for (cnt = 0; cnt < 2; cnt++)
{
base->MB_8B[mbIdx].WORD[cnt] = txFrame->dataWord[cnt];
}
base->MB_8B[mbIdx].CS = cs_temp;
break;
case kFLEXCAN_16BperMB:
for (cnt = 0; cnt < 4; cnt++)
{
base->MB_16B[mbIdx].WORD[cnt] = txFrame->dataWord[cnt];
}
base->MB_16B[mbIdx].CS = cs_temp;
break;
case kFLEXCAN_32BperMB:
for (cnt = 0; cnt < 8; cnt++)
{
base->MB_32B[mbIdx].WORD[cnt] = txFrame->dataWord[cnt];
}
base->MB_32B[mbIdx].CS = cs_temp;
break;
case kFLEXCAN_64BperMB:
for (cnt = 0; cnt < 16; cnt++)
{
base->MB_64B[mbIdx].WORD[cnt] = txFrame->dataWord[cnt];
}
base->MB_64B[mbIdx].CS = cs_temp;
break;
default:
break;
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641) && FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641)
base->MB[FLEXCAN_GetFirstValidMb(base)].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
base->MB[FLEXCAN_GetFirstValidMb(base)].CS = CAN_CS_CODE(kFLEXCAN_TxMbInactive);
#endif
return kStatus_Success;
}
else
{
/* Tx Message Buffer is activated, return immediately. */
return kStatus_Fail;
}
}
#endif
status_t FLEXCAN_ReadRxMb(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *rxFrame)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(rxFrame);
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint32_t cs_temp;
uint8_t rx_code;
/* Read CS field of Rx Message Buffer to lock Message Buffer. */
cs_temp = base->MB[mbIdx].CS;
/* Get Rx Message Buffer Code field. */
rx_code = (cs_temp & CAN_CS_CODE_MASK) >> CAN_CS_CODE_SHIFT;
/* Check to see if Rx Message Buffer is full. */
if ((kFLEXCAN_RxMbFull == rx_code) || (kFLEXCAN_RxMbOverrun == rx_code))
{
/* Store Message ID. */
rxFrame->id = base->MB[mbIdx].ID & (CAN_ID_EXT_MASK | CAN_ID_STD_MASK);
/* Get the message ID and format. */
rxFrame->format = (cs_temp & CAN_CS_IDE_MASK) ? kFLEXCAN_FrameFormatExtend : kFLEXCAN_FrameFormatStandard;
/* Get the message type. */
rxFrame->type = (cs_temp & CAN_CS_RTR_MASK) ? kFLEXCAN_FrameTypeRemote : kFLEXCAN_FrameTypeData;
/* Get the message length. */
rxFrame->length = (cs_temp & CAN_CS_DLC_MASK) >> CAN_CS_DLC_SHIFT;
/* Store Message Payload. */
rxFrame->dataWord0 = base->MB[mbIdx].WORD0;
rxFrame->dataWord1 = base->MB[mbIdx].WORD1;
/* Read free-running timer to unlock Rx Message Buffer. */
(void)base->TIMER;
if (kFLEXCAN_RxMbFull == rx_code)
{
return kStatus_Success;
}
else
{
return kStatus_FLEXCAN_RxOverflow;
}
}
else
{
/* Read free-running timer to unlock Rx Message Buffer. */
(void)base->TIMER;
return kStatus_Fail;
}
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
status_t FLEXCAN_ReadFDRxMb(CAN_Type *base, uint8_t mbIdx, flexcan_fd_frame_t *rxFrame)
{
/* Assertion. */
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(rxFrame);
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
uint32_t cs_temp;
uint8_t rx_code;
uint8_t cnt = 0;
uint32_t can_id = 0;
uint32_t dataSize;
dataSize = (base->FDCTRL & CAN_FDCTRL_MBDSR0_MASK) >> CAN_FDCTRL_MBDSR0_SHIFT;
cs_temp = base->MB[mbIdx].CS;
/* Read CS field of Rx Message Buffer to lock Message Buffer. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
cs_temp = base->MB_8B[mbIdx].CS;
can_id = base->MB_8B[mbIdx].ID;
break;
case kFLEXCAN_16BperMB:
cs_temp = base->MB_16B[mbIdx].CS;
can_id = base->MB_16B[mbIdx].ID;
break;
case kFLEXCAN_32BperMB:
cs_temp = base->MB_32B[mbIdx].CS;
can_id = base->MB_32B[mbIdx].ID;
break;
case kFLEXCAN_64BperMB:
cs_temp = base->MB_64B[mbIdx].CS;
can_id = base->MB_64B[mbIdx].ID;
break;
default:
break;
}
/* Get Rx Message Buffer Code field. */
rx_code = (cs_temp & CAN_CS_CODE_MASK) >> CAN_CS_CODE_SHIFT;
/* Check to see if Rx Message Buffer is full. */
if ((kFLEXCAN_RxMbFull == rx_code) || (kFLEXCAN_RxMbOverrun == rx_code))
{
/* Store Message ID. */
rxFrame->id = can_id & (CAN_ID_EXT_MASK | CAN_ID_STD_MASK);
/* Get the message ID and format. */
rxFrame->format = (cs_temp & CAN_CS_IDE_MASK) ? kFLEXCAN_FrameFormatExtend : kFLEXCAN_FrameFormatStandard;
/* Get the message type. */
rxFrame->type = (cs_temp & CAN_CS_RTR_MASK) ? kFLEXCAN_FrameTypeRemote : kFLEXCAN_FrameTypeData;
/* Get the message length. */
rxFrame->length = (cs_temp & CAN_CS_DLC_MASK) >> CAN_CS_DLC_SHIFT;
/* Store Message Payload. */
switch (dataSize)
{
case kFLEXCAN_8BperMB:
for (cnt = 0; cnt < 2; cnt++)
{
rxFrame->dataWord[cnt] = base->MB_8B[mbIdx].WORD[cnt];
}
break;
case kFLEXCAN_16BperMB:
for (cnt = 0; cnt < 4; cnt++)
{
rxFrame->dataWord[cnt] = base->MB_16B[mbIdx].WORD[cnt];
}
break;
case kFLEXCAN_32BperMB:
for (cnt = 0; cnt < 8; cnt++)
{
rxFrame->dataWord[cnt] = base->MB_32B[mbIdx].WORD[cnt];
}
break;
case kFLEXCAN_64BperMB:
for (cnt = 0; cnt < 16; cnt++)
{
rxFrame->dataWord[cnt] = base->MB_64B[mbIdx].WORD[cnt];
}
break;
default:
break;
}
/* Read free-running timer to unlock Rx Message Buffer. */
(void)base->TIMER;
if (kFLEXCAN_RxMbFull == rx_code)
{
return kStatus_Success;
}
else
{
return kStatus_FLEXCAN_RxOverflow;
}
}
else
{
/* Read free-running timer to unlock Rx Message Buffer. */
(void)base->TIMER;
return kStatus_Fail;
}
}
#endif
status_t FLEXCAN_ReadRxFifo(CAN_Type *base, flexcan_frame_t *rxFrame)
{
/* Assertion. */
assert(rxFrame);
uint32_t cs_temp;
/* Check if Rx FIFO is Enabled. */
if (base->MCR & CAN_MCR_RFEN_MASK)
{
/* Read CS field of Rx Message Buffer to lock Message Buffer. */
cs_temp = base->MB[0].CS;
/* Read data from Rx FIFO output port. */
/* Store Message ID. */
rxFrame->id = base->MB[0].ID & (CAN_ID_EXT_MASK | CAN_ID_STD_MASK);
/* Get the message ID and format. */
rxFrame->format = (cs_temp & CAN_CS_IDE_MASK) ? kFLEXCAN_FrameFormatExtend : kFLEXCAN_FrameFormatStandard;
/* Get the message type. */
rxFrame->type = (cs_temp & CAN_CS_RTR_MASK) ? kFLEXCAN_FrameTypeRemote : kFLEXCAN_FrameTypeData;
/* Get the message length. */
rxFrame->length = (cs_temp & CAN_CS_DLC_MASK) >> CAN_CS_DLC_SHIFT;
/* Store Message Payload. */
rxFrame->dataWord0 = base->MB[0].WORD0;
rxFrame->dataWord1 = base->MB[0].WORD1;
/* Store ID Filter Hit Index. */
rxFrame->idhit = (uint8_t)(base->RXFIR & CAN_RXFIR_IDHIT_MASK);
/* Read free-running timer to unlock Rx Message Buffer. */
(void)base->TIMER;
return kStatus_Success;
}
else
{
return kStatus_Fail;
}
}
status_t FLEXCAN_TransferSendBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *txFrame)
{
/* Write Tx Message Buffer to initiate a data sending. */
if (kStatus_Success == FLEXCAN_WriteTxMb(base, mbIdx, txFrame))
{
/* Wait until CAN Message send out. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
while (!FLEXCAN_GetMbStatusFlags(base, (uint64_t)1 << mbIdx))
#else
while (!FLEXCAN_GetMbStatusFlags(base, 1 << mbIdx))
#endif
{
}
/* Clean Tx Message Buffer Flag. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_ClearMbStatusFlags(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_ClearMbStatusFlags(base, 1 << mbIdx);
#endif
return kStatus_Success;
}
else
{
return kStatus_Fail;
}
}
status_t FLEXCAN_TransferReceiveBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *rxFrame)
{
/* Wait until Rx Message Buffer non-empty. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
while (!FLEXCAN_GetMbStatusFlags(base, (uint64_t)1 << mbIdx))
#else
while (!FLEXCAN_GetMbStatusFlags(base, 1 << mbIdx))
#endif
{
}
/* Clean Rx Message Buffer Flag. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_ClearMbStatusFlags(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_ClearMbStatusFlags(base, 1 << mbIdx);
#endif
/* Read Received CAN Message. */
return FLEXCAN_ReadRxMb(base, mbIdx, rxFrame);
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
status_t FLEXCAN_TransferFDSendBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_fd_frame_t *txFrame)
{
/* Write Tx Message Buffer to initiate a data sending. */
if (kStatus_Success == FLEXCAN_WriteFDTxMb(base, mbIdx, txFrame))
{
/* Wait until CAN Message send out. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
while (!FLEXCAN_GetMbStatusFlags(base, (uint64_t)1 << mbIdx))
#else
while (!FLEXCAN_GetMbStatusFlags(base, 1 << mbIdx))
#endif
{
}
/* Clean Tx Message Buffer Flag. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_ClearMbStatusFlags(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_ClearMbStatusFlags(base, 1 << mbIdx);
#endif
return kStatus_Success;
}
else
{
return kStatus_Fail;
}
}
status_t FLEXCAN_TransferFDReceiveBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_fd_frame_t *rxFrame)
{
/* Wait until Rx Message Buffer non-empty. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
while (!FLEXCAN_GetMbStatusFlags(base, (uint64_t)1 << mbIdx))
#else
while (!FLEXCAN_GetMbStatusFlags(base, 1 << mbIdx))
#endif
{
}
/* Clean Rx Message Buffer Flag. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_ClearMbStatusFlags(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_ClearMbStatusFlags(base, 1 << mbIdx);
#endif
/* Read Received CAN Message. */
return FLEXCAN_ReadFDRxMb(base, mbIdx, rxFrame);
}
#endif
status_t FLEXCAN_TransferReceiveFifoBlocking(CAN_Type *base, flexcan_frame_t *rxFrame)
{
status_t rxFifoStatus;
/* Wait until Rx FIFO non-empty. */
while (!FLEXCAN_GetMbStatusFlags(base, kFLEXCAN_RxFifoFrameAvlFlag))
{
}
/* */
rxFifoStatus = FLEXCAN_ReadRxFifo(base, rxFrame);
/* Clean Rx Fifo available flag. */
FLEXCAN_ClearMbStatusFlags(base, kFLEXCAN_RxFifoFrameAvlFlag);
return rxFifoStatus;
}
void FLEXCAN_TransferCreateHandle(CAN_Type *base,
flexcan_handle_t *handle,
flexcan_transfer_callback_t callback,
void *userData)
{
assert(handle);
uint8_t instance;
/* Clean FlexCAN transfer handle. */
memset(handle, 0, sizeof(*handle));
/* Get instance from peripheral base address. */
instance = FLEXCAN_GetInstance(base);
/* Save the context in global variables to support the double weak mechanism. */
s_flexcanHandle[instance] = handle;
/* Register Callback function. */
handle->callback = callback;
handle->userData = userData;
s_flexcanIsr = FLEXCAN_TransferHandleIRQ;
/* We Enable Error & Status interrupt here, because this interrupt just
* report current status of FlexCAN module through Callback function.
* It is insignificance without a available callback function.
*/
if (handle->callback != NULL)
{
FLEXCAN_EnableInterrupts(base, kFLEXCAN_BusOffInterruptEnable | kFLEXCAN_ErrorInterruptEnable |
kFLEXCAN_RxWarningInterruptEnable | kFLEXCAN_TxWarningInterruptEnable |
kFLEXCAN_WakeUpInterruptEnable);
}
else
{
FLEXCAN_DisableInterrupts(base, kFLEXCAN_BusOffInterruptEnable | kFLEXCAN_ErrorInterruptEnable |
kFLEXCAN_RxWarningInterruptEnable | kFLEXCAN_TxWarningInterruptEnable |
kFLEXCAN_WakeUpInterruptEnable);
}
/* Enable interrupts in NVIC. */
EnableIRQ((IRQn_Type)(s_flexcanRxWarningIRQ[instance]));
EnableIRQ((IRQn_Type)(s_flexcanTxWarningIRQ[instance]));
EnableIRQ((IRQn_Type)(s_flexcanWakeUpIRQ[instance]));
EnableIRQ((IRQn_Type)(s_flexcanErrorIRQ[instance]));
EnableIRQ((IRQn_Type)(s_flexcanBusOffIRQ[instance]));
EnableIRQ((IRQn_Type)(s_flexcanMbIRQ[instance]));
}
status_t FLEXCAN_TransferSendNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *xfer)
{
/* Assertion. */
assert(handle);
assert(xfer);
assert(xfer->mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, xfer->mbIdx));
/* Check if Message Buffer is idle. */
if (kFLEXCAN_StateIdle == handle->mbState[xfer->mbIdx])
{
/* Distinguish transmit type. */
if (kFLEXCAN_FrameTypeRemote == xfer->frame->type)
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateTxRemote;
/* Register user Frame buffer to receive remote Frame. */
handle->mbFrameBuf[xfer->mbIdx] = xfer->frame;
}
else
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateTxData;
}
if (kStatus_Success == FLEXCAN_WriteTxMb(base, xfer->mbIdx, xfer->frame))
{
/* Enable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_EnableMbInterrupts(base, (uint64_t)1 << xfer->mbIdx);
#else
FLEXCAN_EnableMbInterrupts(base, 1 << xfer->mbIdx);
#endif
return kStatus_Success;
}
else
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateIdle;
return kStatus_Fail;
}
}
else
{
return kStatus_FLEXCAN_TxBusy;
}
}
status_t FLEXCAN_TransferReceiveNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *xfer)
{
/* Assertion. */
assert(handle);
assert(xfer);
assert(xfer->mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, xfer->mbIdx));
/* Check if Message Buffer is idle. */
if (kFLEXCAN_StateIdle == handle->mbState[xfer->mbIdx])
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateRxData;
/* Register Message Buffer. */
handle->mbFrameBuf[xfer->mbIdx] = xfer->frame;
/* Enable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_EnableMbInterrupts(base, (uint64_t)1 << xfer->mbIdx);
#else
FLEXCAN_EnableMbInterrupts(base, 1 << xfer->mbIdx);
#endif
return kStatus_Success;
}
else
{
return kStatus_FLEXCAN_RxBusy;
}
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
status_t FLEXCAN_TransferFDSendNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *xfer)
{
/* Assertion. */
assert(handle);
assert(xfer);
assert(xfer->mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, xfer->mbIdx));
/* Check if Message Buffer is idle. */
if (kFLEXCAN_StateIdle == handle->mbState[xfer->mbIdx])
{
/* Distinguish transmit type. */
if (kFLEXCAN_FrameTypeRemote == xfer->frame->type)
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateTxRemote;
/* Register user Frame buffer to receive remote Frame. */
handle->mbFDFrameBuf[xfer->mbIdx] = xfer->framefd;
}
else
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateTxData;
}
if (kStatus_Success == FLEXCAN_WriteFDTxMb(base, xfer->mbIdx, xfer->framefd))
{
/* Enable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_EnableMbInterrupts(base, (uint64_t)1 << xfer->mbIdx);
#else
FLEXCAN_EnableMbInterrupts(base, 1 << xfer->mbIdx);
#endif
return kStatus_Success;
}
else
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateIdle;
return kStatus_Fail;
}
}
else
{
return kStatus_FLEXCAN_TxBusy;
}
}
status_t FLEXCAN_TransferFDReceiveNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *xfer)
{
/* Assertion. */
assert(handle);
assert(xfer);
assert(xfer->mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, xfer->mbIdx));
/* Check if Message Buffer is idle. */
if (kFLEXCAN_StateIdle == handle->mbState[xfer->mbIdx])
{
handle->mbState[xfer->mbIdx] = kFLEXCAN_StateRxData;
/* Register Message Buffer. */
handle->mbFDFrameBuf[xfer->mbIdx] = xfer->framefd;
/* Enable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_EnableMbInterrupts(base, (uint64_t)1 << xfer->mbIdx);
#else
FLEXCAN_EnableMbInterrupts(base, 1 << xfer->mbIdx);
#endif
return kStatus_Success;
}
else
{
return kStatus_FLEXCAN_RxBusy;
}
}
#endif
status_t FLEXCAN_TransferReceiveFifoNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_fifo_transfer_t *xfer)
{
/* Assertion. */
assert(handle);
assert(xfer);
/* Check if Message Buffer is idle. */
if (kFLEXCAN_StateIdle == handle->rxFifoState)
{
handle->rxFifoState = kFLEXCAN_StateRxFifo;
/* Register Message Buffer. */
handle->rxFifoFrameBuf = xfer->frame;
/* Enable Message Buffer Interrupt. */
FLEXCAN_EnableMbInterrupts(
base, kFLEXCAN_RxFifoOverflowFlag | kFLEXCAN_RxFifoWarningFlag | kFLEXCAN_RxFifoFrameAvlFlag);
return kStatus_Success;
}
else
{
return kStatus_FLEXCAN_RxFifoBusy;
}
}
void FLEXCAN_TransferAbortSend(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx)
{
/* Assertion. */
assert(handle);
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
/* Disable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_DisableMbInterrupts(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_DisableMbInterrupts(base, 1 << mbIdx);
#endif
/* Un-register handle. */
handle->mbFrameBuf[mbIdx] = 0x0;
/* Clean Message Buffer. */
FLEXCAN_SetTxMbConfig(base, mbIdx, true);
handle->mbState[mbIdx] = kFLEXCAN_StateIdle;
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
void FLEXCAN_TransferFDAbortSend(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx)
{
/* Assertion. */
assert(handle);
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
/* Disable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_DisableMbInterrupts(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_DisableMbInterrupts(base, 1 << mbIdx);
#endif
/* Un-register handle. */
handle->mbFDFrameBuf[mbIdx] = 0x0;
/* Clean Message Buffer. */
FLEXCAN_SetFDTxMbConfig(base, mbIdx, true);
handle->mbState[mbIdx] = kFLEXCAN_StateIdle;
}
void FLEXCAN_TransferFDAbortReceive(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx)
{
/* Assertion. */
assert(handle);
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
/* Disable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_DisableMbInterrupts(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_DisableMbInterrupts(base, 1 << mbIdx);
#endif
/* Un-register handle. */
handle->mbFDFrameBuf[mbIdx] = 0x0;
handle->mbState[mbIdx] = kFLEXCAN_StateIdle;
}
#endif
void FLEXCAN_TransferAbortReceive(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx)
{
/* Assertion. */
assert(handle);
assert(mbIdx <= (base->MCR & CAN_MCR_MAXMB_MASK));
assert(!FLEXCAN_IsMbOccupied(base, mbIdx));
/* Disable Message Buffer Interrupt. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_DisableMbInterrupts(base, (uint64_t)1 << mbIdx);
#else
FLEXCAN_DisableMbInterrupts(base, 1 << mbIdx);
#endif
/* Un-register handle. */
handle->mbFrameBuf[mbIdx] = 0x0;
handle->mbState[mbIdx] = kFLEXCAN_StateIdle;
}
void FLEXCAN_TransferAbortReceiveFifo(CAN_Type *base, flexcan_handle_t *handle)
{
/* Assertion. */
assert(handle);
/* Check if Rx FIFO is enabled. */
if (base->MCR & CAN_MCR_RFEN_MASK)
{
/* Disable Rx Message FIFO Interrupts. */
FLEXCAN_DisableMbInterrupts(
base, kFLEXCAN_RxFifoOverflowFlag | kFLEXCAN_RxFifoWarningFlag | kFLEXCAN_RxFifoFrameAvlFlag);
/* Un-register handle. */
handle->rxFifoFrameBuf = 0x0;
}
handle->rxFifoState = kFLEXCAN_StateIdle;
}
void FLEXCAN_TransferHandleIRQ(CAN_Type *base, flexcan_handle_t *handle)
{
/* Assertion. */
assert(handle);
status_t status = kStatus_FLEXCAN_UnHandled;
uint32_t result;
/* Store Current FlexCAN Module Error and Status. */
result = base->ESR1;
do
{
/* Solve FlexCAN Error and Status Interrupt. */
if (result & (kFLEXCAN_TxWarningIntFlag | kFLEXCAN_RxWarningIntFlag | kFLEXCAN_BusOffIntFlag |
kFLEXCAN_ErrorIntFlag | kFLEXCAN_WakeUpIntFlag))
{
status = kStatus_FLEXCAN_ErrorStatus;
/* Clear FlexCAN Error and Status Interrupt. */
FLEXCAN_ClearStatusFlags(base, kFLEXCAN_TxWarningIntFlag | kFLEXCAN_RxWarningIntFlag |
kFLEXCAN_BusOffIntFlag | kFLEXCAN_ErrorIntFlag | kFLEXCAN_WakeUpIntFlag);
}
/* Solve FlexCAN Rx FIFO & Message Buffer Interrupt. */
else
{
/* For this implementation, we solve the Message with lowest MB index first. */
for (result = 0; result < FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base); result++)
{
/* Get the lowest unhandled Message Buffer */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
if ((FLEXCAN_GetMbStatusFlags(base, (uint64_t)1 << result)) && (FLEXCAN_IsMbIntEnabled(base, result)))
#else
if ((FLEXCAN_GetMbStatusFlags(base, 1 << result)) && (FLEXCAN_IsMbIntEnabled(base, result)))
#endif
{
break;
}
}
/* Does not find Message to deal with. */
if (result == FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(base))
{
break;
}
/* Solve Rx FIFO interrupt. */
if ((kFLEXCAN_StateIdle != handle->rxFifoState) && ((1 << result) <= kFLEXCAN_RxFifoOverflowFlag))
{
switch (1 << result)
{
case kFLEXCAN_RxFifoOverflowFlag:
status = kStatus_FLEXCAN_RxFifoOverflow;
break;
case kFLEXCAN_RxFifoWarningFlag:
status = kStatus_FLEXCAN_RxFifoWarning;
break;
case kFLEXCAN_RxFifoFrameAvlFlag:
status = FLEXCAN_ReadRxFifo(base, handle->rxFifoFrameBuf);
if (kStatus_Success == status)
{
status = kStatus_FLEXCAN_RxFifoIdle;
}
FLEXCAN_TransferAbortReceiveFifo(base, handle);
break;
default:
status = kStatus_FLEXCAN_UnHandled;
break;
}
}
else
{
/* Get current State of Message Buffer. */
switch (handle->mbState[result])
{
/* Solve Rx Data Frame. */
case kFLEXCAN_StateRxData:
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
status = FLEXCAN_ReadFDRxMb(base, result, handle->mbFDFrameBuf[result]);
#else
status = FLEXCAN_ReadRxMb(base, result, handle->mbFrameBuf[result]);
#endif
if (kStatus_Success == status)
{
status = kStatus_FLEXCAN_RxIdle;
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
FLEXCAN_TransferFDAbortReceive(base, handle, result);
#else
FLEXCAN_TransferAbortReceive(base, handle, result);
#endif
break;
/* Solve Rx Remote Frame. */
case kFLEXCAN_StateRxRemote:
status = FLEXCAN_ReadRxMb(base, result, handle->mbFrameBuf[result]);
if (kStatus_Success == status)
{
status = kStatus_FLEXCAN_RxIdle;
}
FLEXCAN_TransferAbortReceive(base, handle, result);
break;
/* Solve Tx Data Frame. */
case kFLEXCAN_StateTxData:
status = kStatus_FLEXCAN_TxIdle;
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
FLEXCAN_TransferFDAbortSend(base, handle, result);
#else
FLEXCAN_TransferAbortSend(base, handle, result);
#endif
break;
/* Solve Tx Remote Frame. */
case kFLEXCAN_StateTxRemote:
handle->mbState[result] = kFLEXCAN_StateRxRemote;
status = kStatus_FLEXCAN_TxSwitchToRx;
break;
default:
status = kStatus_FLEXCAN_UnHandled;
break;
}
}
/* Clear resolved Message Buffer IRQ. */
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
FLEXCAN_ClearMbStatusFlags(base, (uint64_t)1 << result);
#else
FLEXCAN_ClearMbStatusFlags(base, 1 << result);
#endif
}
/* Calling Callback Function if has one. */
if (handle->callback != NULL)
{
handle->callback(base, handle, status, result, handle->userData);
}
/* Reset return status */
status = kStatus_FLEXCAN_UnHandled;
/* Store Current FlexCAN Module Error and Status. */
result = base->ESR1;
}
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
while ((0 != FLEXCAN_GetMbStatusFlags(base, 0xFFFFFFFFFFFFFFFFU)) ||
(0 != (result & (kFLEXCAN_TxWarningIntFlag | kFLEXCAN_RxWarningIntFlag | kFLEXCAN_BusOffIntFlag |
kFLEXCAN_ErrorIntFlag | kFLEXCAN_WakeUpIntFlag))));
#else
while ((0 != FLEXCAN_GetMbStatusFlags(base, 0xFFFFFFFFU)) ||
(0 != (result & (kFLEXCAN_TxWarningIntFlag | kFLEXCAN_RxWarningIntFlag | kFLEXCAN_BusOffIntFlag |
kFLEXCAN_ErrorIntFlag | kFLEXCAN_WakeUpIntFlag))));
#endif
}
#if defined(CAN0)
void CAN0_DriverIRQHandler(void)
{
assert(s_flexcanHandle[0]);
s_flexcanIsr(CAN0, s_flexcanHandle[0]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(CAN1)
void CAN1_DriverIRQHandler(void)
{
assert(s_flexcanHandle[1]);
s_flexcanIsr(CAN1, s_flexcanHandle[1]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(CAN2)
void CAN2_DriverIRQHandler(void)
{
assert(s_flexcanHandle[2]);
s_flexcanIsr(CAN2, s_flexcanHandle[2]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(CAN3)
void CAN3_DriverIRQHandler(void)
{
assert(s_flexcanHandle[3]);
s_flexcanIsr(CAN3, s_flexcanHandle[3]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(CAN4)
void CAN4_DriverIRQHandler(void)
{
assert(s_flexcanHandle[4]);
s_flexcanIsr(CAN4, s_flexcanHandle[4]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(DMA__CAN0)
void DMA_FLEXCAN0_INT_DriverIRQHandler(void)
{
assert(s_flexcanHandle[FLEXCAN_GetInstance(DMA__CAN0)]);
s_flexcanIsr(DMA__CAN0, s_flexcanHandle[FLEXCAN_GetInstance(DMA__CAN0)]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(DMA__CAN1)
void DMA_FLEXCAN1_INT_DriverIRQHandler(void)
{
assert(s_flexcanHandle[FLEXCAN_GetInstance(DMA__CAN1)]);
s_flexcanIsr(DMA__CAN1, s_flexcanHandle[FLEXCAN_GetInstance(DMA__CAN1)]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
#if defined(DMA__CAN2)
void DMA_FLEXCAN2_INT_DriverIRQHandler(void)
{
assert(s_flexcanHandle[FLEXCAN_GetInstance(DMA__CAN2)]);
s_flexcanIsr(DMA__CAN2, s_flexcanHandle[FLEXCAN_GetInstance(DMA__CAN2)]);
/* Add for ARM errata 838869, affects Cortex-M4, Cortex-M4F Store immediate overlapping
exception return operation might vector to incorrect interrupt */
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
}
#endif
Reference in New Issue View Git Blame Copy Permalink