414 lines
14 KiB
C
414 lines
14 KiB
C
/*
|
|
* @brief LPC5410X Pin Interrupt and Pattern Match Registers and driver
|
|
*
|
|
* @note
|
|
* Copyright(C) NXP Semiconductors, 2014
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
* all warranties, express or implied, including all implied warranties of
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
* or liability for the use of the software, conveys no license or rights under any
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
|
* in the software without notification. NXP Semiconductors also makes no
|
|
* representation or warranty that such application will be suitable for the
|
|
* specified use without further testing or modification.
|
|
*
|
|
* @par
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
*/
|
|
|
|
#ifndef __PININT_5410X_H_
|
|
#define __PININT_5410X_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup PININT_5410X CHIP: LPC5410X Pin Interrupt and Pattern Match driver
|
|
* @ingroup CHIP_5410X_DRIVERS
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief LPC5410X Pin Interrupt and Pattern Match register block structure
|
|
*/
|
|
typedef struct { /*!< PIN_INT Structure */
|
|
__IO uint32_t ISEL; /*!< Pin Interrupt Mode register */
|
|
__IO uint32_t IENR; /*!< Pin Interrupt Enable (Rising) register */
|
|
__IO uint32_t SIENR; /*!< Set Pin Interrupt Enable (Rising) register */
|
|
__IO uint32_t CIENR; /*!< Clear Pin Interrupt Enable (Rising) register */
|
|
__IO uint32_t IENF; /*!< Pin Interrupt Enable Falling Edge / Active Level register */
|
|
__IO uint32_t SIENF; /*!< Set Pin Interrupt Enable Falling Edge / Active Level register */
|
|
__IO uint32_t CIENF; /*!< Clear Pin Interrupt Enable Falling Edge / Active Level address */
|
|
__IO uint32_t RISE; /*!< Pin Interrupt Rising Edge register */
|
|
__IO uint32_t FALL; /*!< Pin Interrupt Falling Edge register */
|
|
__IO uint32_t IST; /*!< Pin Interrupt Status register */
|
|
__IO uint32_t PMCTRL; /*!< GPIO pattern match interrupt control register */
|
|
__IO uint32_t PMSRC; /*!< GPIO pattern match interrupt bit-slice source register */
|
|
__IO uint32_t PMCFG; /*!< GPIO pattern match interrupt bit slice configuration register */
|
|
} LPC_PIN_INT_T;
|
|
|
|
/**
|
|
* LPC5410X Pin Interrupt and Pattern match engine register
|
|
* bit fields and macros
|
|
*/
|
|
|
|
/* PININT Interrupt Mode Mask */
|
|
#define PININT_ISEL_PMODE_MASK ((uint32_t) 0x00FF)
|
|
|
|
/* PININT Pattern Match Control Register Mask */
|
|
#define PININT_PMCTRL_MASK ((uint32_t) 0xFF000003)
|
|
|
|
/* PININT interrupt control register */
|
|
#define PININT_PMCTRL_PMATCH_SEL (1 << 0)
|
|
#define PININT_PMCTRL_RXEV_ENA (1 << 1)
|
|
|
|
/* PININT Bit slice source register bits */
|
|
#define PININT_SRC_BITSOURCE_START 8
|
|
#define PININT_SRC_BITSOURCE_MASK 7
|
|
|
|
/* PININT Bit slice configuration register bits */
|
|
#define PININT_SRC_BITCFG_START 8
|
|
#define PININT_SRC_BITCFG_MASK 7
|
|
|
|
/**
|
|
* LPC5410X Pin Interrupt channel values
|
|
*/
|
|
#define PININTCH0 (1 << 0)
|
|
#define PININTCH1 (1 << 1)
|
|
#define PININTCH2 (1 << 2)
|
|
#define PININTCH3 (1 << 3)
|
|
#define PININTCH4 (1 << 4)
|
|
#define PININTCH5 (1 << 5)
|
|
#define PININTCH6 (1 << 6)
|
|
#define PININTCH7 (1 << 7)
|
|
#define PININTCH(ch) (1 << (ch))
|
|
|
|
/**
|
|
* LPC5410X Pin Interrupt select enum values
|
|
*/
|
|
typedef enum Chip_PININT_SELECT {
|
|
PININTSELECT0 = 0,
|
|
PININTSELECT1 = 1,
|
|
PININTSELECT2 = 2,
|
|
PININTSELECT3 = 3,
|
|
PININTSELECT4 = 4,
|
|
PININTSELECT5 = 5,
|
|
PININTSELECT6 = 6,
|
|
PININTSELECT7 = 7
|
|
} Chip_PININT_SELECT_T;
|
|
|
|
/**
|
|
* LPC5410X Pin Matching Interrupt bit slice enum values
|
|
*/
|
|
typedef enum Chip_PININT_BITSLICE {
|
|
PININTBITSLICE0 = 0, /*!< PININT Bit slice 0 */
|
|
PININTBITSLICE1 = 1, /*!< PININT Bit slice 1 */
|
|
PININTBITSLICE2 = 2, /*!< PININT Bit slice 2 */
|
|
PININTBITSLICE3 = 3, /*!< PININT Bit slice 3 */
|
|
PININTBITSLICE4 = 4, /*!< PININT Bit slice 4 */
|
|
PININTBITSLICE5 = 5, /*!< PININT Bit slice 5 */
|
|
PININTBITSLICE6 = 6, /*!< PININT Bit slice 6 */
|
|
PININTBITSLICE7 = 7 /*!< PININT Bit slice 7 */
|
|
} Chip_PININT_BITSLICE_T;
|
|
|
|
/**
|
|
* LPC5410X Pin Matching Interrupt bit slice configuration enum values
|
|
*/
|
|
typedef enum Chip_PININT_BITSLICE_CFG {
|
|
PININT_PATTERNCONST1 = 0x0, /*!< Contributes to product term match */
|
|
PININT_PATTERNRISING = 0x1, /*!< Rising edge */
|
|
PININT_PATTERNFALLING = 0x2, /*!< Falling edge */
|
|
PININT_PATTERNRISINGORFALLING = 0x3, /*!< Rising or Falling edge */
|
|
PININT_PATTERNHIGH = 0x4, /*!< High level */
|
|
PININT_PATTERNLOW = 0x5, /*!< Low level */
|
|
PININT_PATTERNCONST0 = 0x6, /*!< Never contributes for match */
|
|
PININT_PATTERNEVENT = 0x7 /*!< Match occurs on event */
|
|
} Chip_PININT_BITSLICE_CFG_T;
|
|
|
|
/**
|
|
* @brief Initialize Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
* @note This function should be used after the Chip_GPIO_Init() function.
|
|
*/
|
|
STATIC INLINE void Chip_PININT_Init(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
Chip_Clock_EnablePeriphClock(SYSCON_CLOCK_PINT);
|
|
Chip_SYSCON_PeriphReset(RESET_PINT);
|
|
}
|
|
|
|
/**
|
|
* @brief De-Initialize Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DeInit(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
Chip_Clock_DisablePeriphClock(SYSCON_CLOCK_PINT);
|
|
}
|
|
|
|
/**
|
|
* @brief Configure the pins as edge sensitive in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_SetPinModeEdge(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->ISEL = (pPININT->ISEL & PININT_ISEL_PMODE_MASK) & ~pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Configure the pins as level sensitive in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_SetPinModeLevel(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->ISEL = (pPININT->ISEL & PININT_ISEL_PMODE_MASK) | pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return current PININT edge or level sensitive interrupt selection state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return A bifield containing the edge/level sensitive selection for each
|
|
* interrupt. Bit 0 = PININT0, 1 = PININT1, etc.
|
|
* For each bit, a 0 means the edge sensitive interrupt is selected, while a 1
|
|
* means the level sensitive interrupt is selected.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetPinMode(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->ISEL & PININT_ISEL_PMODE_MASK;
|
|
}
|
|
|
|
/**
|
|
* @brief Return current PININT rising edge or level interrupt enable state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return A bifield containing the rising edge/level enable for each
|
|
* interrupt. Bit 0 = PININT0, 1 = PININT1, etc.
|
|
* For each bit, a 0 means the rising edge/level interrupt is disabled, while a 1
|
|
* means it's enabled.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetHighEnabled(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->IENR;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable rising edge/level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to enable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_EnableIntHigh(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->SIENR = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable rising edge/level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to disable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DisableIntHigh(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->CIENR = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return current PININT falling edge or level interrupt active level enable state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return A bifield containing the falling edge/level interrupt active level enable for each
|
|
* interrupt. Bit 0 = PININT0, 1 = PININT1, etc.
|
|
* For each bit, a 0 means the falling edge is disabled/level interrupt active low is enabled, while a 1
|
|
* means the falling edge is enabled/level interrupt active high is enabled.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetLowEnabled(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->IENF;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable falling edge/level active level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to enable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_EnableIntLow(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->SIENF = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable low edge/level active level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to disable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DisableIntLow(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->CIENF = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return pin states that have a detected latched rising edge (RISE) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return PININT states (bit n = high) with a latched rise state detected
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetRiseStates(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->RISE;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears pin states that had a latched rising edge (RISE) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins with latched states to clear
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_ClearRiseStates(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->RISE = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return pin states that have a detected latched falling edge (FALL) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return PININT states (bit n = high) with a latched rise state detected
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetFallStates(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->FALL;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears pin states that had a latched falling edge (FALL) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins with latched states to clear
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_ClearFallStates(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->FALL = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Get interrupt status from Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Interrupt status (bit n for PININTn = high means interrupt ie pending)
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetIntStatus(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->IST;
|
|
}
|
|
|
|
/**
|
|
* @brief Clear interrupt status in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pin interrupts to clear (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_ClearIntStatus(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->IST = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Set source for pattern match in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param channelNum : PININT channel number (From 0 to 7)
|
|
* @param sliceNum : PININT slice number
|
|
* @return Nothing
|
|
*/
|
|
void Chip_PININT_SetPatternMatchSrc(LPC_PIN_INT_T *pPININT,
|
|
Chip_PININT_SELECT_T channelNum,
|
|
Chip_PININT_BITSLICE_T sliceNum);
|
|
|
|
/**
|
|
* @brief Configure the pattern matcch in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param sliceNum : PININT slice number
|
|
* @param slice_cfg : PININT slice configuration value (enum Chip_PININT_BITSLICE_CFG_T)
|
|
* @param end_point : If true, current slice is final component
|
|
* @return Nothing
|
|
*/
|
|
void Chip_PININT_SetPatternMatchConfig(LPC_PIN_INT_T *pPININT, Chip_PININT_BITSLICE_T sliceNum,
|
|
Chip_PININT_BITSLICE_CFG_T slice_cfg, bool end_point);
|
|
|
|
/**
|
|
* @brief Enable pattern match interrupts in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_EnablePatternMatch(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
pPININT->PMCTRL = (pPININT->PMCTRL & PININT_PMCTRL_MASK) | PININT_PMCTRL_PMATCH_SEL;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable pattern match interrupts in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DisablePatternMatch(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
pPININT->PMCTRL = (pPININT->PMCTRL & PININT_PMCTRL_MASK) & ~PININT_PMCTRL_PMATCH_SEL;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable RXEV output in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_EnablePatternMatchRxEv(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
pPININT->PMCTRL = (pPININT->PMCTRL & PININT_PMCTRL_MASK) | PININT_PMCTRL_RXEV_ENA;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable RXEV output in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DisablePatternMatchRxEv(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
pPININT->PMCTRL = (pPININT->PMCTRL & PININT_PMCTRL_MASK) & ~PININT_PMCTRL_RXEV_ENA;
|
|
}
|
|
|
|
/**
|
|
* @brief Return pattern match state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return 8 bit pattern match state, where a 1 in any bit indicates that
|
|
* the corresponding product term has matched by the current state
|
|
* of its inputs.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetPatternMatchState(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->PMCTRL >> 24;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __PININT_5410X_H_ */
|