384 lines
9.8 KiB
C
384 lines
9.8 KiB
C
/*
|
|
* File : usart.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rt-thread.org/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2017-10-10 Tanek the first version
|
|
*/
|
|
#include <rtthread.h>
|
|
#include "usart.h"
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_lpuart.h"
|
|
#include "fsl_iomuxc.h"
|
|
|
|
#ifdef RT_USING_UART
|
|
|
|
#if !defined(RT_USING_UART0) && !defined(RT_USING_UART1) && \
|
|
!defined(RT_USING_UART2) && !defined(RT_USING_UART3) && \
|
|
!defined(RT_USING_UART4) && !defined(RT_USING_UART5) && \
|
|
!defined(RT_USING_UART6) && !defined(RT_USING_UART7)
|
|
#error "Please define at least one UARTx"
|
|
|
|
#endif
|
|
|
|
#include <rtdevice.h>
|
|
|
|
/* imxrt uart driver */
|
|
struct imxrt_uart
|
|
{
|
|
LPUART_Type * uart_base;
|
|
IRQn_Type irqn;
|
|
|
|
struct rt_serial_device * serial;
|
|
char *device_name;
|
|
};
|
|
|
|
static void uart_isr(struct rt_serial_device *serial);
|
|
|
|
#if defined(RT_USING_UART1)
|
|
struct rt_serial_device serial1;
|
|
|
|
void LPUART1_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial1);
|
|
}
|
|
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#if defined(RT_USING_UART2)
|
|
struct rt_serial_device serial2;
|
|
|
|
void USART2_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial2);
|
|
}
|
|
|
|
#endif /* RT_USING_UART2 */
|
|
|
|
#if defined(RT_USING_UART3)
|
|
struct rt_serial_device serial3;
|
|
|
|
void UART3_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial3);
|
|
}
|
|
|
|
#endif /* RT_USING_UART3 */
|
|
|
|
#if defined(RT_USING_UART4)
|
|
struct rt_serial_device serial4;
|
|
|
|
void UART4_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial4);
|
|
}
|
|
#endif /* RT_USING_UART4 */
|
|
|
|
#if defined(RT_USING_UART5)
|
|
struct rt_serial_device serial5;
|
|
|
|
void USART5_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial5);
|
|
}
|
|
|
|
#endif /* RT_USING_UART5 */
|
|
|
|
#if defined(RT_USING_UART6)
|
|
struct rt_serial_device serial6;
|
|
|
|
void UART6_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial6);
|
|
}
|
|
|
|
#endif /* RT_USING_UART6 */
|
|
|
|
#if defined(RT_USING_UART7)
|
|
struct rt_serial_device serial7;
|
|
|
|
void UART7_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial7);
|
|
}
|
|
|
|
#endif /* RT_USING_UART7 */
|
|
|
|
#if defined(RT_USING_UART8)
|
|
struct rt_serial_device serial8;
|
|
|
|
void UART7_IRQHandler(void)
|
|
{
|
|
uart_isr(&serial8);
|
|
}
|
|
|
|
#endif /* RT_USING_UART8 */
|
|
|
|
static const struct imxrt_uart uarts[] = {
|
|
#ifdef RT_USING_UART1
|
|
{
|
|
LPUART1,
|
|
LPUART1_IRQn,
|
|
&serial1,
|
|
"uart1",
|
|
},
|
|
#endif
|
|
|
|
};
|
|
|
|
/* Get debug console frequency. */
|
|
uint32_t BOARD_DebugConsoleSrcFreq(void)
|
|
{
|
|
uint32_t freq;
|
|
|
|
/* To make it simple, we assume default PLL and divider settings, and the only variable
|
|
from application is use PLL3 source or OSC source */
|
|
if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */
|
|
{
|
|
freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
|
|
}
|
|
else
|
|
{
|
|
freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief UART MSP Initialization
|
|
* This function configures the hardware resources used in this example:
|
|
* - Peripheral's clock enable
|
|
* - Peripheral's GPIO Configuration
|
|
* - NVIC configuration for UART interrupt request enable
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void imxrt_uart_gpio_init(struct imxrt_uart *uart)
|
|
{
|
|
if (uart->uart_base == LPUART1)
|
|
{
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 is configured as LPUART1_TX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 is configured as LPUART1_RX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
}
|
|
else
|
|
{
|
|
RT_ASSERT(RT_NULL);
|
|
}
|
|
}
|
|
|
|
static rt_err_t imxrt_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct imxrt_uart *uart;
|
|
lpuart_config_t config;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
|
|
uart = (struct imxrt_uart *)serial->parent.user_data;
|
|
|
|
imxrt_uart_gpio_init(uart);
|
|
|
|
LPUART_GetDefaultConfig(&config);
|
|
config.baudRate_Bps = cfg->baud_rate;
|
|
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_7:
|
|
config.dataBitsCount = kLPUART_SevenDataBits;
|
|
break;
|
|
|
|
default:
|
|
config.dataBitsCount = kLPUART_EightDataBits;
|
|
break;
|
|
}
|
|
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_2:
|
|
config.stopBitCount = kLPUART_TwoStopBit;
|
|
break;
|
|
default:
|
|
config.stopBitCount = kLPUART_OneStopBit;
|
|
break;
|
|
}
|
|
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_ODD:
|
|
config.parityMode = kLPUART_ParityOdd;
|
|
break;
|
|
case PARITY_EVEN:
|
|
config.parityMode = kLPUART_ParityEven;
|
|
break;
|
|
default:
|
|
config.parityMode = kLPUART_ParityDisabled;
|
|
break;
|
|
}
|
|
|
|
config.enableTx = true;
|
|
config.enableRx = true;
|
|
|
|
LPUART_Init(uart->uart_base, &config, BOARD_DebugConsoleSrcFreq());
|
|
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t imxrt_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct imxrt_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct imxrt_uart *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable interrupt */
|
|
LPUART_DisableInterrupts(uart->uart_base, kLPUART_RxDataRegFullInterruptEnable);
|
|
/* disable rx irq */
|
|
DisableIRQ(uart->irqn);
|
|
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable interrupt */
|
|
LPUART_EnableInterrupts(uart->uart_base, kLPUART_RxDataRegFullInterruptEnable);
|
|
/* enable rx irq */
|
|
EnableIRQ(uart->irqn);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int imxrt_putc(struct rt_serial_device *serial, char ch)
|
|
{
|
|
struct imxrt_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct imxrt_uart *)serial->parent.user_data;
|
|
|
|
LPUART_WriteByte(uart->uart_base, ch);
|
|
while(!(LPUART_GetStatusFlags(uart->uart_base) & kLPUART_TxDataRegEmptyFlag));
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int imxrt_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct imxrt_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct imxrt_uart *)serial->parent.user_data;
|
|
|
|
ch = -1;
|
|
if (LPUART_GetStatusFlags(uart->uart_base) & kLPUART_RxDataRegFullFlag)
|
|
ch = LPUART_ReadByte(uart->uart_base);
|
|
return ch;
|
|
}
|
|
|
|
/**
|
|
* Uart common interrupt process. This need add to uart ISR.
|
|
*
|
|
* @param serial serial device
|
|
*/
|
|
static void uart_isr(struct rt_serial_device *serial)
|
|
{
|
|
struct imxrt_uart *uart;
|
|
LPUART_Type *base;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
uart = (struct imxrt_uart *) serial->parent.user_data;
|
|
RT_ASSERT(uart != RT_NULL);
|
|
|
|
base = uart->uart_base;
|
|
RT_ASSERT(base != RT_NULL);
|
|
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
/* UART in mode Receiver -------------------------------------------------*/
|
|
if (LPUART_GetStatusFlags(base) & kLPUART_RxDataRegFullFlag)
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
/* If RX overrun. */
|
|
if (LPUART_STAT_OR_MASK & base->STAT)
|
|
{
|
|
/* Clear overrun flag, otherwise the RX does not work. */
|
|
base->STAT = ((base->STAT & 0x3FE00000U) | LPUART_STAT_OR_MASK);
|
|
}
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
|
|
static const struct rt_uart_ops imxrt_uart_ops =
|
|
{
|
|
imxrt_configure,
|
|
imxrt_control,
|
|
imxrt_putc,
|
|
imxrt_getc,
|
|
};
|
|
|
|
int imxrt_hw_usart_init(void)
|
|
{
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++)
|
|
{
|
|
uarts[i].serial->ops = &imxrt_uart_ops;
|
|
uarts[i].serial->config = config;
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(uarts[i].serial,
|
|
uarts[i].device_name,
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
(void *)&uarts[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(imxrt_hw_usart_init);
|
|
|
|
#endif /*RT_USING_UART*/
|