rtt-f030/bsp/rm48x50/HALCoGen/include/reg_pinmux.h

130 lines
4.4 KiB
C

/** @file reg_pinmux.h
* @brief PINMUX Register Layer Header File
* @date 23.May.2013
* @version 03.05.01
*
* This file contains:
* - Definitions
* - Types
* - Interface Prototypes
* .
* which are relevant for the PINMUX driver.
*/
/* (c) Texas Instruments 2009-2013, All rights reserved. */
#ifndef __REG_PINMUX_H__
#define __REG_PINMUX_H__
#include "sys_common.h"
/* USER CODE BEGIN (0) */
/* USER CODE END */
/* IOMM Revision and Boot Register */
#define REVISION_REG (*(volatile uint32 *)0xFFFFEA00U)
#define ENDIAN_REG (*(volatile uint32 *)0xFFFFEA20U)
/* IOMM Error and Fault Registers */
/** @struct iommErrFault
* @brief IOMM Error and Fault Register Definition
*
* This structure is used to access the IOMM Error and Fault registers.
*/
typedef volatile struct iommErrFault
{
uint32 ERR_RAW_STATUS_REG; /* Error Raw Status / Set Register */
uint32 ERR_ENABLED_STATUS_REG; /* Error Enabled Status / Clear Register */
uint32 ERR_ENABLE_REG; /* Error Signaling Enable Register */
uint32 ERR_ENABLE_CLR_REG; /* Error Signaling Enable Clear Register */
uint32 rsvd; /* Reserved */
uint32 FAULT_ADDRESS_REG; /* Fault Address Register */
uint32 FAULT_STATUS_REG; /* Fault Status Register */
uint32 FAULT_CLEAR_REG; /* Fault Clear Register */
} iommErrFault_t;
/* Pinmux Register Frame Definition */
/** @struct pinMuxKicker
* @brief Pin Muxing Kicker Register Definition
*
* This structure is used to access the Pin Muxing Kicker registers.
*/
typedef volatile struct pinMuxKicker
{
uint32 KICKER0; /* kicker 0 register */
uint32 KICKER1; /* kicker 1 register */
} pinMuxKICKER_t;
/** @struct pinMuxBase
* @brief PINMUX Register Definition
*
* This structure is used to access the PINMUX module registers.
*/
/** @typedef pinMuxBASE_t
* @brief PINMUX Register Frame Type Definition
*
* This type is used to access the PINMUX Registers.
*/
typedef volatile struct pinMuxBase
{
uint32 PINMMR0; /**< 0xEB10 Pin Mux 0 register*/
uint32 PINMMR1; /**< 0xEB14 Pin Mux 1 register*/
uint32 PINMMR2; /**< 0xEB18 Pin Mux 2 register*/
uint32 PINMMR3; /**< 0xEB1C Pin Mux 3 register*/
uint32 PINMMR4; /**< 0xEB20 Pin Mux 4 register*/
uint32 PINMMR5; /**< 0xEB24 Pin Mux 5 register*/
uint32 PINMMR6; /**< 0xEB28 Pin Mux 6 register*/
uint32 PINMMR7; /**< 0xEB2C Pin Mux 7 register*/
uint32 PINMMR8; /**< 0xEB30 Pin Mux 8 register*/
uint32 PINMMR9; /**< 0xEB34 Pin Mux 9 register*/
uint32 PINMMR10; /**< 0xEB38 Pin Mux 10 register*/
uint32 PINMMR11; /**< 0xEB3C Pin Mux 11 register*/
uint32 PINMMR12; /**< 0xEB40 Pin Mux 12 register*/
uint32 PINMMR13; /**< 0xEB44 Pin Mux 13 register*/
uint32 PINMMR14; /**< 0xEB48 Pin Mux 14 register*/
uint32 PINMMR15; /**< 0xEB4C Pin Mux 15 register*/
uint32 PINMMR16; /**< 0xEB50 Pin Mux 16 register*/
uint32 PINMMR17; /**< 0xEB54 Pin Mux 17 register*/
uint32 PINMMR18; /**< 0xEB58 Pin Mux 18 register*/
uint32 PINMMR19; /**< 0xEB5C Pin Mux 19 register*/
uint32 PINMMR20; /**< 0xEB60 Pin Mux 20 register*/
uint32 PINMMR21; /**< 0xEB64 Pin Mux 21 register*/
uint32 PINMMR22; /**< 0xEB68 Pin Mux 22 register*/
uint32 PINMMR23; /**< 0xEB6C Pin Mux 23 register*/
uint32 PINMMR24; /**< 0xEB70 Pin Mux 24 register*/
uint32 PINMMR25; /**< 0xEB74 Pin Mux 25 register*/
uint32 PINMMR26; /**< 0xEB78 Pin Mux 26 register*/
uint32 PINMMR27; /**< 0xEB7C Pin Mux 27 register*/
uint32 PINMMR28; /**< 0xEB80 Pin Mux 28 register*/
uint32 PINMMR29; /**< 0xEB84 Pin Mux 29 register*/
uint32 PINMMR30; /**< 0xEB88 Pin Mux 30 register*/
}pinMuxBASE_t;
/** @def iommErrFaultReg
* @brief IOMM Error Fault Register Frame Pointer
*
* This pointer is used to control IOMM Error and Fault across the device.
*/
#define iommErrFaultReg ((iommErrFault_t *) 0xFFFFEAEOU)
/** @def kickerReg
* @brief Pin Muxing Kicker Register Frame Pointer
*
* This pointer is used to enable and disable muxing accross the device.
*/
#define kickerReg ((pinMuxKICKER_t *) 0xFFFFEA38U)
/** @def pinMuxReg
* @brief Pin Muxing Control Register Frame Pointer
*
* This pointer is used to set the muxing registers accross the device.
*/
#define pinMuxReg ((pinMuxBASE_t *) 0xFFFFEB10U)
/* USER CODE BEGIN (1) */
/* USER CODE END */
#endif