rtt-f030/bsp/nuvoton_m451/Libraries/StdDriver/inc/eadc.h

570 lines
33 KiB
C

/******************************************************************************
* @file eadc.h
* @version V0.10
* $Revision: 18 $
* $Date: 15/08/11 10:26a $
* @brief M451 series EADC driver header file
*
* @note
* Copyright (C) 2013~2015 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __EADC_H__
#define __EADC_H__
/*---------------------------------------------------------------------------------------------------------*/
/* Include related headers */
/*---------------------------------------------------------------------------------------------------------*/
#include "M451Series.h"
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup EADC_Driver EADC Driver
@{
*/
/** @addtogroup EADC_EXPORTED_CONSTANTS EADC Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* EADC_CTL Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define EADC_CTL_DIFFEN_SINGLE_END (0UL<<EADC_CTL_DIFFEN_Pos) /*!< Single-end input mode */
#define EADC_CTL_DIFFEN_DIFFERENTIAL (1UL<<EADC_CTL_DIFFEN_Pos) /*!< Differential input mode */
#define EADC_CTL_DMOF_STRAIGHT_BINARY (0UL<<EADC_CTL_DMOF_Pos) /*!< Select the straight binary format as the output format of the conversion result */
#define EADC_CTL_DMOF_TWOS_COMPLEMENT (1UL<<EADC_CTL_DMOF_Pos) /*!< Select the 2's complement format as the output format of the conversion result */
#define EADC_CTL_SMPTSEL1 (0UL<<EADC_CTL_SMPTSEL_Pos) /*!< 1 ADC clock sampling time */
#define EADC_CTL_SMPTSEL2 (1UL<<EADC_CTL_SMPTSEL_Pos) /*!< 2 ADC clock sampling time */
#define EADC_CTL_SMPTSEL3 (2UL<<EADC_CTL_SMPTSEL_Pos) /*!< 3 ADC clock sampling time */
#define EADC_CTL_SMPTSEL4 (3UL<<EADC_CTL_SMPTSEL_Pos) /*!< 4 ADC clock sampling time */
#define EADC_CTL_SMPTSEL5 (4UL<<EADC_CTL_SMPTSEL_Pos) /*!< 5 ADC clock sampling time */
#define EADC_CTL_SMPTSEL6 (5UL<<EADC_CTL_SMPTSEL_Pos) /*!< 6 ADC clock sampling time */
#define EADC_CTL_SMPTSEL7 (6UL<<EADC_CTL_SMPTSEL_Pos) /*!< 7 ADC clock sampling time */
#define EADC_CTL_SMPTSEL8 (7UL<<EADC_CTL_SMPTSEL_Pos) /*!< 8 ADC clock sampling time */
/*---------------------------------------------------------------------------------------------------------*/
/* EADC_SCTL Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define EADC_SCTL_CHSEL(x) ((x) << EADC_SCTL_CHSEL_Pos) /*!< A/D sample module channel selection */
#define EADC_SCTL_TRGDLYDIV(x) ((x) << EADC_SCTL_TRGDLYDIV_Pos) /*!< A/D sample module start of conversion trigger delay clock divider selection */
#define EADC_SCTL_TRGDLYCNT(x) ((x) << EADC_SCTL_TRGDLYCNT_Pos) /*!< A/D sample module start of conversion trigger delay time */
#define EADC_SOFTWARE_TRIGGER (0UL<<EADC_SCTL_TRGSEL_Pos) /*!< Software trigger */
#define EADC_FALLING_EDGE_TRIGGER (EADC_SCTL_EXTFEN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin falling edge trigger */
#define EADC_RISING_EDGE_TRIGGER (EADC_SCTL_EXTREN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin rising edge trigger */
#define EADC_FALLING_RISING_EDGE_TRIGGER (EADC_SCTL_EXTFEN_Msk | EADC_SCTL_EXTREN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin both falling and rising edge trigger */
#define EADC_ADINT0_TRIGGER (2UL<<EADC_SCTL_TRGSEL_Pos) /*!< ADC ADINT0 interrupt EOC pulse trigger */
#define EADC_ADINT1_TRIGGER (3UL<<EADC_SCTL_TRGSEL_Pos) /*!< ADC ADINT1 interrupt EOC pulse trigger */
#define EADC_TIMER0_TRIGGER (4UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer0 overflow pulse trigger */
#define EADC_TIMER1_TRIGGER (5UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer1 overflow pulse trigger */
#define EADC_TIMER2_TRIGGER (6UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer2 overflow pulse trigger */
#define EADC_TIMER3_TRIGGER (7UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer3 overflow pulse trigger */
#define EADC_PWM0TG0_TRIGGER (8UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG0 trigger */
#define EADC_PWM0TG1_TRIGGER (9UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG1 trigger */
#define EADC_PWM0TG2_TRIGGER (0xAUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG2 trigger */
#define EADC_PWM0TG3_TRIGGER (0xBUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG3 trigger */
#define EADC_PWM0TG4_TRIGGER (0xCUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG4 trigger */
#define EADC_PWM0TG5_TRIGGER (0xDUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG5 trigger */
#define EADC_PWM1TG0_TRIGGER (0xEUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG0 trigger */
#define EADC_PWM1TG1_TRIGGER (0xFUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG1 trigger */
#define EADC_PWM1TG2_TRIGGER (0x10UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG2 trigger */
#define EADC_PWM1TG3_TRIGGER (0x11UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG3 trigger */
#define EADC_PWM1TG4_TRIGGER (0x12UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG4 trigger */
#define EADC_PWM1TG5_TRIGGER (0x13UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG5 trigger */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_1 (0<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/1 */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_2 (0x1UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/2 */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_4 (0x2UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/4 */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_16 (0x3UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/16 */
/*---------------------------------------------------------------------------------------------------------*/
/* EADC_CMP Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define EADC_CMP_CMPCOND_LESS_THAN (0UL<<EADC_CMP_CMPCOND_Pos) /*!< The compare condition is "less than" */
#define EADC_CMP_CMPCOND_GREATER_OR_EQUAL (1UL<<EADC_CMP_CMPCOND_Pos) /*!< The compare condition is "greater than or equal to" */
#define EADC_CMP_CMPWEN_ENABLE (EADC_CMP_CMPWEN_Msk) /*!< Compare window mode enable */
#define EADC_CMP_CMPWEN_DISABLE (~EADC_CMP_CMPWEN_Msk) /*!< Compare window mode disable */
#define EADC_CMP_ADCMPIE_ENABLE (EADC_CMP_ADCMPIE_Msk) /*!< A/D result compare interrupt enable */
#define EADC_CMP_ADCMPIE_DISABLE (~EADC_CMP_ADCMPIE_Msk) /*!< A/D result compare interrupt disable */
/*@}*/ /* end of group EADC_EXPORTED_CONSTANTS */
/** @addtogroup EADC_EXPORTED_FUNCTIONS EADC Exported Functions
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* EADC Macro Definitions */
/*---------------------------------------------------------------------------------------------------------*/
/**
* @brief A/D Converter Control Circuits Reset.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details ADCRST bit (EADC_CT[1]) remains 1 during ADC reset, when ADC reset end, the ADCRST bit is automatically cleared to 0.
*/
#define EADC_CONV_RESET(eadc) ((eadc)->CTL |= EADC_CTL_ADRST_Msk)
/**
* @brief Enable PDMA transfer.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details When A/D conversion is completed, the converted data is loaded into EADC_DATn (n: 0 ~ 18) register,
* user can enable this bit to generate a PDMA data transfer request.
* @note When set PDMAEN bit (EADC_CTL[11]), user must set ADINTENn (EADC_CTL[5:2], n=0~3) = 0 to disable interrupt.
*/
#define EADC_ENABLE_PDMA(eadc) ((eadc)->CTL |= EADC_CTL_PDMAEN_Msk)
/**
* @brief Disable PDMA transfer.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable PDMA transfer.
*/
#define EADC_DISABLE_PDMA(eadc) ((eadc)->CTL &= (~EADC_CTL_PDMAEN_Msk))
/**
* @brief Enable double buffer mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 3.
* @return None
* @details The ADC controller supports a double buffer mode in sample module 0~3.
* If user enable DBMEN (EADC_SCTLn[23], n=0~3), the double buffer mode will enable.
*/
#define EADC_ENABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] |= EADC_SCTL_DBMEN_Msk)
/**
* @brief Disable double buffer mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 3.
* @return None
* @details Sample has one sample result register.
*/
#define EADC_DISABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] &= ~EADC_SCTL_DBMEN_Msk)
/**
* @brief Set ADIFn at A/D end of conversion.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 15.
* @return None
* @details The A/D converter generates ADIFn (EADC_STATUS2[3:0], n=0~3) at the start of conversion.
*/
#define EADC_ENABLE_INT_POSITION(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] |= EADC_SCTL_INTPOS_Msk)
/**
* @brief Set ADIFn at A/D start of conversion.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 15.
* @return None
* @details The A/D converter generates ADIFn (EADC_STATUS2[3:0], n=0~3) at the end of conversion.
*/
#define EADC_DISABLE_INT_POSITION(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] &= ~EADC_SCTL_INTPOS_Msk)
/**
* @brief Enable the interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask Decides the combination of interrupt status bits. Each bit corresponds to a interrupt status.
* This parameter decides which interrupts will be enabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3.
* @return None
* @details The A/D converter generates a conversion end ADIFn (EADC_STATUS2[n]) upon the end of specific sample module A/D conversion.
* If ADCIENn bit (EADC_CTL[n+2]) is set then conversion end interrupt request ADINTn is generated (n=0~3).
*/
#define EADC_ENABLE_INT(eadc, u32Mask) ((eadc)->CTL |= ((u32Mask) << EADC_CTL_ADCIEN0_Pos))
/**
* @brief Disable the interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask Decides the combination of interrupt status bits. Each bit corresponds to a interrupt status.
* This parameter decides which interrupts will be disabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3.
* @return None
* @details Specific sample module A/D ADINT0 interrupt function Disabled.
*/
#define EADC_DISABLE_INT(eadc, u32Mask) ((eadc)->CTL &= ~((u32Mask) << EADC_CTL_ADCIEN0_Pos))
/**
* @brief Enable the sample module interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3.
* @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status.
* This parameter decides which sample module interrupts will be enabled, valid range are between 1~0x7FFFF.
* @return None
* @details There are 4 ADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address.
*/
#define EADC_ENABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] |= (u32ModuleMask))
/**
* @brief Disable the sample module interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3.
* @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status.
* This parameter decides which sample module interrupts will be disabled, valid range are between 1~0x7FFFF.
* @return None
* @details There are 4 ADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address.
*/
#define EADC_DISABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] &= ~(u32ModuleMask))
/**
* @brief Set the input mode output format.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Format Decides the output format. Valid values are:
* - \ref EADC_CTL_DMOF_STRAIGHT_BINARY :Select the straight binary format as the output format of the conversion result.
* - \ref EADC_CTL_DMOF_TWOS_COMPLEMENT :Select the 2's complement format as the output format of the conversion result.
* @return None
* @details The macro is used to set A/D input mode output format.
*/
#define EADC_SET_DMOF(eadc, u32Format) ((eadc)->CTL = ((eadc)->CTL & ~EADC_CTL_DMOF_Msk) | (u32Format))
/**
* @brief Start the A/D conversion.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module.
* This parameter decides which sample module will be conversion, valid range are between 1~0x7FFFF.
* Bit 0 is sample module 0, bit 1 is sample module 1..., bit 18 is sample module 18.
* @return None
* @details After write EADC_SWTRG register to start ADC conversion, the EADC_PENDSTS register will show which SAMPLE will conversion.
*/
#define EADC_START_CONV(eadc, u32ModuleMask) ((eadc)->SWTRG = (u32ModuleMask))
/**
* @brief Cancel the conversion for sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module.
* This parameter decides which sample module will stop the conversion, valid range are between 1~0x7FFFF.
* Bit 0 is sample module 0, bit 1 is sample module 1..., bit 18 is sample module18.
* @return None
* @details If user want to disable the conversion of the sample module, user can write EADC_PENDSTS register to clear it.
*/
#define EADC_STOP_CONV(eadc, u32ModuleMask) ((eadc)->PENDSTS = (u32ModuleMask))
/**
* @brief Get the conversion pending flag.
* @param[in] eadc The pointer of the specified EADC module.
* @return Return the conversion pending sample module.
* @details This STPFn(EADC_PENDSTS[18:0]) bit remains 1 during pending state, when the respective ADC conversion is end,
* the STPFn (n=0~18) bit is automatically cleared to 0.
*/
#define EADC_GET_PENDING_CONV(eadc) ((eadc)->PENDSTS)
/**
* @brief Get the conversion data of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 18.
* @return Return the conversion data of the user-specified sample module.
* @details This macro is used to read RESULT bit (EADC_DATn[15:0], n=0~18) field to get conversion data.
*/
#define EADC_GET_CONV_DATA(eadc, u32ModuleNum) ((eadc)->DAT[(u32ModuleNum)] & EADC_DAT_RESULT_Msk)
/**
* @brief Get the data overrun flag of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of data overrun status bits. Each bit corresponds to a data overrun status, valid range are between 1~0x7FFFF.
* @return Return the data overrun flag of the user-specified sample module.
* @details This macro is used to read OV bit (EADC_STATUS0[31:16], EADC_STATUS1[18:16]) field to get data overrun status.
*/
#define EADC_GET_DATA_OVERRUN_FLAG(eadc, u32ModuleMask) ((((eadc)->STATUS0 >> EADC_STATUS0_OV_Pos) | ((eadc)->STATUS1 & EADC_STATUS1_OV_Msk)) & (u32ModuleMask))
/**
* @brief Get the data valid flag of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of data valid status bits. Each bit corresponds to a data valid status, valid range are between 1~0x7FFFF.
* @return Return the data valid flag of the user-specified sample module.
* @details This macro is used to read VALID bit (EADC_STATUS0[15:0], EADC_STATUS1[1:0]) field to get data overrun status.
*/
#define EADC_GET_DATA_VALID_FLAG(eadc, u32ModuleMask) ((((eadc)->STATUS0 & EADC_STATUS0_VALID_Msk) | (((eadc)->STATUS1 & EADC_STATUS1_VALID_Msk) << 16)) & (u32ModuleMask))
/**
* @brief Get the double data of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 18.
* @return Return the double data of the user-specified sample module.
* @details This macro is used to read RESULT bit (EADC_DDATn[15:0], n=0~3) field to get conversion data.
*/
#define EADC_GET_DOUBLE_DATA(eadc, u32ModuleNum) ((eadc)->DDAT[(u32ModuleNum)] & EADC_DDAT_RESULT_Msk)
/**
* @brief Get the user-specified interrupt flags.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask The combination of interrupt status bits. Each bit corresponds to a interrupt status.
* Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3.
* Bit 4 is ADCMPF0, bit 5 is ADCMPF1..., bit 7 is ADCMPF3.
* @return Return the user-specified interrupt flags.
* @details This macro is used to get the user-specified interrupt flags.
*/
#define EADC_GET_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS2 & (u32Mask))
/**
* @brief Get the user-specified sample module overrun flags.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status, valid range are between 1~0x7FFFF.
* @return Return the user-specified sample module overrun flags.
* @details This macro is used to get the user-specified sample module overrun flags.
*/
#define EADC_GET_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) ((eadc)->OVSTS & (u32ModuleMask))
/**
* @brief Clear the selected interrupt status bits.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask The combination of compare interrupt status bits. Each bit corresponds to a compare interrupt status.
* Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3.
* Bit 4 is ADCMPF0, bit 5 is ADCMPF1..., bit 7 is ADCMPF3.
* @return None
* @details This macro is used to clear clear the selected interrupt status bits.
*/
#define EADC_CLR_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS2 = (u32Mask))
/**
* @brief Clear the selected sample module overrun status bits.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status.
* Bit 0 is SPOVF0, bit 1 is SPOVF1..., bit 18 is SPOVF18.
* @return None
* @details This macro is used to clear the selected sample module overrun status bits.
*/
#define EADC_CLR_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) ((eadc)->OVSTS = (u32ModuleMask))
/**
* @brief Check all sample module A/D result data register overrun flags.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of sample module data register overrun flag is set to 1.
* @retval 1 Any one of sample module data register overrun flag is set to 1.
* @details The AOV bit (EADC_STATUS2[27]) will keep 1 when any one of sample module data register overrun flag OVn (EADC_DATn[16]) is set to 1.
*/
#define EADC_IS_DATA_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_AOV_Msk) >> EADC_STATUS2_AOV_Pos)
/**
* @brief Check all sample module A/D result data register valid flags.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of sample module data register valid flag is set to 1.
* @retval 1 Any one of sample module data register valid flag is set to 1.
* @details The AVALID bit (EADC_STATUS2[26]) will keep 1 when any one of sample module data register valid flag VALIDn (EADC_DATn[17]) is set to 1.
*/
#define EADC_IS_DATA_VALID(eadc) (((eadc)->STATUS2 & EADC_STATUS2_AVALID_Msk) >> EADC_STATUS2_AVALID_Pos)
/**
* @brief Check all A/D sample module start of conversion overrun flags.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of sample module event overrun flag is set to 1.
* @retval 1 Any one of sample module event overrun flag is set to 1.
* @details The STOVF bit (EADC_STATUS2[25]) will keep 1 when any one of sample module event overrun flag SPOVFn (EADC_OVSTS[n]) is set to 1.
*/
#define EADC_IS_SAMPLE_MODULE_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_STOVF_Msk) >> EADC_STATUS2_STOVF_Pos)
/**
* @brief Check all A/D interrupt flag overrun bits.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of ADINT interrupt flag is overwritten to 1.
* @retval 1 Any one of ADINT interrupt flag is overwritten to 1.
* @details The ADOVIF bit (EADC_STATUS2[24]) will keep 1 when any one of ADINT interrupt flag ADOVIFn (EADC_STATUS2[11:8]) is overwritten to 1.
*/
#define EADC_IS_INT_FLAG_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_ADOVIF_Msk) >> EADC_STATUS2_ADOVIF_Pos)
/**
* @brief Get the busy state of EADC.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 Idle state.
* @retval 1 Busy state.
* @details This macro is used to read BUSY bit (EADC_STATUS2[23]) to get busy state.
*/
#define EADC_IS_BUSY(eadc) (((eadc)->STATUS2 & EADC_STATUS2_BUSY_Msk) >> EADC_STATUS2_BUSY_Pos)
/**
* @brief Configure the comparator 0 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP0(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 0 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
*/
#define EADC_ENABLE_CMP0(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
u32MatchCount) ((eadc)->CMP[0] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
EADC_CMP_ADCMPEN_Msk))
/**
* @brief Configure the comparator 1 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP1(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 1 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
*/
#define EADC_ENABLE_CMP1(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
u32MatchCount) ((eadc)->CMP[1] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
EADC_CMP_ADCMPEN_Msk))
/**
* @brief Configure the comparator 2 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP2(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 2 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
*/
#define EADC_ENABLE_CMP2(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
u32MatchCount) ((eadc)->CMP[2] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
EADC_CMP_ADCMPEN_Msk))
/**
* @brief Configure the comparator 3 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 1~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP3(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 3 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
*/
#define EADC_ENABLE_CMP3(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
u32MatchCount) ((eadc)->CMP[3] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
EADC_CMP_ADCMPEN_Msk))
/**
* @brief Enable the compare window mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are 0 and 2.
* @return None
* @details ADCMPF0 (EADC_STATUS2[4]) will be set when both EADC_CMP0 and EADC_CMP1 compared condition matched.
*/
#define EADC_ENABLE_CMP_WINDOW_MODE(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP_CMPWEN_Msk)
/**
* @brief Disable the compare window mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are 0 and 2.
* @return None
* @details ADCMPF2 (EADC_STATUS2[6]) will be set when both EADC_CMP2 and EADC_CMP3 compared condition matched.
*/
#define EADC_DISABLE_CMP_WINDOW_MODE(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP_CMPWEN_Msk)
/**
* @brief Enable the compare interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are from 0 to 3.
* @return None
* @details If the compare function is enabled and the compare condition matches the setting of CMPCOND (EADC_CMPn[2], n=0~3)
* and CMPMCNT (EADC_CMPn[11:8], n=0~3), ADCMPFn (EADC_STATUS2[7:4], n=0~3) will be asserted, in the meanwhile,
* if ADCMPIE is set to 1, a compare interrupt request is generated.
*/
#define EADC_ENABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP_ADCMPIE_Msk)
/**
* @brief Disable the compare interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are from 0 to 3.
* @return None
* @details This macro is used to disable the compare interrupt.
*/
#define EADC_DISABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP_ADCMPIE_Msk)
/**
* @brief Disable comparator 0.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 0.
*/
#define EADC_DISABLE_CMP0(eadc) ((eadc)->CMP[0] = 0)
/**
* @brief Disable comparator 1.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 1.
*/
#define EADC_DISABLE_CMP1(eadc) ((eadc)->CMP[1] = 0)
/**
* @brief Disable comparator 2.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 2.
*/
#define EADC_DISABLE_CMP2(eadc) ((eadc)->CMP[2] = 0)
/**
* @brief Disable comparator 3.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 3.
*/
#define EADC_DISABLE_CMP3(eadc) ((eadc)->CMP[3] = 0)
/*---------------------------------------------------------------------------------------------------------*/
/* Define EADC functions prototype */
/*---------------------------------------------------------------------------------------------------------*/
void EADC_Open(EADC_T *eadc, uint32_t u32InputMode);
void EADC_Close(EADC_T *eadc);
void EADC_ConfigSampleModule(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32TriggerSource, uint32_t u32Channel);
void EADC_SetTriggerDelayTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32TriggerDelayTime, uint32_t u32DelayClockDivider);
void EADC_SetInternalSampleTime(EADC_T *eadc, uint32_t u32SampleTime);
void EADC_SetExtendSampleTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32ExtendSampleTime);
/*@}*/ /* end of group EADC_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group EADC_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif //__EADC_H__
/*** (C) COPYRIGHT 2013~2015 Nuvoton Technology Corp. ***/