rtt-f030/bsp/fh8620/libraries/startup/gcc/start_gcc.S

417 lines
10 KiB
ArmAsm

/*
* This file is part of FH8620 BSP for RT-Thread distribution.
*
* Copyright (c) 2016 Shanghai Fullhan Microelectronics Co., Ltd.
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Visit http://www.fullhan.com to get contact with Fullhan.
*
* Change Logs:
* Date Author Notes
*/
#include <rtconfig.h>
#include <armv6.h>
#define CONFIG_STACKSIZE 512
#define FPEXC_EN (1 << 30) /* VFP enable bit */
.equ I_BIT, 0x80 @ when I bit is set, IRQ is disabled
.equ F_BIT, 0x40 @ when F bit is set, FIQ is disabled
#.equ USERMODE, 0x10
#.equ FIQMODE, 0x11
#.equ IRQMODE, 0x12
#.equ SVCMODE, 0x13
#.equ ABORTMODE, 0x17
#.equ UNDEFMODE, 0x1b
#.equ MODEMASK, 0x1f
#.equ NOINT, 0xc0
.equ RAM_BASE, 0x00000000 /*Start address of RAM*/
.equ ROM_BASE, 0xA0000000 /*Start address of Flash*/
#define FH81_INTC_BASE 0xE0200000
/*
*************************************************************************
*
* Jump vector table
*
*************************************************************************
*/
.section .init, "ax"
.code 32
.globl _start
_start:
b reset
ldr pc, _vector_undef
ldr pc, _vector_swi
ldr pc, _vector_pabt
ldr pc, _vector_dabt
ldr pc, _vector_resv
ldr pc, _vector_irq
ldr pc, _vector_fiq
_vector_undef: .word vector_undef
_vector_swi: .word vector_swi
_vector_pabt: .word vector_pabt
_vector_dabt: .word vector_dabt
_vector_resv: .word vector_resv
_vector_irq: .word vector_irq
_vector_fiq: .word vector_fiq
.balignl 16,0xdeadbeef
/*
*************************************************************************
*
* Startup Code (reset vector)
* relocate armboot to ram
* setup stack
* jump to second stage
*
*************************************************************************
*/
/*
* rtthread kernel start and end
* which are defined in linker script
*/
.globl _rtthread_start
_rtthread_start:
.word _start
.globl _rtthread_end
_rtthread_end:
.word _end
/*
* rtthread bss start and end which are defined in linker script
*/
.globl _bss_start
_bss_start:
.word __bss_start
.globl _bss_end
_bss_end:
.word __bss_end
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:
.word _irq_stack_start + 1024
.globl FIQ_STACK_START
FIQ_STACK_START:
.word _fiq_stack_start + 1024
.globl UNDEFINED_STACK_START
UNDEFINED_STACK_START:
.word _undefined_stack_start + CONFIG_STACKSIZE
.globl ABORT_STACK_START
ABORT_STACK_START:
.word _abort_stack_start + CONFIG_STACKSIZE
.globl _STACK_START
_STACK_START:
.word _svc_stack_start + 4096
/* ----------------------------------entry------------------------------*/
reset:
/* set the cpu to SVC32 mode */
mrs r0,cpsr
bic r0,r0,#MODEMASK
orr r0,r0,#SVCMODE
msr cpsr,r0
@vector 0x0
@enable icaches
@little endian
@disable dcaches, mmu
//ldr r0, =0x00400078
@ldr r0, =0x0000107a
// mcr p15, 0, r0, c1, c0, 0
//read
ldr r0, =0x0
mrc p15, 0, r0, c1, c0, 0
//change
ldr r0, =0x00400078
mcr p15, 0, r0, c1, c0, 0
//check
ldr r0, =0x0
mrc p15, 0, r0, c1, c0, 0
ldr r0, =0x00000000
mcr p15, 0, r0, c8, c7, 0 @ Flush TLB
mcr p15, 0, r0, c7, c7, 0 @ Flush Caches
mcr p15, 0, r0, c7, c10, 4 @ Flush Write Buffer
/* mask all IRQs by clearing all bits in the INTMRs set low and high to 0 */
ldr r1, =FH81_INTC_BASE
ldr r0, =0x0
str r0, [r1]
str r0, [r1, #4]
/* setup stack */
bl stack_setup
/* clear .bss */
mov r0,#0 /* get a zero */
ldr r1,=__bss_start /* bss start */
ldr r2,=__bss_end /* bss end */
bss_loop:
cmp r1,r2 /* check if data to clear */
strlo r0,[r1],#4 /* clear 4 bytes */
blo bss_loop /* loop until done */
/* call C++ constructors of global objects */
ldr r0, =__ctors_start__
ldr r1, =__ctors_end__
ctor_loop:
cmp r0, r1
beq ctor_end
ldr r2, [r0], #4
stmfd sp!, {r0-r1}
mov lr, pc
bx r2
ldmfd sp!, {r0-r1}
b ctor_loop
ctor_end:
/* enable_unaligned_access */
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x02 /*Clear the A bit, bit 1*/
and r0, r0, #(1 << 22) /*Set the U bit, bit 22*/
mcr p15, 0, r0, c1, c0, 0
#ifdef RT_USING_VFP
bl vfp_init
#endif
/* start RT-Thread Kernel */
ldr pc, _rtthread_startup
_rtthread_startup:
.word rtthread_startup
.global cpu_reset
cpu_reset:
#ldr r0, =0xfffffd00
#ldr r1, =(AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST)
#str r1, [r0]
#mov pc, lr
B cpu_reset
/*
*************************************************************************
*
* Interrupt handling
*
*************************************************************************
*/
.macro push_exp_reg
sub sp, sp, #S_FRAME_SIZE @/* Sizeof(struct rt_hw_stack) */
stmib sp, {r0 - r12} @/* Calling r0-r12 */
mov r0, sp
mrs r6, spsr @/* Save CPSR */
str lr, [r0, #S_PC] @/* Push PC */
str r6, [r0, #S_CPSR] @/* Push CPSR */
@ switch to SVC mode with no interrupt
msr cpsr_c, #I_BIT|F_BIT|SVCMODE
str sp, [r0, #S_SP] @/* Save calling SP */
str lr, [r0, #S_LR] @/* Save calling PC */
.endm
#ifdef RT_USING_VFP
__ret_to_undef:
ldmfd sp!, {r4} @ pop task's cpsr to spsr
msr spsr_cxsf, r4
ldmfd sp!, {r0-r12}
add sp, sp, #4
ldmfd sp!, {lr,pc}^
#endif
/* exception handlers */
.align 5
vector_undef:
push_exp_reg
#ifdef RT_USING_VFP
cps #UNDEFMODE
ldr r2, [r0, #S_PC] @ r2=faulted PC+4
adr r9, __ret_to_undef @ r9=exception success return
sub r1, r2, #4
ldr r0, [r1] @ r0=faulted instruction
bl undef_entry
mov r0, sp
#endif
bl rt_hw_trap_udef
.align 5
vector_swi:
push_exp_reg
bl rt_hw_trap_swi
.align 5
vector_pabt:
push_exp_reg
bl rt_hw_trap_pabt
.align 5
vector_dabt:
push_exp_reg
bl rt_hw_trap_dabt
.align 5
vector_resv:
push_exp_reg
bl rt_hw_trap_resv
.globl rt_interrupt_enter
.globl rt_interrupt_leave
.globl rt_thread_switch_interrupt_flag
.globl rt_interrupt_from_thread
.globl rt_interrupt_to_thread
vector_irq:
stmfd sp!, {r0-r12,lr}
@
#ifdef RT_USING_VFP
vmrs r0, fpexc
stmfd sp!, {r0} @ save VFP status -- irq_fpexc = fpexc
bic r0, r0, #FPEXC_EN @ always disable VFP so we can
@ lazily save/restore the old state.
vmsr fpexc, r0
#endif
bl rt_interrupt_enter
bl rt_hw_trap_irq
bl rt_interrupt_leave
#ifdef RT_USING_VFP
ldmfd sp!, {r1}
vmrs r0, fpexc
tst r0, #FPEXC_EN @ irq used VFP?
bicne r1, r0, #FPEXC_EN @ if irq used VFP, then clear fpexc.en bit
vmsr fpexc, r1 @ restore VFP status
@ if irq not used VFP, then fpexc = irq_fpexc
@ if irq used VFP, then disable VFP
#endif
@ if rt_thread_switch_interrupt_flag set, jump to
@ rt_hw_context_switch_interrupt_do and don't return
ldr r0, =rt_thread_switch_interrupt_flag
ldr r1, [r0]
cmp r1, #1
beq rt_hw_context_switch_interrupt_do
ldmfd sp!, {r0-r12,lr}
@mrs r8,spsr
@msr cpsr, r8
subs pc, lr, #4
.align 5
vector_fiq:
stmfd sp!,{r0-r7,lr}
bl rt_hw_trap_fiq
ldmfd sp!,{r0-r7,lr}
subs pc,lr,#4
rt_hw_context_switch_interrupt_do:
mov r1, #0 @ clear flag
str r1, [r0]
ldmfd sp!, {r0-r12,lr}@ reload saved registers
stmfd sp, {r0-r2} @ save r0-r2
mrs r0, spsr @ get cpsr of interrupt thread
sub r1, sp, #4*3
sub r2, lr, #4 @ save old task's pc to r2
@ switch to SVC mode with no interrupt
msr cpsr_c, #I_BIT|F_BIT|SVCMODE
stmfd sp!, {r2} @ push old task's pc
stmfd sp!, {r3-r12,lr}@ push old task's lr,r12-r4
ldmfd r1, {r1-r3} @ restore r0-r2 of the interrupt thread
stmfd sp!, {r1-r3} @ push old task's r0-r2
stmfd sp!, {r0} @ push old task's cpsr
ldr r4, =rt_interrupt_from_thread
ldr r5, [r4]
str sp, [r5] @ store sp in preempted tasks's TCB
ldr r6, =rt_interrupt_to_thread
ldr r6, [r6]
ldr sp, [r6] @ get new task's stack pointer
ldmfd sp!, {r4} @ pop new task's cpsr to spsr
msr spsr_cxsf, r4
#ifdef RT_USING_VFP
vmrs r0, fpexc
bic r0, r0, #FPEXC_EN @ always disable VFP so we can
@ lazily save/restore the old state.
vmsr fpexc, r0
#endif
ldmfd sp!, {r0-r12,lr,pc}^ @ pop new task's r0-r12,lr & pc, copy spsr to cpsr
stack_setup:
mrs r0, cpsr
bic r0, r0, #MODEMASK
orr r1, r0, #UNDEFMODE|NOINT
msr cpsr_cxsf, r1 /* undef mode */
ldr sp, UNDEFINED_STACK_START
orr r1,r0,#ABORTMODE|NOINT
msr cpsr_cxsf,r1 /* abort mode */
ldr sp, ABORT_STACK_START
orr r1,r0,#IRQMODE|NOINT
msr cpsr_cxsf,r1 /* IRQ mode */
ldr sp, IRQ_STACK_START
orr r1,r0,#FIQMODE|NOINT
msr cpsr_cxsf,r1 /* FIQ mode */
ldr sp, FIQ_STACK_START
bic r0,r0,#MODEMASK
orr r1,r0,#SVCMODE|NOINT
msr cpsr_cxsf,r1 /* SVC mode */
ldr sp, _STACK_START
/* USER mode is not initialized. */
bx lr /* The LR register may be not valid for the mode changes.*/
/*/*}*/