rtt-f030/bsp/efm32/EFM32GG_DK3750/dvk.h

227 lines
8.0 KiB
C

/**************************************************************************//**
* @file
* @brief EFM32GG_DK3750 board support package API
* @author Energy Micro AS
* @version 1.2.2
******************************************************************************
* @section License
* <b>(C) Copyright 2011 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#ifndef __DVK_H
#define __DVK_H
/***************************************************************************//**
* @addtogroup BSP
* @{
******************************************************************************/
#include <stdbool.h>
#include <stdint.h>
#include "efm32.h"
#include "dvk_bcregisters.h"
#ifdef __cplusplus
extern "C" {
#endif
/** DVK board control access method */
typedef enum
{
DVK_Init_EBI, /**< Use EBI to interface board control functionality */
DVK_Init_SPI, /**< Use SPI to interface board control functionality */
DVK_Init_DIRECT, /**< No board control, only GPIO */
DVK_Init_OFF, /**< Disabled */
} DVK_Init_TypeDef;
extern DVK_Init_TypeDef dvkOperationMode;
/** Bus control access */
typedef enum
{
DVK_BusControl_OFF, /**< Board control disable */
DVK_BusControl_DIRECT, /**< GPIO direct drive (n/a) */
DVK_BusControl_SPI, /**< Configure Board controller for SPI mode */
DVK_BusControl_EBI, /**< Configure Board controller for EBI mode */
} DVK_BusControl_TypeDef;
/** Display Control */
typedef enum
{
DVK_Display_EBI, /**< SSD2119 TFT controller driven by EFM32GG EBI interface */
DVK_Display_SPI, /**< SSD2119 TFT controller driven by EFM32GG SPI interface */
DVK_Display_BC, /**< SSD2119 TFT controller driven by board controller (AEM) */
DVK_Display_PowerEnable, /**< SSD2119 Enable power */
DVK_Display_PowerDisable, /**< SSD2119 Disable power */
DVK_Display_ResetAssert, /**< Hold SSD2119 in reset */
DVK_Display_ResetRelease, /**< Release SSD2119 in reset */
DVK_Display_Mode8080, /**< Configure SSD2119 for 8080 mode of operation */
DVK_Display_ModeGeneric, /**< Configure SSD2119 for Generic+SPI mode of operation */
} DVK_Display_TypeDef;
/** SPI control */
typedef enum
{
DVK_SPI_Audio, /**< Configure switchable SPI interface to Audio I2S */
DVK_SPI_Ethernet, /**< Configure switchable SPI interface to Ethernet */
DVK_SPI_Display, /**< Configure switchable SPI interface to SSD2119 */
} DVK_SpiControl_TypeDef;
/** Peripherals control structure */
typedef enum
{
DVK_RS232_SHUTDOWN, /**< Disable RS232 */
DVK_RS232_UART, /**< UART control of RS232 */
DVK_RS232_LEUART, /**< LEUART control of RS232 */
DVK_I2C, /**< I2C */
DVK_ETH, /**< Ethernet */
DVK_I2S, /**< Audio I2S */
DVK_TRACE, /**< ETM Trace */
DVK_TOUCH, /**< Display touch interface */
DVK_AUDIO_IN, /**< Audio In */
DVK_AUDIO_OUT, /**< Audio Out */
DVK_ANALOG_DIFF, /**< Analog DIFF */
DVK_ANALOG_SE, /**< Analog SE */
DVK_MICROSD, /**< MicroSD SPI interace */
DVK_TFT, /**< SSD2119 TFT controller */
} DVK_Peripheral_TypeDef;
/* Initalize DVK board for access to external PSRAM, Flash and BC registers */
void DVK_init(DVK_Init_TypeDef mode);
void DVK_disable(void);
/* Board controller control API */
void DVK_busControlMode(DVK_BusControl_TypeDef mode);
void DVK_peripheralAccess(DVK_Peripheral_TypeDef perf, bool enable);
void DVK_spiControl(DVK_SpiControl_TypeDef device);
/* Board controller access function */
uint16_t DVK_getPushButtons(void);
uint16_t DVK_getJoystick(void);
uint16_t DVK_getDipSwitch(void);
void DVK_setLEDs(uint16_t leds);
uint16_t DVK_getLEDs(void);
/* Miscellaneous */
void DVK_setEnergyMode(uint16_t energyMode);
void DVK_displayControl(DVK_Display_TypeDef option);
/* Board controller interrupt support */
void DVK_enableInterrupt(uint16_t flags);
void DVK_disableInterrupt(uint16_t flags);
uint16_t DVK_getInterruptFlags(void);
void DVK_clearInterruptFlags(uint16_t flags);
/* EBI access */
bool DVK_EBI_init(void);
void DVK_EBI_disable(void);
void DVK_EBI_extendedAddressRange(bool enable);
static __INLINE void DVK_EBI_writeRegister(volatile uint16_t *addr, uint16_t data);
static __INLINE uint16_t DVK_EBI_readRegister(volatile uint16_t *addr);
/* SPI access */
bool DVK_SPI_init(void);
void DVK_SPI_disable(void);
uint16_t DVK_SPI_readRegister(volatile uint16_t *addr);
void DVK_SPI_writeRegister(volatile uint16_t *addr, uint16_t data);
/* MCU-plug-in-board (BRD3600) API */
void DVK_BRD3600A_init(void);
void DVK_BRD3600A_deInit(void);
void DVK_BRD3600A_usbStatusLEDEnable(int enable);
void DVK_BRD3600A_usbVBUSSwitchEnable(int enable);
int DVK_BRD3600A_usbVBUSGetOCFlagState(void);
/* For "backward compatibility" with DVK */
/** DVK_enablePeripheral() backward compatibility */
#define DVK_enablePeripheral(X) DVK_peripheralAccess(X, true)
/** DVK_disablePeripheral() backward compatibility */
#define DVK_disablePeripheral(X) DVK_peripheralAccess(X, false)
/**************************************************************************//**
* @brief Write data into 16-bit board control register using mem.mapped EBI
* @param addr Address of board controller register
* @param data Data to write into register
*****************************************************************************/
static __INLINE void DVK_EBI_writeRegister(volatile uint16_t *addr, uint16_t data)
{
*addr = data;
}
/**************************************************************************//**
* @brief Read data from 16-bit board control register using memory mapped EBI
* @param addr Register to read from
* @return Value of board controller register
*****************************************************************************/
static __INLINE uint16_t DVK_EBI_readRegister(volatile uint16_t *addr)
{
return *addr;
}
/**************************************************************************//**
* @brief Read data from 16-bit board control register
* @param addr Register to read
* @return Value of board controller register
*****************************************************************************/
static __INLINE uint16_t DVK_readRegister(volatile uint16_t *addr)
{
if (dvkOperationMode == DVK_Init_EBI)
{
return DVK_EBI_readRegister(addr);
}
else
{
return DVK_SPI_readRegister(addr);
}
}
/**************************************************************************//**
* @brief Write data into 16-bit board control register
* @param addr Address to board control register
* @param data Data to write into register
*****************************************************************************/
static __INLINE void DVK_writeRegister(volatile uint16_t *addr, uint16_t data)
{
if (dvkOperationMode == DVK_Init_EBI)
{
DVK_EBI_writeRegister(addr, data);
}
else
{
DVK_SPI_writeRegister(addr, data);
}
}
#ifdef __cplusplus
}
#endif
/** @} (end group BSP) */
#endif