778 lines
31 KiB
C
778 lines
31 KiB
C
/*
|
|
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#ifndef _FSL_UART_H_
|
|
#define _FSL_UART_H_
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup uart_driver
|
|
* @{
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief UART driver version 2.1.4. */
|
|
#define FSL_UART_DRIVER_VERSION (MAKE_VERSION(2, 1, 4))
|
|
/*@}*/
|
|
|
|
/*! @brief Error codes for the UART driver. */
|
|
enum _uart_status
|
|
{
|
|
kStatus_UART_TxBusy = MAKE_STATUS(kStatusGroup_UART, 0), /*!< Transmitter is busy. */
|
|
kStatus_UART_RxBusy = MAKE_STATUS(kStatusGroup_UART, 1), /*!< Receiver is busy. */
|
|
kStatus_UART_TxIdle = MAKE_STATUS(kStatusGroup_UART, 2), /*!< UART transmitter is idle. */
|
|
kStatus_UART_RxIdle = MAKE_STATUS(kStatusGroup_UART, 3), /*!< UART receiver is idle. */
|
|
kStatus_UART_TxWatermarkTooLarge = MAKE_STATUS(kStatusGroup_UART, 4), /*!< TX FIFO watermark too large */
|
|
kStatus_UART_RxWatermarkTooLarge = MAKE_STATUS(kStatusGroup_UART, 5), /*!< RX FIFO watermark too large */
|
|
kStatus_UART_FlagCannotClearManually =
|
|
MAKE_STATUS(kStatusGroup_UART, 6), /*!< UART flag can't be manually cleared. */
|
|
kStatus_UART_Error = MAKE_STATUS(kStatusGroup_UART, 7), /*!< Error happens on UART. */
|
|
kStatus_UART_RxRingBufferOverrun = MAKE_STATUS(kStatusGroup_UART, 8), /*!< UART RX software ring buffer overrun. */
|
|
kStatus_UART_RxHardwareOverrun = MAKE_STATUS(kStatusGroup_UART, 9), /*!< UART RX receiver overrun. */
|
|
kStatus_UART_NoiseError = MAKE_STATUS(kStatusGroup_UART, 10), /*!< UART noise error. */
|
|
kStatus_UART_FramingError = MAKE_STATUS(kStatusGroup_UART, 11), /*!< UART framing error. */
|
|
kStatus_UART_ParityError = MAKE_STATUS(kStatusGroup_UART, 12), /*!< UART parity error. */
|
|
kStatus_UART_BaudrateNotSupport =
|
|
MAKE_STATUS(kStatusGroup_UART, 13), /*!< Baudrate is not support in current clock source */
|
|
};
|
|
|
|
/*! @brief UART parity mode. */
|
|
typedef enum _uart_parity_mode
|
|
{
|
|
kUART_ParityDisabled = 0x0U, /*!< Parity disabled */
|
|
kUART_ParityEven = 0x2U, /*!< Parity enabled, type even, bit setting: PE|PT = 10 */
|
|
kUART_ParityOdd = 0x3U, /*!< Parity enabled, type odd, bit setting: PE|PT = 11 */
|
|
} uart_parity_mode_t;
|
|
|
|
/*! @brief UART stop bit count. */
|
|
typedef enum _uart_stop_bit_count
|
|
{
|
|
kUART_OneStopBit = 0U, /*!< One stop bit */
|
|
kUART_TwoStopBit = 1U, /*!< Two stop bits */
|
|
} uart_stop_bit_count_t;
|
|
|
|
/*!
|
|
* @brief UART interrupt configuration structure, default settings all disabled.
|
|
*
|
|
* This structure contains the settings for all of the UART interrupt configurations.
|
|
*/
|
|
enum _uart_interrupt_enable
|
|
{
|
|
#if defined(FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT
|
|
kUART_LinBreakInterruptEnable = (UART_BDH_LBKDIE_MASK), /*!< LIN break detect interrupt. */
|
|
#endif
|
|
kUART_RxActiveEdgeInterruptEnable = (UART_BDH_RXEDGIE_MASK), /*!< RX active edge interrupt. */
|
|
kUART_TxDataRegEmptyInterruptEnable = (UART_C2_TIE_MASK << 8), /*!< Transmit data register empty interrupt. */
|
|
kUART_TransmissionCompleteInterruptEnable = (UART_C2_TCIE_MASK << 8), /*!< Transmission complete interrupt. */
|
|
kUART_RxDataRegFullInterruptEnable = (UART_C2_RIE_MASK << 8), /*!< Receiver data register full interrupt. */
|
|
kUART_IdleLineInterruptEnable = (UART_C2_ILIE_MASK << 8), /*!< Idle line interrupt. */
|
|
kUART_RxOverrunInterruptEnable = (UART_C3_ORIE_MASK << 16), /*!< Receiver overrun interrupt. */
|
|
kUART_NoiseErrorInterruptEnable = (UART_C3_NEIE_MASK << 16), /*!< Noise error flag interrupt. */
|
|
kUART_FramingErrorInterruptEnable = (UART_C3_FEIE_MASK << 16), /*!< Framing error flag interrupt. */
|
|
kUART_ParityErrorInterruptEnable = (UART_C3_PEIE_MASK << 16), /*!< Parity error flag interrupt. */
|
|
#if defined(FSL_FEATURE_UART_HAS_FIFO) && FSL_FEATURE_UART_HAS_FIFO
|
|
kUART_RxFifoOverflowInterruptEnable = (UART_CFIFO_RXOFE_MASK << 24), /*!< RX FIFO overflow interrupt. */
|
|
kUART_TxFifoOverflowInterruptEnable = (UART_CFIFO_TXOFE_MASK << 24), /*!< TX FIFO overflow interrupt. */
|
|
kUART_RxFifoUnderflowInterruptEnable = (UART_CFIFO_RXUFE_MASK << 24), /*!< RX FIFO underflow interrupt. */
|
|
#endif
|
|
kUART_AllInterruptsEnable =
|
|
#if defined(FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT
|
|
kUART_LinBreakInterruptEnable |
|
|
#endif
|
|
kUART_RxActiveEdgeInterruptEnable | kUART_TxDataRegEmptyInterruptEnable |
|
|
kUART_TransmissionCompleteInterruptEnable | kUART_RxDataRegFullInterruptEnable | kUART_IdleLineInterruptEnable |
|
|
kUART_RxOverrunInterruptEnable | kUART_NoiseErrorInterruptEnable | kUART_FramingErrorInterruptEnable |
|
|
kUART_ParityErrorInterruptEnable
|
|
#if defined(FSL_FEATURE_UART_HAS_FIFO) && FSL_FEATURE_UART_HAS_FIFO
|
|
|
|
|
kUART_RxFifoOverflowInterruptEnable | kUART_TxFifoOverflowInterruptEnable | kUART_RxFifoUnderflowInterruptEnable
|
|
#endif
|
|
,
|
|
};
|
|
|
|
/*!
|
|
* @brief UART status flags.
|
|
*
|
|
* This provides constants for the UART status flags for use in the UART functions.
|
|
*/
|
|
enum _uart_flags
|
|
{
|
|
kUART_TxDataRegEmptyFlag = (UART_S1_TDRE_MASK), /*!< TX data register empty flag. */
|
|
kUART_TransmissionCompleteFlag = (UART_S1_TC_MASK), /*!< Transmission complete flag. */
|
|
kUART_RxDataRegFullFlag = (UART_S1_RDRF_MASK), /*!< RX data register full flag. */
|
|
kUART_IdleLineFlag = (UART_S1_IDLE_MASK), /*!< Idle line detect flag. */
|
|
kUART_RxOverrunFlag = (UART_S1_OR_MASK), /*!< RX overrun flag. */
|
|
kUART_NoiseErrorFlag = (UART_S1_NF_MASK), /*!< RX takes 3 samples of each received bit.
|
|
If any of these samples differ, noise flag sets */
|
|
kUART_FramingErrorFlag = (UART_S1_FE_MASK), /*!< Frame error flag, sets if logic 0 was detected
|
|
where stop bit expected */
|
|
kUART_ParityErrorFlag = (UART_S1_PF_MASK), /*!< If parity enabled, sets upon parity error detection */
|
|
#if defined(FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT
|
|
kUART_LinBreakFlag =
|
|
(UART_S2_LBKDIF_MASK
|
|
<< 8), /*!< LIN break detect interrupt flag, sets when
|
|
LIN break char detected and LIN circuit enabled */
|
|
#endif
|
|
kUART_RxActiveEdgeFlag =
|
|
(UART_S2_RXEDGIF_MASK << 8), /*!< RX pin active edge interrupt flag,
|
|
sets when active edge detected */
|
|
kUART_RxActiveFlag =
|
|
(UART_S2_RAF_MASK << 8), /*!< Receiver Active Flag (RAF),
|
|
sets at beginning of valid start bit */
|
|
#if defined(FSL_FEATURE_UART_HAS_EXTENDED_DATA_REGISTER_FLAGS) && FSL_FEATURE_UART_HAS_EXTENDED_DATA_REGISTER_FLAGS
|
|
kUART_NoiseErrorInRxDataRegFlag = (UART_ED_NOISY_MASK << 16), /*!< Noisy bit, sets if noise detected. */
|
|
kUART_ParityErrorInRxDataRegFlag = (UART_ED_PARITYE_MASK << 16), /*!< Paritye bit, sets if parity error detected. */
|
|
#endif
|
|
#if defined(FSL_FEATURE_UART_HAS_FIFO) && FSL_FEATURE_UART_HAS_FIFO
|
|
kUART_TxFifoEmptyFlag = (UART_SFIFO_TXEMPT_MASK << 24), /*!< TXEMPT bit, sets if TX buffer is empty */
|
|
kUART_RxFifoEmptyFlag = (UART_SFIFO_RXEMPT_MASK << 24), /*!< RXEMPT bit, sets if RX buffer is empty */
|
|
kUART_TxFifoOverflowFlag = (UART_SFIFO_TXOF_MASK << 24), /*!< TXOF bit, sets if TX buffer overflow occurred */
|
|
kUART_RxFifoOverflowFlag = (UART_SFIFO_RXOF_MASK << 24), /*!< RXOF bit, sets if receive buffer overflow */
|
|
kUART_RxFifoUnderflowFlag = (UART_SFIFO_RXUF_MASK << 24), /*!< RXUF bit, sets if receive buffer underflow */
|
|
#endif
|
|
};
|
|
|
|
/*! @brief UART configuration structure. */
|
|
typedef struct _uart_config
|
|
{
|
|
uint32_t baudRate_Bps; /*!< UART baud rate */
|
|
uart_parity_mode_t parityMode; /*!< Parity mode, disabled (default), even, odd */
|
|
#if defined(FSL_FEATURE_UART_HAS_STOP_BIT_CONFIG_SUPPORT) && FSL_FEATURE_UART_HAS_STOP_BIT_CONFIG_SUPPORT
|
|
uart_stop_bit_count_t stopBitCount; /*!< Number of stop bits, 1 stop bit (default) or 2 stop bits */
|
|
#endif
|
|
#if defined(FSL_FEATURE_UART_HAS_FIFO) && FSL_FEATURE_UART_HAS_FIFO
|
|
uint8_t txFifoWatermark; /*!< TX FIFO watermark */
|
|
uint8_t rxFifoWatermark; /*!< RX FIFO watermark */
|
|
#endif
|
|
bool enableTx; /*!< Enable TX */
|
|
bool enableRx; /*!< Enable RX */
|
|
} uart_config_t;
|
|
|
|
/*! @brief UART transfer structure. */
|
|
typedef struct _uart_transfer
|
|
{
|
|
uint8_t *data; /*!< The buffer of data to be transfer.*/
|
|
size_t dataSize; /*!< The byte count to be transfer. */
|
|
} uart_transfer_t;
|
|
|
|
/* Forward declaration of the handle typedef. */
|
|
typedef struct _uart_handle uart_handle_t;
|
|
|
|
/*! @brief UART transfer callback function. */
|
|
typedef void (*uart_transfer_callback_t)(UART_Type *base, uart_handle_t *handle, status_t status, void *userData);
|
|
|
|
/*! @brief UART handle structure. */
|
|
struct _uart_handle
|
|
{
|
|
uint8_t *volatile txData; /*!< Address of remaining data to send. */
|
|
volatile size_t txDataSize; /*!< Size of the remaining data to send. */
|
|
size_t txDataSizeAll; /*!< Size of the data to send out. */
|
|
uint8_t *volatile rxData; /*!< Address of remaining data to receive. */
|
|
volatile size_t rxDataSize; /*!< Size of the remaining data to receive. */
|
|
size_t rxDataSizeAll; /*!< Size of the data to receive. */
|
|
|
|
uint8_t *rxRingBuffer; /*!< Start address of the receiver ring buffer. */
|
|
size_t rxRingBufferSize; /*!< Size of the ring buffer. */
|
|
volatile uint16_t rxRingBufferHead; /*!< Index for the driver to store received data into ring buffer. */
|
|
volatile uint16_t rxRingBufferTail; /*!< Index for the user to get data from the ring buffer. */
|
|
|
|
uart_transfer_callback_t callback; /*!< Callback function. */
|
|
void *userData; /*!< UART callback function parameter.*/
|
|
|
|
volatile uint8_t txState; /*!< TX transfer state. */
|
|
volatile uint8_t rxState; /*!< RX transfer state */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif /* _cplusplus */
|
|
|
|
/*!
|
|
* @name Initialization and deinitialization
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initializes a UART instance with a user configuration structure and peripheral clock.
|
|
*
|
|
* This function configures the UART module with the user-defined settings. The user can configure the configuration
|
|
* structure and also get the default configuration by using the UART_GetDefaultConfig() function.
|
|
* The example below shows how to use this API to configure UART.
|
|
* @code
|
|
* uart_config_t uartConfig;
|
|
* uartConfig.baudRate_Bps = 115200U;
|
|
* uartConfig.parityMode = kUART_ParityDisabled;
|
|
* uartConfig.stopBitCount = kUART_OneStopBit;
|
|
* uartConfig.txFifoWatermark = 0;
|
|
* uartConfig.rxFifoWatermark = 1;
|
|
* UART_Init(UART1, &uartConfig, 20000000U);
|
|
* @endcode
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param config Pointer to the user-defined configuration structure.
|
|
* @param srcClock_Hz UART clock source frequency in HZ.
|
|
* @retval kStatus_UART_BaudrateNotSupport Baudrate is not support in current clock source.
|
|
* @retval kStatus_Success Status UART initialize succeed
|
|
*/
|
|
status_t UART_Init(UART_Type *base, const uart_config_t *config, uint32_t srcClock_Hz);
|
|
|
|
/*!
|
|
* @brief Deinitializes a UART instance.
|
|
*
|
|
* This function waits for TX complete, disables TX and RX, and disables the UART clock.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
*/
|
|
void UART_Deinit(UART_Type *base);
|
|
|
|
/*!
|
|
* @brief Gets the default configuration structure.
|
|
*
|
|
* This function initializes the UART configuration structure to a default value. The default
|
|
* values are as follows.
|
|
* uartConfig->baudRate_Bps = 115200U;
|
|
* uartConfig->bitCountPerChar = kUART_8BitsPerChar;
|
|
* uartConfig->parityMode = kUART_ParityDisabled;
|
|
* uartConfig->stopBitCount = kUART_OneStopBit;
|
|
* uartConfig->txFifoWatermark = 0;
|
|
* uartConfig->rxFifoWatermark = 1;
|
|
* uartConfig->enableTx = false;
|
|
* uartConfig->enableRx = false;
|
|
*
|
|
* @param config Pointer to configuration structure.
|
|
*/
|
|
void UART_GetDefaultConfig(uart_config_t *config);
|
|
|
|
/*!
|
|
* @brief Sets the UART instance baud rate.
|
|
*
|
|
* This function configures the UART module baud rate. This function is used to update
|
|
* the UART module baud rate after the UART module is initialized by the UART_Init.
|
|
* @code
|
|
* UART_SetBaudRate(UART1, 115200U, 20000000U);
|
|
* @endcode
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param baudRate_Bps UART baudrate to be set.
|
|
* @param srcClock_Hz UART clock source freqency in Hz.
|
|
* @retval kStatus_UART_BaudrateNotSupport Baudrate is not support in the current clock source.
|
|
* @retval kStatus_Success Set baudrate succeeded.
|
|
*/
|
|
status_t UART_SetBaudRate(UART_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Status
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets UART status flags.
|
|
*
|
|
* This function gets all UART status flags. The flags are returned as the logical
|
|
* OR value of the enumerators @ref _uart_flags. To check a specific status,
|
|
* compare the return value with enumerators in @ref _uart_flags.
|
|
* For example, to check whether the TX is empty, do the following.
|
|
* @code
|
|
* if (kUART_TxDataRegEmptyFlag & UART_GetStatusFlags(UART1))
|
|
* {
|
|
* ...
|
|
* }
|
|
* @endcode
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @return UART status flags which are ORed by the enumerators in the _uart_flags.
|
|
*/
|
|
uint32_t UART_GetStatusFlags(UART_Type *base);
|
|
|
|
/*!
|
|
* @brief Clears status flags with the provided mask.
|
|
*
|
|
* This function clears UART status flags with a provided mask. An automatically cleared flag
|
|
* can't be cleared by this function.
|
|
* These flags can only be cleared or set by hardware.
|
|
* kUART_TxDataRegEmptyFlag, kUART_TransmissionCompleteFlag, kUART_RxDataRegFullFlag,
|
|
* kUART_RxActiveFlag, kUART_NoiseErrorInRxDataRegFlag, kUART_ParityErrorInRxDataRegFlag,
|
|
* kUART_TxFifoEmptyFlag,kUART_RxFifoEmptyFlag
|
|
* Note that this API should be called when the Tx/Rx is idle. Otherwise it has no effect.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param mask The status flags to be cleared; it is logical OR value of @ref _uart_flags.
|
|
* @retval kStatus_UART_FlagCannotClearManually The flag can't be cleared by this function but
|
|
* it is cleared automatically by hardware.
|
|
* @retval kStatus_Success Status in the mask is cleared.
|
|
*/
|
|
status_t UART_ClearStatusFlags(UART_Type *base, uint32_t mask);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Interrupts
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables UART interrupts according to the provided mask.
|
|
*
|
|
* This function enables the UART interrupts according to the provided mask. The mask
|
|
* is a logical OR of enumeration members. See @ref _uart_interrupt_enable.
|
|
* For example, to enable TX empty interrupt and RX full interrupt, do the following.
|
|
* @code
|
|
* UART_EnableInterrupts(UART1,kUART_TxDataRegEmptyInterruptEnable | kUART_RxDataRegFullInterruptEnable);
|
|
* @endcode
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param mask The interrupts to enable. Logical OR of @ref _uart_interrupt_enable.
|
|
*/
|
|
void UART_EnableInterrupts(UART_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Disables the UART interrupts according to the provided mask.
|
|
*
|
|
* This function disables the UART interrupts according to the provided mask. The mask
|
|
* is a logical OR of enumeration members. See @ref _uart_interrupt_enable.
|
|
* For example, to disable TX empty interrupt and RX full interrupt do the following.
|
|
* @code
|
|
* UART_DisableInterrupts(UART1,kUART_TxDataRegEmptyInterruptEnable | kUART_RxDataRegFullInterruptEnable);
|
|
* @endcode
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param mask The interrupts to disable. Logical OR of @ref _uart_interrupt_enable.
|
|
*/
|
|
void UART_DisableInterrupts(UART_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Gets the enabled UART interrupts.
|
|
*
|
|
* This function gets the enabled UART interrupts. The enabled interrupts are returned
|
|
* as the logical OR value of the enumerators @ref _uart_interrupt_enable. To check
|
|
* a specific interrupts enable status, compare the return value with enumerators
|
|
* in @ref _uart_interrupt_enable.
|
|
* For example, to check whether TX empty interrupt is enabled, do the following.
|
|
* @code
|
|
* uint32_t enabledInterrupts = UART_GetEnabledInterrupts(UART1);
|
|
*
|
|
* if (kUART_TxDataRegEmptyInterruptEnable & enabledInterrupts)
|
|
* {
|
|
* ...
|
|
* }
|
|
* @endcode
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @return UART interrupt flags which are logical OR of the enumerators in @ref _uart_interrupt_enable.
|
|
*/
|
|
uint32_t UART_GetEnabledInterrupts(UART_Type *base);
|
|
|
|
/* @} */
|
|
|
|
#if defined(FSL_FEATURE_UART_HAS_DMA_SELECT) && FSL_FEATURE_UART_HAS_DMA_SELECT
|
|
/*!
|
|
* @name DMA Control
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets the UART data register address.
|
|
*
|
|
* This function returns the UART data register address, which is mainly used by DMA/eDMA.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @return UART data register addresses which are used both by the transmitter and the receiver.
|
|
*/
|
|
static inline uint32_t UART_GetDataRegisterAddress(UART_Type *base)
|
|
{
|
|
return (uint32_t) & (base->D);
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables or disables the UART transmitter DMA request.
|
|
*
|
|
* This function enables or disables the transmit data register empty flag, S1[TDRE], to generate the DMA requests.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void UART_EnableTxDMA(UART_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
#if (defined(FSL_FEATURE_UART_IS_SCI) && FSL_FEATURE_UART_IS_SCI)
|
|
base->C4 |= UART_C4_TDMAS_MASK;
|
|
#else
|
|
base->C5 |= UART_C5_TDMAS_MASK;
|
|
#endif
|
|
base->C2 |= UART_C2_TIE_MASK;
|
|
}
|
|
else
|
|
{
|
|
#if (defined(FSL_FEATURE_UART_IS_SCI) && FSL_FEATURE_UART_IS_SCI)
|
|
base->C4 &= ~UART_C4_TDMAS_MASK;
|
|
#else
|
|
base->C5 &= ~UART_C5_TDMAS_MASK;
|
|
#endif
|
|
base->C2 &= ~UART_C2_TIE_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables or disables the UART receiver DMA.
|
|
*
|
|
* This function enables or disables the receiver data register full flag, S1[RDRF], to generate DMA requests.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void UART_EnableRxDMA(UART_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
#if (defined(FSL_FEATURE_UART_IS_SCI) && FSL_FEATURE_UART_IS_SCI)
|
|
base->C4 |= UART_C4_RDMAS_MASK;
|
|
#else
|
|
base->C5 |= UART_C5_RDMAS_MASK;
|
|
#endif
|
|
base->C2 |= UART_C2_RIE_MASK;
|
|
}
|
|
else
|
|
{
|
|
#if (defined(FSL_FEATURE_UART_IS_SCI) && FSL_FEATURE_UART_IS_SCI)
|
|
base->C4 &= ~UART_C4_RDMAS_MASK;
|
|
#else
|
|
base->C5 &= ~UART_C5_RDMAS_MASK;
|
|
#endif
|
|
base->C2 &= ~UART_C2_RIE_MASK;
|
|
}
|
|
}
|
|
|
|
/* @} */
|
|
#endif /* FSL_FEATURE_UART_HAS_DMA_SELECT */
|
|
|
|
/*!
|
|
* @name Bus Operations
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables or disables the UART transmitter.
|
|
*
|
|
* This function enables or disables the UART transmitter.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void UART_EnableTx(UART_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->C2 |= UART_C2_TE_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->C2 &= ~UART_C2_TE_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables or disables the UART receiver.
|
|
*
|
|
* This function enables or disables the UART receiver.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void UART_EnableRx(UART_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->C2 |= UART_C2_RE_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->C2 &= ~UART_C2_RE_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Writes to the TX register.
|
|
*
|
|
* This function writes data to the TX register directly. The upper layer must ensure
|
|
* that the TX register is empty or TX FIFO has empty room before calling this function.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param data The byte to write.
|
|
*/
|
|
static inline void UART_WriteByte(UART_Type *base, uint8_t data)
|
|
{
|
|
base->D = data;
|
|
}
|
|
|
|
/*!
|
|
* @brief Reads the RX register directly.
|
|
*
|
|
* This function reads data from the RX register directly. The upper layer must
|
|
* ensure that the RX register is full or that the TX FIFO has data before calling this function.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @return The byte read from UART data register.
|
|
*/
|
|
static inline uint8_t UART_ReadByte(UART_Type *base)
|
|
{
|
|
return base->D;
|
|
}
|
|
|
|
/*!
|
|
* @brief Writes to the TX register using a blocking method.
|
|
*
|
|
* This function polls the TX register, waits for the TX register to be empty or for the TX FIFO
|
|
* to have room and writes data to the TX buffer.
|
|
*
|
|
* @note This function does not check whether all data is sent out to the bus.
|
|
* Before disabling the TX, check kUART_TransmissionCompleteFlag to ensure that the TX is
|
|
* finished.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param data Start address of the data to write.
|
|
* @param length Size of the data to write.
|
|
*/
|
|
void UART_WriteBlocking(UART_Type *base, const uint8_t *data, size_t length);
|
|
|
|
/*!
|
|
* @brief Read RX data register using a blocking method.
|
|
*
|
|
* This function polls the RX register, waits for the RX register to be full or for RX FIFO to
|
|
* have data, and reads data from the TX register.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param data Start address of the buffer to store the received data.
|
|
* @param length Size of the buffer.
|
|
* @retval kStatus_UART_RxHardwareOverrun Receiver overrun occurred while receiving data.
|
|
* @retval kStatus_UART_NoiseError A noise error occurred while receiving data.
|
|
* @retval kStatus_UART_FramingError A framing error occurred while receiving data.
|
|
* @retval kStatus_UART_ParityError A parity error occurred while receiving data.
|
|
* @retval kStatus_Success Successfully received all data.
|
|
*/
|
|
status_t UART_ReadBlocking(UART_Type *base, uint8_t *data, size_t length);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Transactional
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initializes the UART handle.
|
|
*
|
|
* This function initializes the UART handle which can be used for other UART
|
|
* transactional APIs. Usually, for a specified UART instance,
|
|
* call this API once to get the initialized handle.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
* @param callback The callback function.
|
|
* @param userData The parameter of the callback function.
|
|
*/
|
|
void UART_TransferCreateHandle(UART_Type *base,
|
|
uart_handle_t *handle,
|
|
uart_transfer_callback_t callback,
|
|
void *userData);
|
|
|
|
/*!
|
|
* @brief Sets up the RX ring buffer.
|
|
*
|
|
* This function sets up the RX ring buffer to a specific UART handle.
|
|
*
|
|
* When the RX ring buffer is used, data received are stored into the ring buffer even when the
|
|
* user doesn't call the UART_TransferReceiveNonBlocking() API. If data is already received
|
|
* in the ring buffer, the user can get the received data from the ring buffer directly.
|
|
*
|
|
* @note When using the RX ring buffer, one byte is reserved for internal use. In other
|
|
* words, if @p ringBufferSize is 32, only 31 bytes are used for saving data.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
* @param ringBuffer Start address of the ring buffer for background receiving. Pass NULL to disable the ring buffer.
|
|
* @param ringBufferSize Size of the ring buffer.
|
|
*/
|
|
void UART_TransferStartRingBuffer(UART_Type *base, uart_handle_t *handle, uint8_t *ringBuffer, size_t ringBufferSize);
|
|
|
|
/*!
|
|
* @brief Aborts the background transfer and uninstalls the ring buffer.
|
|
*
|
|
* This function aborts the background transfer and uninstalls the ring buffer.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
*/
|
|
void UART_TransferStopRingBuffer(UART_Type *base, uart_handle_t *handle);
|
|
|
|
/*!
|
|
* @brief Transmits a buffer of data using the interrupt method.
|
|
*
|
|
* This function sends data using an interrupt method. This is a non-blocking function, which
|
|
* returns directly without waiting for all data to be written to the TX register. When
|
|
* all data is written to the TX register in the ISR, the UART driver calls the callback
|
|
* function and passes the @ref kStatus_UART_TxIdle as status parameter.
|
|
*
|
|
* @note The kStatus_UART_TxIdle is passed to the upper layer when all data is written
|
|
* to the TX register. However, it does not ensure that all data is sent out. Before disabling the TX,
|
|
* check the kUART_TransmissionCompleteFlag to ensure that the TX is finished.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
* @param xfer UART transfer structure. See #uart_transfer_t.
|
|
* @retval kStatus_Success Successfully start the data transmission.
|
|
* @retval kStatus_UART_TxBusy Previous transmission still not finished; data not all written to TX register yet.
|
|
* @retval kStatus_InvalidArgument Invalid argument.
|
|
*/
|
|
status_t UART_TransferSendNonBlocking(UART_Type *base, uart_handle_t *handle, uart_transfer_t *xfer);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt-driven data transmit.
|
|
*
|
|
* This function aborts the interrupt-driven data sending. The user can get the remainBytes to find out
|
|
* how many bytes are not sent out.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
*/
|
|
void UART_TransferAbortSend(UART_Type *base, uart_handle_t *handle);
|
|
|
|
/*!
|
|
* @brief Gets the number of bytes written to the UART TX register.
|
|
*
|
|
* This function gets the number of bytes written to the UART TX
|
|
* register by using the interrupt method.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
* @param count Send bytes count.
|
|
* @retval kStatus_NoTransferInProgress No send in progress.
|
|
* @retval kStatus_InvalidArgument The parameter is invalid.
|
|
* @retval kStatus_Success Get successfully through the parameter \p count;
|
|
*/
|
|
status_t UART_TransferGetSendCount(UART_Type *base, uart_handle_t *handle, uint32_t *count);
|
|
|
|
/*!
|
|
* @brief Receives a buffer of data using an interrupt method.
|
|
*
|
|
* This function receives data using an interrupt method. This is a non-blocking function, which
|
|
* returns without waiting for all data to be received.
|
|
* If the RX ring buffer is used and not empty, the data in the ring buffer is copied and
|
|
* the parameter @p receivedBytes shows how many bytes are copied from the ring buffer.
|
|
* After copying, if the data in the ring buffer is not enough to read, the receive
|
|
* request is saved by the UART driver. When the new data arrives, the receive request
|
|
* is serviced first. When all data is received, the UART driver notifies the upper layer
|
|
* through a callback function and passes the status parameter @ref kStatus_UART_RxIdle.
|
|
* For example, the upper layer needs 10 bytes but there are only 5 bytes in the ring buffer.
|
|
* The 5 bytes are copied to the xfer->data and this function returns with the
|
|
* parameter @p receivedBytes set to 5. For the left 5 bytes, newly arrived data is
|
|
* saved from the xfer->data[5]. When 5 bytes are received, the UART driver notifies the upper layer.
|
|
* If the RX ring buffer is not enabled, this function enables the RX and RX interrupt
|
|
* to receive data to the xfer->data. When all data is received, the upper layer is notified.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
* @param xfer UART transfer structure, see #uart_transfer_t.
|
|
* @param receivedBytes Bytes received from the ring buffer directly.
|
|
* @retval kStatus_Success Successfully queue the transfer into transmit queue.
|
|
* @retval kStatus_UART_RxBusy Previous receive request is not finished.
|
|
* @retval kStatus_InvalidArgument Invalid argument.
|
|
*/
|
|
status_t UART_TransferReceiveNonBlocking(UART_Type *base,
|
|
uart_handle_t *handle,
|
|
uart_transfer_t *xfer,
|
|
size_t *receivedBytes);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt-driven data receiving.
|
|
*
|
|
* This function aborts the interrupt-driven data receiving. The user can get the remainBytes to know
|
|
* how many bytes are not received yet.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
*/
|
|
void UART_TransferAbortReceive(UART_Type *base, uart_handle_t *handle);
|
|
|
|
/*!
|
|
* @brief Gets the number of bytes that have been received.
|
|
*
|
|
* This function gets the number of bytes that have been received.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
* @param count Receive bytes count.
|
|
* @retval kStatus_NoTransferInProgress No receive in progress.
|
|
* @retval kStatus_InvalidArgument Parameter is invalid.
|
|
* @retval kStatus_Success Get successfully through the parameter \p count;
|
|
*/
|
|
status_t UART_TransferGetReceiveCount(UART_Type *base, uart_handle_t *handle, uint32_t *count);
|
|
|
|
/*!
|
|
* @brief UART IRQ handle function.
|
|
*
|
|
* This function handles the UART transmit and receive IRQ request.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
*/
|
|
void UART_TransferHandleIRQ(UART_Type *base, uart_handle_t *handle);
|
|
|
|
/*!
|
|
* @brief UART Error IRQ handle function.
|
|
*
|
|
* This function handles the UART error IRQ request.
|
|
*
|
|
* @param base UART peripheral base address.
|
|
* @param handle UART handle pointer.
|
|
*/
|
|
void UART_TransferHandleErrorIRQ(UART_Type *base, uart_handle_t *handle);
|
|
|
|
/* @} */
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
/*! @}*/
|
|
|
|
#endif /* _FSL_UART_H_ */
|