372 lines
16 KiB
ArmAsm
372 lines
16 KiB
ArmAsm
/* K64F startup ARM GCC
|
|
* Purpose: startup file for Cortex-M4 devices. Should use with
|
|
* GCC for ARM Embedded Processors
|
|
* Version: V1.2
|
|
* Date: 15 Nov 2011
|
|
*
|
|
* Copyright (c) 2011, ARM Limited
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
* Neither the name of the ARM Limited nor the
|
|
names of its contributors may be used to endorse or promote products
|
|
derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
.syntax unified
|
|
.arch armv7-m
|
|
|
|
/* Memory Model
|
|
The HEAP starts at the end of the DATA section and grows upward.
|
|
|
|
The STACK starts at the end of the RAM and grows downward.
|
|
|
|
The HEAP and stack STACK are only checked at compile time:
|
|
(DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
|
|
|
|
This is just a check for the bare minimum for the Heap+Stack area before
|
|
aborting compilation, it is not the run time limit:
|
|
Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
|
|
*/
|
|
.section .stack
|
|
.align 3
|
|
#ifdef __STACK_SIZE
|
|
.equ Stack_Size, __STACK_SIZE
|
|
#else
|
|
.equ Stack_Size, 0xC00
|
|
#endif
|
|
.globl __StackTop
|
|
.globl __StackLimit
|
|
__StackLimit:
|
|
.space Stack_Size
|
|
.size __StackLimit, . - __StackLimit
|
|
__StackTop:
|
|
.size __StackTop, . - __StackTop
|
|
|
|
.section .heap
|
|
.align 3
|
|
#ifdef __HEAP_SIZE
|
|
.equ Heap_Size, __HEAP_SIZE
|
|
#else
|
|
.equ Heap_Size, 0x400
|
|
#endif
|
|
.globl __HeapBase
|
|
.globl __HeapLimit
|
|
__HeapBase:
|
|
.space Heap_Size
|
|
.size __HeapBase, . - __HeapBase
|
|
__HeapLimit:
|
|
.size __HeapLimit, . - __HeapLimit
|
|
|
|
.section .vector_table,"a",%progbits
|
|
.align 2
|
|
.globl __isr_vector
|
|
__isr_vector:
|
|
.long __StackTop /* Top of Stack */
|
|
.long Reset_Handler /* Reset Handler */
|
|
.long NMI_Handler /* NMI Handler */
|
|
.long HardFault_Handler /* Hard Fault Handler */
|
|
.long MemManage_Handler /* MPU Fault Handler */
|
|
.long BusFault_Handler /* Bus Fault Handler */
|
|
.long UsageFault_Handler /* Usage Fault Handler */
|
|
.long 0 /* Reserved */
|
|
.long 0 /* Reserved */
|
|
.long 0 /* Reserved */
|
|
.long 0 /* Reserved */
|
|
.long SVC_Handler /* SVCall Handler */
|
|
.long DebugMon_Handler /* Debug Monitor Handler */
|
|
.long 0 /* Reserved */
|
|
.long PendSV_Handler /* PendSV Handler */
|
|
.long SysTick_Handler /* SysTick Handler */
|
|
|
|
/* External Interrupts */
|
|
.long DMA0_IRQHandler /* DMA Channel 0 Transfer Complete */
|
|
.long DMA1_IRQHandler /* DMA Channel 1 Transfer Complete */
|
|
.long DMA2_IRQHandler /* DMA Channel 2 Transfer Complete */
|
|
.long DMA3_IRQHandler /* DMA Channel 3 Transfer Complete */
|
|
.long DMA4_IRQHandler /* DMA Channel 4 Transfer Complete */
|
|
.long DMA5_IRQHandler /* DMA Channel 5 Transfer Complete */
|
|
.long DMA6_IRQHandler /* DMA Channel 6 Transfer Complete */
|
|
.long DMA7_IRQHandler /* DMA Channel 7 Transfer Complete */
|
|
.long DMA8_IRQHandler /* DMA Channel 8 Transfer Complete */
|
|
.long DMA9_IRQHandler /* DMA Channel 9 Transfer Complete */
|
|
.long DMA10_IRQHandler /* DMA Channel 10 Transfer Complete */
|
|
.long DMA11_IRQHandler /* DMA Channel 11 Transfer Complete */
|
|
.long DMA12_IRQHandler /* DMA Channel 12 Transfer Complete */
|
|
.long DMA13_IRQHandler /* DMA Channel 13 Transfer Complete */
|
|
.long DMA14_IRQHandler /* DMA Channel 14 Transfer Complete */
|
|
.long DMA15_IRQHandler /* DMA Channel 15 Transfer Complete */
|
|
.long DMA_Error_IRQHandler /* DMA Error Interrupt */
|
|
.long MCM_IRQHandler /* Normal Interrupt */
|
|
.long FTFE_IRQHandler /* FTFE Command complete interrupt */
|
|
.long Read_Collision_IRQHandler /* Read Collision Interrupt */
|
|
.long LVD_LVW_IRQHandler /* Low Voltage Detect, Low Voltage Warning */
|
|
.long LLW_IRQHandler /* Low Leakage Wakeup */
|
|
.long Watchdog_IRQHandler /* WDOG Interrupt */
|
|
.long RNG_IRQHandler /* RNG Interrupt */
|
|
.long I2C0_IRQHandler /* I2C0 interrupt */
|
|
.long I2C1_IRQHandler /* I2C1 interrupt */
|
|
.long SPI0_IRQHandler /* SPI0 Interrupt */
|
|
.long SPI1_IRQHandler /* SPI1 Interrupt */
|
|
.long I2S0_Tx_IRQHandler /* I2S0 transmit interrupt */
|
|
.long I2S0_Rx_IRQHandler /* I2S0 receive interrupt */
|
|
.long UART0_LON_IRQHandler /* UART0 LON interrupt */
|
|
.long UART0_RX_TX_IRQHandler /* UART0 Receive/Transmit interrupt */
|
|
.long UART0_ERR_IRQHandler /* UART0 Error interrupt */
|
|
.long UART1_RX_TX_IRQHandler /* UART1 Receive/Transmit interrupt */
|
|
.long UART1_ERR_IRQHandler /* UART1 Error interrupt */
|
|
.long UART2_RX_TX_IRQHandler /* UART2 Receive/Transmit interrupt */
|
|
.long UART2_ERR_IRQHandler /* UART2 Error interrupt */
|
|
.long UART3_RX_TX_IRQHandler /* UART3 Receive/Transmit interrupt */
|
|
.long UART3_ERR_IRQHandler /* UART3 Error interrupt */
|
|
.long ADC0_IRQHandler /* ADC0 interrupt */
|
|
.long CMP0_IRQHandler /* CMP0 interrupt */
|
|
.long CMP1_IRQHandler /* CMP1 interrupt */
|
|
.long FTM0_IRQHandler /* FTM0 fault, overflow and channels interrupt */
|
|
.long FTM1_IRQHandler /* FTM1 fault, overflow and channels interrupt */
|
|
.long FTM2_IRQHandler /* FTM2 fault, overflow and channels interrupt */
|
|
.long CMT_IRQHandler /* CMT interrupt */
|
|
.long RTC_IRQHandler /* RTC interrupt */
|
|
.long RTC_Seconds_IRQHandler /* RTC seconds interrupt */
|
|
.long PIT0_IRQHandler /* PIT timer channel 0 interrupt */
|
|
.long PIT1_IRQHandler /* PIT timer channel 1 interrupt */
|
|
.long PIT2_IRQHandler /* PIT timer channel 2 interrupt */
|
|
.long PIT3_IRQHandler /* PIT timer channel 3 interrupt */
|
|
.long PDB0_IRQHandler /* PDB0 Interrupt */
|
|
.long USB0_IRQHandler /* USB0 interrupt */
|
|
.long USBDCD_IRQHandler /* USBDCD Interrupt */
|
|
.long Reserved71_IRQHandler /* Reserved interrupt 71 */
|
|
.long DAC0_IRQHandler /* DAC0 interrupt */
|
|
.long MCG_IRQHandler /* MCG Interrupt */
|
|
.long LPTimer_IRQHandler /* LPTimer interrupt */
|
|
.long PORTA_IRQHandler /* Port A interrupt */
|
|
.long PORTB_IRQHandler /* Port B interrupt */
|
|
.long PORTC_IRQHandler /* Port C interrupt */
|
|
.long PORTD_IRQHandler /* Port D interrupt */
|
|
.long PORTE_IRQHandler /* Port E interrupt */
|
|
.long SWI_IRQHandler /* Software interrupt */
|
|
.long SPI2_IRQHandler /* SPI2 Interrupt */
|
|
.long UART4_RX_TX_IRQHandler /* UART4 Receive/Transmit interrupt */
|
|
.long UART4_ERR_IRQHandler /* UART4 Error interrupt */
|
|
.long UART5_RX_TX_IRQHandler /* UART5 Receive/Transmit interrupt */
|
|
.long UART5_ERR_IRQHandler /* UART5 Error interrupt */
|
|
.long CMP2_IRQHandler /* CMP2 interrupt */
|
|
.long FTM3_IRQHandler /* FTM3 fault, overflow and channels interrupt */
|
|
.long DAC1_IRQHandler /* DAC1 interrupt */
|
|
.long ADC1_IRQHandler /* ADC1 interrupt */
|
|
.long I2C2_IRQHandler /* I2C2 interrupt */
|
|
.long CAN0_ORed_Message_buffer_IRQHandler /* CAN0 OR'd message buffers interrupt */
|
|
.long CAN0_Bus_Off_IRQHandler /* CAN0 bus off interrupt */
|
|
.long CAN0_Error_IRQHandler /* CAN0 error interrupt */
|
|
.long CAN0_Tx_Warning_IRQHandler /* CAN0 Tx warning interrupt */
|
|
.long CAN0_Rx_Warning_IRQHandler /* CAN0 Rx warning interrupt */
|
|
.long CAN0_Wake_Up_IRQHandler /* CAN0 wake up interrupt */
|
|
.long SDHC_IRQHandler /* SDHC interrupt */
|
|
.long ENET_1588_Timer_IRQHandler /* Ethernet MAC IEEE 1588 Timer Interrupt */
|
|
.long ENET_Transmit_IRQHandler /* Ethernet MAC Transmit Interrupt */
|
|
.long ENET_Receive_IRQHandler /* Ethernet MAC Receive Interrupt */
|
|
.long ENET_Error_IRQHandler /* Ethernet MAC Error and miscelaneous Interrupt */
|
|
|
|
.size __isr_vector, . - __isr_vector
|
|
|
|
.section .text.Reset_Handler
|
|
.thumb
|
|
.thumb_func
|
|
.align 2
|
|
.globl Reset_Handler
|
|
.type Reset_Handler, %function
|
|
Reset_Handler:
|
|
/* Loop to copy data from read only memory to RAM. The ranges
|
|
* of copy from/to are specified by following symbols evaluated in
|
|
* linker script.
|
|
* __etext: End of code section, i.e., begin of data sections to copy from.
|
|
* __data_start__/__data_end__: RAM address range that data should be
|
|
* copied to. Both must be aligned to 4 bytes boundary. */
|
|
|
|
disable_watchdog:
|
|
/* unlock */
|
|
ldr r1, =0x4005200e
|
|
ldr r0, =0xc520
|
|
strh r0, [r1]
|
|
ldr r0, =0xd928
|
|
strh r0, [r1]
|
|
/* disable */
|
|
ldr r1, =0x40052000
|
|
ldr r0, =0x01d2
|
|
strh r0, [r1]
|
|
|
|
ldr r1, =__etext
|
|
ldr r2, =__data_start__
|
|
ldr r3, =__data_end__
|
|
|
|
subs r3, r2
|
|
ble .Lflash_to_ram_loop_end
|
|
|
|
movs r4, 0
|
|
.Lflash_to_ram_loop:
|
|
ldr r0, [r1,r4]
|
|
str r0, [r2,r4]
|
|
adds r4, 4
|
|
cmp r4, r3
|
|
blt .Lflash_to_ram_loop
|
|
.Lflash_to_ram_loop_end:
|
|
|
|
ldr r0, =SystemInit
|
|
blx r0
|
|
ldr r0, =init_data_bss
|
|
blx r0
|
|
ldr r0, =main
|
|
bx r0
|
|
.pool
|
|
.size Reset_Handler, . - Reset_Handler
|
|
|
|
.text
|
|
/* Macro to define default handlers. Default handler
|
|
* will be weak symbol and just dead loops. They can be
|
|
* overwritten by other handlers */
|
|
.macro def_default_handler handler_name
|
|
.align 1
|
|
.thumb_func
|
|
.weak \handler_name
|
|
.type \handler_name, %function
|
|
\handler_name :
|
|
b .
|
|
.size \handler_name, . - \handler_name
|
|
.endm
|
|
|
|
/* Exception Handlers */
|
|
|
|
def_default_handler NMI_Handler
|
|
def_default_handler HardFault_Handler
|
|
def_default_handler MemManage_Handler
|
|
def_default_handler BusFault_Handler
|
|
def_default_handler UsageFault_Handler
|
|
def_default_handler SVC_Handler
|
|
def_default_handler DebugMon_Handler
|
|
def_default_handler PendSV_Handler
|
|
def_default_handler SysTick_Handler
|
|
def_default_handler Default_Handler
|
|
|
|
.macro def_irq_default_handler handler_name
|
|
.weak \handler_name
|
|
.set \handler_name, Default_Handler
|
|
.endm
|
|
|
|
/* IRQ Handlers */
|
|
def_irq_default_handler DMA0_IRQHandler
|
|
def_irq_default_handler DMA1_IRQHandler
|
|
def_irq_default_handler DMA2_IRQHandler
|
|
def_irq_default_handler DMA3_IRQHandler
|
|
def_irq_default_handler DMA4_IRQHandler
|
|
def_irq_default_handler DMA5_IRQHandler
|
|
def_irq_default_handler DMA6_IRQHandler
|
|
def_irq_default_handler DMA7_IRQHandler
|
|
def_irq_default_handler DMA8_IRQHandler
|
|
def_irq_default_handler DMA9_IRQHandler
|
|
def_irq_default_handler DMA10_IRQHandler
|
|
def_irq_default_handler DMA11_IRQHandler
|
|
def_irq_default_handler DMA12_IRQHandler
|
|
def_irq_default_handler DMA13_IRQHandler
|
|
def_irq_default_handler DMA14_IRQHandler
|
|
def_irq_default_handler DMA15_IRQHandler
|
|
def_irq_default_handler DMA_Error_IRQHandler
|
|
def_irq_default_handler MCM_IRQHandler
|
|
def_irq_default_handler FTFE_IRQHandler
|
|
def_irq_default_handler Read_Collision_IRQHandler
|
|
def_irq_default_handler LVD_LVW_IRQHandler
|
|
def_irq_default_handler LLW_IRQHandler
|
|
def_irq_default_handler Watchdog_IRQHandler
|
|
def_irq_default_handler RNG_IRQHandler
|
|
def_irq_default_handler I2C0_IRQHandler
|
|
def_irq_default_handler I2C1_IRQHandler
|
|
def_irq_default_handler SPI0_IRQHandler
|
|
def_irq_default_handler SPI1_IRQHandler
|
|
def_irq_default_handler I2S0_Tx_IRQHandler
|
|
def_irq_default_handler I2S0_Rx_IRQHandler
|
|
def_irq_default_handler UART0_LON_IRQHandler
|
|
def_irq_default_handler UART0_RX_TX_IRQHandler
|
|
def_irq_default_handler UART0_ERR_IRQHandler
|
|
def_irq_default_handler UART1_RX_TX_IRQHandler
|
|
def_irq_default_handler UART1_ERR_IRQHandler
|
|
def_irq_default_handler UART2_RX_TX_IRQHandler
|
|
def_irq_default_handler UART2_ERR_IRQHandler
|
|
def_irq_default_handler UART3_RX_TX_IRQHandler
|
|
def_irq_default_handler UART3_ERR_IRQHandler
|
|
def_irq_default_handler ADC0_IRQHandler
|
|
def_irq_default_handler CMP0_IRQHandler
|
|
def_irq_default_handler CMP1_IRQHandler
|
|
def_irq_default_handler FTM0_IRQHandler
|
|
def_irq_default_handler FTM1_IRQHandler
|
|
def_irq_default_handler FTM2_IRQHandler
|
|
def_irq_default_handler CMT_IRQHandler
|
|
def_irq_default_handler RTC_IRQHandler
|
|
def_irq_default_handler RTC_Seconds_IRQHandler
|
|
def_irq_default_handler PIT0_IRQHandler
|
|
def_irq_default_handler PIT1_IRQHandler
|
|
def_irq_default_handler PIT2_IRQHandler
|
|
def_irq_default_handler PIT3_IRQHandler
|
|
def_irq_default_handler PDB0_IRQHandler
|
|
def_irq_default_handler USB0_IRQHandler
|
|
def_irq_default_handler USBDCD_IRQHandler
|
|
def_irq_default_handler Reserved71_IRQHandler
|
|
def_irq_default_handler DAC0_IRQHandler
|
|
def_irq_default_handler MCG_IRQHandler
|
|
def_irq_default_handler LPTimer_IRQHandler
|
|
def_irq_default_handler PORTA_IRQHandler
|
|
def_irq_default_handler PORTB_IRQHandler
|
|
def_irq_default_handler PORTC_IRQHandler
|
|
def_irq_default_handler PORTD_IRQHandler
|
|
def_irq_default_handler PORTE_IRQHandler
|
|
def_irq_default_handler SWI_IRQHandler
|
|
def_irq_default_handler SPI2_IRQHandler
|
|
def_irq_default_handler UART4_RX_TX_IRQHandler
|
|
def_irq_default_handler UART4_ERR_IRQHandler
|
|
def_irq_default_handler UART5_RX_TX_IRQHandler
|
|
def_irq_default_handler UART5_ERR_IRQHandler
|
|
def_irq_default_handler CMP2_IRQHandler
|
|
def_irq_default_handler FTM3_IRQHandler
|
|
def_irq_default_handler DAC1_IRQHandler
|
|
def_irq_default_handler ADC1_IRQHandler
|
|
def_irq_default_handler I2C2_IRQHandler
|
|
def_irq_default_handler CAN0_ORed_Message_buffer_IRQHandler
|
|
def_irq_default_handler CAN0_Bus_Off_IRQHandler
|
|
def_irq_default_handler CAN0_Error_IRQHandler
|
|
def_irq_default_handler CAN0_Tx_Warning_IRQHandler
|
|
def_irq_default_handler CAN0_Rx_Warning_IRQHandler
|
|
def_irq_default_handler CAN0_Wake_Up_IRQHandler
|
|
def_irq_default_handler SDHC_IRQHandler
|
|
def_irq_default_handler ENET_1588_Timer_IRQHandler
|
|
def_irq_default_handler ENET_Transmit_IRQHandler
|
|
def_irq_default_handler ENET_Receive_IRQHandler
|
|
def_irq_default_handler ENET_Error_IRQHandler
|
|
def_irq_default_handler DefaultISR
|
|
|
|
/* Flash protection region, placed at 0x400 */
|
|
.text
|
|
.thumb
|
|
.align 2
|
|
.section .kinetis_flash_config_field,"a",%progbits
|
|
kinetis_flash_config:
|
|
.long 0xffffffff
|
|
.long 0xffffffff
|
|
.long 0xffffffff
|
|
.long 0xfffffffe
|
|
|
|
.end
|