1195 lines
41 KiB
C
1195 lines
41 KiB
C
/*
|
|
* Copyright (c) 2014, Freescale Semiconductor, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
|
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*/
|
|
/*
|
|
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
|
|
*
|
|
* This file was generated automatically and any changes may be lost.
|
|
*/
|
|
#ifndef __HW_CMT_REGISTERS_H__
|
|
#define __HW_CMT_REGISTERS_H__
|
|
|
|
#include "regs.h"
|
|
|
|
/*
|
|
* MK64F12 CMT
|
|
*
|
|
* Carrier Modulator Transmitter
|
|
*
|
|
* Registers defined in this header file:
|
|
* - HW_CMT_CGH1 - CMT Carrier Generator High Data Register 1
|
|
* - HW_CMT_CGL1 - CMT Carrier Generator Low Data Register 1
|
|
* - HW_CMT_CGH2 - CMT Carrier Generator High Data Register 2
|
|
* - HW_CMT_CGL2 - CMT Carrier Generator Low Data Register 2
|
|
* - HW_CMT_OC - CMT Output Control Register
|
|
* - HW_CMT_MSC - CMT Modulator Status and Control Register
|
|
* - HW_CMT_CMD1 - CMT Modulator Data Register Mark High
|
|
* - HW_CMT_CMD2 - CMT Modulator Data Register Mark Low
|
|
* - HW_CMT_CMD3 - CMT Modulator Data Register Space High
|
|
* - HW_CMT_CMD4 - CMT Modulator Data Register Space Low
|
|
* - HW_CMT_PPS - CMT Primary Prescaler Register
|
|
* - HW_CMT_DMA - CMT Direct Memory Access Register
|
|
*
|
|
* - hw_cmt_t - Struct containing all module registers.
|
|
*/
|
|
|
|
//! @name Module base addresses
|
|
//@{
|
|
#ifndef REGS_CMT_BASE
|
|
#define HW_CMT_INSTANCE_COUNT (1U) //!< Number of instances of the CMT module.
|
|
#define REGS_CMT_BASE (0x40062000U) //!< Base address for CMT.
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CGH1 - CMT Carrier Generator High Data Register 1
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CGH1 - CMT Carrier Generator High Data Register 1 (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This data register contains the primary high value for generating the carrier
|
|
* output.
|
|
*/
|
|
typedef union _hw_cmt_cgh1
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cgh1_bitfields
|
|
{
|
|
uint8_t PH : 8; //!< [7:0] Primary Carrier High Time Data Value
|
|
} B;
|
|
} hw_cmt_cgh1_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CGH1 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CGH1_ADDR (REGS_CMT_BASE + 0x0U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CGH1 (*(__IO hw_cmt_cgh1_t *) HW_CMT_CGH1_ADDR)
|
|
#define HW_CMT_CGH1_RD() (HW_CMT_CGH1.U)
|
|
#define HW_CMT_CGH1_WR(v) (HW_CMT_CGH1.U = (v))
|
|
#define HW_CMT_CGH1_SET(v) (HW_CMT_CGH1_WR(HW_CMT_CGH1_RD() | (v)))
|
|
#define HW_CMT_CGH1_CLR(v) (HW_CMT_CGH1_WR(HW_CMT_CGH1_RD() & ~(v)))
|
|
#define HW_CMT_CGH1_TOG(v) (HW_CMT_CGH1_WR(HW_CMT_CGH1_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CGH1 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CGH1, field PH[7:0] (RW)
|
|
*
|
|
* Contains the number of input clocks required to generate the carrier high
|
|
* time period. When operating in Time mode, this register is always selected. When
|
|
* operating in FSK mode, this register and the secondary register pair are
|
|
* alternately selected under the control of the modulator. The primary carrier high
|
|
* time value is undefined out of reset. This register must be written to nonzero
|
|
* values before the carrier generator is enabled to avoid spurious results.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CGH1_PH (0U) //!< Bit position for CMT_CGH1_PH.
|
|
#define BM_CMT_CGH1_PH (0xFFU) //!< Bit mask for CMT_CGH1_PH.
|
|
#define BS_CMT_CGH1_PH (8U) //!< Bit field size in bits for CMT_CGH1_PH.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CGH1_PH field.
|
|
#define BR_CMT_CGH1_PH (HW_CMT_CGH1.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CGH1_PH.
|
|
#define BF_CMT_CGH1_PH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGH1_PH), uint8_t) & BM_CMT_CGH1_PH)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the PH field to a new value.
|
|
#define BW_CMT_CGH1_PH(v) (HW_CMT_CGH1_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CGL1 - CMT Carrier Generator Low Data Register 1
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CGL1 - CMT Carrier Generator Low Data Register 1 (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This data register contains the primary low value for generating the carrier
|
|
* output.
|
|
*/
|
|
typedef union _hw_cmt_cgl1
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cgl1_bitfields
|
|
{
|
|
uint8_t PL : 8; //!< [7:0] Primary Carrier Low Time Data Value
|
|
} B;
|
|
} hw_cmt_cgl1_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CGL1 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CGL1_ADDR (REGS_CMT_BASE + 0x1U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CGL1 (*(__IO hw_cmt_cgl1_t *) HW_CMT_CGL1_ADDR)
|
|
#define HW_CMT_CGL1_RD() (HW_CMT_CGL1.U)
|
|
#define HW_CMT_CGL1_WR(v) (HW_CMT_CGL1.U = (v))
|
|
#define HW_CMT_CGL1_SET(v) (HW_CMT_CGL1_WR(HW_CMT_CGL1_RD() | (v)))
|
|
#define HW_CMT_CGL1_CLR(v) (HW_CMT_CGL1_WR(HW_CMT_CGL1_RD() & ~(v)))
|
|
#define HW_CMT_CGL1_TOG(v) (HW_CMT_CGL1_WR(HW_CMT_CGL1_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CGL1 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CGL1, field PL[7:0] (RW)
|
|
*
|
|
* Contains the number of input clocks required to generate the carrier low time
|
|
* period. When operating in Time mode, this register is always selected. When
|
|
* operating in FSK mode, this register and the secondary register pair are
|
|
* alternately selected under the control of the modulator. The primary carrier low
|
|
* time value is undefined out of reset. This register must be written to nonzero
|
|
* values before the carrier generator is enabled to avoid spurious results.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CGL1_PL (0U) //!< Bit position for CMT_CGL1_PL.
|
|
#define BM_CMT_CGL1_PL (0xFFU) //!< Bit mask for CMT_CGL1_PL.
|
|
#define BS_CMT_CGL1_PL (8U) //!< Bit field size in bits for CMT_CGL1_PL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CGL1_PL field.
|
|
#define BR_CMT_CGL1_PL (HW_CMT_CGL1.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CGL1_PL.
|
|
#define BF_CMT_CGL1_PL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGL1_PL), uint8_t) & BM_CMT_CGL1_PL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the PL field to a new value.
|
|
#define BW_CMT_CGL1_PL(v) (HW_CMT_CGL1_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CGH2 - CMT Carrier Generator High Data Register 2
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CGH2 - CMT Carrier Generator High Data Register 2 (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This data register contains the secondary high value for generating the
|
|
* carrier output.
|
|
*/
|
|
typedef union _hw_cmt_cgh2
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cgh2_bitfields
|
|
{
|
|
uint8_t SH : 8; //!< [7:0] Secondary Carrier High Time Data Value
|
|
} B;
|
|
} hw_cmt_cgh2_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CGH2 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CGH2_ADDR (REGS_CMT_BASE + 0x2U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CGH2 (*(__IO hw_cmt_cgh2_t *) HW_CMT_CGH2_ADDR)
|
|
#define HW_CMT_CGH2_RD() (HW_CMT_CGH2.U)
|
|
#define HW_CMT_CGH2_WR(v) (HW_CMT_CGH2.U = (v))
|
|
#define HW_CMT_CGH2_SET(v) (HW_CMT_CGH2_WR(HW_CMT_CGH2_RD() | (v)))
|
|
#define HW_CMT_CGH2_CLR(v) (HW_CMT_CGH2_WR(HW_CMT_CGH2_RD() & ~(v)))
|
|
#define HW_CMT_CGH2_TOG(v) (HW_CMT_CGH2_WR(HW_CMT_CGH2_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CGH2 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CGH2, field SH[7:0] (RW)
|
|
*
|
|
* Contains the number of input clocks required to generate the carrier high
|
|
* time period. When operating in Time mode, this register is never selected. When
|
|
* operating in FSK mode, this register and the primary register pair are
|
|
* alternately selected under control of the modulator. The secondary carrier high time
|
|
* value is undefined out of reset. This register must be written to nonzero
|
|
* values before the carrier generator is enabled when operating in FSK mode.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CGH2_SH (0U) //!< Bit position for CMT_CGH2_SH.
|
|
#define BM_CMT_CGH2_SH (0xFFU) //!< Bit mask for CMT_CGH2_SH.
|
|
#define BS_CMT_CGH2_SH (8U) //!< Bit field size in bits for CMT_CGH2_SH.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CGH2_SH field.
|
|
#define BR_CMT_CGH2_SH (HW_CMT_CGH2.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CGH2_SH.
|
|
#define BF_CMT_CGH2_SH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGH2_SH), uint8_t) & BM_CMT_CGH2_SH)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the SH field to a new value.
|
|
#define BW_CMT_CGH2_SH(v) (HW_CMT_CGH2_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CGL2 - CMT Carrier Generator Low Data Register 2
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CGL2 - CMT Carrier Generator Low Data Register 2 (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This data register contains the secondary low value for generating the
|
|
* carrier output.
|
|
*/
|
|
typedef union _hw_cmt_cgl2
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cgl2_bitfields
|
|
{
|
|
uint8_t SL : 8; //!< [7:0] Secondary Carrier Low Time Data Value
|
|
} B;
|
|
} hw_cmt_cgl2_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CGL2 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CGL2_ADDR (REGS_CMT_BASE + 0x3U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CGL2 (*(__IO hw_cmt_cgl2_t *) HW_CMT_CGL2_ADDR)
|
|
#define HW_CMT_CGL2_RD() (HW_CMT_CGL2.U)
|
|
#define HW_CMT_CGL2_WR(v) (HW_CMT_CGL2.U = (v))
|
|
#define HW_CMT_CGL2_SET(v) (HW_CMT_CGL2_WR(HW_CMT_CGL2_RD() | (v)))
|
|
#define HW_CMT_CGL2_CLR(v) (HW_CMT_CGL2_WR(HW_CMT_CGL2_RD() & ~(v)))
|
|
#define HW_CMT_CGL2_TOG(v) (HW_CMT_CGL2_WR(HW_CMT_CGL2_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CGL2 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CGL2, field SL[7:0] (RW)
|
|
*
|
|
* Contains the number of input clocks required to generate the carrier low time
|
|
* period. When operating in Time mode, this register is never selected. When
|
|
* operating in FSK mode, this register and the primary register pair are
|
|
* alternately selected under the control of the modulator. The secondary carrier low time
|
|
* value is undefined out of reset. This register must be written to nonzero
|
|
* values before the carrier generator is enabled when operating in FSK mode.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CGL2_SL (0U) //!< Bit position for CMT_CGL2_SL.
|
|
#define BM_CMT_CGL2_SL (0xFFU) //!< Bit mask for CMT_CGL2_SL.
|
|
#define BS_CMT_CGL2_SL (8U) //!< Bit field size in bits for CMT_CGL2_SL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CGL2_SL field.
|
|
#define BR_CMT_CGL2_SL (HW_CMT_CGL2.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CGL2_SL.
|
|
#define BF_CMT_CGL2_SL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CGL2_SL), uint8_t) & BM_CMT_CGL2_SL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the SL field to a new value.
|
|
#define BW_CMT_CGL2_SL(v) (HW_CMT_CGL2_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_OC - CMT Output Control Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_OC - CMT Output Control Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This register is used to control the IRO signal of the CMT module.
|
|
*/
|
|
typedef union _hw_cmt_oc
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_oc_bitfields
|
|
{
|
|
uint8_t RESERVED0 : 5; //!< [4:0]
|
|
uint8_t IROPEN : 1; //!< [5] IRO Pin Enable
|
|
uint8_t CMTPOL : 1; //!< [6] CMT Output Polarity
|
|
uint8_t IROL : 1; //!< [7] IRO Latch Control
|
|
} B;
|
|
} hw_cmt_oc_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_OC register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_OC_ADDR (REGS_CMT_BASE + 0x4U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_OC (*(__IO hw_cmt_oc_t *) HW_CMT_OC_ADDR)
|
|
#define HW_CMT_OC_RD() (HW_CMT_OC.U)
|
|
#define HW_CMT_OC_WR(v) (HW_CMT_OC.U = (v))
|
|
#define HW_CMT_OC_SET(v) (HW_CMT_OC_WR(HW_CMT_OC_RD() | (v)))
|
|
#define HW_CMT_OC_CLR(v) (HW_CMT_OC_WR(HW_CMT_OC_RD() & ~(v)))
|
|
#define HW_CMT_OC_TOG(v) (HW_CMT_OC_WR(HW_CMT_OC_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_OC bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_OC, field IROPEN[5] (RW)
|
|
*
|
|
* Enables and disables the IRO signal. When the IRO signal is enabled, it is an
|
|
* output that drives out either the CMT transmitter output or the state of IROL
|
|
* depending on whether MSC[MCGEN] is set or not. Also, the state of output is
|
|
* either inverted or non-inverted, depending on the state of CMTPOL. When the IRO
|
|
* signal is disabled, it is in a high-impedance state and is unable to draw any
|
|
* current. This signal is disabled during reset.
|
|
*
|
|
* Values:
|
|
* - 0 - The IRO signal is disabled.
|
|
* - 1 - The IRO signal is enabled as output.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_OC_IROPEN (5U) //!< Bit position for CMT_OC_IROPEN.
|
|
#define BM_CMT_OC_IROPEN (0x20U) //!< Bit mask for CMT_OC_IROPEN.
|
|
#define BS_CMT_OC_IROPEN (1U) //!< Bit field size in bits for CMT_OC_IROPEN.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_OC_IROPEN field.
|
|
#define BR_CMT_OC_IROPEN (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROPEN))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_OC_IROPEN.
|
|
#define BF_CMT_OC_IROPEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_OC_IROPEN), uint8_t) & BM_CMT_OC_IROPEN)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the IROPEN field to a new value.
|
|
#define BW_CMT_OC_IROPEN(v) (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROPEN) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_OC, field CMTPOL[6] (RW)
|
|
*
|
|
* Controls the polarity of the IRO signal.
|
|
*
|
|
* Values:
|
|
* - 0 - The IRO signal is active-low.
|
|
* - 1 - The IRO signal is active-high.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_OC_CMTPOL (6U) //!< Bit position for CMT_OC_CMTPOL.
|
|
#define BM_CMT_OC_CMTPOL (0x40U) //!< Bit mask for CMT_OC_CMTPOL.
|
|
#define BS_CMT_OC_CMTPOL (1U) //!< Bit field size in bits for CMT_OC_CMTPOL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_OC_CMTPOL field.
|
|
#define BR_CMT_OC_CMTPOL (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_CMTPOL))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_OC_CMTPOL.
|
|
#define BF_CMT_OC_CMTPOL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_OC_CMTPOL), uint8_t) & BM_CMT_OC_CMTPOL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the CMTPOL field to a new value.
|
|
#define BW_CMT_OC_CMTPOL(v) (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_CMTPOL) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_OC, field IROL[7] (RW)
|
|
*
|
|
* Reads the state of the IRO latch. Writing to IROL changes the state of the
|
|
* IRO signal when MSC[MCGEN] is cleared and IROPEN is set.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_OC_IROL (7U) //!< Bit position for CMT_OC_IROL.
|
|
#define BM_CMT_OC_IROL (0x80U) //!< Bit mask for CMT_OC_IROL.
|
|
#define BS_CMT_OC_IROL (1U) //!< Bit field size in bits for CMT_OC_IROL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_OC_IROL field.
|
|
#define BR_CMT_OC_IROL (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROL))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_OC_IROL.
|
|
#define BF_CMT_OC_IROL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_OC_IROL), uint8_t) & BM_CMT_OC_IROL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the IROL field to a new value.
|
|
#define BW_CMT_OC_IROL(v) (BITBAND_ACCESS8(HW_CMT_OC_ADDR, BP_CMT_OC_IROL) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_MSC - CMT Modulator Status and Control Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_MSC - CMT Modulator Status and Control Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This register contains the modulator and carrier generator enable (MCGEN),
|
|
* end of cycle interrupt enable (EOCIE), FSK mode select (FSK), baseband enable
|
|
* (BASE), extended space (EXSPC), prescaler (CMTDIV) bits, and the end of cycle
|
|
* (EOCF) status bit.
|
|
*/
|
|
typedef union _hw_cmt_msc
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_msc_bitfields
|
|
{
|
|
uint8_t MCGEN : 1; //!< [0] Modulator and Carrier Generator Enable
|
|
uint8_t EOCIE : 1; //!< [1] End of Cycle Interrupt Enable
|
|
uint8_t FSK : 1; //!< [2] FSK Mode Select
|
|
uint8_t BASE : 1; //!< [3] Baseband Enable
|
|
uint8_t EXSPC : 1; //!< [4] Extended Space Enable
|
|
uint8_t CMTDIV : 2; //!< [6:5] CMT Clock Divide Prescaler
|
|
uint8_t EOCF : 1; //!< [7] End Of Cycle Status Flag
|
|
} B;
|
|
} hw_cmt_msc_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_MSC register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_MSC_ADDR (REGS_CMT_BASE + 0x5U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_MSC (*(__IO hw_cmt_msc_t *) HW_CMT_MSC_ADDR)
|
|
#define HW_CMT_MSC_RD() (HW_CMT_MSC.U)
|
|
#define HW_CMT_MSC_WR(v) (HW_CMT_MSC.U = (v))
|
|
#define HW_CMT_MSC_SET(v) (HW_CMT_MSC_WR(HW_CMT_MSC_RD() | (v)))
|
|
#define HW_CMT_MSC_CLR(v) (HW_CMT_MSC_WR(HW_CMT_MSC_RD() & ~(v)))
|
|
#define HW_CMT_MSC_TOG(v) (HW_CMT_MSC_WR(HW_CMT_MSC_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_MSC bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field MCGEN[0] (RW)
|
|
*
|
|
* Setting MCGEN will initialize the carrier generator and modulator and will
|
|
* enable all clocks. When enabled, the carrier generator and modulator will
|
|
* function continuously. When MCGEN is cleared, the current modulator cycle will be
|
|
* allowed to expire before all carrier and modulator clocks are disabled to save
|
|
* power and the modulator output is forced low. To prevent spurious operation,
|
|
* the user should initialize all data and control registers before enabling the
|
|
* system.
|
|
*
|
|
* Values:
|
|
* - 0 - Modulator and carrier generator disabled
|
|
* - 1 - Modulator and carrier generator enabled
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_MCGEN (0U) //!< Bit position for CMT_MSC_MCGEN.
|
|
#define BM_CMT_MSC_MCGEN (0x01U) //!< Bit mask for CMT_MSC_MCGEN.
|
|
#define BS_CMT_MSC_MCGEN (1U) //!< Bit field size in bits for CMT_MSC_MCGEN.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_MCGEN field.
|
|
#define BR_CMT_MSC_MCGEN (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_MCGEN))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_MSC_MCGEN.
|
|
#define BF_CMT_MSC_MCGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_MCGEN), uint8_t) & BM_CMT_MSC_MCGEN)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the MCGEN field to a new value.
|
|
#define BW_CMT_MSC_MCGEN(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_MCGEN) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field EOCIE[1] (RW)
|
|
*
|
|
* Requests to enable a CPU interrupt when EOCF is set if EOCIE is high.
|
|
*
|
|
* Values:
|
|
* - 0 - CPU interrupt is disabled.
|
|
* - 1 - CPU interrupt is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_EOCIE (1U) //!< Bit position for CMT_MSC_EOCIE.
|
|
#define BM_CMT_MSC_EOCIE (0x02U) //!< Bit mask for CMT_MSC_EOCIE.
|
|
#define BS_CMT_MSC_EOCIE (1U) //!< Bit field size in bits for CMT_MSC_EOCIE.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_EOCIE field.
|
|
#define BR_CMT_MSC_EOCIE (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EOCIE))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_MSC_EOCIE.
|
|
#define BF_CMT_MSC_EOCIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_EOCIE), uint8_t) & BM_CMT_MSC_EOCIE)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the EOCIE field to a new value.
|
|
#define BW_CMT_MSC_EOCIE(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EOCIE) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field FSK[2] (RW)
|
|
*
|
|
* Enables FSK operation.
|
|
*
|
|
* Values:
|
|
* - 0 - The CMT operates in Time or Baseband mode.
|
|
* - 1 - The CMT operates in FSK mode.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_FSK (2U) //!< Bit position for CMT_MSC_FSK.
|
|
#define BM_CMT_MSC_FSK (0x04U) //!< Bit mask for CMT_MSC_FSK.
|
|
#define BS_CMT_MSC_FSK (1U) //!< Bit field size in bits for CMT_MSC_FSK.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_FSK field.
|
|
#define BR_CMT_MSC_FSK (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_FSK))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_MSC_FSK.
|
|
#define BF_CMT_MSC_FSK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_FSK), uint8_t) & BM_CMT_MSC_FSK)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the FSK field to a new value.
|
|
#define BW_CMT_MSC_FSK(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_FSK) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field BASE[3] (RW)
|
|
*
|
|
* When set, BASE disables the carrier generator and forces the carrier output
|
|
* high for generation of baseband protocols. When BASE is cleared, the carrier
|
|
* generator is enabled and the carrier output toggles at the frequency determined
|
|
* by values stored in the carrier data registers. This field is cleared by
|
|
* reset. This field is not double-buffered and must not be written to during a
|
|
* transmission.
|
|
*
|
|
* Values:
|
|
* - 0 - Baseband mode is disabled.
|
|
* - 1 - Baseband mode is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_BASE (3U) //!< Bit position for CMT_MSC_BASE.
|
|
#define BM_CMT_MSC_BASE (0x08U) //!< Bit mask for CMT_MSC_BASE.
|
|
#define BS_CMT_MSC_BASE (1U) //!< Bit field size in bits for CMT_MSC_BASE.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_BASE field.
|
|
#define BR_CMT_MSC_BASE (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_BASE))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_MSC_BASE.
|
|
#define BF_CMT_MSC_BASE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_BASE), uint8_t) & BM_CMT_MSC_BASE)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the BASE field to a new value.
|
|
#define BW_CMT_MSC_BASE(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_BASE) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field EXSPC[4] (RW)
|
|
*
|
|
* Enables the extended space operation.
|
|
*
|
|
* Values:
|
|
* - 0 - Extended space is disabled.
|
|
* - 1 - Extended space is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_EXSPC (4U) //!< Bit position for CMT_MSC_EXSPC.
|
|
#define BM_CMT_MSC_EXSPC (0x10U) //!< Bit mask for CMT_MSC_EXSPC.
|
|
#define BS_CMT_MSC_EXSPC (1U) //!< Bit field size in bits for CMT_MSC_EXSPC.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_EXSPC field.
|
|
#define BR_CMT_MSC_EXSPC (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EXSPC))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_MSC_EXSPC.
|
|
#define BF_CMT_MSC_EXSPC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_EXSPC), uint8_t) & BM_CMT_MSC_EXSPC)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the EXSPC field to a new value.
|
|
#define BW_CMT_MSC_EXSPC(v) (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EXSPC) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field CMTDIV[6:5] (RW)
|
|
*
|
|
* Causes the CMT to be clocked at the IF signal frequency, or the IF frequency
|
|
* divided by 2 ,4, or 8 . This field must not be changed during a transmission
|
|
* because it is not double-buffered.
|
|
*
|
|
* Values:
|
|
* - 00 - IF * 1
|
|
* - 01 - IF * 2
|
|
* - 10 - IF * 4
|
|
* - 11 - IF * 8
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_CMTDIV (5U) //!< Bit position for CMT_MSC_CMTDIV.
|
|
#define BM_CMT_MSC_CMTDIV (0x60U) //!< Bit mask for CMT_MSC_CMTDIV.
|
|
#define BS_CMT_MSC_CMTDIV (2U) //!< Bit field size in bits for CMT_MSC_CMTDIV.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_CMTDIV field.
|
|
#define BR_CMT_MSC_CMTDIV (HW_CMT_MSC.B.CMTDIV)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_MSC_CMTDIV.
|
|
#define BF_CMT_MSC_CMTDIV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_MSC_CMTDIV), uint8_t) & BM_CMT_MSC_CMTDIV)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the CMTDIV field to a new value.
|
|
#define BW_CMT_MSC_CMTDIV(v) (HW_CMT_MSC_WR((HW_CMT_MSC_RD() & ~BM_CMT_MSC_CMTDIV) | BF_CMT_MSC_CMTDIV(v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMT_MSC, field EOCF[7] (RO)
|
|
*
|
|
* Sets when: The modulator is not currently active and MCGEN is set to begin
|
|
* the initial CMT transmission. At the end of each modulation cycle while MCGEN is
|
|
* set. This is recognized when a match occurs between the contents of the space
|
|
* period register and the down counter. At this time, the counter is
|
|
* initialized with, possibly new contents of the mark period buffer, CMD1 and CMD2, and
|
|
* the space period register is loaded with, possibly new contents of the space
|
|
* period buffer, CMD3 and CMD4. This flag is cleared by reading MSC followed by an
|
|
* access of CMD2 or CMD4, or by the DMA transfer.
|
|
*
|
|
* Values:
|
|
* - 0 - End of modulation cycle has not occured since the flag last cleared.
|
|
* - 1 - End of modulator cycle has occurred.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_MSC_EOCF (7U) //!< Bit position for CMT_MSC_EOCF.
|
|
#define BM_CMT_MSC_EOCF (0x80U) //!< Bit mask for CMT_MSC_EOCF.
|
|
#define BS_CMT_MSC_EOCF (1U) //!< Bit field size in bits for CMT_MSC_EOCF.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_MSC_EOCF field.
|
|
#define BR_CMT_MSC_EOCF (BITBAND_ACCESS8(HW_CMT_MSC_ADDR, BP_CMT_MSC_EOCF))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CMD1 - CMT Modulator Data Register Mark High
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CMD1 - CMT Modulator Data Register Mark High (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* The contents of this register are transferred to the modulator down counter
|
|
* upon the completion of a modulation period.
|
|
*/
|
|
typedef union _hw_cmt_cmd1
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cmd1_bitfields
|
|
{
|
|
uint8_t MB : 8; //!< [7:0]
|
|
} B;
|
|
} hw_cmt_cmd1_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CMD1 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CMD1_ADDR (REGS_CMT_BASE + 0x6U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CMD1 (*(__IO hw_cmt_cmd1_t *) HW_CMT_CMD1_ADDR)
|
|
#define HW_CMT_CMD1_RD() (HW_CMT_CMD1.U)
|
|
#define HW_CMT_CMD1_WR(v) (HW_CMT_CMD1.U = (v))
|
|
#define HW_CMT_CMD1_SET(v) (HW_CMT_CMD1_WR(HW_CMT_CMD1_RD() | (v)))
|
|
#define HW_CMT_CMD1_CLR(v) (HW_CMT_CMD1_WR(HW_CMT_CMD1_RD() & ~(v)))
|
|
#define HW_CMT_CMD1_TOG(v) (HW_CMT_CMD1_WR(HW_CMT_CMD1_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CMD1 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CMD1, field MB[7:0] (RW)
|
|
*
|
|
* Controls the upper mark periods of the modulator for all modes.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CMD1_MB (0U) //!< Bit position for CMT_CMD1_MB.
|
|
#define BM_CMT_CMD1_MB (0xFFU) //!< Bit mask for CMT_CMD1_MB.
|
|
#define BS_CMT_CMD1_MB (8U) //!< Bit field size in bits for CMT_CMD1_MB.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CMD1_MB field.
|
|
#define BR_CMT_CMD1_MB (HW_CMT_CMD1.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CMD1_MB.
|
|
#define BF_CMT_CMD1_MB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD1_MB), uint8_t) & BM_CMT_CMD1_MB)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the MB field to a new value.
|
|
#define BW_CMT_CMD1_MB(v) (HW_CMT_CMD1_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CMD2 - CMT Modulator Data Register Mark Low
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CMD2 - CMT Modulator Data Register Mark Low (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* The contents of this register are transferred to the modulator down counter
|
|
* upon the completion of a modulation period.
|
|
*/
|
|
typedef union _hw_cmt_cmd2
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cmd2_bitfields
|
|
{
|
|
uint8_t MB : 8; //!< [7:0]
|
|
} B;
|
|
} hw_cmt_cmd2_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CMD2 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CMD2_ADDR (REGS_CMT_BASE + 0x7U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CMD2 (*(__IO hw_cmt_cmd2_t *) HW_CMT_CMD2_ADDR)
|
|
#define HW_CMT_CMD2_RD() (HW_CMT_CMD2.U)
|
|
#define HW_CMT_CMD2_WR(v) (HW_CMT_CMD2.U = (v))
|
|
#define HW_CMT_CMD2_SET(v) (HW_CMT_CMD2_WR(HW_CMT_CMD2_RD() | (v)))
|
|
#define HW_CMT_CMD2_CLR(v) (HW_CMT_CMD2_WR(HW_CMT_CMD2_RD() & ~(v)))
|
|
#define HW_CMT_CMD2_TOG(v) (HW_CMT_CMD2_WR(HW_CMT_CMD2_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CMD2 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CMD2, field MB[7:0] (RW)
|
|
*
|
|
* Controls the lower mark periods of the modulator for all modes.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CMD2_MB (0U) //!< Bit position for CMT_CMD2_MB.
|
|
#define BM_CMT_CMD2_MB (0xFFU) //!< Bit mask for CMT_CMD2_MB.
|
|
#define BS_CMT_CMD2_MB (8U) //!< Bit field size in bits for CMT_CMD2_MB.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CMD2_MB field.
|
|
#define BR_CMT_CMD2_MB (HW_CMT_CMD2.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CMD2_MB.
|
|
#define BF_CMT_CMD2_MB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD2_MB), uint8_t) & BM_CMT_CMD2_MB)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the MB field to a new value.
|
|
#define BW_CMT_CMD2_MB(v) (HW_CMT_CMD2_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CMD3 - CMT Modulator Data Register Space High
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CMD3 - CMT Modulator Data Register Space High (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* The contents of this register are transferred to the space period register
|
|
* upon the completion of a modulation period.
|
|
*/
|
|
typedef union _hw_cmt_cmd3
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cmd3_bitfields
|
|
{
|
|
uint8_t SB : 8; //!< [7:0]
|
|
} B;
|
|
} hw_cmt_cmd3_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CMD3 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CMD3_ADDR (REGS_CMT_BASE + 0x8U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CMD3 (*(__IO hw_cmt_cmd3_t *) HW_CMT_CMD3_ADDR)
|
|
#define HW_CMT_CMD3_RD() (HW_CMT_CMD3.U)
|
|
#define HW_CMT_CMD3_WR(v) (HW_CMT_CMD3.U = (v))
|
|
#define HW_CMT_CMD3_SET(v) (HW_CMT_CMD3_WR(HW_CMT_CMD3_RD() | (v)))
|
|
#define HW_CMT_CMD3_CLR(v) (HW_CMT_CMD3_WR(HW_CMT_CMD3_RD() & ~(v)))
|
|
#define HW_CMT_CMD3_TOG(v) (HW_CMT_CMD3_WR(HW_CMT_CMD3_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CMD3 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CMD3, field SB[7:0] (RW)
|
|
*
|
|
* Controls the upper space periods of the modulator for all modes.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CMD3_SB (0U) //!< Bit position for CMT_CMD3_SB.
|
|
#define BM_CMT_CMD3_SB (0xFFU) //!< Bit mask for CMT_CMD3_SB.
|
|
#define BS_CMT_CMD3_SB (8U) //!< Bit field size in bits for CMT_CMD3_SB.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CMD3_SB field.
|
|
#define BR_CMT_CMD3_SB (HW_CMT_CMD3.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CMD3_SB.
|
|
#define BF_CMT_CMD3_SB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD3_SB), uint8_t) & BM_CMT_CMD3_SB)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the SB field to a new value.
|
|
#define BW_CMT_CMD3_SB(v) (HW_CMT_CMD3_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_CMD4 - CMT Modulator Data Register Space Low
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_CMD4 - CMT Modulator Data Register Space Low (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* The contents of this register are transferred to the space period register
|
|
* upon the completion of a modulation period.
|
|
*/
|
|
typedef union _hw_cmt_cmd4
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_cmd4_bitfields
|
|
{
|
|
uint8_t SB : 8; //!< [7:0]
|
|
} B;
|
|
} hw_cmt_cmd4_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_CMD4 register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_CMD4_ADDR (REGS_CMT_BASE + 0x9U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_CMD4 (*(__IO hw_cmt_cmd4_t *) HW_CMT_CMD4_ADDR)
|
|
#define HW_CMT_CMD4_RD() (HW_CMT_CMD4.U)
|
|
#define HW_CMT_CMD4_WR(v) (HW_CMT_CMD4.U = (v))
|
|
#define HW_CMT_CMD4_SET(v) (HW_CMT_CMD4_WR(HW_CMT_CMD4_RD() | (v)))
|
|
#define HW_CMT_CMD4_CLR(v) (HW_CMT_CMD4_WR(HW_CMT_CMD4_RD() & ~(v)))
|
|
#define HW_CMT_CMD4_TOG(v) (HW_CMT_CMD4_WR(HW_CMT_CMD4_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_CMD4 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_CMD4, field SB[7:0] (RW)
|
|
*
|
|
* Controls the lower space periods of the modulator for all modes.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_CMD4_SB (0U) //!< Bit position for CMT_CMD4_SB.
|
|
#define BM_CMT_CMD4_SB (0xFFU) //!< Bit mask for CMT_CMD4_SB.
|
|
#define BS_CMT_CMD4_SB (8U) //!< Bit field size in bits for CMT_CMD4_SB.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_CMD4_SB field.
|
|
#define BR_CMT_CMD4_SB (HW_CMT_CMD4.U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_CMD4_SB.
|
|
#define BF_CMT_CMD4_SB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_CMD4_SB), uint8_t) & BM_CMT_CMD4_SB)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the SB field to a new value.
|
|
#define BW_CMT_CMD4_SB(v) (HW_CMT_CMD4_WR(v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_PPS - CMT Primary Prescaler Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_PPS - CMT Primary Prescaler Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This register is used to set the Primary Prescaler Divider field (PPSDIV).
|
|
*/
|
|
typedef union _hw_cmt_pps
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_pps_bitfields
|
|
{
|
|
uint8_t PPSDIV : 4; //!< [3:0] Primary Prescaler Divider
|
|
uint8_t RESERVED0 : 4; //!< [7:4]
|
|
} B;
|
|
} hw_cmt_pps_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_PPS register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_PPS_ADDR (REGS_CMT_BASE + 0xAU)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_PPS (*(__IO hw_cmt_pps_t *) HW_CMT_PPS_ADDR)
|
|
#define HW_CMT_PPS_RD() (HW_CMT_PPS.U)
|
|
#define HW_CMT_PPS_WR(v) (HW_CMT_PPS.U = (v))
|
|
#define HW_CMT_PPS_SET(v) (HW_CMT_PPS_WR(HW_CMT_PPS_RD() | (v)))
|
|
#define HW_CMT_PPS_CLR(v) (HW_CMT_PPS_WR(HW_CMT_PPS_RD() & ~(v)))
|
|
#define HW_CMT_PPS_TOG(v) (HW_CMT_PPS_WR(HW_CMT_PPS_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_PPS bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_PPS, field PPSDIV[3:0] (RW)
|
|
*
|
|
* Divides the CMT clock to generate the Intermediate Frequency clock enable to
|
|
* the secondary prescaler.
|
|
*
|
|
* Values:
|
|
* - 0000 - Bus clock * 1
|
|
* - 0001 - Bus clock * 2
|
|
* - 0010 - Bus clock * 3
|
|
* - 0011 - Bus clock * 4
|
|
* - 0100 - Bus clock * 5
|
|
* - 0101 - Bus clock * 6
|
|
* - 0110 - Bus clock * 7
|
|
* - 0111 - Bus clock * 8
|
|
* - 1000 - Bus clock * 9
|
|
* - 1001 - Bus clock * 10
|
|
* - 1010 - Bus clock * 11
|
|
* - 1011 - Bus clock * 12
|
|
* - 1100 - Bus clock * 13
|
|
* - 1101 - Bus clock * 14
|
|
* - 1110 - Bus clock * 15
|
|
* - 1111 - Bus clock * 16
|
|
*/
|
|
//@{
|
|
#define BP_CMT_PPS_PPSDIV (0U) //!< Bit position for CMT_PPS_PPSDIV.
|
|
#define BM_CMT_PPS_PPSDIV (0x0FU) //!< Bit mask for CMT_PPS_PPSDIV.
|
|
#define BS_CMT_PPS_PPSDIV (4U) //!< Bit field size in bits for CMT_PPS_PPSDIV.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_PPS_PPSDIV field.
|
|
#define BR_CMT_PPS_PPSDIV (HW_CMT_PPS.B.PPSDIV)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_PPS_PPSDIV.
|
|
#define BF_CMT_PPS_PPSDIV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_PPS_PPSDIV), uint8_t) & BM_CMT_PPS_PPSDIV)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the PPSDIV field to a new value.
|
|
#define BW_CMT_PPS_PPSDIV(v) (HW_CMT_PPS_WR((HW_CMT_PPS_RD() & ~BM_CMT_PPS_PPSDIV) | BF_CMT_PPS_PPSDIV(v)))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMT_DMA - CMT Direct Memory Access Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMT_DMA - CMT Direct Memory Access Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*
|
|
* This register is used to enable/disable direct memory access (DMA).
|
|
*/
|
|
typedef union _hw_cmt_dma
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmt_dma_bitfields
|
|
{
|
|
uint8_t DMAb : 1; //!< [0] DMA Enable
|
|
uint8_t RESERVED0 : 7; //!< [7:1]
|
|
} B;
|
|
} hw_cmt_dma_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMT_DMA register
|
|
*/
|
|
//@{
|
|
#define HW_CMT_DMA_ADDR (REGS_CMT_BASE + 0xBU)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMT_DMA (*(__IO hw_cmt_dma_t *) HW_CMT_DMA_ADDR)
|
|
#define HW_CMT_DMA_RD() (HW_CMT_DMA.U)
|
|
#define HW_CMT_DMA_WR(v) (HW_CMT_DMA.U = (v))
|
|
#define HW_CMT_DMA_SET(v) (HW_CMT_DMA_WR(HW_CMT_DMA_RD() | (v)))
|
|
#define HW_CMT_DMA_CLR(v) (HW_CMT_DMA_WR(HW_CMT_DMA_RD() & ~(v)))
|
|
#define HW_CMT_DMA_TOG(v) (HW_CMT_DMA_WR(HW_CMT_DMA_RD() ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMT_DMA bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMT_DMA, field DMA[0] (RW)
|
|
*
|
|
* Enables the DMA protocol.
|
|
*
|
|
* Values:
|
|
* - 0 - DMA transfer request and done are disabled.
|
|
* - 1 - DMA transfer request and done are enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMT_DMA_DMA (0U) //!< Bit position for CMT_DMA_DMA.
|
|
#define BM_CMT_DMA_DMA (0x01U) //!< Bit mask for CMT_DMA_DMA.
|
|
#define BS_CMT_DMA_DMA (1U) //!< Bit field size in bits for CMT_DMA_DMA.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMT_DMA_DMA field.
|
|
#define BR_CMT_DMA_DMA (BITBAND_ACCESS8(HW_CMT_DMA_ADDR, BP_CMT_DMA_DMA))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMT_DMA_DMA.
|
|
#define BF_CMT_DMA_DMA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMT_DMA_DMA), uint8_t) & BM_CMT_DMA_DMA)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the DMA field to a new value.
|
|
#define BW_CMT_DMA_DMA(v) (BITBAND_ACCESS8(HW_CMT_DMA_ADDR, BP_CMT_DMA_DMA) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// hw_cmt_t - module struct
|
|
//-------------------------------------------------------------------------------------------
|
|
/*!
|
|
* @brief All CMT module registers.
|
|
*/
|
|
#ifndef __LANGUAGE_ASM__
|
|
#pragma pack(1)
|
|
typedef struct _hw_cmt
|
|
{
|
|
__IO hw_cmt_cgh1_t CGH1; //!< [0x0] CMT Carrier Generator High Data Register 1
|
|
__IO hw_cmt_cgl1_t CGL1; //!< [0x1] CMT Carrier Generator Low Data Register 1
|
|
__IO hw_cmt_cgh2_t CGH2; //!< [0x2] CMT Carrier Generator High Data Register 2
|
|
__IO hw_cmt_cgl2_t CGL2; //!< [0x3] CMT Carrier Generator Low Data Register 2
|
|
__IO hw_cmt_oc_t OC; //!< [0x4] CMT Output Control Register
|
|
__IO hw_cmt_msc_t MSC; //!< [0x5] CMT Modulator Status and Control Register
|
|
__IO hw_cmt_cmd1_t CMD1; //!< [0x6] CMT Modulator Data Register Mark High
|
|
__IO hw_cmt_cmd2_t CMD2; //!< [0x7] CMT Modulator Data Register Mark Low
|
|
__IO hw_cmt_cmd3_t CMD3; //!< [0x8] CMT Modulator Data Register Space High
|
|
__IO hw_cmt_cmd4_t CMD4; //!< [0x9] CMT Modulator Data Register Space Low
|
|
__IO hw_cmt_pps_t PPS; //!< [0xA] CMT Primary Prescaler Register
|
|
__IO hw_cmt_dma_t DMA; //!< [0xB] CMT Direct Memory Access Register
|
|
} hw_cmt_t;
|
|
#pragma pack()
|
|
|
|
//! @brief Macro to access all CMT registers.
|
|
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
|
|
//! use the '&' operator, like <code>&HW_CMT</code>.
|
|
#define HW_CMT (*(hw_cmt_t *) REGS_CMT_BASE)
|
|
#endif
|
|
|
|
#endif // __HW_CMT_REGISTERS_H__
|
|
// v22/130726/0.9
|
|
// EOF
|