704 lines
27 KiB
C
704 lines
27 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _FSL_FLEXIO_SPI_H_
|
|
#define _FSL_FLEXIO_SPI_H_
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_flexio.h"
|
|
|
|
/*!
|
|
* @addtogroup flexio_spi
|
|
* @{
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief FlexIO SPI driver version 2.1.1. */
|
|
#define FSL_FLEXIO_SPI_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))
|
|
/*@}*/
|
|
|
|
#ifndef FLEXIO_SPI_DUMMYDATA
|
|
/*! @brief FlexIO SPI dummy transfer data, the data is sent while txData is NULL. */
|
|
#define FLEXIO_SPI_DUMMYDATA (0xFFFFU)
|
|
#endif
|
|
|
|
/*! @brief Error codes for the FlexIO SPI driver. */
|
|
enum _flexio_spi_status
|
|
{
|
|
kStatus_FLEXIO_SPI_Busy = MAKE_STATUS(kStatusGroup_FLEXIO_SPI, 1), /*!< FlexIO SPI is busy. */
|
|
kStatus_FLEXIO_SPI_Idle = MAKE_STATUS(kStatusGroup_FLEXIO_SPI, 2), /*!< SPI is idle */
|
|
kStatus_FLEXIO_SPI_Error = MAKE_STATUS(kStatusGroup_FLEXIO_SPI, 3), /*!< FlexIO SPI error. */
|
|
};
|
|
|
|
/*! @brief FlexIO SPI clock phase configuration. */
|
|
typedef enum _flexio_spi_clock_phase
|
|
{
|
|
kFLEXIO_SPI_ClockPhaseFirstEdge = 0x0U, /*!< First edge on SPSCK occurs at the middle of the first
|
|
* cycle of a data transfer. */
|
|
kFLEXIO_SPI_ClockPhaseSecondEdge = 0x1U, /*!< First edge on SPSCK occurs at the start of the
|
|
* first cycle of a data transfer. */
|
|
} flexio_spi_clock_phase_t;
|
|
|
|
/*! @brief FlexIO SPI data shifter direction options. */
|
|
typedef enum _flexio_spi_shift_direction
|
|
{
|
|
kFLEXIO_SPI_MsbFirst = 0, /*!< Data transfers start with most significant bit. */
|
|
kFLEXIO_SPI_LsbFirst = 1, /*!< Data transfers start with least significant bit. */
|
|
} flexio_spi_shift_direction_t;
|
|
|
|
/*! @brief FlexIO SPI data length mode options. */
|
|
typedef enum _flexio_spi_data_bitcount_mode
|
|
{
|
|
kFLEXIO_SPI_8BitMode = 0x08U, /*!< 8-bit data transmission mode. */
|
|
kFLEXIO_SPI_16BitMode = 0x10U, /*!< 16-bit data transmission mode. */
|
|
} flexio_spi_data_bitcount_mode_t;
|
|
|
|
/*! @brief Define FlexIO SPI interrupt mask. */
|
|
enum _flexio_spi_interrupt_enable
|
|
{
|
|
kFLEXIO_SPI_TxEmptyInterruptEnable = 0x1U, /*!< Transmit buffer empty interrupt enable. */
|
|
kFLEXIO_SPI_RxFullInterruptEnable = 0x2U, /*!< Receive buffer full interrupt enable. */
|
|
};
|
|
|
|
/*! @brief Define FlexIO SPI status mask. */
|
|
enum _flexio_spi_status_flags
|
|
{
|
|
kFLEXIO_SPI_TxBufferEmptyFlag = 0x1U, /*!< Transmit buffer empty flag. */
|
|
kFLEXIO_SPI_RxBufferFullFlag = 0x2U, /*!< Receive buffer full flag. */
|
|
};
|
|
|
|
/*! @brief Define FlexIO SPI DMA mask. */
|
|
enum _flexio_spi_dma_enable
|
|
{
|
|
kFLEXIO_SPI_TxDmaEnable = 0x1U, /*!< Tx DMA request source */
|
|
kFLEXIO_SPI_RxDmaEnable = 0x2U, /*!< Rx DMA request source */
|
|
kFLEXIO_SPI_DmaAllEnable = 0x3U, /*!< All DMA request source*/
|
|
};
|
|
|
|
/*! @brief Define FlexIO SPI transfer flags. */
|
|
enum _flexio_spi_transfer_flags
|
|
{
|
|
kFLEXIO_SPI_8bitMsb = 0x1U, /*!< FlexIO SPI 8-bit MSB first */
|
|
kFLEXIO_SPI_8bitLsb = 0x2U, /*!< FlexIO SPI 8-bit LSB first */
|
|
kFLEXIO_SPI_16bitMsb = 0x9U, /*!< FlexIO SPI 16-bit MSB first */
|
|
kFLEXIO_SPI_16bitLsb = 0xaU, /*!< FlexIO SPI 16-bit LSB first */
|
|
};
|
|
|
|
/*! @brief Define FlexIO SPI access structure typedef. */
|
|
typedef struct _flexio_spi_type
|
|
{
|
|
FLEXIO_Type *flexioBase; /*!< FlexIO base pointer. */
|
|
uint8_t SDOPinIndex; /*!< Pin select for data output. */
|
|
uint8_t SDIPinIndex; /*!< Pin select for data input. */
|
|
uint8_t SCKPinIndex; /*!< Pin select for clock. */
|
|
uint8_t CSnPinIndex; /*!< Pin select for enable. */
|
|
uint8_t shifterIndex[2]; /*!< Shifter index used in FlexIO SPI. */
|
|
uint8_t timerIndex[2]; /*!< Timer index used in FlexIO SPI. */
|
|
} FLEXIO_SPI_Type;
|
|
|
|
/*! @brief Define FlexIO SPI master configuration structure. */
|
|
typedef struct _flexio_spi_master_config
|
|
{
|
|
bool enableMaster; /*!< Enable/disable FlexIO SPI master after configuration. */
|
|
bool enableInDoze; /*!< Enable/disable FlexIO operation in doze mode. */
|
|
bool enableInDebug; /*!< Enable/disable FlexIO operation in debug mode. */
|
|
bool enableFastAccess; /*!< Enable/disable fast access to FlexIO registers,
|
|
fast access requires the FlexIO clock to be at least
|
|
twice the frequency of the bus clock. */
|
|
uint32_t baudRate_Bps; /*!< Baud rate in Bps. */
|
|
flexio_spi_clock_phase_t phase; /*!< Clock phase. */
|
|
flexio_spi_data_bitcount_mode_t dataMode; /*!< 8bit or 16bit mode. */
|
|
} flexio_spi_master_config_t;
|
|
|
|
/*! @brief Define FlexIO SPI slave configuration structure. */
|
|
typedef struct _flexio_spi_slave_config
|
|
{
|
|
bool enableSlave; /*!< Enable/disable FlexIO SPI slave after configuration. */
|
|
bool enableInDoze; /*!< Enable/disable FlexIO operation in doze mode. */
|
|
bool enableInDebug; /*!< Enable/disable FlexIO operation in debug mode. */
|
|
bool enableFastAccess; /*!< Enable/disable fast access to FlexIO registers,
|
|
fast access requires the FlexIO clock to be at least
|
|
twice the frequency of the bus clock. */
|
|
flexio_spi_clock_phase_t phase; /*!< Clock phase. */
|
|
flexio_spi_data_bitcount_mode_t dataMode; /*!< 8bit or 16bit mode. */
|
|
} flexio_spi_slave_config_t;
|
|
|
|
/*! @brief Define FlexIO SPI transfer structure. */
|
|
typedef struct _flexio_spi_transfer
|
|
{
|
|
uint8_t *txData; /*!< Send buffer. */
|
|
uint8_t *rxData; /*!< Receive buffer. */
|
|
size_t dataSize; /*!< Transfer bytes. */
|
|
uint8_t flags; /*!< FlexIO SPI control flag, MSB first or LSB first. */
|
|
} flexio_spi_transfer_t;
|
|
|
|
/*! @brief typedef for flexio_spi_master_handle_t in advance. */
|
|
typedef struct _flexio_spi_master_handle flexio_spi_master_handle_t;
|
|
|
|
/*! @brief Slave handle is the same with master handle. */
|
|
typedef flexio_spi_master_handle_t flexio_spi_slave_handle_t;
|
|
|
|
/*! @brief FlexIO SPI master callback for finished transmit */
|
|
typedef void (*flexio_spi_master_transfer_callback_t)(FLEXIO_SPI_Type *base,
|
|
flexio_spi_master_handle_t *handle,
|
|
status_t status,
|
|
void *userData);
|
|
|
|
/*! @brief FlexIO SPI slave callback for finished transmit */
|
|
typedef void (*flexio_spi_slave_transfer_callback_t)(FLEXIO_SPI_Type *base,
|
|
flexio_spi_slave_handle_t *handle,
|
|
status_t status,
|
|
void *userData);
|
|
|
|
/*! @brief Define FlexIO SPI handle structure. */
|
|
struct _flexio_spi_master_handle
|
|
{
|
|
uint8_t *txData; /*!< Transfer buffer. */
|
|
uint8_t *rxData; /*!< Receive buffer. */
|
|
size_t transferSize; /*!< Total bytes to be transferred. */
|
|
volatile size_t txRemainingBytes; /*!< Send data remaining in bytes. */
|
|
volatile size_t rxRemainingBytes; /*!< Receive data remaining in bytes. */
|
|
volatile uint32_t state; /*!< FlexIO SPI internal state. */
|
|
uint8_t bytePerFrame; /*!< SPI mode, 2bytes or 1byte in a frame */
|
|
flexio_spi_shift_direction_t direction; /*!< Shift direction. */
|
|
flexio_spi_master_transfer_callback_t callback; /*!< FlexIO SPI callback. */
|
|
void *userData; /*!< Callback parameter. */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif /*_cplusplus*/
|
|
|
|
/*!
|
|
* @name FlexIO SPI Configuration
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO SPI master hardware,
|
|
* and configures the FlexIO SPI with FlexIO SPI master configuration. The
|
|
* configuration structure can be filled by the user, or be set with default values
|
|
* by the FLEXIO_SPI_MasterGetDefaultConfig().
|
|
*
|
|
* @note FlexIO SPI master only support CPOL = 0, which means clock inactive low.
|
|
*
|
|
* Example
|
|
@code
|
|
FLEXIO_SPI_Type spiDev = {
|
|
.flexioBase = FLEXIO,
|
|
.SDOPinIndex = 0,
|
|
.SDIPinIndex = 1,
|
|
.SCKPinIndex = 2,
|
|
.CSnPinIndex = 3,
|
|
.shifterIndex = {0,1},
|
|
.timerIndex = {0,1}
|
|
};
|
|
flexio_spi_master_config_t config = {
|
|
.enableMaster = true,
|
|
.enableInDoze = false,
|
|
.enableInDebug = true,
|
|
.enableFastAccess = false,
|
|
.baudRate_Bps = 500000,
|
|
.phase = kFLEXIO_SPI_ClockPhaseFirstEdge,
|
|
.direction = kFLEXIO_SPI_MsbFirst,
|
|
.dataMode = kFLEXIO_SPI_8BitMode
|
|
};
|
|
FLEXIO_SPI_MasterInit(&spiDev, &config, srcClock_Hz);
|
|
@endcode
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param masterConfig Pointer to the flexio_spi_master_config_t structure.
|
|
* @param srcClock_Hz FlexIO source clock in Hz.
|
|
*/
|
|
void FLEXIO_SPI_MasterInit(FLEXIO_SPI_Type *base, flexio_spi_master_config_t *masterConfig, uint32_t srcClock_Hz);
|
|
|
|
/*!
|
|
* @brief Resets the FlexIO SPI timer and shifter config.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type.
|
|
*/
|
|
void FLEXIO_SPI_MasterDeinit(FLEXIO_SPI_Type *base);
|
|
|
|
/*!
|
|
* @brief Gets the default configuration to configure the FlexIO SPI master. The configuration
|
|
* can be used directly by calling the FLEXIO_SPI_MasterConfigure().
|
|
* Example:
|
|
@code
|
|
flexio_spi_master_config_t masterConfig;
|
|
FLEXIO_SPI_MasterGetDefaultConfig(&masterConfig);
|
|
@endcode
|
|
* @param masterConfig Pointer to the flexio_spi_master_config_t structure.
|
|
*/
|
|
void FLEXIO_SPI_MasterGetDefaultConfig(flexio_spi_master_config_t *masterConfig);
|
|
|
|
/*!
|
|
* @brief Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO SPI slave hardware
|
|
* configuration, and configures the FlexIO SPI with FlexIO SPI slave configuration. The
|
|
* configuration structure can be filled by the user, or be set with default values
|
|
* by the FLEXIO_SPI_SlaveGetDefaultConfig().
|
|
*
|
|
* @note Only one timer is needed in the FlexIO SPI slave. As a result, the second timer index is ignored.
|
|
* FlexIO SPI slave only support CPOL = 0, which means clock inactive low.
|
|
* Example
|
|
@code
|
|
FLEXIO_SPI_Type spiDev = {
|
|
.flexioBase = FLEXIO,
|
|
.SDOPinIndex = 0,
|
|
.SDIPinIndex = 1,
|
|
.SCKPinIndex = 2,
|
|
.CSnPinIndex = 3,
|
|
.shifterIndex = {0,1},
|
|
.timerIndex = {0}
|
|
};
|
|
flexio_spi_slave_config_t config = {
|
|
.enableSlave = true,
|
|
.enableInDoze = false,
|
|
.enableInDebug = true,
|
|
.enableFastAccess = false,
|
|
.phase = kFLEXIO_SPI_ClockPhaseFirstEdge,
|
|
.direction = kFLEXIO_SPI_MsbFirst,
|
|
.dataMode = kFLEXIO_SPI_8BitMode
|
|
};
|
|
FLEXIO_SPI_SlaveInit(&spiDev, &config);
|
|
@endcode
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param slaveConfig Pointer to the flexio_spi_slave_config_t structure.
|
|
*/
|
|
void FLEXIO_SPI_SlaveInit(FLEXIO_SPI_Type *base, flexio_spi_slave_config_t *slaveConfig);
|
|
|
|
/*!
|
|
* @brief Gates the FlexIO clock.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type.
|
|
*/
|
|
void FLEXIO_SPI_SlaveDeinit(FLEXIO_SPI_Type *base);
|
|
|
|
/*!
|
|
* @brief Gets the default configuration to configure the FlexIO SPI slave. The configuration
|
|
* can be used directly for calling the FLEXIO_SPI_SlaveConfigure().
|
|
* Example:
|
|
@code
|
|
flexio_spi_slave_config_t slaveConfig;
|
|
FLEXIO_SPI_SlaveGetDefaultConfig(&slaveConfig);
|
|
@endcode
|
|
* @param slaveConfig Pointer to the flexio_spi_slave_config_t structure.
|
|
*/
|
|
void FLEXIO_SPI_SlaveGetDefaultConfig(flexio_spi_slave_config_t *slaveConfig);
|
|
|
|
/*@}*/
|
|
|
|
/*!
|
|
* @name Status
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets FlexIO SPI status flags.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @return status flag; Use the status flag to AND the following flag mask and get the status.
|
|
* @arg kFLEXIO_SPI_TxEmptyFlag
|
|
* @arg kFLEXIO_SPI_RxEmptyFlag
|
|
*/
|
|
|
|
uint32_t FLEXIO_SPI_GetStatusFlags(FLEXIO_SPI_Type *base);
|
|
|
|
/*!
|
|
* @brief Clears FlexIO SPI status flags.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param mask status flag
|
|
* The parameter can be any combination of the following values:
|
|
* @arg kFLEXIO_SPI_TxEmptyFlag
|
|
* @arg kFLEXIO_SPI_RxEmptyFlag
|
|
*/
|
|
|
|
void FLEXIO_SPI_ClearStatusFlags(FLEXIO_SPI_Type *base, uint32_t mask);
|
|
|
|
/*@}*/
|
|
|
|
/*!
|
|
* @name Interrupts
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables the FlexIO SPI interrupt.
|
|
*
|
|
* This function enables the FlexIO SPI interrupt.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param mask interrupt source. The parameter can be any combination of the following values:
|
|
* @arg kFLEXIO_SPI_RxFullInterruptEnable
|
|
* @arg kFLEXIO_SPI_TxEmptyInterruptEnable
|
|
*/
|
|
void FLEXIO_SPI_EnableInterrupts(FLEXIO_SPI_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Disables the FlexIO SPI interrupt.
|
|
*
|
|
* This function disables the FlexIO SPI interrupt.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param mask interrupt source The parameter can be any combination of the following values:
|
|
* @arg kFLEXIO_SPI_RxFullInterruptEnable
|
|
* @arg kFLEXIO_SPI_TxEmptyInterruptEnable
|
|
*/
|
|
void FLEXIO_SPI_DisableInterrupts(FLEXIO_SPI_Type *base, uint32_t mask);
|
|
|
|
/*@}*/
|
|
|
|
/*!
|
|
* @name DMA Control
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables/disables the FlexIO SPI transmit DMA. This function enables/disables the FlexIO SPI Tx DMA,
|
|
* which means that asserting the kFLEXIO_SPI_TxEmptyFlag does/doesn't trigger the DMA request.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param mask SPI DMA source.
|
|
* @param enable True means enable DMA, false means disable DMA.
|
|
*/
|
|
void FLEXIO_SPI_EnableDMA(FLEXIO_SPI_Type *base, uint32_t mask, bool enable);
|
|
|
|
/*!
|
|
* @brief Gets the FlexIO SPI transmit data register address for MSB first transfer.
|
|
*
|
|
* This function returns the SPI data register address, which is mainly used by DMA/eDMA.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
* @return FlexIO SPI transmit data register address.
|
|
*/
|
|
static inline uint32_t FLEXIO_SPI_GetTxDataRegisterAddress(FLEXIO_SPI_Type *base,
|
|
flexio_spi_shift_direction_t direction)
|
|
{
|
|
if (direction == kFLEXIO_SPI_MsbFirst)
|
|
{
|
|
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferBitSwapped,
|
|
base->shifterIndex[0]) +
|
|
3U;
|
|
}
|
|
else
|
|
{
|
|
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBuffer, base->shifterIndex[0]);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the FlexIO SPI receive data register address for the MSB first transfer.
|
|
*
|
|
* This function returns the SPI data register address, which is mainly used by DMA/eDMA.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
* @return FlexIO SPI receive data register address.
|
|
*/
|
|
static inline uint32_t FLEXIO_SPI_GetRxDataRegisterAddress(FLEXIO_SPI_Type *base,
|
|
flexio_spi_shift_direction_t direction)
|
|
{
|
|
if (direction == kFLEXIO_SPI_MsbFirst)
|
|
{
|
|
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferBitSwapped, base->shifterIndex[1]);
|
|
}
|
|
else
|
|
{
|
|
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBuffer, base->shifterIndex[1]) + 3U;
|
|
}
|
|
}
|
|
|
|
/*@}*/
|
|
|
|
/*!
|
|
* @name Bus Operations
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables/disables the FlexIO SPI module operation.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type.
|
|
* @param enable True to enable, false does not have any effect.
|
|
*/
|
|
static inline void FLEXIO_SPI_Enable(FLEXIO_SPI_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->flexioBase->CTRL |= FLEXIO_CTRL_FLEXEN_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets baud rate for the FlexIO SPI transfer, which is only used for the master.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param baudRate_Bps Baud Rate needed in Hz.
|
|
* @param srcClockHz SPI source clock frequency in Hz.
|
|
*/
|
|
void FLEXIO_SPI_MasterSetBaudRate(FLEXIO_SPI_Type *base, uint32_t baudRate_Bps, uint32_t srcClockHz);
|
|
|
|
/*!
|
|
* @brief Writes one byte of data, which is sent using the MSB method.
|
|
*
|
|
* @note This is a non-blocking API, which returns directly after the data is put into the
|
|
* data register but the data transfer is not finished on the bus. Ensure that
|
|
* the TxEmptyFlag is asserted before calling this API.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
* @param data 8 bit/16 bit data.
|
|
*/
|
|
static inline void FLEXIO_SPI_WriteData(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction, uint16_t data)
|
|
{
|
|
if (direction == kFLEXIO_SPI_MsbFirst)
|
|
{
|
|
base->flexioBase->SHIFTBUFBBS[base->shifterIndex[0]] = data;
|
|
}
|
|
else
|
|
{
|
|
base->flexioBase->SHIFTBUF[base->shifterIndex[0]] = data;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Reads 8 bit/16 bit data.
|
|
*
|
|
* @note This is a non-blocking API, which returns directly after the data is read from the
|
|
* data register. Ensure that the RxFullFlag is asserted before calling this API.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
* @return 8 bit/16 bit data received.
|
|
*/
|
|
static inline uint16_t FLEXIO_SPI_ReadData(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction)
|
|
{
|
|
if (direction == kFLEXIO_SPI_MsbFirst)
|
|
{
|
|
return base->flexioBase->SHIFTBUFBIS[base->shifterIndex[1]];
|
|
}
|
|
else
|
|
{
|
|
return base->flexioBase->SHIFTBUFBYS[base->shifterIndex[1]];
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Sends a buffer of data bytes.
|
|
*
|
|
* @note This function blocks using the polling method until all bytes have been sent.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
* @param buffer The data bytes to send.
|
|
* @param size The number of data bytes to send.
|
|
*/
|
|
void FLEXIO_SPI_WriteBlocking(FLEXIO_SPI_Type *base,
|
|
flexio_spi_shift_direction_t direction,
|
|
const uint8_t *buffer,
|
|
size_t size);
|
|
|
|
/*!
|
|
* @brief Receives a buffer of bytes.
|
|
*
|
|
* @note This function blocks using the polling method until all bytes have been received.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
* @param buffer The buffer to store the received bytes.
|
|
* @param size The number of data bytes to be received.
|
|
* @param direction Shift direction of MSB first or LSB first.
|
|
*/
|
|
void FLEXIO_SPI_ReadBlocking(FLEXIO_SPI_Type *base,
|
|
flexio_spi_shift_direction_t direction,
|
|
uint8_t *buffer,
|
|
size_t size);
|
|
|
|
/*!
|
|
* @brief Receives a buffer of bytes.
|
|
*
|
|
* @note This function blocks via polling until all bytes have been received.
|
|
*
|
|
* @param base pointer to FLEXIO_SPI_Type structure
|
|
* @param xfer FlexIO SPI transfer structure, see #flexio_spi_transfer_t.
|
|
*/
|
|
void FLEXIO_SPI_MasterTransferBlocking(FLEXIO_SPI_Type *base, flexio_spi_transfer_t *xfer);
|
|
|
|
/*Transactional APIs*/
|
|
|
|
/*!
|
|
* @name Transactional
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initializes the FlexIO SPI Master handle, which is used in transactional functions.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
|
|
* @param callback The callback function.
|
|
* @param userData The parameter of the callback function.
|
|
* @retval kStatus_Success Successfully create the handle.
|
|
* @retval kStatus_OutOfRange The FlexIO type/handle/ISR table out of range.
|
|
*/
|
|
status_t FLEXIO_SPI_MasterTransferCreateHandle(FLEXIO_SPI_Type *base,
|
|
flexio_spi_master_handle_t *handle,
|
|
flexio_spi_master_transfer_callback_t callback,
|
|
void *userData);
|
|
|
|
/*!
|
|
* @brief Master transfer data using IRQ.
|
|
*
|
|
* This function sends data using IRQ. This is a non-blocking function, which returns
|
|
* right away. When all data is sent out/received, the callback function is called.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
|
|
* @param xfer FlexIO SPI transfer structure. See #flexio_spi_transfer_t.
|
|
* @retval kStatus_Success Successfully start a transfer.
|
|
* @retval kStatus_InvalidArgument Input argument is invalid.
|
|
* @retval kStatus_FLEXIO_SPI_Busy SPI is not idle, is running another transfer.
|
|
*/
|
|
status_t FLEXIO_SPI_MasterTransferNonBlocking(FLEXIO_SPI_Type *base,
|
|
flexio_spi_master_handle_t *handle,
|
|
flexio_spi_transfer_t *xfer);
|
|
|
|
/*!
|
|
* @brief Aborts the master data transfer, which used IRQ.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_SPI_MasterTransferAbort(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle);
|
|
|
|
/*!
|
|
* @brief Gets the data transfer status which used IRQ.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
|
|
* @param count Number of bytes transferred so far by the non-blocking transaction.
|
|
* @retval kStatus_InvalidArgument count is Invalid.
|
|
* @retval kStatus_Success Successfully return the count.
|
|
*/
|
|
status_t FLEXIO_SPI_MasterTransferGetCount(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle, size_t *count);
|
|
|
|
/*!
|
|
* @brief FlexIO SPI master IRQ handler function.
|
|
*
|
|
* @param spiType Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param spiHandle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_SPI_MasterTransferHandleIRQ(void *spiType, void *spiHandle);
|
|
|
|
/*!
|
|
* @brief Initializes the FlexIO SPI Slave handle, which is used in transactional functions.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
|
|
* @param callback The callback function.
|
|
* @param userData The parameter of the callback function.
|
|
* @retval kStatus_Success Successfully create the handle.
|
|
* @retval kStatus_OutOfRange The FlexIO type/handle/ISR table out of range.
|
|
*/
|
|
status_t FLEXIO_SPI_SlaveTransferCreateHandle(FLEXIO_SPI_Type *base,
|
|
flexio_spi_slave_handle_t *handle,
|
|
flexio_spi_slave_transfer_callback_t callback,
|
|
void *userData);
|
|
|
|
/*!
|
|
* @brief Slave transfer data using IRQ.
|
|
*
|
|
* This function sends data using IRQ. This is a non-blocking function, which returns
|
|
* right away. When all data is sent out/received, the callback function is called.
|
|
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param xfer FlexIO SPI transfer structure. See #flexio_spi_transfer_t.
|
|
* @retval kStatus_Success Successfully start a transfer.
|
|
* @retval kStatus_InvalidArgument Input argument is invalid.
|
|
* @retval kStatus_FLEXIO_SPI_Busy SPI is not idle; it is running another transfer.
|
|
*/
|
|
status_t FLEXIO_SPI_SlaveTransferNonBlocking(FLEXIO_SPI_Type *base,
|
|
flexio_spi_slave_handle_t *handle,
|
|
flexio_spi_transfer_t *xfer);
|
|
|
|
/*!
|
|
* @brief Aborts the slave data transfer which used IRQ, share same API with master.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
|
|
*/
|
|
static inline void FLEXIO_SPI_SlaveTransferAbort(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle)
|
|
{
|
|
FLEXIO_SPI_MasterTransferAbort(base, handle);
|
|
}
|
|
/*!
|
|
* @brief Gets the data transfer status which used IRQ, share same API with master.
|
|
*
|
|
* @param base Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
|
|
* @param count Number of bytes transferred so far by the non-blocking transaction.
|
|
* @retval kStatus_InvalidArgument count is Invalid.
|
|
* @retval kStatus_Success Successfully return the count.
|
|
*/
|
|
static inline status_t FLEXIO_SPI_SlaveTransferGetCount(FLEXIO_SPI_Type *base,
|
|
flexio_spi_slave_handle_t *handle,
|
|
size_t *count)
|
|
{
|
|
return FLEXIO_SPI_MasterTransferGetCount(base, handle, count);
|
|
}
|
|
|
|
/*!
|
|
* @brief FlexIO SPI slave IRQ handler function.
|
|
*
|
|
* @param spiType Pointer to the FLEXIO_SPI_Type structure.
|
|
* @param spiHandle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_SPI_SlaveTransferHandleIRQ(void *spiType, void *spiHandle);
|
|
|
|
/*@}*/
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif /*_cplusplus*/
|
|
/*@}*/
|
|
|
|
#endif /*_FSL_FLEXIO_SPI_H_*/
|