chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/imxrt1052-evk/Libraries/system_MIMXRT1052.c

198 lines
7.5 KiB
C
Raw Blame History

/*
** ###################################################################
** Processors: MIMXRT1052CVL5A
** MIMXRT1052DVL6A
**
** Compilers: Keil ARM C/C++ Compiler
** Freescale C/C++ for Embedded ARM
** GNU C Compiler
** IAR ANSI C/C++ Compiler for ARM
** MCUXpresso Compiler
**
** Reference manual: IMXRT1050RM Rev.C, 08/2017
** Version: rev. 0.1, 2017-01-10
** Build: b170927
**
** Abstract:
** Provides a system configuration function and a global variable that
** contains the system frequency. It configures the device and initializes
** the oscillator (PLL) that is part of the microcontroller device.
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2017 NXP
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
**
** 1. Redistributions of source code must retain the above copyright notice, this list
** of conditions and the following disclaimer.
**
** 2. Redistributions in binary form must reproduce the above copyright notice, this
** list of conditions and the following disclaimer in the documentation and/or
** other materials provided with the distribution.
**
** 3. Neither the name of the copyright holder nor the names of its
** contributors may be used to endorse or promote products derived from this
** software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 0.1 (2017-01-10)
** Initial version.
**
** ###################################################################
*/
/*!
* @file MIMXRT1052
* @version 0.1
* @date 2017-01-10
* @brief Device specific configuration file for MIMXRT1052 (implementation file)
*
* Provides a system configuration function and a global variable that contains
* the system frequency. It configures the device and initializes the oscillator
* (PLL) that is part of the microcontroller device.
*/
#include <stdint.h>
#include "fsl_device_registers.h"
/* ----------------------------------------------------------------------------
-- Core clock
---------------------------------------------------------------------------- */
uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK;
/* ----------------------------------------------------------------------------
-- SystemInit()
---------------------------------------------------------------------------- */
void SystemInit (void) {
#if ((__FPU_PRESENT == 1) && (__FPU_USED == 1))
SCB->CPACR |= ((3UL << 10*2) | (3UL << 11*2)); /* set CP10, CP11 Full Access */
#endif /* ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) */
/* Watchdog disable */
#if (DISABLE_WDOG)
if (WDOG1->WCR & WDOG_WCR_WDE_MASK)
{
WDOG1->WCR &= ~WDOG_WCR_WDE_MASK;
}
if (WDOG2->WCR & WDOG_WCR_WDE_MASK)
{
WDOG2->WCR &= ~WDOG_WCR_WDE_MASK;
}
RTWDOG->CNT = 0xD928C520U; /* 0xD928C520U is the update key */
RTWDOG->TOVAL = 0xFFFF;
RTWDOG->CS = (uint32_t) ((RTWDOG->CS) & ~RTWDOG_CS_EN_MASK) | RTWDOG_CS_UPDATE_MASK;
#endif /* (DISABLE_WDOG) */
/* Disable Systick which might be enabled by bootrom */
if (SysTick->CTRL & SysTick_CTRL_ENABLE_Msk)
{
SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
}
/* Enable instruction and data caches */
#if defined(__ICACHE_PRESENT) && __ICACHE_PRESENT
SCB_EnableICache();
#endif
#if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT
SCB_EnableDCache();
#endif
extern void rt_lowlevel_init(void);
rt_lowlevel_init();
}
/* ----------------------------------------------------------------------------
-- SystemCoreClockUpdate()
---------------------------------------------------------------------------- */
void SystemCoreClockUpdate (void) {
uint32_t freq;
uint32_t PLL1MainClock;
uint32_t PLL2MainClock;
/* Periph_clk2_clk ---> Periph_clk */
if (CCM->CBCDR & CCM_CBCDR_PERIPH_CLK_SEL_MASK)
{
switch (CCM->CBCMR & CCM_CBCMR_PERIPH_CLK2_SEL_MASK)
{
/* Pll3_sw_clk ---> Periph_clk2_clk ---> Periph_clk */
case CCM_CBCMR_PERIPH_CLK2_SEL(0U):
freq = (24000000UL * ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_DIV_SELECT_MASK) ? 22U : 20U));
break;
/* Osc_clk ---> Periph_clk2_clk ---> Periph_clk */
case CCM_CBCMR_PERIPH_CLK2_SEL(1U):
freq = 24000000UL;
break;
case CCM_CBCMR_PERIPH_CLK2_SEL(2U):
case CCM_CBCMR_PERIPH_CLK2_SEL(3U):
default:
freq = 0U;
break;
}
freq /= (((CCM->CBCDR & CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >> CCM_CBCDR_PERIPH_CLK2_PODF_SHIFT) + 1U);
}
/* Pre_Periph_clk ---> Periph_clk */
else
{
PLL1MainClock = ((24000000UL * ((CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK) >>
CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT)) >> 1U);
PLL2MainClock = (24000000UL * ((CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_DIV_SELECT_MASK) ? 22U : 20U));
PLL2MainClock += ((uint64_t)24000000UL * ((uint64_t)(CCM_ANALOG->PLL_SYS_NUM))) / ((uint64_t)(CCM_ANALOG->PLL_SYS_DENOM));
switch (CCM->CBCMR & CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
{
/* PLL2 ---> Pre_Periph_clk ---> Periph_clk */
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(0U):
freq = PLL2MainClock;
break;
/* PLL2 PFD2 ---> Pre_Periph_clk ---> Periph_clk */
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(1U):
freq = PLL2MainClock / ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD2_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD2_FRAC_SHIFT) * 18U;
break;
/* PLL2 PFD0 ---> Pre_Periph_clk ---> Periph_clk */
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(2U):
freq = PLL2MainClock / ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD0_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD0_FRAC_SHIFT) * 18U;
break;
/* PLL1 divided(/2) ---> Pre_Periph_clk ---> Periph_clk */
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(3U):
freq = PLL1MainClock / (((CCM->CACRR & CCM_CACRR_ARM_PODF_MASK) >> CCM_CACRR_ARM_PODF_SHIFT) + 1U);
break;
default:
freq = 0U;
break;
}
}
SystemCoreClock = (freq / (((CCM->CBCDR & CCM_CBCDR_AHB_PODF_MASK) >> CCM_CBCDR_AHB_PODF_SHIFT) + 1U));
}
Reference in New Issue View Git Blame Copy Permalink