284 lines
14 KiB
C
284 lines
14 KiB
C
//*****************************************************************************
|
|
//
|
|
// pwm.h - API function protoypes for Pulse Width Modulation (PWM) ports
|
|
//
|
|
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __PWM_H__
|
|
#define __PWM_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// If building with a C++ compiler, make all of the definitions in this header
|
|
// have a C binding.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following defines are passed to PWMGenConfigure() as the ulConfig
|
|
// parameter and specify the configuration of the PWM generator.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_GEN_MODE_DOWN 0x00000000 // Down count mode
|
|
#define PWM_GEN_MODE_UP_DOWN 0x00000002 // Up/Down count mode
|
|
#define PWM_GEN_MODE_SYNC 0x00000038 // Synchronous updates
|
|
#define PWM_GEN_MODE_NO_SYNC 0x00000000 // Immediate updates
|
|
#define PWM_GEN_MODE_DBG_RUN 0x00000004 // Continue running in debug mode
|
|
#define PWM_GEN_MODE_DBG_STOP 0x00000000 // Stop running in debug mode
|
|
#define PWM_GEN_MODE_FAULT_LATCHED \
|
|
0x00040000 // Fault is latched
|
|
#define PWM_GEN_MODE_FAULT_UNLATCHED \
|
|
0x00000000 // Fault is not latched
|
|
#define PWM_GEN_MODE_FAULT_MINPER \
|
|
0x00020000 // Enable min fault period
|
|
#define PWM_GEN_MODE_FAULT_NO_MINPER \
|
|
0x00000000 // Disable min fault period
|
|
#define PWM_GEN_MODE_FAULT_EXT 0x00010000 // Enable extended fault support
|
|
#define PWM_GEN_MODE_FAULT_LEGACY \
|
|
0x00000000 // Disable extended fault support
|
|
#define PWM_GEN_MODE_DB_NO_SYNC 0x00000000 // Deadband updates occur
|
|
// immediately
|
|
#define PWM_GEN_MODE_DB_SYNC_LOCAL \
|
|
0x0000A800 // Deadband updates locally
|
|
// synchronized
|
|
#define PWM_GEN_MODE_DB_SYNC_GLOBAL \
|
|
0x0000FC00 // Deadband updates globally
|
|
// synchronized
|
|
#define PWM_GEN_MODE_GEN_NO_SYNC \
|
|
0x00000000 // Generator mode updates occur
|
|
// immediately
|
|
#define PWM_GEN_MODE_GEN_SYNC_LOCAL \
|
|
0x00000280 // Generator mode updates locally
|
|
// synchronized
|
|
#define PWM_GEN_MODE_GEN_SYNC_GLOBAL \
|
|
0x000003C0 // Generator mode updates globally
|
|
// synchronized
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines for enabling, disabling, and clearing PWM generator interrupts and
|
|
// triggers.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_INT_CNT_ZERO 0x00000001 // Int if COUNT = 0
|
|
#define PWM_INT_CNT_LOAD 0x00000002 // Int if COUNT = LOAD
|
|
#define PWM_INT_CNT_AU 0x00000004 // Int if COUNT = CMPA U
|
|
#define PWM_INT_CNT_AD 0x00000008 // Int if COUNT = CMPA D
|
|
#define PWM_INT_CNT_BU 0x00000010 // Int if COUNT = CMPA U
|
|
#define PWM_INT_CNT_BD 0x00000020 // Int if COUNT = CMPA D
|
|
#define PWM_TR_CNT_ZERO 0x00000100 // Trig if COUNT = 0
|
|
#define PWM_TR_CNT_LOAD 0x00000200 // Trig if COUNT = LOAD
|
|
#define PWM_TR_CNT_AU 0x00000400 // Trig if COUNT = CMPA U
|
|
#define PWM_TR_CNT_AD 0x00000800 // Trig if COUNT = CMPA D
|
|
#define PWM_TR_CNT_BU 0x00001000 // Trig if COUNT = CMPA U
|
|
#define PWM_TR_CNT_BD 0x00002000 // Trig if COUNT = CMPA D
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines for enabling, disabling, and clearing PWM interrupts.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_INT_GEN_0 0x00000001 // Generator 0 interrupt
|
|
#define PWM_INT_GEN_1 0x00000002 // Generator 1 interrupt
|
|
#define PWM_INT_GEN_2 0x00000004 // Generator 2 interrupt
|
|
#define PWM_INT_GEN_3 0x00000008 // Generator 3 interrupt
|
|
#ifndef DEPRECATED
|
|
#define PWM_INT_FAULT 0x00010000 // Fault interrupt
|
|
#endif
|
|
#define PWM_INT_FAULT0 0x00010000 // Fault0 interrupt
|
|
#define PWM_INT_FAULT1 0x00020000 // Fault1 interrupt
|
|
#define PWM_INT_FAULT2 0x00040000 // Fault2 interrupt
|
|
#define PWM_INT_FAULT3 0x00080000 // Fault3 interrupt
|
|
#define PWM_INT_FAULT_M 0x000F0000 // Fault interrupt source mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines to identify the generators within a module.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_GEN_0 0x00000040 // Offset address of Gen0
|
|
#define PWM_GEN_1 0x00000080 // Offset address of Gen1
|
|
#define PWM_GEN_2 0x000000C0 // Offset address of Gen2
|
|
#define PWM_GEN_3 0x00000100 // Offset address of Gen3
|
|
|
|
#define PWM_GEN_0_BIT 0x00000001 // Bit-wise ID for Gen0
|
|
#define PWM_GEN_1_BIT 0x00000002 // Bit-wise ID for Gen1
|
|
#define PWM_GEN_2_BIT 0x00000004 // Bit-wise ID for Gen2
|
|
#define PWM_GEN_3_BIT 0x00000008 // Bit-wise ID for Gen3
|
|
|
|
#define PWM_GEN_EXT_0 0x00000800 // Offset of Gen0 ext address range
|
|
#define PWM_GEN_EXT_1 0x00000880 // Offset of Gen1 ext address range
|
|
#define PWM_GEN_EXT_2 0x00000900 // Offset of Gen2 ext address range
|
|
#define PWM_GEN_EXT_3 0x00000980 // Offset of Gen3 ext address range
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines to identify the outputs within a module.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_OUT_0 0x00000040 // Encoded offset address of PWM0
|
|
#define PWM_OUT_1 0x00000041 // Encoded offset address of PWM1
|
|
#define PWM_OUT_2 0x00000082 // Encoded offset address of PWM2
|
|
#define PWM_OUT_3 0x00000083 // Encoded offset address of PWM3
|
|
#define PWM_OUT_4 0x000000C4 // Encoded offset address of PWM4
|
|
#define PWM_OUT_5 0x000000C5 // Encoded offset address of PWM5
|
|
#define PWM_OUT_6 0x00000106 // Encoded offset address of PWM6
|
|
#define PWM_OUT_7 0x00000107 // Encoded offset address of PWM7
|
|
|
|
#define PWM_OUT_0_BIT 0x00000001 // Bit-wise ID for PWM0
|
|
#define PWM_OUT_1_BIT 0x00000002 // Bit-wise ID for PWM1
|
|
#define PWM_OUT_2_BIT 0x00000004 // Bit-wise ID for PWM2
|
|
#define PWM_OUT_3_BIT 0x00000008 // Bit-wise ID for PWM3
|
|
#define PWM_OUT_4_BIT 0x00000010 // Bit-wise ID for PWM4
|
|
#define PWM_OUT_5_BIT 0x00000020 // Bit-wise ID for PWM5
|
|
#define PWM_OUT_6_BIT 0x00000040 // Bit-wise ID for PWM6
|
|
#define PWM_OUT_7_BIT 0x00000080 // Bit-wise ID for PWM7
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines to identify each of the possible fault trigger conditions in
|
|
// PWM_FAULT_GROUP_0.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_FAULT_GROUP_0 0
|
|
|
|
#define PWM_FAULT_FAULT0 0x00000001
|
|
#define PWM_FAULT_FAULT1 0x00000002
|
|
#define PWM_FAULT_FAULT2 0x00000004
|
|
#define PWM_FAULT_FAULT3 0x00000008
|
|
#define PWM_FAULT_ACMP0 0x00010000
|
|
#define PWM_FAULT_ACMP1 0x00020000
|
|
#define PWM_FAULT_ACMP2 0x00040000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines to identify each of the possible fault trigger conditions in
|
|
// PWM_FAULT_GROUP_1.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_FAULT_GROUP_1 1
|
|
|
|
#define PWM_FAULT_DCMP0 0x00000001
|
|
#define PWM_FAULT_DCMP1 0x00000002
|
|
#define PWM_FAULT_DCMP2 0x00000004
|
|
#define PWM_FAULT_DCMP3 0x00000008
|
|
#define PWM_FAULT_DCMP4 0x00000010
|
|
#define PWM_FAULT_DCMP5 0x00000020
|
|
#define PWM_FAULT_DCMP6 0x00000040
|
|
#define PWM_FAULT_DCMP7 0x00000080
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Defines to identify the sense of each of the external FAULTn signals
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_FAULT0_SENSE_HIGH 0x00000000
|
|
#define PWM_FAULT0_SENSE_LOW 0x00000001
|
|
#define PWM_FAULT1_SENSE_HIGH 0x00000000
|
|
#define PWM_FAULT1_SENSE_LOW 0x00000002
|
|
#define PWM_FAULT2_SENSE_HIGH 0x00000000
|
|
#define PWM_FAULT2_SENSE_LOW 0x00000004
|
|
#define PWM_FAULT3_SENSE_HIGH 0x00000000
|
|
#define PWM_FAULT3_SENSE_LOW 0x00000008
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// API Function prototypes
|
|
//
|
|
//*****************************************************************************
|
|
extern void PWMGenConfigure(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulConfig);
|
|
extern void PWMGenPeriodSet(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulPeriod);
|
|
extern unsigned long PWMGenPeriodGet(unsigned long ulBase,
|
|
unsigned long ulGen);
|
|
extern void PWMGenEnable(unsigned long ulBase, unsigned long ulGen);
|
|
extern void PWMGenDisable(unsigned long ulBase, unsigned long ulGen);
|
|
extern void PWMPulseWidthSet(unsigned long ulBase, unsigned long ulPWMOut,
|
|
unsigned long ulWidth);
|
|
extern unsigned long PWMPulseWidthGet(unsigned long ulBase,
|
|
unsigned long ulPWMOut);
|
|
extern void PWMDeadBandEnable(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned short usRise, unsigned short usFall);
|
|
extern void PWMDeadBandDisable(unsigned long ulBase, unsigned long ulGen);
|
|
extern void PWMSyncUpdate(unsigned long ulBase, unsigned long ulGenBits);
|
|
extern void PWMSyncTimeBase(unsigned long ulBase, unsigned long ulGenBits);
|
|
extern void PWMOutputState(unsigned long ulBase, unsigned long ulPWMOutBits,
|
|
tBoolean bEnable);
|
|
extern void PWMOutputInvert(unsigned long ulBase, unsigned long ulPWMOutBits,
|
|
tBoolean bInvert);
|
|
extern void PWMOutputFaultLevel(unsigned long ulBase,
|
|
unsigned long ulPWMOutBits,
|
|
tBoolean bDriveHigh);
|
|
extern void PWMOutputFault(unsigned long ulBase, unsigned long ulPWMOutBits,
|
|
tBoolean bFaultSuppress);
|
|
extern void PWMGenIntRegister(unsigned long ulBase, unsigned long ulGen,
|
|
void (*pfnIntHandler)(void));
|
|
extern void PWMGenIntUnregister(unsigned long ulBase, unsigned long ulGen);
|
|
extern void PWMFaultIntRegister(unsigned long ulBase,
|
|
void (*pfnIntHandler)(void));
|
|
extern void PWMFaultIntUnregister(unsigned long ulBase);
|
|
extern void PWMGenIntTrigEnable(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulIntTrig);
|
|
extern void PWMGenIntTrigDisable(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulIntTrig);
|
|
extern unsigned long PWMGenIntStatus(unsigned long ulBase, unsigned long ulGen,
|
|
tBoolean bMasked);
|
|
extern void PWMGenIntClear(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulInts);
|
|
extern void PWMIntEnable(unsigned long ulBase, unsigned long ulGenFault);
|
|
extern void PWMIntDisable(unsigned long ulBase, unsigned long ulGenFault);
|
|
extern void PWMFaultIntClear(unsigned long ulBase);
|
|
extern unsigned long PWMIntStatus(unsigned long ulBase, tBoolean bMasked);
|
|
extern void PWMFaultIntClearExt(unsigned long ulBase,
|
|
unsigned long ulFaultInts);
|
|
extern void PWMGenFaultConfigure(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulMinFaultPeriod,
|
|
unsigned long ulFaultSenses);
|
|
extern void PWMGenFaultTriggerSet(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulGroup,
|
|
unsigned long ulFaultTriggers);
|
|
extern unsigned long PWMGenFaultTriggerGet(unsigned long ulBase,
|
|
unsigned long ulGen,
|
|
unsigned long ulGroup);
|
|
extern unsigned long PWMGenFaultStatus(unsigned long ulBase,
|
|
unsigned long ulGen,
|
|
unsigned long ulGroup);
|
|
extern void PWMGenFaultClear(unsigned long ulBase, unsigned long ulGen,
|
|
unsigned long ulGroup,
|
|
unsigned long ulFaultTriggers);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Mark the end of the C bindings section for C++ compilers.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __PWM_H__
|