rtt-f030/bsp/stm32f10x/rtc.c

254 lines
6.0 KiB
C

/*
* File : rtc.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard the first version.
* 2011-11-26 aozima implementation time.
*/
#include <rtthread.h>
#include <stm32f10x.h>
#include "rtc.h"
static struct rt_device rtc;
static rt_err_t rt_rtc_open(rt_device_t dev, rt_uint16_t oflag)
{
if (dev->rx_indicate != RT_NULL)
{
/* Open Interrupt */
}
return RT_EOK;
}
static rt_size_t rt_rtc_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
return 0;
}
static rt_err_t rt_rtc_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
rt_time_t *time;
RT_ASSERT(dev != RT_NULL);
switch (cmd)
{
case RT_DEVICE_CTRL_RTC_GET_TIME:
time = (rt_time_t *)args;
/* read device */
*time = RTC_GetCounter();
break;
case RT_DEVICE_CTRL_RTC_SET_TIME:
{
time = (rt_time_t *)args;
/* Enable PWR and BKP clocks */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Change the current time */
RTC_SetCounter(*time);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
}
break;
}
return RT_EOK;
}
/*******************************************************************************
* Function Name : RTC_Configuration
* Description : Configures the RTC.
* Input : None
* Output : None
* Return : 0 reday,-1 error.
*******************************************************************************/
int RTC_Configuration(void)
{
u32 count=0x200000;
/* Enable PWR and BKP clocks */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
/* Reset Backup Domain */
BKP_DeInit();
/* Enable LSE */
RCC_LSEConfig(RCC_LSE_ON);
/* Wait till LSE is ready */
while ( (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) && (--count) );
if ( count == 0 )
{
return -1;
}
/* Select LSE as RTC Clock Source */
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
/* Enable RTC Clock */
RCC_RTCCLKCmd(ENABLE);
/* Wait for RTC registers synchronization */
RTC_WaitForSynchro();
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Set RTC prescaler: set RTC period to 1sec */
RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) */
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
return 0;
}
void rt_hw_rtc_init(void)
{
rtc.type = RT_Device_Class_RTC;
if (BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
{
rt_kprintf("rtc is not configured\n");
rt_kprintf("please configure with set_date and set_time\n");
if ( RTC_Configuration() != 0)
{
rt_kprintf("rtc configure fail...\r\n");
return ;
}
}
else
{
/* Wait for RTC registers synchronization */
RTC_WaitForSynchro();
}
/* register rtc device */
rtc.init = RT_NULL;
rtc.open = rt_rtc_open;
rtc.close = RT_NULL;
rtc.read = rt_rtc_read;
rtc.write = RT_NULL;
rtc.control = rt_rtc_control;
/* no private */
rtc.user_data = RT_NULL;
rt_device_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
#ifdef RT_USING_FINSH
list_date();
#endif
return;
}
#include <time.h>
#if defined (__IAR_SYSTEMS_ICC__) && (__VER__) >= 6020000 /* for IAR 6.2 later Compiler */
#pragma module_name = "?time"
time_t (__time32)(time_t *t) /* Only supports 32-bit timestamp */
#else
time_t time(time_t* t)
#endif
{
rt_device_t device;
time_t time=0;
device = rt_device_find("rtc");
if (device != RT_NULL)
{
rt_device_control(device, RT_DEVICE_CTRL_RTC_GET_TIME, &time);
if (t != RT_NULL) *t = time;
}
return time;
}
#ifdef RT_USING_FINSH
#include <finsh.h>
void set_date(rt_uint32_t year, rt_uint32_t month, rt_uint32_t day)
{
time_t now;
struct tm* ti;
rt_device_t device;
ti = RT_NULL;
/* get current time */
time(&now);
ti = localtime(&now);
if (ti != RT_NULL)
{
ti->tm_year = year - 1900;
ti->tm_mon = month - 1; /* ti->tm_mon = month; 0~11 */
ti->tm_mday = day;
}
now = mktime(ti);
device = rt_device_find("rtc");
if (device != RT_NULL)
{
rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now);
}
}
FINSH_FUNCTION_EXPORT(set_date, set date. e.g: set_date(2010,2,28))
void set_time(rt_uint32_t hour, rt_uint32_t minute, rt_uint32_t second)
{
time_t now;
struct tm* ti;
rt_device_t device;
ti = RT_NULL;
/* get current time */
time(&now);
ti = localtime(&now);
if (ti != RT_NULL)
{
ti->tm_hour = hour;
ti->tm_min = minute;
ti->tm_sec = second;
}
now = mktime(ti);
device = rt_device_find("rtc");
if (device != RT_NULL)
{
rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now);
}
}
FINSH_FUNCTION_EXPORT(set_time, set time. e.g: set_time(23,59,59))
void list_date(void)
{
time_t now;
time(&now);
rt_kprintf("%s\n", ctime(&now));
}
FINSH_FUNCTION_EXPORT(list_date, show date and time.)
#endif