1019 lines
37 KiB
C
1019 lines
37 KiB
C
/*
|
|
* Copyright (c) 2014, Freescale Semiconductor, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
|
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*/
|
|
/*
|
|
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
|
|
*
|
|
* This file was generated automatically and any changes may be lost.
|
|
*/
|
|
#ifndef __HW_CMP_REGISTERS_H__
|
|
#define __HW_CMP_REGISTERS_H__
|
|
|
|
#include "regs.h"
|
|
|
|
/*
|
|
* MK64F12 CMP
|
|
*
|
|
* High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
|
|
*
|
|
* Registers defined in this header file:
|
|
* - HW_CMP_CR0 - CMP Control Register 0
|
|
* - HW_CMP_CR1 - CMP Control Register 1
|
|
* - HW_CMP_FPR - CMP Filter Period Register
|
|
* - HW_CMP_SCR - CMP Status and Control Register
|
|
* - HW_CMP_DACCR - DAC Control Register
|
|
* - HW_CMP_MUXCR - MUX Control Register
|
|
*
|
|
* - hw_cmp_t - Struct containing all module registers.
|
|
*/
|
|
|
|
//! @name Module base addresses
|
|
//@{
|
|
#ifndef REGS_CMP_BASE
|
|
#define HW_CMP_INSTANCE_COUNT (3U) //!< Number of instances of the CMP module.
|
|
#define HW_CMP0 (0U) //!< Instance number for CMP0.
|
|
#define HW_CMP1 (1U) //!< Instance number for CMP1.
|
|
#define HW_CMP2 (2U) //!< Instance number for CMP2.
|
|
#define REGS_CMP0_BASE (0x40073000U) //!< Base address for CMP0.
|
|
#define REGS_CMP1_BASE (0x40073008U) //!< Base address for CMP1.
|
|
#define REGS_CMP2_BASE (0x40073010U) //!< Base address for CMP2.
|
|
|
|
//! @brief Table of base addresses for CMP instances.
|
|
static const uint32_t __g_regs_CMP_base_addresses[] = {
|
|
REGS_CMP0_BASE,
|
|
REGS_CMP1_BASE,
|
|
REGS_CMP2_BASE,
|
|
};
|
|
|
|
//! @brief Get the base address of CMP by instance number.
|
|
//! @param x CMP instance number, from 0 through 2.
|
|
#define REGS_CMP_BASE(x) (__g_regs_CMP_base_addresses[(x)])
|
|
|
|
//! @brief Get the instance number given a base address.
|
|
//! @param b Base address for an instance of CMP.
|
|
#define REGS_CMP_INSTANCE(b) ((b) == REGS_CMP0_BASE ? HW_CMP0 : (b) == REGS_CMP1_BASE ? HW_CMP1 : (b) == REGS_CMP2_BASE ? HW_CMP2 : 0)
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMP_CR0 - CMP Control Register 0
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMP_CR0 - CMP Control Register 0 (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*/
|
|
typedef union _hw_cmp_cr0
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmp_cr0_bitfields
|
|
{
|
|
uint8_t HYSTCTR : 2; //!< [1:0] Comparator hard block hysteresis
|
|
//! control
|
|
uint8_t RESERVED0 : 2; //!< [3:2]
|
|
uint8_t FILTER_CNT : 3; //!< [6:4] Filter Sample Count
|
|
uint8_t RESERVED1 : 1; //!< [7]
|
|
} B;
|
|
} hw_cmp_cr0_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMP_CR0 register
|
|
*/
|
|
//@{
|
|
#define HW_CMP_CR0_ADDR(x) (REGS_CMP_BASE(x) + 0x0U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMP_CR0(x) (*(__IO hw_cmp_cr0_t *) HW_CMP_CR0_ADDR(x))
|
|
#define HW_CMP_CR0_RD(x) (HW_CMP_CR0(x).U)
|
|
#define HW_CMP_CR0_WR(x, v) (HW_CMP_CR0(x).U = (v))
|
|
#define HW_CMP_CR0_SET(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) | (v)))
|
|
#define HW_CMP_CR0_CLR(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) & ~(v)))
|
|
#define HW_CMP_CR0_TOG(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMP_CR0 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMP_CR0, field HYSTCTR[1:0] (RW)
|
|
*
|
|
* Defines the programmable hysteresis level. The hysteresis values associated
|
|
* with each level are device-specific. See the Data Sheet of the device for the
|
|
* exact values.
|
|
*
|
|
* Values:
|
|
* - 00 - Level 0
|
|
* - 01 - Level 1
|
|
* - 10 - Level 2
|
|
* - 11 - Level 3
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR0_HYSTCTR (0U) //!< Bit position for CMP_CR0_HYSTCTR.
|
|
#define BM_CMP_CR0_HYSTCTR (0x03U) //!< Bit mask for CMP_CR0_HYSTCTR.
|
|
#define BS_CMP_CR0_HYSTCTR (2U) //!< Bit field size in bits for CMP_CR0_HYSTCTR.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR0_HYSTCTR field.
|
|
#define BR_CMP_CR0_HYSTCTR(x) (HW_CMP_CR0(x).B.HYSTCTR)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR0_HYSTCTR.
|
|
#define BF_CMP_CR0_HYSTCTR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR0_HYSTCTR), uint8_t) & BM_CMP_CR0_HYSTCTR)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the HYSTCTR field to a new value.
|
|
#define BW_CMP_CR0_HYSTCTR(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_HYSTCTR) | BF_CMP_CR0_HYSTCTR(v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR0, field FILTER_CNT[6:4] (RW)
|
|
*
|
|
* Represents the number of consecutive samples that must agree prior to the
|
|
* comparator ouput filter accepting a new output state. For information regarding
|
|
* filter programming and latency, see the Functional descriptionThe CMP module
|
|
* can be used to compare two analog input voltages applied to INP and INM. .
|
|
*
|
|
* Values:
|
|
* - 000 - Filter is disabled. If SE = 1, then COUT is a logic 0. This is not a
|
|
* legal state, and is not recommended. If SE = 0, COUT = COUTA.
|
|
* - 001 - One sample must agree. The comparator output is simply sampled.
|
|
* - 010 - 2 consecutive samples must agree.
|
|
* - 011 - 3 consecutive samples must agree.
|
|
* - 100 - 4 consecutive samples must agree.
|
|
* - 101 - 5 consecutive samples must agree.
|
|
* - 110 - 6 consecutive samples must agree.
|
|
* - 111 - 7 consecutive samples must agree.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR0_FILTER_CNT (4U) //!< Bit position for CMP_CR0_FILTER_CNT.
|
|
#define BM_CMP_CR0_FILTER_CNT (0x70U) //!< Bit mask for CMP_CR0_FILTER_CNT.
|
|
#define BS_CMP_CR0_FILTER_CNT (3U) //!< Bit field size in bits for CMP_CR0_FILTER_CNT.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR0_FILTER_CNT field.
|
|
#define BR_CMP_CR0_FILTER_CNT(x) (HW_CMP_CR0(x).B.FILTER_CNT)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR0_FILTER_CNT.
|
|
#define BF_CMP_CR0_FILTER_CNT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR0_FILTER_CNT), uint8_t) & BM_CMP_CR0_FILTER_CNT)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the FILTER_CNT field to a new value.
|
|
#define BW_CMP_CR0_FILTER_CNT(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_FILTER_CNT) | BF_CMP_CR0_FILTER_CNT(v)))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMP_CR1 - CMP Control Register 1
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMP_CR1 - CMP Control Register 1 (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*/
|
|
typedef union _hw_cmp_cr1
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmp_cr1_bitfields
|
|
{
|
|
uint8_t EN : 1; //!< [0] Comparator Module Enable
|
|
uint8_t OPE : 1; //!< [1] Comparator Output Pin Enable
|
|
uint8_t COS : 1; //!< [2] Comparator Output Select
|
|
uint8_t INV : 1; //!< [3] Comparator INVERT
|
|
uint8_t PMODE : 1; //!< [4] Power Mode Select
|
|
uint8_t RESERVED0 : 1; //!< [5]
|
|
uint8_t WE : 1; //!< [6] Windowing Enable
|
|
uint8_t SE : 1; //!< [7] Sample Enable
|
|
} B;
|
|
} hw_cmp_cr1_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMP_CR1 register
|
|
*/
|
|
//@{
|
|
#define HW_CMP_CR1_ADDR(x) (REGS_CMP_BASE(x) + 0x1U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMP_CR1(x) (*(__IO hw_cmp_cr1_t *) HW_CMP_CR1_ADDR(x))
|
|
#define HW_CMP_CR1_RD(x) (HW_CMP_CR1(x).U)
|
|
#define HW_CMP_CR1_WR(x, v) (HW_CMP_CR1(x).U = (v))
|
|
#define HW_CMP_CR1_SET(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) | (v)))
|
|
#define HW_CMP_CR1_CLR(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) & ~(v)))
|
|
#define HW_CMP_CR1_TOG(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMP_CR1 bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field EN[0] (RW)
|
|
*
|
|
* Enables the Analog Comparator module. When the module is not enabled, it
|
|
* remains in the off state, and consumes no power. When the user selects the same
|
|
* input from analog mux to the positive and negative port, the comparator is
|
|
* disabled automatically.
|
|
*
|
|
* Values:
|
|
* - 0 - Analog Comparator is disabled.
|
|
* - 1 - Analog Comparator is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_EN (0U) //!< Bit position for CMP_CR1_EN.
|
|
#define BM_CMP_CR1_EN (0x01U) //!< Bit mask for CMP_CR1_EN.
|
|
#define BS_CMP_CR1_EN (1U) //!< Bit field size in bits for CMP_CR1_EN.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_EN field.
|
|
#define BR_CMP_CR1_EN(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_EN.
|
|
#define BF_CMP_CR1_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_EN), uint8_t) & BM_CMP_CR1_EN)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the EN field to a new value.
|
|
#define BW_CMP_CR1_EN(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field OPE[1] (RW)
|
|
*
|
|
* Values:
|
|
* - 0 - CMPO is not available on the associated CMPO output pin. If the
|
|
* comparator does not own the pin, this field has no effect.
|
|
* - 1 - CMPO is available on the associated CMPO output pin. The comparator
|
|
* output (CMPO) is driven out on the associated CMPO output pin if the
|
|
* comparator owns the pin. If the comparator does not own the field, this bit has no
|
|
* effect.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_OPE (1U) //!< Bit position for CMP_CR1_OPE.
|
|
#define BM_CMP_CR1_OPE (0x02U) //!< Bit mask for CMP_CR1_OPE.
|
|
#define BS_CMP_CR1_OPE (1U) //!< Bit field size in bits for CMP_CR1_OPE.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_OPE field.
|
|
#define BR_CMP_CR1_OPE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_OPE.
|
|
#define BF_CMP_CR1_OPE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_OPE), uint8_t) & BM_CMP_CR1_OPE)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the OPE field to a new value.
|
|
#define BW_CMP_CR1_OPE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field COS[2] (RW)
|
|
*
|
|
* Values:
|
|
* - 0 - Set the filtered comparator output (CMPO) to equal COUT.
|
|
* - 1 - Set the unfiltered comparator output (CMPO) to equal COUTA.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_COS (2U) //!< Bit position for CMP_CR1_COS.
|
|
#define BM_CMP_CR1_COS (0x04U) //!< Bit mask for CMP_CR1_COS.
|
|
#define BS_CMP_CR1_COS (1U) //!< Bit field size in bits for CMP_CR1_COS.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_COS field.
|
|
#define BR_CMP_CR1_COS(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_COS.
|
|
#define BF_CMP_CR1_COS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_COS), uint8_t) & BM_CMP_CR1_COS)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the COS field to a new value.
|
|
#define BW_CMP_CR1_COS(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field INV[3] (RW)
|
|
*
|
|
* Allows selection of the polarity of the analog comparator function. It is
|
|
* also driven to the COUT output, on both the device pin and as SCR[COUT], when
|
|
* OPE=0.
|
|
*
|
|
* Values:
|
|
* - 0 - Does not invert the comparator output.
|
|
* - 1 - Inverts the comparator output.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_INV (3U) //!< Bit position for CMP_CR1_INV.
|
|
#define BM_CMP_CR1_INV (0x08U) //!< Bit mask for CMP_CR1_INV.
|
|
#define BS_CMP_CR1_INV (1U) //!< Bit field size in bits for CMP_CR1_INV.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_INV field.
|
|
#define BR_CMP_CR1_INV(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_INV.
|
|
#define BF_CMP_CR1_INV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_INV), uint8_t) & BM_CMP_CR1_INV)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the INV field to a new value.
|
|
#define BW_CMP_CR1_INV(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field PMODE[4] (RW)
|
|
*
|
|
* See the electrical specifications table in the device Data Sheet for details.
|
|
*
|
|
* Values:
|
|
* - 0 - Low-Speed (LS) Comparison mode selected. In this mode, CMP has slower
|
|
* output propagation delay and lower current consumption.
|
|
* - 1 - High-Speed (HS) Comparison mode selected. In this mode, CMP has faster
|
|
* output propagation delay and higher current consumption.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_PMODE (4U) //!< Bit position for CMP_CR1_PMODE.
|
|
#define BM_CMP_CR1_PMODE (0x10U) //!< Bit mask for CMP_CR1_PMODE.
|
|
#define BS_CMP_CR1_PMODE (1U) //!< Bit field size in bits for CMP_CR1_PMODE.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_PMODE field.
|
|
#define BR_CMP_CR1_PMODE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_PMODE.
|
|
#define BF_CMP_CR1_PMODE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_PMODE), uint8_t) & BM_CMP_CR1_PMODE)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the PMODE field to a new value.
|
|
#define BW_CMP_CR1_PMODE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field WE[6] (RW)
|
|
*
|
|
* At any given time, either SE or WE can be set. If a write to this register
|
|
* attempts to set both, then SE is set and WE is cleared. However, avoid writing
|
|
* 1s to both field locations because this "11" case is reserved and may change in
|
|
* future implementations.
|
|
*
|
|
* Values:
|
|
* - 0 - Windowing mode is not selected.
|
|
* - 1 - Windowing mode is selected.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_WE (6U) //!< Bit position for CMP_CR1_WE.
|
|
#define BM_CMP_CR1_WE (0x40U) //!< Bit mask for CMP_CR1_WE.
|
|
#define BS_CMP_CR1_WE (1U) //!< Bit field size in bits for CMP_CR1_WE.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_WE field.
|
|
#define BR_CMP_CR1_WE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_WE.
|
|
#define BF_CMP_CR1_WE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_WE), uint8_t) & BM_CMP_CR1_WE)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the WE field to a new value.
|
|
#define BW_CMP_CR1_WE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_CR1, field SE[7] (RW)
|
|
*
|
|
* At any given time, either SE or WE can be set. If a write to this register
|
|
* attempts to set both, then SE is set and WE is cleared. However, avoid writing
|
|
* 1s to both field locations because this "11" case is reserved and may change in
|
|
* future implementations.
|
|
*
|
|
* Values:
|
|
* - 0 - Sampling mode is not selected.
|
|
* - 1 - Sampling mode is selected.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_CR1_SE (7U) //!< Bit position for CMP_CR1_SE.
|
|
#define BM_CMP_CR1_SE (0x80U) //!< Bit mask for CMP_CR1_SE.
|
|
#define BS_CMP_CR1_SE (1U) //!< Bit field size in bits for CMP_CR1_SE.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_CR1_SE field.
|
|
#define BR_CMP_CR1_SE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_CR1_SE.
|
|
#define BF_CMP_CR1_SE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_CR1_SE), uint8_t) & BM_CMP_CR1_SE)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the SE field to a new value.
|
|
#define BW_CMP_CR1_SE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMP_FPR - CMP Filter Period Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMP_FPR - CMP Filter Period Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*/
|
|
typedef union _hw_cmp_fpr
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmp_fpr_bitfields
|
|
{
|
|
uint8_t FILT_PER : 8; //!< [7:0] Filter Sample Period
|
|
} B;
|
|
} hw_cmp_fpr_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMP_FPR register
|
|
*/
|
|
//@{
|
|
#define HW_CMP_FPR_ADDR(x) (REGS_CMP_BASE(x) + 0x2U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMP_FPR(x) (*(__IO hw_cmp_fpr_t *) HW_CMP_FPR_ADDR(x))
|
|
#define HW_CMP_FPR_RD(x) (HW_CMP_FPR(x).U)
|
|
#define HW_CMP_FPR_WR(x, v) (HW_CMP_FPR(x).U = (v))
|
|
#define HW_CMP_FPR_SET(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) | (v)))
|
|
#define HW_CMP_FPR_CLR(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) & ~(v)))
|
|
#define HW_CMP_FPR_TOG(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMP_FPR bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMP_FPR, field FILT_PER[7:0] (RW)
|
|
*
|
|
* Specifies the sampling period, in bus clock cycles, of the comparator output
|
|
* filter, when CR1[SE]=0. Setting FILT_PER to 0x0 disables the filter. Filter
|
|
* programming and latency details appear in the Functional descriptionThe CMP
|
|
* module can be used to compare two analog input voltages applied to INP and INM. .
|
|
* This field has no effect when CR1[SE]=1. In that case, the external SAMPLE
|
|
* signal is used to determine the sampling period.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_FPR_FILT_PER (0U) //!< Bit position for CMP_FPR_FILT_PER.
|
|
#define BM_CMP_FPR_FILT_PER (0xFFU) //!< Bit mask for CMP_FPR_FILT_PER.
|
|
#define BS_CMP_FPR_FILT_PER (8U) //!< Bit field size in bits for CMP_FPR_FILT_PER.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_FPR_FILT_PER field.
|
|
#define BR_CMP_FPR_FILT_PER(x) (HW_CMP_FPR(x).U)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_FPR_FILT_PER.
|
|
#define BF_CMP_FPR_FILT_PER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_FPR_FILT_PER), uint8_t) & BM_CMP_FPR_FILT_PER)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the FILT_PER field to a new value.
|
|
#define BW_CMP_FPR_FILT_PER(x, v) (HW_CMP_FPR_WR(x, v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMP_SCR - CMP Status and Control Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMP_SCR - CMP Status and Control Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*/
|
|
typedef union _hw_cmp_scr
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmp_scr_bitfields
|
|
{
|
|
uint8_t COUT : 1; //!< [0] Analog Comparator Output
|
|
uint8_t CFF : 1; //!< [1] Analog Comparator Flag Falling
|
|
uint8_t CFR : 1; //!< [2] Analog Comparator Flag Rising
|
|
uint8_t IEF : 1; //!< [3] Comparator Interrupt Enable Falling
|
|
uint8_t IER : 1; //!< [4] Comparator Interrupt Enable Rising
|
|
uint8_t RESERVED0 : 1; //!< [5]
|
|
uint8_t DMAEN : 1; //!< [6] DMA Enable Control
|
|
uint8_t RESERVED1 : 1; //!< [7]
|
|
} B;
|
|
} hw_cmp_scr_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMP_SCR register
|
|
*/
|
|
//@{
|
|
#define HW_CMP_SCR_ADDR(x) (REGS_CMP_BASE(x) + 0x3U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMP_SCR(x) (*(__IO hw_cmp_scr_t *) HW_CMP_SCR_ADDR(x))
|
|
#define HW_CMP_SCR_RD(x) (HW_CMP_SCR(x).U)
|
|
#define HW_CMP_SCR_WR(x, v) (HW_CMP_SCR(x).U = (v))
|
|
#define HW_CMP_SCR_SET(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) | (v)))
|
|
#define HW_CMP_SCR_CLR(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) & ~(v)))
|
|
#define HW_CMP_SCR_TOG(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMP_SCR bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMP_SCR, field COUT[0] (RO)
|
|
*
|
|
* Returns the current value of the Analog Comparator output, when read. The
|
|
* field is reset to 0 and will read as CR1[INV] when the Analog Comparator module
|
|
* is disabled, that is, when CR1[EN] = 0. Writes to this field are ignored.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_SCR_COUT (0U) //!< Bit position for CMP_SCR_COUT.
|
|
#define BM_CMP_SCR_COUT (0x01U) //!< Bit mask for CMP_SCR_COUT.
|
|
#define BS_CMP_SCR_COUT (1U) //!< Bit field size in bits for CMP_SCR_COUT.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_SCR_COUT field.
|
|
#define BR_CMP_SCR_COUT(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_COUT))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_SCR, field CFF[1] (W1C)
|
|
*
|
|
* Detects a falling-edge on COUT, when set, during normal operation. CFF is
|
|
* cleared by writing 1 to it. During Stop modes, CFF is level sensitive is edge
|
|
* sensitive .
|
|
*
|
|
* Values:
|
|
* - 0 - Falling-edge on COUT has not been detected.
|
|
* - 1 - Falling-edge on COUT has occurred.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_SCR_CFF (1U) //!< Bit position for CMP_SCR_CFF.
|
|
#define BM_CMP_SCR_CFF (0x02U) //!< Bit mask for CMP_SCR_CFF.
|
|
#define BS_CMP_SCR_CFF (1U) //!< Bit field size in bits for CMP_SCR_CFF.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_SCR_CFF field.
|
|
#define BR_CMP_SCR_CFF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_SCR_CFF.
|
|
#define BF_CMP_SCR_CFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_CFF), uint8_t) & BM_CMP_SCR_CFF)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the CFF field to a new value.
|
|
#define BW_CMP_SCR_CFF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_SCR, field CFR[2] (W1C)
|
|
*
|
|
* Detects a rising-edge on COUT, when set, during normal operation. CFR is
|
|
* cleared by writing 1 to it. During Stop modes, CFR is level sensitive is edge
|
|
* sensitive .
|
|
*
|
|
* Values:
|
|
* - 0 - Rising-edge on COUT has not been detected.
|
|
* - 1 - Rising-edge on COUT has occurred.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_SCR_CFR (2U) //!< Bit position for CMP_SCR_CFR.
|
|
#define BM_CMP_SCR_CFR (0x04U) //!< Bit mask for CMP_SCR_CFR.
|
|
#define BS_CMP_SCR_CFR (1U) //!< Bit field size in bits for CMP_SCR_CFR.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_SCR_CFR field.
|
|
#define BR_CMP_SCR_CFR(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_SCR_CFR.
|
|
#define BF_CMP_SCR_CFR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_CFR), uint8_t) & BM_CMP_SCR_CFR)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the CFR field to a new value.
|
|
#define BW_CMP_SCR_CFR(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_SCR, field IEF[3] (RW)
|
|
*
|
|
* Enables the CFF interrupt from the CMP. When this field is set, an interrupt
|
|
* will be asserted when CFF is set.
|
|
*
|
|
* Values:
|
|
* - 0 - Interrupt is disabled.
|
|
* - 1 - Interrupt is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_SCR_IEF (3U) //!< Bit position for CMP_SCR_IEF.
|
|
#define BM_CMP_SCR_IEF (0x08U) //!< Bit mask for CMP_SCR_IEF.
|
|
#define BS_CMP_SCR_IEF (1U) //!< Bit field size in bits for CMP_SCR_IEF.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_SCR_IEF field.
|
|
#define BR_CMP_SCR_IEF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_SCR_IEF.
|
|
#define BF_CMP_SCR_IEF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_IEF), uint8_t) & BM_CMP_SCR_IEF)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the IEF field to a new value.
|
|
#define BW_CMP_SCR_IEF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_SCR, field IER[4] (RW)
|
|
*
|
|
* Enables the CFR interrupt from the CMP. When this field is set, an interrupt
|
|
* will be asserted when CFR is set.
|
|
*
|
|
* Values:
|
|
* - 0 - Interrupt is disabled.
|
|
* - 1 - Interrupt is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_SCR_IER (4U) //!< Bit position for CMP_SCR_IER.
|
|
#define BM_CMP_SCR_IER (0x10U) //!< Bit mask for CMP_SCR_IER.
|
|
#define BS_CMP_SCR_IER (1U) //!< Bit field size in bits for CMP_SCR_IER.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_SCR_IER field.
|
|
#define BR_CMP_SCR_IER(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_SCR_IER.
|
|
#define BF_CMP_SCR_IER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_IER), uint8_t) & BM_CMP_SCR_IER)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the IER field to a new value.
|
|
#define BW_CMP_SCR_IER(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_SCR, field DMAEN[6] (RW)
|
|
*
|
|
* Enables the DMA transfer triggered from the CMP module. When this field is
|
|
* set, a DMA request is asserted when CFR or CFF is set.
|
|
*
|
|
* Values:
|
|
* - 0 - DMA is disabled.
|
|
* - 1 - DMA is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_SCR_DMAEN (6U) //!< Bit position for CMP_SCR_DMAEN.
|
|
#define BM_CMP_SCR_DMAEN (0x40U) //!< Bit mask for CMP_SCR_DMAEN.
|
|
#define BS_CMP_SCR_DMAEN (1U) //!< Bit field size in bits for CMP_SCR_DMAEN.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_SCR_DMAEN field.
|
|
#define BR_CMP_SCR_DMAEN(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_SCR_DMAEN.
|
|
#define BF_CMP_SCR_DMAEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_SCR_DMAEN), uint8_t) & BM_CMP_SCR_DMAEN)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the DMAEN field to a new value.
|
|
#define BW_CMP_SCR_DMAEN(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMP_DACCR - DAC Control Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMP_DACCR - DAC Control Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*/
|
|
typedef union _hw_cmp_daccr
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmp_daccr_bitfields
|
|
{
|
|
uint8_t VOSEL : 6; //!< [5:0] DAC Output Voltage Select
|
|
uint8_t VRSEL : 1; //!< [6] Supply Voltage Reference Source Select
|
|
uint8_t DACEN : 1; //!< [7] DAC Enable
|
|
} B;
|
|
} hw_cmp_daccr_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMP_DACCR register
|
|
*/
|
|
//@{
|
|
#define HW_CMP_DACCR_ADDR(x) (REGS_CMP_BASE(x) + 0x4U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMP_DACCR(x) (*(__IO hw_cmp_daccr_t *) HW_CMP_DACCR_ADDR(x))
|
|
#define HW_CMP_DACCR_RD(x) (HW_CMP_DACCR(x).U)
|
|
#define HW_CMP_DACCR_WR(x, v) (HW_CMP_DACCR(x).U = (v))
|
|
#define HW_CMP_DACCR_SET(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) | (v)))
|
|
#define HW_CMP_DACCR_CLR(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) & ~(v)))
|
|
#define HW_CMP_DACCR_TOG(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMP_DACCR bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMP_DACCR, field VOSEL[5:0] (RW)
|
|
*
|
|
* Selects an output voltage from one of 64 distinct levels. DACO = (V in /64) *
|
|
* (VOSEL[5:0] + 1) , so the DACO range is from V in /64 to V in .
|
|
*/
|
|
//@{
|
|
#define BP_CMP_DACCR_VOSEL (0U) //!< Bit position for CMP_DACCR_VOSEL.
|
|
#define BM_CMP_DACCR_VOSEL (0x3FU) //!< Bit mask for CMP_DACCR_VOSEL.
|
|
#define BS_CMP_DACCR_VOSEL (6U) //!< Bit field size in bits for CMP_DACCR_VOSEL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_DACCR_VOSEL field.
|
|
#define BR_CMP_DACCR_VOSEL(x) (HW_CMP_DACCR(x).B.VOSEL)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_DACCR_VOSEL.
|
|
#define BF_CMP_DACCR_VOSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_DACCR_VOSEL), uint8_t) & BM_CMP_DACCR_VOSEL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the VOSEL field to a new value.
|
|
#define BW_CMP_DACCR_VOSEL(x, v) (HW_CMP_DACCR_WR(x, (HW_CMP_DACCR_RD(x) & ~BM_CMP_DACCR_VOSEL) | BF_CMP_DACCR_VOSEL(v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_DACCR, field VRSEL[6] (RW)
|
|
*
|
|
* Values:
|
|
* - 0 - V is selected as resistor ladder network supply reference V. in1 in
|
|
* - 1 - V is selected as resistor ladder network supply reference V. in2 in
|
|
*/
|
|
//@{
|
|
#define BP_CMP_DACCR_VRSEL (6U) //!< Bit position for CMP_DACCR_VRSEL.
|
|
#define BM_CMP_DACCR_VRSEL (0x40U) //!< Bit mask for CMP_DACCR_VRSEL.
|
|
#define BS_CMP_DACCR_VRSEL (1U) //!< Bit field size in bits for CMP_DACCR_VRSEL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_DACCR_VRSEL field.
|
|
#define BR_CMP_DACCR_VRSEL(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_DACCR_VRSEL.
|
|
#define BF_CMP_DACCR_VRSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_DACCR_VRSEL), uint8_t) & BM_CMP_DACCR_VRSEL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the VRSEL field to a new value.
|
|
#define BW_CMP_DACCR_VRSEL(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_DACCR, field DACEN[7] (RW)
|
|
*
|
|
* Enables the DAC. When the DAC is disabled, it is powered down to conserve
|
|
* power.
|
|
*
|
|
* Values:
|
|
* - 0 - DAC is disabled.
|
|
* - 1 - DAC is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_DACCR_DACEN (7U) //!< Bit position for CMP_DACCR_DACEN.
|
|
#define BM_CMP_DACCR_DACEN (0x80U) //!< Bit mask for CMP_DACCR_DACEN.
|
|
#define BS_CMP_DACCR_DACEN (1U) //!< Bit field size in bits for CMP_DACCR_DACEN.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_DACCR_DACEN field.
|
|
#define BR_CMP_DACCR_DACEN(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_DACCR_DACEN.
|
|
#define BF_CMP_DACCR_DACEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_DACCR_DACEN), uint8_t) & BM_CMP_DACCR_DACEN)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the DACEN field to a new value.
|
|
#define BW_CMP_DACCR_DACEN(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// HW_CMP_MUXCR - MUX Control Register
|
|
//-------------------------------------------------------------------------------------------
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
/*!
|
|
* @brief HW_CMP_MUXCR - MUX Control Register (RW)
|
|
*
|
|
* Reset value: 0x00U
|
|
*/
|
|
typedef union _hw_cmp_muxcr
|
|
{
|
|
uint8_t U;
|
|
struct _hw_cmp_muxcr_bitfields
|
|
{
|
|
uint8_t MSEL : 3; //!< [2:0] Minus Input Mux Control
|
|
uint8_t PSEL : 3; //!< [5:3] Plus Input Mux Control
|
|
uint8_t RESERVED0 : 1; //!< [6]
|
|
uint8_t PSTM : 1; //!< [7] Pass Through Mode Enable
|
|
} B;
|
|
} hw_cmp_muxcr_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @name Constants and macros for entire CMP_MUXCR register
|
|
*/
|
|
//@{
|
|
#define HW_CMP_MUXCR_ADDR(x) (REGS_CMP_BASE(x) + 0x5U)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
#define HW_CMP_MUXCR(x) (*(__IO hw_cmp_muxcr_t *) HW_CMP_MUXCR_ADDR(x))
|
|
#define HW_CMP_MUXCR_RD(x) (HW_CMP_MUXCR(x).U)
|
|
#define HW_CMP_MUXCR_WR(x, v) (HW_CMP_MUXCR(x).U = (v))
|
|
#define HW_CMP_MUXCR_SET(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) | (v)))
|
|
#define HW_CMP_MUXCR_CLR(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) & ~(v)))
|
|
#define HW_CMP_MUXCR_TOG(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) ^ (v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*
|
|
* Constants & macros for individual CMP_MUXCR bitfields
|
|
*/
|
|
|
|
/*!
|
|
* @name Register CMP_MUXCR, field MSEL[2:0] (RW)
|
|
*
|
|
* Determines which input is selected for the minus input of the comparator. For
|
|
* INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate
|
|
* operation selects the same input for both muxes, the comparator automatically
|
|
* shuts down to prevent itself from becoming a noise generator.
|
|
*
|
|
* Values:
|
|
* - 000 - IN0
|
|
* - 001 - IN1
|
|
* - 010 - IN2
|
|
* - 011 - IN3
|
|
* - 100 - IN4
|
|
* - 101 - IN5
|
|
* - 110 - IN6
|
|
* - 111 - IN7
|
|
*/
|
|
//@{
|
|
#define BP_CMP_MUXCR_MSEL (0U) //!< Bit position for CMP_MUXCR_MSEL.
|
|
#define BM_CMP_MUXCR_MSEL (0x07U) //!< Bit mask for CMP_MUXCR_MSEL.
|
|
#define BS_CMP_MUXCR_MSEL (3U) //!< Bit field size in bits for CMP_MUXCR_MSEL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_MUXCR_MSEL field.
|
|
#define BR_CMP_MUXCR_MSEL(x) (HW_CMP_MUXCR(x).B.MSEL)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_MUXCR_MSEL.
|
|
#define BF_CMP_MUXCR_MSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_MUXCR_MSEL), uint8_t) & BM_CMP_MUXCR_MSEL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the MSEL field to a new value.
|
|
#define BW_CMP_MUXCR_MSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_MSEL) | BF_CMP_MUXCR_MSEL(v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_MUXCR, field PSEL[5:3] (RW)
|
|
*
|
|
* Determines which input is selected for the plus input of the comparator. For
|
|
* INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate
|
|
* operation selects the same input for both muxes, the comparator automatically
|
|
* shuts down to prevent itself from becoming a noise generator.
|
|
*
|
|
* Values:
|
|
* - 000 - IN0
|
|
* - 001 - IN1
|
|
* - 010 - IN2
|
|
* - 011 - IN3
|
|
* - 100 - IN4
|
|
* - 101 - IN5
|
|
* - 110 - IN6
|
|
* - 111 - IN7
|
|
*/
|
|
//@{
|
|
#define BP_CMP_MUXCR_PSEL (3U) //!< Bit position for CMP_MUXCR_PSEL.
|
|
#define BM_CMP_MUXCR_PSEL (0x38U) //!< Bit mask for CMP_MUXCR_PSEL.
|
|
#define BS_CMP_MUXCR_PSEL (3U) //!< Bit field size in bits for CMP_MUXCR_PSEL.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_MUXCR_PSEL field.
|
|
#define BR_CMP_MUXCR_PSEL(x) (HW_CMP_MUXCR(x).B.PSEL)
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_MUXCR_PSEL.
|
|
#define BF_CMP_MUXCR_PSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_MUXCR_PSEL), uint8_t) & BM_CMP_MUXCR_PSEL)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the PSEL field to a new value.
|
|
#define BW_CMP_MUXCR_PSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_PSEL) | BF_CMP_MUXCR_PSEL(v)))
|
|
#endif
|
|
//@}
|
|
|
|
/*!
|
|
* @name Register CMP_MUXCR, field PSTM[7] (RW)
|
|
*
|
|
* This bit is used to enable to MUX pass through mode. Pass through mode is
|
|
* always available but for some devices this feature must be always disabled due to
|
|
* the lack of package pins.
|
|
*
|
|
* Values:
|
|
* - 0 - Pass Through Mode is disabled.
|
|
* - 1 - Pass Through Mode is enabled.
|
|
*/
|
|
//@{
|
|
#define BP_CMP_MUXCR_PSTM (7U) //!< Bit position for CMP_MUXCR_PSTM.
|
|
#define BM_CMP_MUXCR_PSTM (0x80U) //!< Bit mask for CMP_MUXCR_PSTM.
|
|
#define BS_CMP_MUXCR_PSTM (1U) //!< Bit field size in bits for CMP_MUXCR_PSTM.
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Read current value of the CMP_MUXCR_PSTM field.
|
|
#define BR_CMP_MUXCR_PSTM(x) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM))
|
|
#endif
|
|
|
|
//! @brief Format value for bitfield CMP_MUXCR_PSTM.
|
|
#define BF_CMP_MUXCR_PSTM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_CMP_MUXCR_PSTM), uint8_t) & BM_CMP_MUXCR_PSTM)
|
|
|
|
#ifndef __LANGUAGE_ASM__
|
|
//! @brief Set the PSTM field to a new value.
|
|
#define BW_CMP_MUXCR_PSTM(x, v) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM) = (v))
|
|
#endif
|
|
//@}
|
|
|
|
//-------------------------------------------------------------------------------------------
|
|
// hw_cmp_t - module struct
|
|
//-------------------------------------------------------------------------------------------
|
|
/*!
|
|
* @brief All CMP module registers.
|
|
*/
|
|
#ifndef __LANGUAGE_ASM__
|
|
#pragma pack(1)
|
|
typedef struct _hw_cmp
|
|
{
|
|
__IO hw_cmp_cr0_t CR0; //!< [0x0] CMP Control Register 0
|
|
__IO hw_cmp_cr1_t CR1; //!< [0x1] CMP Control Register 1
|
|
__IO hw_cmp_fpr_t FPR; //!< [0x2] CMP Filter Period Register
|
|
__IO hw_cmp_scr_t SCR; //!< [0x3] CMP Status and Control Register
|
|
__IO hw_cmp_daccr_t DACCR; //!< [0x4] DAC Control Register
|
|
__IO hw_cmp_muxcr_t MUXCR; //!< [0x5] MUX Control Register
|
|
} hw_cmp_t;
|
|
#pragma pack()
|
|
|
|
//! @brief Macro to access all CMP registers.
|
|
//! @param x CMP instance number.
|
|
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
|
|
//! use the '&' operator, like <code>&HW_CMP(0)</code>.
|
|
#define HW_CMP(x) (*(hw_cmp_t *) REGS_CMP_BASE(x))
|
|
#endif
|
|
|
|
#endif // __HW_CMP_REGISTERS_H__
|
|
// v22/130726/0.9
|
|
// EOF
|