514 lines
14 KiB
C
514 lines
14 KiB
C
#include "ssd1289.h"
|
|
|
|
// Compatible list:
|
|
// ssd1289
|
|
|
|
//内联函数定义,用以提高性能
|
|
#ifdef __CC_ARM /* ARM Compiler */
|
|
#define lcd_inline static __inline
|
|
#elif defined (__ICCARM__) /* for IAR Compiler */
|
|
#define lcd_inline inline
|
|
#elif defined (__GNUC__) /* GNU GCC Compiler */
|
|
#define lcd_inline static __inline
|
|
#else
|
|
#define lcd_inline static
|
|
#endif
|
|
|
|
#define rw_data_prepare() write_cmd(34)
|
|
|
|
|
|
/********* control ***********/
|
|
#include "stm32f10x.h"
|
|
#include "board.h"
|
|
|
|
//输出重定向.当不进行重定向时.
|
|
#define printf rt_kprintf //使用rt_kprintf来输出
|
|
//#define printf(...) //无输出
|
|
|
|
/* LCD is connected to the FSMC_Bank1_NOR/SRAM2 and NE2 is used as ship select signal */
|
|
/* RS <==> A2 */
|
|
#define LCD_REG (*((volatile unsigned short *) 0x64000000)) /* RS = 0 */
|
|
#define LCD_RAM (*((volatile unsigned short *) 0x64000008)) /* RS = 1 */
|
|
|
|
static void LCD_FSMCConfig(void)
|
|
{
|
|
FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
|
|
FSMC_NORSRAMTimingInitTypeDef Timing_read,Timing_write;
|
|
|
|
/* FSMC GPIO configure */
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | RCC_APB2Periph_GPIOF
|
|
| RCC_APB2Periph_GPIOG, ENABLE);
|
|
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
|
|
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
|
|
/*
|
|
FSMC_D0 ~ FSMC_D3
|
|
PD14 FSMC_D0 PD15 FSMC_D1 PD0 FSMC_D2 PD1 FSMC_D3
|
|
*/
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_14 | GPIO_Pin_15;
|
|
GPIO_Init(GPIOD,&GPIO_InitStructure);
|
|
|
|
/*
|
|
FSMC_D4 ~ FSMC_D12
|
|
PE7 ~ PE15 FSMC_D4 ~ FSMC_D12
|
|
*/
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10
|
|
| GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
|
|
GPIO_Init(GPIOE,&GPIO_InitStructure);
|
|
|
|
/* FSMC_D13 ~ FSMC_D15 PD8 ~ PD10 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10;
|
|
GPIO_Init(GPIOD,&GPIO_InitStructure);
|
|
|
|
/*
|
|
FSMC_A0 ~ FSMC_A5 FSMC_A6 ~ FSMC_A9
|
|
PF0 ~ PF5 PF12 ~ PF15
|
|
*/
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3
|
|
| GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
|
|
GPIO_Init(GPIOF,&GPIO_InitStructure);
|
|
|
|
/* FSMC_A10 ~ FSMC_A15 PG0 ~ PG5 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5;
|
|
GPIO_Init(GPIOG,&GPIO_InitStructure);
|
|
|
|
/* FSMC_A16 ~ FSMC_A18 PD11 ~ PD13 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13;
|
|
GPIO_Init(GPIOD,&GPIO_InitStructure);
|
|
|
|
/* RD-PD4 WR-PD5 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5;
|
|
GPIO_Init(GPIOD,&GPIO_InitStructure);
|
|
|
|
/* NBL0-PE0 NBL1-PE1 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
|
|
GPIO_Init(GPIOE,&GPIO_InitStructure);
|
|
|
|
/* NE1/NCE2 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
|
|
GPIO_Init(GPIOD,&GPIO_InitStructure);
|
|
/* NE2 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
GPIO_Init(GPIOG,&GPIO_InitStructure);
|
|
/* NE3 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
GPIO_Init(GPIOG,&GPIO_InitStructure);
|
|
/* NE4 */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
|
|
GPIO_Init(GPIOG,&GPIO_InitStructure);
|
|
}
|
|
/* FSMC GPIO configure */
|
|
|
|
/*-- FSMC Configuration -------------------------------------------------*/
|
|
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &Timing_read;
|
|
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &Timing_write;
|
|
FSMC_NORSRAMStructInit(&FSMC_NORSRAMInitStructure);
|
|
|
|
Timing_read.FSMC_AddressSetupTime = 8; /* 地址建立时间 */
|
|
Timing_read.FSMC_AddressHoldTime = 8; /* 地址保持时间 */
|
|
Timing_read.FSMC_DataSetupTime = 8; /* 数据建立时间 */
|
|
Timing_read.FSMC_AccessMode = FSMC_AccessMode_A; /* FSMC 访问模式 */
|
|
|
|
Timing_write.FSMC_AddressSetupTime = 8; /* 地址建立时间 */
|
|
Timing_write.FSMC_AddressHoldTime = 8; /* 地址保持时间 */
|
|
Timing_write.FSMC_DataSetupTime = 8; /* 数据建立时间 */
|
|
Timing_write.FSMC_AccessMode = FSMC_AccessMode_A; /* FSMC 访问模式 */
|
|
|
|
/* Color LCD configuration ------------------------------------
|
|
LCD configured as follow:
|
|
- Data/Address MUX = Disable
|
|
- Memory Type = SRAM
|
|
- Data Width = 16bit
|
|
- Write Operation = Enable
|
|
- Extended Mode = Enable
|
|
- Asynchronous Wait = Disable */
|
|
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;
|
|
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
|
|
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
|
|
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
|
|
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
|
|
FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
|
|
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
|
|
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
|
|
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
|
|
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
|
|
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
|
|
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Enable;
|
|
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
|
|
|
|
FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
|
|
FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM2, ENABLE);
|
|
}
|
|
|
|
static void delay(int cnt)
|
|
{
|
|
volatile unsigned int dl;
|
|
while(cnt--)
|
|
{
|
|
for(dl=0; dl<500; dl++);
|
|
}
|
|
}
|
|
|
|
static void lcd_port_init(void)
|
|
{
|
|
LCD_FSMCConfig();
|
|
}
|
|
|
|
lcd_inline void write_cmd(unsigned short cmd)
|
|
{
|
|
LCD_REG = cmd;
|
|
}
|
|
|
|
lcd_inline unsigned short read_data(void)
|
|
{
|
|
return LCD_RAM;
|
|
}
|
|
|
|
lcd_inline void write_data(unsigned short data_code )
|
|
{
|
|
LCD_RAM = data_code;
|
|
}
|
|
|
|
lcd_inline void write_reg(unsigned char reg_addr,unsigned short reg_val)
|
|
{
|
|
write_cmd(reg_addr);
|
|
write_data(reg_val);
|
|
}
|
|
|
|
lcd_inline unsigned short read_reg(unsigned char reg_addr)
|
|
{
|
|
unsigned short val=0;
|
|
write_cmd(reg_addr);
|
|
val = read_data();
|
|
return (val);
|
|
}
|
|
|
|
/********* control <只移植以上函数即可> ***********/
|
|
|
|
static unsigned short deviceid=0;//设置一个静态变量用来保存LCD的ID
|
|
|
|
//static unsigned short BGR2RGB(unsigned short c)
|
|
//{
|
|
// u16 r, g, b, rgb;
|
|
//
|
|
// b = (c>>0) & 0x1f;
|
|
// g = (c>>5) & 0x3f;
|
|
// r = (c>>11) & 0x1f;
|
|
//
|
|
// rgb = (b<<11) + (g<<5) + (r<<0);
|
|
//
|
|
// return( rgb );
|
|
//}
|
|
|
|
static void lcd_SetCursor(unsigned int x,unsigned int y)
|
|
{
|
|
write_reg(0x004e,x); /* 0-239 */
|
|
write_reg(0x004f,y); /* 0-319 */
|
|
}
|
|
|
|
/* 读取指定地址的GRAM */
|
|
static unsigned short lcd_read_gram(unsigned int x,unsigned int y)
|
|
{
|
|
unsigned short temp;
|
|
lcd_SetCursor(x,y);
|
|
rw_data_prepare();
|
|
/* dummy read */
|
|
temp = read_data();
|
|
temp = read_data();
|
|
return temp;
|
|
}
|
|
|
|
static void lcd_clear(unsigned short Color)
|
|
{
|
|
unsigned int index=0;
|
|
lcd_SetCursor(0,0);
|
|
rw_data_prepare(); /* Prepare to write GRAM */
|
|
for (index=0; index<(LCD_WIDTH*LCD_HEIGHT); index++)
|
|
{
|
|
write_data(Color);
|
|
}
|
|
}
|
|
|
|
static void lcd_data_bus_test(void)
|
|
{
|
|
unsigned short temp1;
|
|
unsigned short temp2;
|
|
// /* [5:4]-ID~ID0 [3]-AM-1垂直-0水平 */
|
|
// write_reg(0x0003,(1<<12)|(1<<5)|(1<<4) | (0<<3) );
|
|
|
|
/* wirte */
|
|
lcd_SetCursor(0,0);
|
|
rw_data_prepare();
|
|
write_data(0x5555);
|
|
|
|
lcd_SetCursor(1,0);
|
|
rw_data_prepare();
|
|
write_data(0xAAAA);
|
|
|
|
/* read */
|
|
lcd_SetCursor(0,0);
|
|
temp1 = lcd_read_gram(0,0);
|
|
temp2 = lcd_read_gram(1,0);
|
|
|
|
if( (temp1 == 0x5555) && (temp2 == 0xAAAA) )
|
|
{
|
|
printf(" data bus test pass!\r\n");
|
|
}
|
|
else
|
|
{
|
|
printf(" data bus test error: %04X %04X\r\n",temp1,temp2);
|
|
}
|
|
}
|
|
|
|
void ssd1289_init(void)
|
|
{
|
|
lcd_port_init();
|
|
deviceid = read_reg(0x00);
|
|
|
|
/* deviceid check */
|
|
if( deviceid != 0x8989 )
|
|
{
|
|
printf("Invalid LCD ID:%08X\r\n",deviceid);
|
|
printf("Please check you hardware and configure.\r\n");
|
|
}
|
|
else
|
|
{
|
|
printf("\r\nLCD Device ID : %04X ",deviceid);
|
|
}
|
|
|
|
// power supply setting
|
|
// set R07h at 0021h (GON=1,DTE=0,D[1:0]=01)
|
|
write_reg(0x0007,0x0021);
|
|
// set R00h at 0001h (OSCEN=1)
|
|
write_reg(0x0000,0x0001);
|
|
// set R07h at 0023h (GON=1,DTE=0,D[1:0]=11)
|
|
write_reg(0x0007,0x0023);
|
|
// set R10h at 0000h (Exit sleep mode)
|
|
write_reg(0x0010,0x0000);
|
|
// Wait 30ms
|
|
delay(3000);
|
|
// set R07h at 0033h (GON=1,DTE=1,D[1:0]=11)
|
|
write_reg(0x0007,0x0033);
|
|
// Entry mode setting (R11h)
|
|
// R11H Entry mode
|
|
// vsmode DFM1 DFM0 TRANS OEDef WMode DMode1 DMode0 TY1 TY0 ID1 ID0 AM LG2 LG2 LG0
|
|
// 0 1 1 0 0 0 0 0 0 1 1 1 * 0 0 0
|
|
write_reg(0x0011,0x6070);
|
|
// LCD driver AC setting (R02h)
|
|
write_reg(0x0002,0x0600);
|
|
// power control 1
|
|
// DCT3 DCT2 DCT1 DCT0 BT2 BT1 BT0 0 DC3 DC2 DC1 DC0 AP2 AP1 AP0 0
|
|
// 1 0 1 0 1 0 0 0 1 0 1 0 0 1 0 0
|
|
// DCT[3:0] fosc/4 BT[2:0] DC{3:0] fosc/4
|
|
write_reg(0x0003,0x0804);//0xA8A4
|
|
write_reg(0x000C,0x0000);//
|
|
write_reg(0x000D,0x0808);// 0x080C --> 0x0808
|
|
// power control 4
|
|
// 0 0 VCOMG VDV4 VDV3 VDV2 VDV1 VDV0 0 0 0 0 0 0 0 0
|
|
// 0 0 1 0 1 0 1 1 0 0 0 0 0 0 0 0
|
|
write_reg(0x000E,0x2900);
|
|
write_reg(0x001E,0x00B8);
|
|
write_reg(0x0001,0x2B3F);//驱动输出控制320*240 0x6B3F
|
|
write_reg(0x0010,0x0000);
|
|
write_reg(0x0005,0x0000);
|
|
write_reg(0x0006,0x0000);
|
|
write_reg(0x0016,0xEF1C);
|
|
write_reg(0x0017,0x0003);
|
|
write_reg(0x0007,0x0233);//0x0233
|
|
write_reg(0x000B,0x0000|(3<<6));
|
|
write_reg(0x000F,0x0000);//扫描开始地址
|
|
write_reg(0x0041,0x0000);
|
|
write_reg(0x0042,0x0000);
|
|
write_reg(0x0048,0x0000);
|
|
write_reg(0x0049,0x013F);
|
|
write_reg(0x004A,0x0000);
|
|
write_reg(0x004B,0x0000);
|
|
write_reg(0x0044,0xEF00);
|
|
write_reg(0x0045,0x0000);
|
|
write_reg(0x0046,0x013F);
|
|
write_reg(0x0030,0x0707);
|
|
write_reg(0x0031,0x0204);
|
|
write_reg(0x0032,0x0204);
|
|
write_reg(0x0033,0x0502);
|
|
write_reg(0x0034,0x0507);
|
|
write_reg(0x0035,0x0204);
|
|
write_reg(0x0036,0x0204);
|
|
write_reg(0x0037,0x0502);
|
|
write_reg(0x003A,0x0302);
|
|
write_reg(0x003B,0x0302);
|
|
write_reg(0x0023,0x0000);
|
|
write_reg(0x0024,0x0000);
|
|
write_reg(0x0025,0x8000); // 65hz
|
|
write_reg(0x004f,0); // 行首址0
|
|
write_reg(0x004e,0); // 列首址0
|
|
|
|
//数据总线测试,用于测试硬件连接是否正常.
|
|
lcd_data_bus_test();
|
|
//GRAM测试,此测试可以测试LCD控制器内部GRAM.测试通过保证硬件正常
|
|
// lcd_gram_test();
|
|
|
|
//清屏
|
|
lcd_clear( Blue );
|
|
}
|
|
|
|
/* 设置像素点 颜色,X,Y */
|
|
void ssd1289_lcd_set_pixel(const char* pixel, int x, int y)
|
|
{
|
|
lcd_SetCursor(x,y);
|
|
|
|
rw_data_prepare();
|
|
write_data(*(rt_uint16_t*)pixel);
|
|
}
|
|
|
|
/* 获取像素点颜色 */
|
|
void ssd1289_lcd_get_pixel(char* pixel, int x, int y)
|
|
{
|
|
*(rt_uint16_t*)pixel = lcd_read_gram(x, y);
|
|
}
|
|
|
|
/* 画水平线 */
|
|
void ssd1289_lcd_draw_hline(const char* pixel, int x1, int x2, int y)
|
|
{
|
|
/* [5:4]-ID~ID0 [3]-AM-1垂直-0水平 */
|
|
write_reg(0x0011,0x6030 | (0<<3)); // AM=0 hline
|
|
|
|
lcd_SetCursor(x1, y);
|
|
rw_data_prepare(); /* Prepare to write GRAM */
|
|
while (x1 < x2)
|
|
{
|
|
write_data(*(rt_uint16_t*)pixel);
|
|
x1++;
|
|
}
|
|
}
|
|
|
|
/* 垂直线 */
|
|
void ssd1289_lcd_draw_vline(const char* pixel, int x, int y1, int y2)
|
|
{
|
|
/* [5:4]-ID~ID0 [3]-AM-1垂直-0水平 */
|
|
write_reg(0x0011,0x6070 | (1<<3)); // AM=0 vline
|
|
|
|
lcd_SetCursor(x, y1);
|
|
rw_data_prepare(); /* Prepare to write GRAM */
|
|
while (y1 < y2)
|
|
{
|
|
write_data(*(rt_uint16_t*)pixel);
|
|
y1++;
|
|
}
|
|
}
|
|
|
|
/* blit a line */
|
|
void ssd1289_lcd_blit_line(const char* pixels, int x, int y, rt_size_t size)
|
|
{
|
|
rt_uint16_t *ptr;
|
|
|
|
ptr = (rt_uint16_t*)pixels;
|
|
|
|
/* [5:4]-ID~ID0 [3]-AM-1垂直-0水平 */
|
|
write_reg(0x0011,0x6070 | (0<<3)); // AM=0 hline
|
|
|
|
lcd_SetCursor(x, y);
|
|
rw_data_prepare(); /* Prepare to write GRAM */
|
|
while (size)
|
|
{
|
|
write_data(*ptr ++);
|
|
size --;
|
|
}
|
|
}
|
|
|
|
struct rt_device_graphic_ops ssd1289_ops =
|
|
{
|
|
ssd1289_lcd_set_pixel,
|
|
ssd1289_lcd_get_pixel,
|
|
ssd1289_lcd_draw_hline,
|
|
ssd1289_lcd_draw_vline,
|
|
ssd1289_lcd_blit_line
|
|
};
|
|
|
|
struct rt_device _lcd_device;
|
|
static rt_err_t lcd_init(rt_device_t dev)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t lcd_open(rt_device_t dev, rt_uint16_t oflag)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t lcd_close(rt_device_t dev)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t lcd_control(rt_device_t dev, rt_uint8_t cmd, void *args)
|
|
{
|
|
switch (cmd)
|
|
{
|
|
case RTGRAPHIC_CTRL_GET_INFO:
|
|
{
|
|
struct rt_device_graphic_info *info;
|
|
|
|
info = (struct rt_device_graphic_info*) args;
|
|
RT_ASSERT(info != RT_NULL);
|
|
|
|
info->bits_per_pixel = 16;
|
|
info->pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565P;
|
|
info->framebuffer = RT_NULL;
|
|
info->width = 240;
|
|
info->height = 320;
|
|
}
|
|
break;
|
|
|
|
case RTGRAPHIC_CTRL_RECT_UPDATE:
|
|
/* nothong to be done */
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
void rt_hw_lcd_init(void)
|
|
{
|
|
/* LCD RESET */
|
|
/* PF10 : LCD RESET */
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOF, ENABLE);
|
|
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
GPIO_Init(GPIOF,&GPIO_InitStructure);
|
|
|
|
GPIO_ResetBits(GPIOF,GPIO_Pin_10);
|
|
GPIO_SetBits(GPIOF,GPIO_Pin_10);
|
|
/* wait for lcd reset */
|
|
rt_thread_delay(1);
|
|
}
|
|
|
|
/* register lcd device */
|
|
_lcd_device.type = RT_Device_Class_Graphic;
|
|
_lcd_device.init = lcd_init;
|
|
_lcd_device.open = lcd_open;
|
|
_lcd_device.close = lcd_close;
|
|
_lcd_device.control = lcd_control;
|
|
_lcd_device.read = RT_NULL;
|
|
_lcd_device.write = RT_NULL;
|
|
|
|
_lcd_device.user_data = &ssd1289_ops;
|
|
ssd1289_init();
|
|
|
|
/* register graphic device driver */
|
|
rt_device_register(&_lcd_device, "lcd",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STANDALONE);
|
|
}
|
|
|