441 lines
14 KiB
C
441 lines
14 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _FSL_GPIO_H_
|
|
#define _FSL_GPIO_H_
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup gpio
|
|
* @{
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief GPIO driver version 2.1.1. */
|
|
#define FSL_GPIO_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))
|
|
/*@}*/
|
|
|
|
/*! @brief GPIO direction definition */
|
|
typedef enum _gpio_pin_direction
|
|
{
|
|
kGPIO_DigitalInput = 0U, /*!< Set current pin as digital input*/
|
|
kGPIO_DigitalOutput = 1U, /*!< Set current pin as digital output*/
|
|
} gpio_pin_direction_t;
|
|
|
|
#if defined(FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER) && FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER
|
|
/*! @brief GPIO checker attribute */
|
|
typedef enum _gpio_checker_attribute
|
|
{
|
|
kGPIO_UsernonsecureRWUsersecureRWPrivilegedsecureRW =
|
|
0x00U, /*!< User nonsecure:Read+Write; User Secure:Read+Write; Privileged Secure:Read+Write */
|
|
kGPIO_UsernonsecureRUsersecureRWPrivilegedsecureRW =
|
|
0x01U, /*!< User nonsecure:Read; User Secure:Read+Write; Privileged Secure:Read+Write */
|
|
kGPIO_UsernonsecureNUsersecureRWPrivilegedsecureRW =
|
|
0x02U, /*!< User nonsecure:None; User Secure:Read+Write; Privileged Secure:Read+Write */
|
|
kGPIO_UsernonsecureRUsersecureRPrivilegedsecureRW =
|
|
0x03U, /*!< User nonsecure:Read; User Secure:Read; Privileged Secure:Read+Write */
|
|
kGPIO_UsernonsecureNUsersecureRPrivilegedsecureRW =
|
|
0x04U, /*!< User nonsecure:None; User Secure:Read; Privileged Secure:Read+Write */
|
|
kGPIO_UsernonsecureNUsersecureNPrivilegedsecureRW =
|
|
0x05U, /*!< User nonsecure:None; User Secure:None; Privileged Secure:Read+Write */
|
|
kGPIO_UsernonsecureNUsersecureNPrivilegedsecureR =
|
|
0x06U, /*!< User nonsecure:None; User Secure:None; Privileged Secure:Read */
|
|
kGPIO_UsernonsecureNUsersecureNPrivilegedsecureN =
|
|
0x07U, /*!< User nonsecure:None; User Secure:None; Privileged Secure:None */
|
|
kGPIO_IgnoreAttributeCheck = 0x10U, /*!< Ignores the attribute check */
|
|
} gpio_checker_attribute_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @brief The GPIO pin configuration structure.
|
|
*
|
|
* Each pin can only be configured as either an output pin or an input pin at a time.
|
|
* If configured as an input pin, leave the outputConfig unused.
|
|
* Note that in some use cases, the corresponding port property should be configured in advance
|
|
* with the PORT_SetPinConfig().
|
|
*/
|
|
typedef struct _gpio_pin_config
|
|
{
|
|
gpio_pin_direction_t pinDirection; /*!< GPIO direction, input or output */
|
|
/* Output configurations; ignore if configured as an input pin */
|
|
uint8_t outputLogic; /*!< Set a default output logic, which has no use in input */
|
|
} gpio_pin_config_t;
|
|
|
|
/*! @} */
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*!
|
|
* @addtogroup gpio_driver
|
|
* @{
|
|
*/
|
|
|
|
/*! @name GPIO Configuration */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Initializes a GPIO pin used by the board.
|
|
*
|
|
* To initialize the GPIO, define a pin configuration, as either input or output, in the user file.
|
|
* Then, call the GPIO_PinInit() function.
|
|
*
|
|
* This is an example to define an input pin or an output pin configuration.
|
|
* @code
|
|
* // Define a digital input pin configuration,
|
|
* gpio_pin_config_t config =
|
|
* {
|
|
* kGPIO_DigitalInput,
|
|
* 0,
|
|
* }
|
|
* //Define a digital output pin configuration,
|
|
* gpio_pin_config_t config =
|
|
* {
|
|
* kGPIO_DigitalOutput,
|
|
* 0,
|
|
* }
|
|
* @endcode
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param pin GPIO port pin number
|
|
* @param config GPIO pin configuration pointer
|
|
*/
|
|
void GPIO_PinInit(GPIO_Type *base, uint32_t pin, const gpio_pin_config_t *config);
|
|
|
|
/*@}*/
|
|
|
|
/*! @name GPIO Output Operations */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Sets the output level of the multiple GPIO pins to the logic 1 or 0.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param pin GPIO pin number
|
|
* @param output GPIO pin output logic level.
|
|
* - 0: corresponding pin output low-logic level.
|
|
* - 1: corresponding pin output high-logic level.
|
|
*/
|
|
static inline void GPIO_WritePinOutput(GPIO_Type *base, uint32_t pin, uint8_t output)
|
|
{
|
|
if (output == 0U)
|
|
{
|
|
base->PCOR = 1U << pin;
|
|
}
|
|
else
|
|
{
|
|
base->PSOR = 1U << pin;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the output level of the multiple GPIO pins to the logic 1.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param mask GPIO pin number macro
|
|
*/
|
|
static inline void GPIO_SetPinsOutput(GPIO_Type *base, uint32_t mask)
|
|
{
|
|
base->PSOR = mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the output level of the multiple GPIO pins to the logic 0.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param mask GPIO pin number macro
|
|
*/
|
|
static inline void GPIO_ClearPinsOutput(GPIO_Type *base, uint32_t mask)
|
|
{
|
|
base->PCOR = mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Reverses the current output logic of the multiple GPIO pins.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param mask GPIO pin number macro
|
|
*/
|
|
static inline void GPIO_TogglePinsOutput(GPIO_Type *base, uint32_t mask)
|
|
{
|
|
base->PTOR = mask;
|
|
}
|
|
/*@}*/
|
|
|
|
/*! @name GPIO Input Operations */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Reads the current input value of the GPIO port.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param pin GPIO pin number
|
|
* @retval GPIO port input value
|
|
* - 0: corresponding pin input low-logic level.
|
|
* - 1: corresponding pin input high-logic level.
|
|
*/
|
|
static inline uint32_t GPIO_ReadPinInput(GPIO_Type *base, uint32_t pin)
|
|
{
|
|
return (((base->PDIR) >> pin) & 0x01U);
|
|
}
|
|
/*@}*/
|
|
|
|
/*! @name GPIO Interrupt */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Reads the GPIO port interrupt status flag.
|
|
*
|
|
* If a pin is configured to generate the DMA request, the corresponding flag
|
|
* is cleared automatically at the completion of the requested DMA transfer.
|
|
* Otherwise, the flag remains set until a logic one is written to that flag.
|
|
* If configured for a level sensitive interrupt that remains asserted, the flag
|
|
* is set again immediately.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @retval The current GPIO port interrupt status flag, for example, 0x00010001 means the
|
|
* pin 0 and 17 have the interrupt.
|
|
*/
|
|
uint32_t GPIO_GetPinsInterruptFlags(GPIO_Type *base);
|
|
|
|
/*!
|
|
* @brief Clears multiple GPIO pin interrupt status flags.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param mask GPIO pin number macro
|
|
*/
|
|
void GPIO_ClearPinsInterruptFlags(GPIO_Type *base, uint32_t mask);
|
|
|
|
#if defined(FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER) && FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER
|
|
/*!
|
|
* @brief The GPIO module supports a device-specific number of data ports, organized as 32-bit
|
|
* words. Each 32-bit data port includes a GACR register, which defines the byte-level
|
|
* attributes required for a successful access to the GPIO programming model. The attribute controls for the 4 data
|
|
* bytes in the GACR follow a standard little endian
|
|
* data convention.
|
|
*
|
|
* @param base GPIO peripheral base pointer (GPIOA, GPIOB, GPIOC, and so on.)
|
|
* @param mask GPIO pin number macro
|
|
*/
|
|
void GPIO_CheckAttributeBytes(GPIO_Type *base, gpio_checker_attribute_t attribute);
|
|
#endif
|
|
|
|
/*@}*/
|
|
/*! @} */
|
|
|
|
/*!
|
|
* @addtogroup fgpio_driver
|
|
* @{
|
|
*/
|
|
|
|
/*
|
|
* Introduces the FGPIO feature.
|
|
*
|
|
* The FGPIO features are only support on some Kinetis MCUs. The FGPIO registers are aliased to the IOPORT
|
|
* interface. Accesses via the IOPORT interface occur in parallel with any instruction fetches and
|
|
* complete in a single cycle. This aliased Fast GPIO memory map is called FGPIO.
|
|
*/
|
|
|
|
#if defined(FSL_FEATURE_SOC_FGPIO_COUNT) && FSL_FEATURE_SOC_FGPIO_COUNT
|
|
|
|
/*! @name FGPIO Configuration */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Initializes a FGPIO pin used by the board.
|
|
*
|
|
* To initialize the FGPIO driver, define a pin configuration, as either input or output, in the user file.
|
|
* Then, call the FGPIO_PinInit() function.
|
|
*
|
|
* This is an example to define an input pin or an output pin configuration:
|
|
* @code
|
|
* // Define a digital input pin configuration,
|
|
* gpio_pin_config_t config =
|
|
* {
|
|
* kGPIO_DigitalInput,
|
|
* 0,
|
|
* }
|
|
* //Define a digital output pin configuration,
|
|
* gpio_pin_config_t config =
|
|
* {
|
|
* kGPIO_DigitalOutput,
|
|
* 0,
|
|
* }
|
|
* @endcode
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param pin FGPIO port pin number
|
|
* @param config FGPIO pin configuration pointer
|
|
*/
|
|
void FGPIO_PinInit(FGPIO_Type *base, uint32_t pin, const gpio_pin_config_t *config);
|
|
|
|
/*@}*/
|
|
|
|
/*! @name FGPIO Output Operations */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Sets the output level of the multiple FGPIO pins to the logic 1 or 0.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param pin FGPIO pin number
|
|
* @param output FGPIOpin output logic level.
|
|
* - 0: corresponding pin output low-logic level.
|
|
* - 1: corresponding pin output high-logic level.
|
|
*/
|
|
static inline void FGPIO_WritePinOutput(FGPIO_Type *base, uint32_t pin, uint8_t output)
|
|
{
|
|
if (output == 0U)
|
|
{
|
|
base->PCOR = 1 << pin;
|
|
}
|
|
else
|
|
{
|
|
base->PSOR = 1 << pin;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the output level of the multiple FGPIO pins to the logic 1.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param mask FGPIO pin number macro
|
|
*/
|
|
static inline void FGPIO_SetPinsOutput(FGPIO_Type *base, uint32_t mask)
|
|
{
|
|
base->PSOR = mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the output level of the multiple FGPIO pins to the logic 0.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param mask FGPIO pin number macro
|
|
*/
|
|
static inline void FGPIO_ClearPinsOutput(FGPIO_Type *base, uint32_t mask)
|
|
{
|
|
base->PCOR = mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Reverses the current output logic of the multiple FGPIO pins.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param mask FGPIO pin number macro
|
|
*/
|
|
static inline void FGPIO_TogglePinsOutput(FGPIO_Type *base, uint32_t mask)
|
|
{
|
|
base->PTOR = mask;
|
|
}
|
|
/*@}*/
|
|
|
|
/*! @name FGPIO Input Operations */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Reads the current input value of the FGPIO port.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param pin FGPIO pin number
|
|
* @retval FGPIO port input value
|
|
* - 0: corresponding pin input low-logic level.
|
|
* - 1: corresponding pin input high-logic level.
|
|
*/
|
|
static inline uint32_t FGPIO_ReadPinInput(FGPIO_Type *base, uint32_t pin)
|
|
{
|
|
return (((base->PDIR) >> pin) & 0x01U);
|
|
}
|
|
/*@}*/
|
|
|
|
/*! @name FGPIO Interrupt */
|
|
/*@{*/
|
|
|
|
/*!
|
|
* @brief Reads the FGPIO port interrupt status flag.
|
|
*
|
|
* If a pin is configured to generate the DMA request, the corresponding flag
|
|
* is cleared automatically at the completion of the requested DMA transfer.
|
|
* Otherwise, the flag remains set until a logic one is written to that flag.
|
|
* If configured for a level-sensitive interrupt that remains asserted, the flag
|
|
* is set again immediately.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @retval The current FGPIO port interrupt status flags, for example, 0x00010001 means the
|
|
* pin 0 and 17 have the interrupt.
|
|
*/
|
|
uint32_t FGPIO_GetPinsInterruptFlags(FGPIO_Type *base);
|
|
|
|
/*!
|
|
* @brief Clears the multiple FGPIO pin interrupt status flag.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param mask FGPIO pin number macro
|
|
*/
|
|
void FGPIO_ClearPinsInterruptFlags(FGPIO_Type *base, uint32_t mask);
|
|
|
|
#if defined(FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER) && FSL_FEATURE_GPIO_HAS_ATTRIBUTE_CHECKER
|
|
/*!
|
|
* @brief The FGPIO module supports a device-specific number of data ports, organized as 32-bit
|
|
* words. Each 32-bit data port includes a GACR register, which defines the byte-level
|
|
* attributes required for a successful access to the GPIO programming model. The attribute controls for the 4 data
|
|
* bytes in the GACR follow a standard little endian
|
|
* data convention.
|
|
*
|
|
* @param base FGPIO peripheral base pointer (FGPIOA, FGPIOB, FGPIOC, and so on.)
|
|
* @param mask FGPIO pin number macro
|
|
*/
|
|
void FGPIO_CheckAttributeBytes(FGPIO_Type *base, gpio_checker_attribute_t attribute);
|
|
#endif
|
|
|
|
/*@}*/
|
|
|
|
#endif /* FSL_FEATURE_SOC_FGPIO_COUNT */
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
/*!
|
|
* @}
|
|
*/
|
|
|
|
#endif /* _FSL_GPIO_H_*/
|