rtt-f030/bsp/lm3s8962/Libraries/inc/hw_gpio.h

146 lines
7.3 KiB
C

//*****************************************************************************
//
// hw_gpio.h - Defines and Macros for GPIO hardware.
//
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_GPIO_H__
#define __HW_GPIO_H__
//*****************************************************************************
//
// The following are defines for the GPIO register offsets.
//
//*****************************************************************************
#define GPIO_O_DATA 0x00000000 // GPIO Data
#define GPIO_O_DIR 0x00000400 // GPIO Direction
#define GPIO_O_IS 0x00000404 // GPIO Interrupt Sense
#define GPIO_O_IBE 0x00000408 // GPIO Interrupt Both Edges
#define GPIO_O_IEV 0x0000040C // GPIO Interrupt Event
#define GPIO_O_IM 0x00000410 // GPIO Interrupt Mask
#define GPIO_O_RIS 0x00000414 // GPIO Raw Interrupt Status
#define GPIO_O_MIS 0x00000418 // GPIO Masked Interrupt Status
#define GPIO_O_ICR 0x0000041C // GPIO Interrupt Clear
#define GPIO_O_AFSEL 0x00000420 // GPIO Alternate Function Select
#define GPIO_O_DR2R 0x00000500 // GPIO 2-mA Drive Select
#define GPIO_O_DR4R 0x00000504 // GPIO 4-mA Drive Select
#define GPIO_O_DR8R 0x00000508 // GPIO 8-mA Drive Select
#define GPIO_O_ODR 0x0000050C // GPIO Open Drain Select
#define GPIO_O_PUR 0x00000510 // GPIO Pull-Up Select
#define GPIO_O_PDR 0x00000514 // GPIO Pull-Down Select
#define GPIO_O_SLR 0x00000518 // GPIO Slew Rate Control Select
#define GPIO_O_DEN 0x0000051C // GPIO Digital Enable
#define GPIO_O_LOCK 0x00000520 // GPIO Lock
#define GPIO_O_CR 0x00000524 // GPIO Commit
#define GPIO_O_AMSEL 0x00000528 // GPIO Analog Mode Select
#define GPIO_O_PCTL 0x0000052C // GPIO Port Control
#define GPIO_O_ADCCTL 0x00000530 // GPIO ADC Control
#define GPIO_O_DMACTL 0x00000534 // GPIO DMA Control
#define GPIO_O_SI 0x00000538 // GPIO Select Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock
#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked
// and may be modified
#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked
// and may not be modified
#define GPIO_LOCK_KEY 0x1ACCE551 // Unlocks the GPIO_CR register
#define GPIO_LOCK_KEY_DD 0x4C4F434B // Unlocks the GPIO_CR register on
// DustDevil-class devices and
// later
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_SI register.
//
//*****************************************************************************
#define GPIO_SI_SUM 0x00000001 // Summary Interrupt
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the GPIO register offsets.
//
//*****************************************************************************
#define GPIO_O_PeriphID4 0x00000FD0
#define GPIO_O_PeriphID5 0x00000FD4
#define GPIO_O_PeriphID6 0x00000FD8
#define GPIO_O_PeriphID7 0x00000FDC
#define GPIO_O_PeriphID0 0x00000FE0
#define GPIO_O_PeriphID1 0x00000FE4
#define GPIO_O_PeriphID2 0x00000FE8
#define GPIO_O_PeriphID3 0x00000FEC
#define GPIO_O_PCellID0 0x00000FF0
#define GPIO_O_PCellID1 0x00000FF4
#define GPIO_O_PCellID2 0x00000FF8
#define GPIO_O_PCellID3 0x00000FFC
//*****************************************************************************
//
// The following are deprecated defines for the GPIO Register reset values.
//
//*****************************************************************************
#define GPIO_RV_DEN 0x000000FF // Digital input enable reg RV
#define GPIO_RV_PUR 0x000000FF // Pull up select reg RV
#define GPIO_RV_DR2R 0x000000FF // 2ma drive select reg RV
#define GPIO_RV_PCellID1 0x000000F0
#define GPIO_RV_PCellID3 0x000000B1
#define GPIO_RV_PeriphID0 0x00000061
#define GPIO_RV_PeriphID1 0x00000010
#define GPIO_RV_PCellID0 0x0000000D
#define GPIO_RV_PCellID2 0x00000005
#define GPIO_RV_PeriphID2 0x00000004
#define GPIO_RV_LOCK 0x00000001 // Lock register RV
#define GPIO_RV_PeriphID7 0x00000000
#define GPIO_RV_PDR 0x00000000 // Pull down select reg RV
#define GPIO_RV_IC 0x00000000 // Interrupt clear reg RV
#define GPIO_RV_SLR 0x00000000 // Slew rate control enable reg RV
#define GPIO_RV_ODR 0x00000000 // Open drain select reg RV
#define GPIO_RV_IBE 0x00000000 // Interrupt both edges reg RV
#define GPIO_RV_AFSEL 0x00000000 // Mode control select reg RV
#define GPIO_RV_IS 0x00000000 // Interrupt sense reg RV
#define GPIO_RV_IM 0x00000000 // Interrupt mask reg RV
#define GPIO_RV_PeriphID4 0x00000000
#define GPIO_RV_PeriphID5 0x00000000
#define GPIO_RV_DR8R 0x00000000 // 8ma drive select reg RV
#define GPIO_RV_RIS 0x00000000 // Raw interrupt status reg RV
#define GPIO_RV_DR4R 0x00000000 // 4ma drive select reg RV
#define GPIO_RV_IEV 0x00000000 // Intterupt event reg RV
#define GPIO_RV_DIR 0x00000000 // Data direction reg RV
#define GPIO_RV_PeriphID6 0x00000000
#define GPIO_RV_PeriphID3 0x00000000
#define GPIO_RV_DATA 0x00000000 // Data register reset value
#define GPIO_RV_MIS 0x00000000 // Masked interrupt status reg RV
#endif
#endif // __HW_GPIO_H__