chinky/rtt-f030
chinky
/
rtt-f030
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
rtt-f030/bsp/stm32f7-disco/drivers/drv_sdram.c

371 lines
12 KiB
C
Raw Blame History

/*
* File : drv_sdram.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2018-05-17 ZYH first implementation
*/
#include "drv_sdram.h"
#include <rtthread.h>
#ifdef BSP_USING_SDRAM
SDRAM_HandleTypeDef hsdram;
static void BSP_SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command);
/* FMC initialization function */
void MX_FMC_Init(void)
{
FMC_SDRAM_TimingTypeDef SdramTiming;
FMC_SDRAM_CommandTypeDef command;
/** Perform the SDRAM1 memory initialization sequence
*/
hsdram.Instance = FMC_SDRAM_DEVICE;
/* hsdram.Init */
hsdram.Init.SDBank = FMC_SDRAM_BANK1;
hsdram.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
hsdram.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
hsdram.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32;
hsdram.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
hsdram.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
hsdram.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
hsdram.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
hsdram.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
hsdram.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
/* SdramTiming */
SdramTiming.LoadToActiveDelay = 2;
SdramTiming.ExitSelfRefreshDelay = 6;
SdramTiming.SelfRefreshTime = 4;
SdramTiming.RowCycleDelay = 6;
SdramTiming.WriteRecoveryTime = 2;
SdramTiming.RPDelay = 2;
SdramTiming.RCDDelay = 2;
HAL_SDRAM_Init(&hsdram, &SdramTiming);
BSP_SDRAM_Initialization_Sequence(&hsdram, &command);
}
static uint32_t FMC_Initialized = 0;
static void HAL_FMC_MspInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
if (FMC_Initialized)
{
return;
}
FMC_Initialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOI_CLK_ENABLE();
/** FMC GPIO Configuration
PE1 ------> FMC_NBL1
PE0 ------> FMC_NBL0
PG15 ------> FMC_SDNCAS
PD0 ------> FMC_D2
PI4 ------> FMC_NBL2
PD1 ------> FMC_D3
PI3 ------> FMC_D27
PI2 ------> FMC_D26
PF0 ------> FMC_A0
PI5 ------> FMC_NBL3
PI7 ------> FMC_D29
PI10 ------> FMC_D31
PI6 ------> FMC_D28
PH15 ------> FMC_D23
PI1 ------> FMC_D25
PF1 ------> FMC_A1
PI9 ------> FMC_D30
PH13 ------> FMC_D21
PH14 ------> FMC_D22
PI0 ------> FMC_D24
PF2 ------> FMC_A2
PF3 ------> FMC_A3
PG8 ------> FMC_SDCLK
PF4 ------> FMC_A4
PH5 ------> FMC_SDNWE
PH3 ------> FMC_SDNE0
PF5 ------> FMC_A5
PH2 ------> FMC_SDCKE0
PD15 ------> FMC_D1
PD10 ------> FMC_D15
PD14 ------> FMC_D0
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PF12 ------> FMC_A6
PG1 ------> FMC_A11
PF15 ------> FMC_A9
PH12 ------> FMC_D20
PF13 ------> FMC_A7
PG0 ------> FMC_A10
PE8 ------> FMC_D5
PG5 ------> FMC_BA1
PG4 ------> FMC_BA0
PH9 ------> FMC_D17
PH11 ------> FMC_D19
PF14 ------> FMC_A8
PF11 ------> FMC_SDNRAS
PE9 ------> FMC_D6
PE11 ------> FMC_D8
PE14 ------> FMC_D11
PH8 ------> FMC_D16
PH10 ------> FMC_D18
PE7 ------> FMC_D4
PE10 ------> FMC_D7
PE12 ------> FMC_D9
PE15 ------> FMC_D12
PE13 ------> FMC_D10
*/
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = GPIO_PIN_1 | GPIO_PIN_0 | GPIO_PIN_8 | GPIO_PIN_9
| GPIO_PIN_11 | GPIO_PIN_14 | GPIO_PIN_7 | GPIO_PIN_10
| GPIO_PIN_12 | GPIO_PIN_15 | GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = GPIO_PIN_15 | GPIO_PIN_8 | GPIO_PIN_1 | GPIO_PIN_0
| GPIO_PIN_5 | GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_15 | GPIO_PIN_10
| GPIO_PIN_14 | GPIO_PIN_9 | GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = GPIO_PIN_4 | GPIO_PIN_3 | GPIO_PIN_2 | GPIO_PIN_5
| GPIO_PIN_7 | GPIO_PIN_10 | GPIO_PIN_6 | GPIO_PIN_1
| GPIO_PIN_9 | GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3
| GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_12 | GPIO_PIN_15
| GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = GPIO_PIN_15 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_5
| GPIO_PIN_3 | GPIO_PIN_2 | GPIO_PIN_12 | GPIO_PIN_9
| GPIO_PIN_11 | GPIO_PIN_8 | GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
}
void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *sdramHandle)
{
HAL_FMC_MspInit();
}
static uint32_t FMC_DeInitialized = 0;
static void HAL_FMC_MspDeInit(void)
{
if (FMC_DeInitialized)
{
return;
}
FMC_DeInitialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_DISABLE();
/** FMC GPIO Configuration
PE1 ------> FMC_NBL1
PE0 ------> FMC_NBL0
PG15 ------> FMC_SDNCAS
PD0 ------> FMC_D2
PI4 ------> FMC_NBL2
PD1 ------> FMC_D3
PI3 ------> FMC_D27
PI2 ------> FMC_D26
PF0 ------> FMC_A0
PI5 ------> FMC_NBL3
PI7 ------> FMC_D29
PI10 ------> FMC_D31
PI6 ------> FMC_D28
PH15 ------> FMC_D23
PI1 ------> FMC_D25
PF1 ------> FMC_A1
PI9 ------> FMC_D30
PH13 ------> FMC_D21
PH14 ------> FMC_D22
PI0 ------> FMC_D24
PF2 ------> FMC_A2
PF3 ------> FMC_A3
PG8 ------> FMC_SDCLK
PF4 ------> FMC_A4
PH5 ------> FMC_SDNWE
PH3 ------> FMC_SDNE0
PF5 ------> FMC_A5
PH2 ------> FMC_SDCKE0
PD15 ------> FMC_D1
PD10 ------> FMC_D15
PD14 ------> FMC_D0
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PF12 ------> FMC_A6
PG1 ------> FMC_A11
PF15 ------> FMC_A9
PH12 ------> FMC_D20
PF13 ------> FMC_A7
PG0 ------> FMC_A10
PE8 ------> FMC_D5
PG5 ------> FMC_BA1
PG4 ------> FMC_BA0
PH9 ------> FMC_D17
PH11 ------> FMC_D19
PF14 ------> FMC_A8
PF11 ------> FMC_SDNRAS
PE9 ------> FMC_D6
PE11 ------> FMC_D8
PE14 ------> FMC_D11
PH8 ------> FMC_D16
PH10 ------> FMC_D18
PE7 ------> FMC_D4
PE10 ------> FMC_D7
PE12 ------> FMC_D9
PE15 ------> FMC_D12
PE13 ------> FMC_D10
*/
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_1 | GPIO_PIN_0 | GPIO_PIN_8 | GPIO_PIN_9
| GPIO_PIN_11 | GPIO_PIN_14 | GPIO_PIN_7 | GPIO_PIN_10
| GPIO_PIN_12 | GPIO_PIN_15 | GPIO_PIN_13);
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15 | GPIO_PIN_8 | GPIO_PIN_1 | GPIO_PIN_0
| GPIO_PIN_5 | GPIO_PIN_4);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_15 | GPIO_PIN_10
| GPIO_PIN_14 | GPIO_PIN_9 | GPIO_PIN_8);
HAL_GPIO_DeInit(GPIOI, GPIO_PIN_4 | GPIO_PIN_3 | GPIO_PIN_2 | GPIO_PIN_5
| GPIO_PIN_7 | GPIO_PIN_10 | GPIO_PIN_6 | GPIO_PIN_1
| GPIO_PIN_9 | GPIO_PIN_0);
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3
| GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_12 | GPIO_PIN_15
| GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOH, GPIO_PIN_15 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_5
| GPIO_PIN_3 | GPIO_PIN_2 | GPIO_PIN_12 | GPIO_PIN_9
| GPIO_PIN_11 | GPIO_PIN_8 | GPIO_PIN_10);
}
void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *sdramHandle)
{
HAL_FMC_MspDeInit();
}
static void BSP_SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command)
{
__IO uint32_t tmpmrd = 0;
int delay = 216000/3;
/* Step 3: Configure a clock configuration enable command */
Command->CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 1;
Command->ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 4: Insert 100 us minimum delay */
/* Inserted delay is equal to 1 ms due to systick time base unit (ms) */
while(delay)
{
delay--;
}
/* Step 5: Configure a PALL (precharge all) command */
Command->CommandMode = FMC_SDRAM_CMD_PALL;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 1;
Command->ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 6 : Configure a Auto-Refresh command */
Command->CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 8;
Command->ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 7: Program the external memory mode register */
tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_1 |
SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |
SDRAM_MODEREG_CAS_LATENCY_2 |
SDRAM_MODEREG_OPERATING_MODE_STANDARD |
SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;
Command->CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 1;
Command->ModeRegisterDefinition = tmpmrd;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 8: Set the refresh rate counter */
/* (15.62 us x Freq) - 20 */
/* Set the device refresh counter */
hsdram->Instance->SDRTR |= ((uint32_t)((1292) << 1));
}
int bsp_sdram_hw_init(void)
{
MX_FMC_Init();
return 0;
}
#endif
Reference in New Issue View Git Blame Copy Permalink