luohui2320@gmail.com 6e8a644db6 ADD AT91SAM9260 I2C driver ...

According to the Atmel official recommended, use GPIO instead of TWI for I2C communication

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2129 bbd45198-f89e-11dd-88c7-29a3b14d5316

2012-05-22 17:42:34 +00:00

..

application.c

ADD AT91SAM9260 I2C driver

2012-05-22 17:42:34 +00:00

at91_i2c_gpio.c

ADD AT91SAM9260 I2C driver

2012-05-22 17:42:34 +00:00

at91_mci.c

update SDIO protocol

2012-02-28 16:40:40 +00:00

at91_mci.h

Add SDIO stack support, current only support SDSC and SDHC card

2011-10-23 09:46:20 +00:00

at91sam9260_ram.ld

add at91sam926x porting.

2011-04-05 12:49:01 +00:00

board.c

support DBGU,UART0~UART3

2011-07-03 15:16:06 +00:00

board.h

add at91sam926x porting.

2011-04-05 12:49:01 +00:00

console.c

add at91sam926x porting.

2011-04-05 12:49:01 +00:00

led.c

add at91sam926x porting.

2011-04-05 12:49:01 +00:00

led.h

add at91sam926x porting.

2011-04-05 12:49:01 +00:00

macb.c

fix return value type error

2012-04-15 07:51:34 +00:00

macb.h

update AT91SAM9260 macb driver

2012-04-08 10:43:02 +00:00

mii.h

AT91SAM9260 branch

2011-08-23 14:48:10 +00:00

rtconfig.h

enable the RT_LWIP_IGMP in rtconfig.h

2012-04-15 08:43:06 +00:00

rtconfig.py

update the rtconfig.py and SConstruct in the BSP

2012-04-09 03:32:35 +00:00

SConscript

change RT_USING_MMCSD to RT_USING_SDIO

2012-02-21 15:27:21 +00:00

SConstruct

update the rtconfig.py and SConstruct in the BSP

2012-04-09 03:32:35 +00:00

startup.c

AT91SAM9260 branch

2011-08-23 14:48:10 +00:00