rtt-f030/bsp/rm48x50/HALCoGen/include/reg_dcc.h

73 lines
1.9 KiB
C

/** @file reg_dcc.h
* @brief DCC Register Layer Header File
* @date 29.May.2013
* @version 03.05.02
*
* This file contains:
* - Definitions
* - Types
* - Interface Prototypes
* .
* which are relevant for the DCC driver.
*/
/* (c) Texas Instruments 2009-2013, All rights reserved. */
#ifndef __REG_DCC_H__
#define __REG_DCC_H__
#include "sys_common.h"
/* USER CODE BEGIN (0) */
/* USER CODE END */
/* Dcc Register Frame Definition */
/** @struct dccBase
* @brief DCC Base Register Definition
*
* This structure is used to access the DCC module registers.
*/
/** @typedef dccBASE_t
* @brief DCC Register Frame Type Definition
*
* This type is used to access the DCC Registers.
*/
typedef volatile struct dccBase
{
uint32 GCTRL; /**< 0x0000: DCC Control Register */
uint32 REV; /**< 0x0004: DCC Revision Id Register */
uint32 CNT0SEED; /**< 0x0008: DCC Counter0 Seed Register */
uint32 VALID0SEED; /**< 0x000C: DCC Valid0 Seed Register */
uint32 CNT1SEED; /**< 0x0010: DCC Counter1 Seed Register */
uint32 STAT; /**< 0x0014: DCC Status Register */
uint32 CNT0; /**< 0x0018: DCC Counter0 Value Register */
uint32 VALID0; /**< 0x001C: DCC Valid0 Value Register */
uint32 CNT1; /**< 0x0020: DCC Counter1 Value Register */
uint32 CLKSRC1; /**< 0x0024: DCC Counter1 Clock Source Selection Register */
uint32 CLKSRC0; /**< 0x0028: DCC Counter0 Clock Source Selection Register */
} dccBASE_t;
/** @def dccREG1
* @brief DCC1 Register Frame Pointer
*
* This pointer is used by the DCC driver to access the dcc2 module registers.
*/
#define dccREG1 ((dccBASE_t *)0xFFFFEC00U)
/** @def dccREG2
* @brief DCC2 Register Frame Pointer
*
* This pointer is used by the DCC driver to access the dcc2 module registers.
*/
#define dccREG2 ((dccBASE_t *)0xFFFFF400U)
/* USER CODE BEGIN (1) */
/* USER CODE END */
#endif