rtt-f030/bsp/apollo2/libraries/drivers/regs/am_reg_adc.h

865 lines
46 KiB
C

//*****************************************************************************
//
// am_reg_adc.h
//! @file
//!
//! @brief Register macros for the ADC module
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.2.9 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_REG_ADC_H
#define AM_REG_ADC_H
//*****************************************************************************
//
// Instance finder. (1 instance(s) available)
//
//*****************************************************************************
#define AM_REG_ADC_NUM_MODULES 1
#define AM_REG_ADCn(n) \
(REG_ADC_BASEADDR + 0x00000000 * n)
//*****************************************************************************
//
// Register offsets.
//
//*****************************************************************************
#define AM_REG_ADC_CFG_O 0x00000000
#define AM_REG_ADC_STAT_O 0x00000004
#define AM_REG_ADC_SWT_O 0x00000008
#define AM_REG_ADC_SL0CFG_O 0x0000000C
#define AM_REG_ADC_SL1CFG_O 0x00000010
#define AM_REG_ADC_SL2CFG_O 0x00000014
#define AM_REG_ADC_SL3CFG_O 0x00000018
#define AM_REG_ADC_SL4CFG_O 0x0000001C
#define AM_REG_ADC_SL5CFG_O 0x00000020
#define AM_REG_ADC_SL6CFG_O 0x00000024
#define AM_REG_ADC_SL7CFG_O 0x00000028
#define AM_REG_ADC_WULIM_O 0x0000002C
#define AM_REG_ADC_WLLIM_O 0x00000030
#define AM_REG_ADC_FIFO_O 0x00000038
#define AM_REG_ADC_INTEN_O 0x00000200
#define AM_REG_ADC_INTSTAT_O 0x00000204
#define AM_REG_ADC_INTCLR_O 0x00000208
#define AM_REG_ADC_INTSET_O 0x0000020C
//*****************************************************************************
//
// ADC_INTEN - ADC Interrupt registers: Enable
//
//*****************************************************************************
// Window comparator voltage incursion interrupt.
#define AM_REG_ADC_INTEN_WCINC_S 5
#define AM_REG_ADC_INTEN_WCINC_M 0x00000020
#define AM_REG_ADC_INTEN_WCINC(n) (((uint32_t)(n) << 5) & 0x00000020)
#define AM_REG_ADC_INTEN_WCINC_WCINCINT 0x00000020
// Window comparator voltage excursion interrupt.
#define AM_REG_ADC_INTEN_WCEXC_S 4
#define AM_REG_ADC_INTEN_WCEXC_M 0x00000010
#define AM_REG_ADC_INTEN_WCEXC(n) (((uint32_t)(n) << 4) & 0x00000010)
#define AM_REG_ADC_INTEN_WCEXC_WCEXCINT 0x00000010
// FIFO 100 percent full interrupt.
#define AM_REG_ADC_INTEN_FIFOOVR2_S 3
#define AM_REG_ADC_INTEN_FIFOOVR2_M 0x00000008
#define AM_REG_ADC_INTEN_FIFOOVR2(n) (((uint32_t)(n) << 3) & 0x00000008)
#define AM_REG_ADC_INTEN_FIFOOVR2_FIFOFULLINT 0x00000008
// FIFO 75 percent full interrupt.
#define AM_REG_ADC_INTEN_FIFOOVR1_S 2
#define AM_REG_ADC_INTEN_FIFOOVR1_M 0x00000004
#define AM_REG_ADC_INTEN_FIFOOVR1(n) (((uint32_t)(n) << 2) & 0x00000004)
#define AM_REG_ADC_INTEN_FIFOOVR1_FIFO75INT 0x00000004
// ADC scan complete interrupt.
#define AM_REG_ADC_INTEN_SCNCMP_S 1
#define AM_REG_ADC_INTEN_SCNCMP_M 0x00000002
#define AM_REG_ADC_INTEN_SCNCMP(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_INTEN_SCNCMP_SCNCMPINT 0x00000002
// ADC conversion complete interrupt.
#define AM_REG_ADC_INTEN_CNVCMP_S 0
#define AM_REG_ADC_INTEN_CNVCMP_M 0x00000001
#define AM_REG_ADC_INTEN_CNVCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_INTEN_CNVCMP_CNVCMPINT 0x00000001
//*****************************************************************************
//
// ADC_INTSTAT - ADC Interrupt registers: Status
//
//*****************************************************************************
// Window comparator voltage incursion interrupt.
#define AM_REG_ADC_INTSTAT_WCINC_S 5
#define AM_REG_ADC_INTSTAT_WCINC_M 0x00000020
#define AM_REG_ADC_INTSTAT_WCINC(n) (((uint32_t)(n) << 5) & 0x00000020)
#define AM_REG_ADC_INTSTAT_WCINC_WCINCINT 0x00000020
// Window comparator voltage excursion interrupt.
#define AM_REG_ADC_INTSTAT_WCEXC_S 4
#define AM_REG_ADC_INTSTAT_WCEXC_M 0x00000010
#define AM_REG_ADC_INTSTAT_WCEXC(n) (((uint32_t)(n) << 4) & 0x00000010)
#define AM_REG_ADC_INTSTAT_WCEXC_WCEXCINT 0x00000010
// FIFO 100 percent full interrupt.
#define AM_REG_ADC_INTSTAT_FIFOOVR2_S 3
#define AM_REG_ADC_INTSTAT_FIFOOVR2_M 0x00000008
#define AM_REG_ADC_INTSTAT_FIFOOVR2(n) (((uint32_t)(n) << 3) & 0x00000008)
#define AM_REG_ADC_INTSTAT_FIFOOVR2_FIFOFULLINT 0x00000008
// FIFO 75 percent full interrupt.
#define AM_REG_ADC_INTSTAT_FIFOOVR1_S 2
#define AM_REG_ADC_INTSTAT_FIFOOVR1_M 0x00000004
#define AM_REG_ADC_INTSTAT_FIFOOVR1(n) (((uint32_t)(n) << 2) & 0x00000004)
#define AM_REG_ADC_INTSTAT_FIFOOVR1_FIFO75INT 0x00000004
// ADC scan complete interrupt.
#define AM_REG_ADC_INTSTAT_SCNCMP_S 1
#define AM_REG_ADC_INTSTAT_SCNCMP_M 0x00000002
#define AM_REG_ADC_INTSTAT_SCNCMP(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_INTSTAT_SCNCMP_SCNCMPINT 0x00000002
// ADC conversion complete interrupt.
#define AM_REG_ADC_INTSTAT_CNVCMP_S 0
#define AM_REG_ADC_INTSTAT_CNVCMP_M 0x00000001
#define AM_REG_ADC_INTSTAT_CNVCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_INTSTAT_CNVCMP_CNVCMPINT 0x00000001
//*****************************************************************************
//
// ADC_INTCLR - ADC Interrupt registers: Clear
//
//*****************************************************************************
// Window comparator voltage incursion interrupt.
#define AM_REG_ADC_INTCLR_WCINC_S 5
#define AM_REG_ADC_INTCLR_WCINC_M 0x00000020
#define AM_REG_ADC_INTCLR_WCINC(n) (((uint32_t)(n) << 5) & 0x00000020)
#define AM_REG_ADC_INTCLR_WCINC_WCINCINT 0x00000020
// Window comparator voltage excursion interrupt.
#define AM_REG_ADC_INTCLR_WCEXC_S 4
#define AM_REG_ADC_INTCLR_WCEXC_M 0x00000010
#define AM_REG_ADC_INTCLR_WCEXC(n) (((uint32_t)(n) << 4) & 0x00000010)
#define AM_REG_ADC_INTCLR_WCEXC_WCEXCINT 0x00000010
// FIFO 100 percent full interrupt.
#define AM_REG_ADC_INTCLR_FIFOOVR2_S 3
#define AM_REG_ADC_INTCLR_FIFOOVR2_M 0x00000008
#define AM_REG_ADC_INTCLR_FIFOOVR2(n) (((uint32_t)(n) << 3) & 0x00000008)
#define AM_REG_ADC_INTCLR_FIFOOVR2_FIFOFULLINT 0x00000008
// FIFO 75 percent full interrupt.
#define AM_REG_ADC_INTCLR_FIFOOVR1_S 2
#define AM_REG_ADC_INTCLR_FIFOOVR1_M 0x00000004
#define AM_REG_ADC_INTCLR_FIFOOVR1(n) (((uint32_t)(n) << 2) & 0x00000004)
#define AM_REG_ADC_INTCLR_FIFOOVR1_FIFO75INT 0x00000004
// ADC scan complete interrupt.
#define AM_REG_ADC_INTCLR_SCNCMP_S 1
#define AM_REG_ADC_INTCLR_SCNCMP_M 0x00000002
#define AM_REG_ADC_INTCLR_SCNCMP(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_INTCLR_SCNCMP_SCNCMPINT 0x00000002
// ADC conversion complete interrupt.
#define AM_REG_ADC_INTCLR_CNVCMP_S 0
#define AM_REG_ADC_INTCLR_CNVCMP_M 0x00000001
#define AM_REG_ADC_INTCLR_CNVCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_INTCLR_CNVCMP_CNVCMPINT 0x00000001
//*****************************************************************************
//
// ADC_INTSET - ADC Interrupt registers: Set
//
//*****************************************************************************
// Window comparator voltage incursion interrupt.
#define AM_REG_ADC_INTSET_WCINC_S 5
#define AM_REG_ADC_INTSET_WCINC_M 0x00000020
#define AM_REG_ADC_INTSET_WCINC(n) (((uint32_t)(n) << 5) & 0x00000020)
#define AM_REG_ADC_INTSET_WCINC_WCINCINT 0x00000020
// Window comparator voltage excursion interrupt.
#define AM_REG_ADC_INTSET_WCEXC_S 4
#define AM_REG_ADC_INTSET_WCEXC_M 0x00000010
#define AM_REG_ADC_INTSET_WCEXC(n) (((uint32_t)(n) << 4) & 0x00000010)
#define AM_REG_ADC_INTSET_WCEXC_WCEXCINT 0x00000010
// FIFO 100 percent full interrupt.
#define AM_REG_ADC_INTSET_FIFOOVR2_S 3
#define AM_REG_ADC_INTSET_FIFOOVR2_M 0x00000008
#define AM_REG_ADC_INTSET_FIFOOVR2(n) (((uint32_t)(n) << 3) & 0x00000008)
#define AM_REG_ADC_INTSET_FIFOOVR2_FIFOFULLINT 0x00000008
// FIFO 75 percent full interrupt.
#define AM_REG_ADC_INTSET_FIFOOVR1_S 2
#define AM_REG_ADC_INTSET_FIFOOVR1_M 0x00000004
#define AM_REG_ADC_INTSET_FIFOOVR1(n) (((uint32_t)(n) << 2) & 0x00000004)
#define AM_REG_ADC_INTSET_FIFOOVR1_FIFO75INT 0x00000004
// ADC scan complete interrupt.
#define AM_REG_ADC_INTSET_SCNCMP_S 1
#define AM_REG_ADC_INTSET_SCNCMP_M 0x00000002
#define AM_REG_ADC_INTSET_SCNCMP(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_INTSET_SCNCMP_SCNCMPINT 0x00000002
// ADC conversion complete interrupt.
#define AM_REG_ADC_INTSET_CNVCMP_S 0
#define AM_REG_ADC_INTSET_CNVCMP_M 0x00000001
#define AM_REG_ADC_INTSET_CNVCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_INTSET_CNVCMP_CNVCMPINT 0x00000001
//*****************************************************************************
//
// ADC_CFG - Configuration Register
//
//*****************************************************************************
// Select the source and frequency for the ADC clock. All values not enumerated
// below are undefined.
#define AM_REG_ADC_CFG_CLKSEL_S 24
#define AM_REG_ADC_CFG_CLKSEL_M 0x03000000
#define AM_REG_ADC_CFG_CLKSEL(n) (((uint32_t)(n) << 24) & 0x03000000)
#define AM_REG_ADC_CFG_CLKSEL_OFF 0x00000000
#define AM_REG_ADC_CFG_CLKSEL_HFRC 0x01000000
#define AM_REG_ADC_CFG_CLKSEL_HFRC_DIV2 0x02000000
// This bit selects the ADC trigger polarity for external off chip triggers.
#define AM_REG_ADC_CFG_TRIGPOL_S 19
#define AM_REG_ADC_CFG_TRIGPOL_M 0x00080000
#define AM_REG_ADC_CFG_TRIGPOL(n) (((uint32_t)(n) << 19) & 0x00080000)
#define AM_REG_ADC_CFG_TRIGPOL_RISING_EDGE 0x00000000
#define AM_REG_ADC_CFG_TRIGPOL_FALLING_EDGE 0x00080000
// Select the ADC trigger source.
#define AM_REG_ADC_CFG_TRIGSEL_S 16
#define AM_REG_ADC_CFG_TRIGSEL_M 0x00070000
#define AM_REG_ADC_CFG_TRIGSEL(n) (((uint32_t)(n) << 16) & 0x00070000)
#define AM_REG_ADC_CFG_TRIGSEL_EXT0 0x00000000
#define AM_REG_ADC_CFG_TRIGSEL_EXT1 0x00010000
#define AM_REG_ADC_CFG_TRIGSEL_EXT2 0x00020000
#define AM_REG_ADC_CFG_TRIGSEL_EXT3 0x00030000
#define AM_REG_ADC_CFG_TRIGSEL_VCOMP 0x00040000
#define AM_REG_ADC_CFG_TRIGSEL_SWT 0x00070000
// Select the ADC reference voltage.
#define AM_REG_ADC_CFG_REFSEL_S 8
#define AM_REG_ADC_CFG_REFSEL_M 0x00000300
#define AM_REG_ADC_CFG_REFSEL(n) (((uint32_t)(n) << 8) & 0x00000300)
#define AM_REG_ADC_CFG_REFSEL_INT2P0 0x00000000
#define AM_REG_ADC_CFG_REFSEL_INT1P5 0x00000100
#define AM_REG_ADC_CFG_REFSEL_EXT2P0 0x00000200
#define AM_REG_ADC_CFG_REFSEL_EXT1P5 0x00000300
// Clock mode register
#define AM_REG_ADC_CFG_CKMODE_S 4
#define AM_REG_ADC_CFG_CKMODE_M 0x00000010
#define AM_REG_ADC_CFG_CKMODE(n) (((uint32_t)(n) << 4) & 0x00000010)
#define AM_REG_ADC_CFG_CKMODE_LPCKMODE 0x00000000
#define AM_REG_ADC_CFG_CKMODE_LLCKMODE 0x00000010
// Select power mode to enter between active scans.
#define AM_REG_ADC_CFG_LPMODE_S 3
#define AM_REG_ADC_CFG_LPMODE_M 0x00000008
#define AM_REG_ADC_CFG_LPMODE(n) (((uint32_t)(n) << 3) & 0x00000008)
#define AM_REG_ADC_CFG_LPMODE_MODE0 0x00000000
#define AM_REG_ADC_CFG_LPMODE_MODE1 0x00000008
// This bit enables Repeating Scan Mode.
#define AM_REG_ADC_CFG_RPTEN_S 2
#define AM_REG_ADC_CFG_RPTEN_M 0x00000004
#define AM_REG_ADC_CFG_RPTEN(n) (((uint32_t)(n) << 2) & 0x00000004)
#define AM_REG_ADC_CFG_RPTEN_SINGLE_SCAN 0x00000000
#define AM_REG_ADC_CFG_RPTEN_REPEATING_SCAN 0x00000004
// This bit enables the ADC module. While the ADC is enabled, the ADCCFG and
// SLOT Configuration regsiter settings must remain stable and unchanged. All
// configuration register settings, slot configuration settings and window
// comparison settings should be written prior to setting the ADCEN bit to '1'.
#define AM_REG_ADC_CFG_ADCEN_S 0
#define AM_REG_ADC_CFG_ADCEN_M 0x00000001
#define AM_REG_ADC_CFG_ADCEN(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_CFG_ADCEN_DIS 0x00000000
#define AM_REG_ADC_CFG_ADCEN_EN 0x00000001
//*****************************************************************************
//
// ADC_STAT - ADC Power Status
//
//*****************************************************************************
// Indicates the power-status of the ADC.
#define AM_REG_ADC_STAT_PWDSTAT_S 0
#define AM_REG_ADC_STAT_PWDSTAT_M 0x00000001
#define AM_REG_ADC_STAT_PWDSTAT(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_STAT_PWDSTAT_ON 0x00000000
#define AM_REG_ADC_STAT_PWDSTAT_POWERED_DOWN 0x00000001
//*****************************************************************************
//
// ADC_SWT - Software trigger
//
//*****************************************************************************
// Writing 0x37 to this register generates a software trigger.
#define AM_REG_ADC_SWT_SWT_S 0
#define AM_REG_ADC_SWT_SWT_M 0x000000FF
#define AM_REG_ADC_SWT_SWT(n) (((uint32_t)(n) << 0) & 0x000000FF)
#define AM_REG_ADC_SWT_SWT_GEN_SW_TRIGGER 0x00000037
//*****************************************************************************
//
// ADC_SL0CFG - Slot 0 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL0CFG_ADSEL0_S 24
#define AM_REG_ADC_SL0CFG_ADSEL0_M 0x07000000
#define AM_REG_ADC_SL0CFG_ADSEL0(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL0CFG_ADSEL0_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL0CFG_PRMODE0_S 16
#define AM_REG_ADC_SL0CFG_PRMODE0_M 0x00030000
#define AM_REG_ADC_SL0CFG_PRMODE0(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL0CFG_PRMODE0_P14B 0x00000000
#define AM_REG_ADC_SL0CFG_PRMODE0_P12B 0x00010000
#define AM_REG_ADC_SL0CFG_PRMODE0_P10B 0x00020000
#define AM_REG_ADC_SL0CFG_PRMODE0_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL0CFG_CHSEL0_S 8
#define AM_REG_ADC_SL0CFG_CHSEL0_M 0x00000F00
#define AM_REG_ADC_SL0CFG_CHSEL0(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL0CFG_CHSEL0_SE0 0x00000000
#define AM_REG_ADC_SL0CFG_CHSEL0_SE1 0x00000100
#define AM_REG_ADC_SL0CFG_CHSEL0_SE2 0x00000200
#define AM_REG_ADC_SL0CFG_CHSEL0_SE3 0x00000300
#define AM_REG_ADC_SL0CFG_CHSEL0_SE4 0x00000400
#define AM_REG_ADC_SL0CFG_CHSEL0_SE5 0x00000500
#define AM_REG_ADC_SL0CFG_CHSEL0_SE6 0x00000600
#define AM_REG_ADC_SL0CFG_CHSEL0_SE7 0x00000700
#define AM_REG_ADC_SL0CFG_CHSEL0_SE8 0x00000800
#define AM_REG_ADC_SL0CFG_CHSEL0_SE9 0x00000900
#define AM_REG_ADC_SL0CFG_CHSEL0_DF0 0x00000A00
#define AM_REG_ADC_SL0CFG_CHSEL0_DF1 0x00000B00
#define AM_REG_ADC_SL0CFG_CHSEL0_TEMP 0x00000C00
#define AM_REG_ADC_SL0CFG_CHSEL0_BATT 0x00000D00
#define AM_REG_ADC_SL0CFG_CHSEL0_VSS 0x00000E00
// This bit enables the window compare function for slot 0.
#define AM_REG_ADC_SL0CFG_WCEN0_S 1
#define AM_REG_ADC_SL0CFG_WCEN0_M 0x00000002
#define AM_REG_ADC_SL0CFG_WCEN0(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL0CFG_WCEN0_WCEN 0x00000002
// This bit enables slot 0 for ADC conversions.
#define AM_REG_ADC_SL0CFG_SLEN0_S 0
#define AM_REG_ADC_SL0CFG_SLEN0_M 0x00000001
#define AM_REG_ADC_SL0CFG_SLEN0(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL0CFG_SLEN0_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL1CFG - Slot 1 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL1CFG_ADSEL1_S 24
#define AM_REG_ADC_SL1CFG_ADSEL1_M 0x07000000
#define AM_REG_ADC_SL1CFG_ADSEL1(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL1CFG_ADSEL1_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL1CFG_PRMODE1_S 16
#define AM_REG_ADC_SL1CFG_PRMODE1_M 0x00030000
#define AM_REG_ADC_SL1CFG_PRMODE1(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL1CFG_PRMODE1_P14B 0x00000000
#define AM_REG_ADC_SL1CFG_PRMODE1_P12B 0x00010000
#define AM_REG_ADC_SL1CFG_PRMODE1_P10B 0x00020000
#define AM_REG_ADC_SL1CFG_PRMODE1_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL1CFG_CHSEL1_S 8
#define AM_REG_ADC_SL1CFG_CHSEL1_M 0x00000F00
#define AM_REG_ADC_SL1CFG_CHSEL1(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL1CFG_CHSEL1_SE0 0x00000000
#define AM_REG_ADC_SL1CFG_CHSEL1_SE1 0x00000100
#define AM_REG_ADC_SL1CFG_CHSEL1_SE2 0x00000200
#define AM_REG_ADC_SL1CFG_CHSEL1_SE3 0x00000300
#define AM_REG_ADC_SL1CFG_CHSEL1_SE4 0x00000400
#define AM_REG_ADC_SL1CFG_CHSEL1_SE5 0x00000500
#define AM_REG_ADC_SL1CFG_CHSEL1_SE6 0x00000600
#define AM_REG_ADC_SL1CFG_CHSEL1_SE7 0x00000700
#define AM_REG_ADC_SL1CFG_CHSEL1_SE8 0x00000800
#define AM_REG_ADC_SL1CFG_CHSEL1_SE9 0x00000900
#define AM_REG_ADC_SL1CFG_CHSEL1_DF0 0x00000A00
#define AM_REG_ADC_SL1CFG_CHSEL1_DF1 0x00000B00
#define AM_REG_ADC_SL1CFG_CHSEL1_TEMP 0x00000C00
#define AM_REG_ADC_SL1CFG_CHSEL1_BATT 0x00000D00
#define AM_REG_ADC_SL1CFG_CHSEL1_VSS 0x00000E00
// This bit enables the window compare function for slot 1.
#define AM_REG_ADC_SL1CFG_WCEN1_S 1
#define AM_REG_ADC_SL1CFG_WCEN1_M 0x00000002
#define AM_REG_ADC_SL1CFG_WCEN1(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL1CFG_WCEN1_WCEN 0x00000002
// This bit enables slot 1 for ADC conversions.
#define AM_REG_ADC_SL1CFG_SLEN1_S 0
#define AM_REG_ADC_SL1CFG_SLEN1_M 0x00000001
#define AM_REG_ADC_SL1CFG_SLEN1(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL1CFG_SLEN1_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL2CFG - Slot 2 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL2CFG_ADSEL2_S 24
#define AM_REG_ADC_SL2CFG_ADSEL2_M 0x07000000
#define AM_REG_ADC_SL2CFG_ADSEL2(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL2CFG_ADSEL2_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL2CFG_PRMODE2_S 16
#define AM_REG_ADC_SL2CFG_PRMODE2_M 0x00030000
#define AM_REG_ADC_SL2CFG_PRMODE2(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL2CFG_PRMODE2_P14B 0x00000000
#define AM_REG_ADC_SL2CFG_PRMODE2_P12B 0x00010000
#define AM_REG_ADC_SL2CFG_PRMODE2_P10B 0x00020000
#define AM_REG_ADC_SL2CFG_PRMODE2_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL2CFG_CHSEL2_S 8
#define AM_REG_ADC_SL2CFG_CHSEL2_M 0x00000F00
#define AM_REG_ADC_SL2CFG_CHSEL2(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL2CFG_CHSEL2_SE0 0x00000000
#define AM_REG_ADC_SL2CFG_CHSEL2_SE1 0x00000100
#define AM_REG_ADC_SL2CFG_CHSEL2_SE2 0x00000200
#define AM_REG_ADC_SL2CFG_CHSEL2_SE3 0x00000300
#define AM_REG_ADC_SL2CFG_CHSEL2_SE4 0x00000400
#define AM_REG_ADC_SL2CFG_CHSEL2_SE5 0x00000500
#define AM_REG_ADC_SL2CFG_CHSEL2_SE6 0x00000600
#define AM_REG_ADC_SL2CFG_CHSEL2_SE7 0x00000700
#define AM_REG_ADC_SL2CFG_CHSEL2_SE8 0x00000800
#define AM_REG_ADC_SL2CFG_CHSEL2_SE9 0x00000900
#define AM_REG_ADC_SL2CFG_CHSEL2_DF0 0x00000A00
#define AM_REG_ADC_SL2CFG_CHSEL2_DF1 0x00000B00
#define AM_REG_ADC_SL2CFG_CHSEL2_TEMP 0x00000C00
#define AM_REG_ADC_SL2CFG_CHSEL2_BATT 0x00000D00
#define AM_REG_ADC_SL2CFG_CHSEL2_VSS 0x00000E00
// This bit enables the window compare function for slot 2.
#define AM_REG_ADC_SL2CFG_WCEN2_S 1
#define AM_REG_ADC_SL2CFG_WCEN2_M 0x00000002
#define AM_REG_ADC_SL2CFG_WCEN2(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL2CFG_WCEN2_WCEN 0x00000002
// This bit enables slot 2 for ADC conversions.
#define AM_REG_ADC_SL2CFG_SLEN2_S 0
#define AM_REG_ADC_SL2CFG_SLEN2_M 0x00000001
#define AM_REG_ADC_SL2CFG_SLEN2(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL2CFG_SLEN2_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL3CFG - Slot 3 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL3CFG_ADSEL3_S 24
#define AM_REG_ADC_SL3CFG_ADSEL3_M 0x07000000
#define AM_REG_ADC_SL3CFG_ADSEL3(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL3CFG_ADSEL3_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL3CFG_PRMODE3_S 16
#define AM_REG_ADC_SL3CFG_PRMODE3_M 0x00030000
#define AM_REG_ADC_SL3CFG_PRMODE3(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL3CFG_PRMODE3_P14B 0x00000000
#define AM_REG_ADC_SL3CFG_PRMODE3_P12B 0x00010000
#define AM_REG_ADC_SL3CFG_PRMODE3_P10B 0x00020000
#define AM_REG_ADC_SL3CFG_PRMODE3_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL3CFG_CHSEL3_S 8
#define AM_REG_ADC_SL3CFG_CHSEL3_M 0x00000F00
#define AM_REG_ADC_SL3CFG_CHSEL3(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL3CFG_CHSEL3_SE0 0x00000000
#define AM_REG_ADC_SL3CFG_CHSEL3_SE1 0x00000100
#define AM_REG_ADC_SL3CFG_CHSEL3_SE2 0x00000200
#define AM_REG_ADC_SL3CFG_CHSEL3_SE3 0x00000300
#define AM_REG_ADC_SL3CFG_CHSEL3_SE4 0x00000400
#define AM_REG_ADC_SL3CFG_CHSEL3_SE5 0x00000500
#define AM_REG_ADC_SL3CFG_CHSEL3_SE6 0x00000600
#define AM_REG_ADC_SL3CFG_CHSEL3_SE7 0x00000700
#define AM_REG_ADC_SL3CFG_CHSEL3_SE8 0x00000800
#define AM_REG_ADC_SL3CFG_CHSEL3_SE9 0x00000900
#define AM_REG_ADC_SL3CFG_CHSEL3_DF0 0x00000A00
#define AM_REG_ADC_SL3CFG_CHSEL3_DF1 0x00000B00
#define AM_REG_ADC_SL3CFG_CHSEL3_TEMP 0x00000C00
#define AM_REG_ADC_SL3CFG_CHSEL3_BATT 0x00000D00
#define AM_REG_ADC_SL3CFG_CHSEL3_VSS 0x00000E00
// This bit enables the window compare function for slot 3.
#define AM_REG_ADC_SL3CFG_WCEN3_S 1
#define AM_REG_ADC_SL3CFG_WCEN3_M 0x00000002
#define AM_REG_ADC_SL3CFG_WCEN3(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL3CFG_WCEN3_WCEN 0x00000002
// This bit enables slot 3 for ADC conversions.
#define AM_REG_ADC_SL3CFG_SLEN3_S 0
#define AM_REG_ADC_SL3CFG_SLEN3_M 0x00000001
#define AM_REG_ADC_SL3CFG_SLEN3(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL3CFG_SLEN3_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL4CFG - Slot 4 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL4CFG_ADSEL4_S 24
#define AM_REG_ADC_SL4CFG_ADSEL4_M 0x07000000
#define AM_REG_ADC_SL4CFG_ADSEL4(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL4CFG_ADSEL4_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL4CFG_PRMODE4_S 16
#define AM_REG_ADC_SL4CFG_PRMODE4_M 0x00030000
#define AM_REG_ADC_SL4CFG_PRMODE4(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL4CFG_PRMODE4_P14B 0x00000000
#define AM_REG_ADC_SL4CFG_PRMODE4_P12B 0x00010000
#define AM_REG_ADC_SL4CFG_PRMODE4_P10B 0x00020000
#define AM_REG_ADC_SL4CFG_PRMODE4_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL4CFG_CHSEL4_S 8
#define AM_REG_ADC_SL4CFG_CHSEL4_M 0x00000F00
#define AM_REG_ADC_SL4CFG_CHSEL4(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL4CFG_CHSEL4_SE0 0x00000000
#define AM_REG_ADC_SL4CFG_CHSEL4_SE1 0x00000100
#define AM_REG_ADC_SL4CFG_CHSEL4_SE2 0x00000200
#define AM_REG_ADC_SL4CFG_CHSEL4_SE3 0x00000300
#define AM_REG_ADC_SL4CFG_CHSEL4_SE4 0x00000400
#define AM_REG_ADC_SL4CFG_CHSEL4_SE5 0x00000500
#define AM_REG_ADC_SL4CFG_CHSEL4_SE6 0x00000600
#define AM_REG_ADC_SL4CFG_CHSEL4_SE7 0x00000700
#define AM_REG_ADC_SL4CFG_CHSEL4_SE8 0x00000800
#define AM_REG_ADC_SL4CFG_CHSEL4_SE9 0x00000900
#define AM_REG_ADC_SL4CFG_CHSEL4_DF0 0x00000A00
#define AM_REG_ADC_SL4CFG_CHSEL4_DF1 0x00000B00
#define AM_REG_ADC_SL4CFG_CHSEL4_TEMP 0x00000C00
#define AM_REG_ADC_SL4CFG_CHSEL4_BATT 0x00000D00
#define AM_REG_ADC_SL4CFG_CHSEL4_VSS 0x00000E00
// This bit enables the window compare function for slot 4.
#define AM_REG_ADC_SL4CFG_WCEN4_S 1
#define AM_REG_ADC_SL4CFG_WCEN4_M 0x00000002
#define AM_REG_ADC_SL4CFG_WCEN4(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL4CFG_WCEN4_WCEN 0x00000002
// This bit enables slot 4 for ADC conversions.
#define AM_REG_ADC_SL4CFG_SLEN4_S 0
#define AM_REG_ADC_SL4CFG_SLEN4_M 0x00000001
#define AM_REG_ADC_SL4CFG_SLEN4(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL4CFG_SLEN4_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL5CFG - Slot 5 Configuration Register
//
//*****************************************************************************
// Select number of measurements to average in the accumulate divide module for
// this slot.
#define AM_REG_ADC_SL5CFG_ADSEL5_S 24
#define AM_REG_ADC_SL5CFG_ADSEL5_M 0x07000000
#define AM_REG_ADC_SL5CFG_ADSEL5(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL5CFG_ADSEL5_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL5CFG_PRMODE5_S 16
#define AM_REG_ADC_SL5CFG_PRMODE5_M 0x00030000
#define AM_REG_ADC_SL5CFG_PRMODE5(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL5CFG_PRMODE5_P14B 0x00000000
#define AM_REG_ADC_SL5CFG_PRMODE5_P12B 0x00010000
#define AM_REG_ADC_SL5CFG_PRMODE5_P10B 0x00020000
#define AM_REG_ADC_SL5CFG_PRMODE5_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL5CFG_CHSEL5_S 8
#define AM_REG_ADC_SL5CFG_CHSEL5_M 0x00000F00
#define AM_REG_ADC_SL5CFG_CHSEL5(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL5CFG_CHSEL5_SE0 0x00000000
#define AM_REG_ADC_SL5CFG_CHSEL5_SE1 0x00000100
#define AM_REG_ADC_SL5CFG_CHSEL5_SE2 0x00000200
#define AM_REG_ADC_SL5CFG_CHSEL5_SE3 0x00000300
#define AM_REG_ADC_SL5CFG_CHSEL5_SE4 0x00000400
#define AM_REG_ADC_SL5CFG_CHSEL5_SE5 0x00000500
#define AM_REG_ADC_SL5CFG_CHSEL5_SE6 0x00000600
#define AM_REG_ADC_SL5CFG_CHSEL5_SE7 0x00000700
#define AM_REG_ADC_SL5CFG_CHSEL5_SE8 0x00000800
#define AM_REG_ADC_SL5CFG_CHSEL5_SE9 0x00000900
#define AM_REG_ADC_SL5CFG_CHSEL5_DF0 0x00000A00
#define AM_REG_ADC_SL5CFG_CHSEL5_DF1 0x00000B00
#define AM_REG_ADC_SL5CFG_CHSEL5_TEMP 0x00000C00
#define AM_REG_ADC_SL5CFG_CHSEL5_BATT 0x00000D00
#define AM_REG_ADC_SL5CFG_CHSEL5_VSS 0x00000E00
// This bit enables the window compare function for slot 5.
#define AM_REG_ADC_SL5CFG_WCEN5_S 1
#define AM_REG_ADC_SL5CFG_WCEN5_M 0x00000002
#define AM_REG_ADC_SL5CFG_WCEN5(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL5CFG_WCEN5_WCEN 0x00000002
// This bit enables slot 5 for ADC conversions.
#define AM_REG_ADC_SL5CFG_SLEN5_S 0
#define AM_REG_ADC_SL5CFG_SLEN5_M 0x00000001
#define AM_REG_ADC_SL5CFG_SLEN5(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL5CFG_SLEN5_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL6CFG - Slot 6 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL6CFG_ADSEL6_S 24
#define AM_REG_ADC_SL6CFG_ADSEL6_M 0x07000000
#define AM_REG_ADC_SL6CFG_ADSEL6(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL6CFG_ADSEL6_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL6CFG_PRMODE6_S 16
#define AM_REG_ADC_SL6CFG_PRMODE6_M 0x00030000
#define AM_REG_ADC_SL6CFG_PRMODE6(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL6CFG_PRMODE6_P14B 0x00000000
#define AM_REG_ADC_SL6CFG_PRMODE6_P12B 0x00010000
#define AM_REG_ADC_SL6CFG_PRMODE6_P10B 0x00020000
#define AM_REG_ADC_SL6CFG_PRMODE6_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL6CFG_CHSEL6_S 8
#define AM_REG_ADC_SL6CFG_CHSEL6_M 0x00000F00
#define AM_REG_ADC_SL6CFG_CHSEL6(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL6CFG_CHSEL6_SE0 0x00000000
#define AM_REG_ADC_SL6CFG_CHSEL6_SE1 0x00000100
#define AM_REG_ADC_SL6CFG_CHSEL6_SE2 0x00000200
#define AM_REG_ADC_SL6CFG_CHSEL6_SE3 0x00000300
#define AM_REG_ADC_SL6CFG_CHSEL6_SE4 0x00000400
#define AM_REG_ADC_SL6CFG_CHSEL6_SE5 0x00000500
#define AM_REG_ADC_SL6CFG_CHSEL6_SE6 0x00000600
#define AM_REG_ADC_SL6CFG_CHSEL6_SE7 0x00000700
#define AM_REG_ADC_SL6CFG_CHSEL6_SE8 0x00000800
#define AM_REG_ADC_SL6CFG_CHSEL6_SE9 0x00000900
#define AM_REG_ADC_SL6CFG_CHSEL6_DF0 0x00000A00
#define AM_REG_ADC_SL6CFG_CHSEL6_DF1 0x00000B00
#define AM_REG_ADC_SL6CFG_CHSEL6_TEMP 0x00000C00
#define AM_REG_ADC_SL6CFG_CHSEL6_BATT 0x00000D00
#define AM_REG_ADC_SL6CFG_CHSEL6_VSS 0x00000E00
// This bit enables the window compare function for slot 6.
#define AM_REG_ADC_SL6CFG_WCEN6_S 1
#define AM_REG_ADC_SL6CFG_WCEN6_M 0x00000002
#define AM_REG_ADC_SL6CFG_WCEN6(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL6CFG_WCEN6_WCEN 0x00000002
// This bit enables slot 6 for ADC conversions.
#define AM_REG_ADC_SL6CFG_SLEN6_S 0
#define AM_REG_ADC_SL6CFG_SLEN6_M 0x00000001
#define AM_REG_ADC_SL6CFG_SLEN6(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL6CFG_SLEN6_SLEN 0x00000001
//*****************************************************************************
//
// ADC_SL7CFG - Slot 7 Configuration Register
//
//*****************************************************************************
// Select the number of measurements to average in the accumulate divide module
// for this slot.
#define AM_REG_ADC_SL7CFG_ADSEL7_S 24
#define AM_REG_ADC_SL7CFG_ADSEL7_M 0x07000000
#define AM_REG_ADC_SL7CFG_ADSEL7(n) (((uint32_t)(n) << 24) & 0x07000000)
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_1_MSRMT 0x00000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_2_MSRMTS 0x01000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_4_MSRMTS 0x02000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_8_MSRMT 0x03000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_16_MSRMTS 0x04000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_32_MSRMTS 0x05000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_64_MSRMTS 0x06000000
#define AM_REG_ADC_SL7CFG_ADSEL7_AVG_128_MSRMTS 0x07000000
// Set the Precision Mode For Slot.
#define AM_REG_ADC_SL7CFG_PRMODE7_S 16
#define AM_REG_ADC_SL7CFG_PRMODE7_M 0x00030000
#define AM_REG_ADC_SL7CFG_PRMODE7(n) (((uint32_t)(n) << 16) & 0x00030000)
#define AM_REG_ADC_SL7CFG_PRMODE7_P14B 0x00000000
#define AM_REG_ADC_SL7CFG_PRMODE7_P12B 0x00010000
#define AM_REG_ADC_SL7CFG_PRMODE7_P10B 0x00020000
#define AM_REG_ADC_SL7CFG_PRMODE7_P8B 0x00030000
// Select one of the 14 channel inputs for this slot.
#define AM_REG_ADC_SL7CFG_CHSEL7_S 8
#define AM_REG_ADC_SL7CFG_CHSEL7_M 0x00000F00
#define AM_REG_ADC_SL7CFG_CHSEL7(n) (((uint32_t)(n) << 8) & 0x00000F00)
#define AM_REG_ADC_SL7CFG_CHSEL7_SE0 0x00000000
#define AM_REG_ADC_SL7CFG_CHSEL7_SE1 0x00000100
#define AM_REG_ADC_SL7CFG_CHSEL7_SE2 0x00000200
#define AM_REG_ADC_SL7CFG_CHSEL7_SE3 0x00000300
#define AM_REG_ADC_SL7CFG_CHSEL7_SE4 0x00000400
#define AM_REG_ADC_SL7CFG_CHSEL7_SE5 0x00000500
#define AM_REG_ADC_SL7CFG_CHSEL7_SE6 0x00000600
#define AM_REG_ADC_SL7CFG_CHSEL7_SE7 0x00000700
#define AM_REG_ADC_SL7CFG_CHSEL7_SE8 0x00000800
#define AM_REG_ADC_SL7CFG_CHSEL7_SE9 0x00000900
#define AM_REG_ADC_SL7CFG_CHSEL7_DF0 0x00000A00
#define AM_REG_ADC_SL7CFG_CHSEL7_DF1 0x00000B00
#define AM_REG_ADC_SL7CFG_CHSEL7_TEMP 0x00000C00
#define AM_REG_ADC_SL7CFG_CHSEL7_BATT 0x00000D00
#define AM_REG_ADC_SL7CFG_CHSEL7_VSS 0x00000E00
// This bit enables the window compare function for slot 7.
#define AM_REG_ADC_SL7CFG_WCEN7_S 1
#define AM_REG_ADC_SL7CFG_WCEN7_M 0x00000002
#define AM_REG_ADC_SL7CFG_WCEN7(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_ADC_SL7CFG_WCEN7_WCEN 0x00000002
// This bit enables slot 7 for ADC conversions.
#define AM_REG_ADC_SL7CFG_SLEN7_S 0
#define AM_REG_ADC_SL7CFG_SLEN7_M 0x00000001
#define AM_REG_ADC_SL7CFG_SLEN7(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_ADC_SL7CFG_SLEN7_SLEN 0x00000001
//*****************************************************************************
//
// ADC_WULIM - Window Comparator Upper Limits Register
//
//*****************************************************************************
// Sets the upper limit for the wondow comparator.
#define AM_REG_ADC_WULIM_ULIM_S 0
#define AM_REG_ADC_WULIM_ULIM_M 0x000FFFFF
#define AM_REG_ADC_WULIM_ULIM(n) (((uint32_t)(n) << 0) & 0x000FFFFF)
//*****************************************************************************
//
// ADC_WLLIM - Window Comparator Lower Limits Register
//
//*****************************************************************************
// Sets the lower limit for the wondow comparator.
#define AM_REG_ADC_WLLIM_LLIM_S 0
#define AM_REG_ADC_WLLIM_LLIM_M 0x000FFFFF
#define AM_REG_ADC_WLLIM_LLIM(n) (((uint32_t)(n) << 0) & 0x000FFFFF)
//*****************************************************************************
//
// ADC_FIFO - FIFO Data and Valid Count Register
//
//*****************************************************************************
// RESERVED.
#define AM_REG_ADC_FIFO_RSVD_S 31
#define AM_REG_ADC_FIFO_RSVD_M 0x80000000
#define AM_REG_ADC_FIFO_RSVD(n) (((uint32_t)(n) << 31) & 0x80000000)
// Slot number associated with this FIFO data.
#define AM_REG_ADC_FIFO_SLOTNUM_S 28
#define AM_REG_ADC_FIFO_SLOTNUM_M 0x70000000
#define AM_REG_ADC_FIFO_SLOTNUM(n) (((uint32_t)(n) << 28) & 0x70000000)
// Number of valid entries in the ADC FIFO.
#define AM_REG_ADC_FIFO_COUNT_S 20
#define AM_REG_ADC_FIFO_COUNT_M 0x0FF00000
#define AM_REG_ADC_FIFO_COUNT(n) (((uint32_t)(n) << 20) & 0x0FF00000)
// Oldest data in the FIFO.
#define AM_REG_ADC_FIFO_DATA_S 0
#define AM_REG_ADC_FIFO_DATA_M 0x000FFFFF
#define AM_REG_ADC_FIFO_DATA(n) (((uint32_t)(n) << 0) & 0x000FFFFF)
#endif // AM_REG_ADC_H