981 lines
46 KiB
C
981 lines
46 KiB
C
/*----------------------------------------------------------------------------+
|
|
|
|
|
| This source code has been made available to you by IBM on an AS-IS
|
|
| basis. Anyone receiving this source is licensed under IBM
|
|
| copyrights to use it in any way he or she deems fit, including
|
|
| copying it, modifying it, compiling it, and redistributing it either
|
|
| with or without modifications. No license under IBM patents or
|
|
| patent applications is to be implied by the copyright license.
|
|
|
|
|
| Any user of this software should understand that IBM cannot provide
|
|
| technical support for this software and will not be responsible for
|
|
| any consequences resulting from the use of this software.
|
|
|
|
|
| Any person who transfers this source code or any derivative work
|
|
| must include the IBM copyright notice, this paragraph, and the
|
|
| preceding two paragraphs in the transferred software.
|
|
|
|
|
| COPYRIGHT I B M CORPORATION 1999
|
|
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
+----------------------------------------------------------------------------*/
|
|
|
|
#ifndef __PPC405_H__
|
|
#define __PPC405_H__
|
|
|
|
/* Define bits and masks for real-mode storage attribute control registers */
|
|
#define PPC_128MB_SACR_BIT(addr) ((addr) >> 27)
|
|
#define PPC_128MB_SACR_VALUE(addr) PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
|
|
|
|
/******************************************************************************
|
|
* Special for PPC405GP
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
* DMA
|
|
******************************************************************************/
|
|
#define DMA_DCR_BASE 0x100
|
|
#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
|
|
#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
|
|
#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */
|
|
#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */
|
|
#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */
|
|
#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
|
|
#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
|
|
#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */
|
|
#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */
|
|
#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */
|
|
#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
|
|
#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
|
|
#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */
|
|
#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */
|
|
#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */
|
|
#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */
|
|
#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */
|
|
#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */
|
|
#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */
|
|
#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */
|
|
#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
|
|
#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
|
|
#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
|
|
|
|
#ifndef CONFIG_405EP
|
|
/******************************************************************************
|
|
* Decompression Controller
|
|
******************************************************************************/
|
|
#define DECOMP_DCR_BASE 0x14
|
|
#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */
|
|
#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */
|
|
/* values for kiar register - indirect addressing of these regs */
|
|
#define kitor0 0x00 /* index table origin register 0 */
|
|
#define kitor1 0x01 /* index table origin register 1 */
|
|
#define kitor2 0x02 /* index table origin register 2 */
|
|
#define kitor3 0x03 /* index table origin register 3 */
|
|
#define kaddr0 0x04 /* address decode definition regsiter 0 */
|
|
#define kaddr1 0x05 /* address decode definition regsiter 1 */
|
|
#define kconf 0x40 /* decompression core config register */
|
|
#define kid 0x41 /* decompression core ID register */
|
|
#define kver 0x42 /* decompression core version # reg */
|
|
#define kpear 0x50 /* bus error addr reg (PLB addr) */
|
|
#define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/
|
|
#define kesr0 0x52 /* bus error status reg 0 (R/clear) */
|
|
#define kesr0s 0x53 /* bus error status reg 0 (set) */
|
|
/* There are 0x400 of the following registers, from krom0 to krom3ff*/
|
|
/* Only the first one is given here. */
|
|
#define krom0 0x400 /* SRAM/ROM read/write */
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Power Management
|
|
******************************************************************************/
|
|
#ifdef CONFIG_405EX
|
|
#define POWERMAN_DCR_BASE 0xb0
|
|
#else
|
|
#define POWERMAN_DCR_BASE 0xb8
|
|
#endif
|
|
#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
|
|
#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
|
|
#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
|
|
|
|
/******************************************************************************
|
|
* Extrnal Bus Controller
|
|
******************************************************************************/
|
|
/* values for ebccfga register - indirect addressing of these regs */
|
|
#define pb0cr 0x00 /* periph bank 0 config reg */
|
|
#define pb1cr 0x01 /* periph bank 1 config reg */
|
|
#define pb2cr 0x02 /* periph bank 2 config reg */
|
|
#define pb3cr 0x03 /* periph bank 3 config reg */
|
|
#define pb4cr 0x04 /* periph bank 4 config reg */
|
|
#ifndef CONFIG_405EP
|
|
#define pb5cr 0x05 /* periph bank 5 config reg */
|
|
#define pb6cr 0x06 /* periph bank 6 config reg */
|
|
#define pb7cr 0x07 /* periph bank 7 config reg */
|
|
#endif
|
|
#define pb0ap 0x10 /* periph bank 0 access parameters */
|
|
#define pb1ap 0x11 /* periph bank 1 access parameters */
|
|
#define pb2ap 0x12 /* periph bank 2 access parameters */
|
|
#define pb3ap 0x13 /* periph bank 3 access parameters */
|
|
#define pb4ap 0x14 /* periph bank 4 access parameters */
|
|
#ifndef CONFIG_405EP
|
|
#define pb5ap 0x15 /* periph bank 5 access parameters */
|
|
#define pb6ap 0x16 /* periph bank 6 access parameters */
|
|
#define pb7ap 0x17 /* periph bank 7 access parameters */
|
|
#endif
|
|
#define pbear 0x20 /* periph bus error addr reg */
|
|
#define pbesr0 0x21 /* periph bus error status reg 0 */
|
|
#define pbesr1 0x22 /* periph bus error status reg 1 */
|
|
#define epcr 0x23 /* external periph control reg */
|
|
#define EBC0_CFG 0x23 /* external bus configuration reg */
|
|
|
|
#ifdef CONFIG_405EP
|
|
/******************************************************************************
|
|
* Control
|
|
******************************************************************************/
|
|
#define CNTRL_DCR_BASE 0x0f0
|
|
#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */
|
|
#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */
|
|
#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */
|
|
#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */
|
|
#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */
|
|
#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */
|
|
|
|
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
|
|
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
|
|
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
|
|
#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/
|
|
#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
|
|
#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
|
|
#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
|
|
#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
|
|
#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
|
|
#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
|
|
|
|
/* Bit definitions */
|
|
#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */
|
|
#define PLLMR0_CPU_DIV_BYPASS 0x00000000
|
|
#define PLLMR0_CPU_DIV_2 0x00100000
|
|
#define PLLMR0_CPU_DIV_3 0x00200000
|
|
#define PLLMR0_CPU_DIV_4 0x00300000
|
|
|
|
#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */
|
|
#define PLLMR0_CPU_PLB_DIV_1 0x00000000
|
|
#define PLLMR0_CPU_PLB_DIV_2 0x00010000
|
|
#define PLLMR0_CPU_PLB_DIV_3 0x00020000
|
|
#define PLLMR0_CPU_PLB_DIV_4 0x00030000
|
|
|
|
#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */
|
|
#define PLLMR0_OPB_PLB_DIV_1 0x00000000
|
|
#define PLLMR0_OPB_PLB_DIV_2 0x00001000
|
|
#define PLLMR0_OPB_PLB_DIV_3 0x00002000
|
|
#define PLLMR0_OPB_PLB_DIV_4 0x00003000
|
|
|
|
#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
|
|
#define PLLMR0_EXB_PLB_DIV_2 0x00000000
|
|
#define PLLMR0_EXB_PLB_DIV_3 0x00000100
|
|
#define PLLMR0_EXB_PLB_DIV_4 0x00000200
|
|
#define PLLMR0_EXB_PLB_DIV_5 0x00000300
|
|
|
|
#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
|
|
#define PLLMR0_MAL_PLB_DIV_1 0x00000000
|
|
#define PLLMR0_MAL_PLB_DIV_2 0x00000010
|
|
#define PLLMR0_MAL_PLB_DIV_3 0x00000020
|
|
#define PLLMR0_MAL_PLB_DIV_4 0x00000030
|
|
|
|
#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */
|
|
#define PLLMR0_PCI_PLB_DIV_1 0x00000000
|
|
#define PLLMR0_PCI_PLB_DIV_2 0x00000001
|
|
#define PLLMR0_PCI_PLB_DIV_3 0x00000002
|
|
#define PLLMR0_PCI_PLB_DIV_4 0x00000003
|
|
|
|
#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */
|
|
#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */
|
|
#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
|
|
#define PLLMR1_FBMUL_DIV_16 0x00000000
|
|
#define PLLMR1_FBMUL_DIV_1 0x00100000
|
|
#define PLLMR1_FBMUL_DIV_2 0x00200000
|
|
#define PLLMR1_FBMUL_DIV_3 0x00300000
|
|
#define PLLMR1_FBMUL_DIV_4 0x00400000
|
|
#define PLLMR1_FBMUL_DIV_5 0x00500000
|
|
#define PLLMR1_FBMUL_DIV_6 0x00600000
|
|
#define PLLMR1_FBMUL_DIV_7 0x00700000
|
|
#define PLLMR1_FBMUL_DIV_8 0x00800000
|
|
#define PLLMR1_FBMUL_DIV_9 0x00900000
|
|
#define PLLMR1_FBMUL_DIV_10 0x00A00000
|
|
#define PLLMR1_FBMUL_DIV_11 0x00B00000
|
|
#define PLLMR1_FBMUL_DIV_12 0x00C00000
|
|
#define PLLMR1_FBMUL_DIV_13 0x00D00000
|
|
#define PLLMR1_FBMUL_DIV_14 0x00E00000
|
|
#define PLLMR1_FBMUL_DIV_15 0x00F00000
|
|
|
|
#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
|
|
#define PLLMR1_FWDVA_DIV_8 0x00000000
|
|
#define PLLMR1_FWDVA_DIV_7 0x00010000
|
|
#define PLLMR1_FWDVA_DIV_6 0x00020000
|
|
#define PLLMR1_FWDVA_DIV_5 0x00030000
|
|
#define PLLMR1_FWDVA_DIV_4 0x00040000
|
|
#define PLLMR1_FWDVA_DIV_3 0x00050000
|
|
#define PLLMR1_FWDVA_DIV_2 0x00060000
|
|
#define PLLMR1_FWDVA_DIV_1 0x00070000
|
|
#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
|
|
#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
|
|
|
|
/* Defines for CPC0_EPRCSR register */
|
|
#define CPC0_EPRCSR_E0NFE 0x80000000
|
|
#define CPC0_EPRCSR_E1NFE 0x40000000
|
|
#define CPC0_EPRCSR_E1RPP 0x00000080
|
|
#define CPC0_EPRCSR_E0RPP 0x00000040
|
|
#define CPC0_EPRCSR_E1ERP 0x00000020
|
|
#define CPC0_EPRCSR_E0ERP 0x00000010
|
|
#define CPC0_EPRCSR_E1PCI 0x00000002
|
|
#define CPC0_EPRCSR_E0PCI 0x00000001
|
|
|
|
/* Defines for CPC0_PCI Register */
|
|
#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
|
|
#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
|
|
#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled*/
|
|
|
|
/* Defines for CPC0_BOOR Register */
|
|
#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
|
|
|
|
/* Defines for CPC0_PLLMR1 Register fields */
|
|
#define PLL_ACTIVE 0x80000000
|
|
#define CPC0_PLLMR1_SSCS 0x80000000
|
|
#define PLL_RESET 0x40000000
|
|
#define CPC0_PLLMR1_PLLR 0x40000000
|
|
/* Feedback multiplier */
|
|
#define PLL_FBKDIV 0x00F00000
|
|
#define CPC0_PLLMR1_FBDV 0x00F00000
|
|
#define PLL_FBKDIV_16 0x00000000
|
|
#define PLL_FBKDIV_1 0x00100000
|
|
#define PLL_FBKDIV_2 0x00200000
|
|
#define PLL_FBKDIV_3 0x00300000
|
|
#define PLL_FBKDIV_4 0x00400000
|
|
#define PLL_FBKDIV_5 0x00500000
|
|
#define PLL_FBKDIV_6 0x00600000
|
|
#define PLL_FBKDIV_7 0x00700000
|
|
#define PLL_FBKDIV_8 0x00800000
|
|
#define PLL_FBKDIV_9 0x00900000
|
|
#define PLL_FBKDIV_10 0x00A00000
|
|
#define PLL_FBKDIV_11 0x00B00000
|
|
#define PLL_FBKDIV_12 0x00C00000
|
|
#define PLL_FBKDIV_13 0x00D00000
|
|
#define PLL_FBKDIV_14 0x00E00000
|
|
#define PLL_FBKDIV_15 0x00F00000
|
|
/* Forward A divisor */
|
|
#define PLL_FWDDIVA 0x00070000
|
|
#define CPC0_PLLMR1_FWDVA 0x00070000
|
|
#define PLL_FWDDIVA_8 0x00000000
|
|
#define PLL_FWDDIVA_7 0x00010000
|
|
#define PLL_FWDDIVA_6 0x00020000
|
|
#define PLL_FWDDIVA_5 0x00030000
|
|
#define PLL_FWDDIVA_4 0x00040000
|
|
#define PLL_FWDDIVA_3 0x00050000
|
|
#define PLL_FWDDIVA_2 0x00060000
|
|
#define PLL_FWDDIVA_1 0x00070000
|
|
/* Forward B divisor */
|
|
#define PLL_FWDDIVB 0x00007000
|
|
#define CPC0_PLLMR1_FWDVB 0x00007000
|
|
#define PLL_FWDDIVB_8 0x00000000
|
|
#define PLL_FWDDIVB_7 0x00001000
|
|
#define PLL_FWDDIVB_6 0x00002000
|
|
#define PLL_FWDDIVB_5 0x00003000
|
|
#define PLL_FWDDIVB_4 0x00004000
|
|
#define PLL_FWDDIVB_3 0x00005000
|
|
#define PLL_FWDDIVB_2 0x00006000
|
|
#define PLL_FWDDIVB_1 0x00007000
|
|
/* PLL tune bits */
|
|
#define PLL_TUNE_MASK 0x000003FF
|
|
#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
|
|
#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
|
|
#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
|
|
#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
|
|
#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
|
|
#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
|
|
#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
|
|
|
|
/* Defines for CPC0_PLLMR0 Register fields */
|
|
/* CPU divisor */
|
|
#define PLL_CPUDIV 0x00300000
|
|
#define CPC0_PLLMR0_CCDV 0x00300000
|
|
#define PLL_CPUDIV_1 0x00000000
|
|
#define PLL_CPUDIV_2 0x00100000
|
|
#define PLL_CPUDIV_3 0x00200000
|
|
#define PLL_CPUDIV_4 0x00300000
|
|
/* PLB divisor */
|
|
#define PLL_PLBDIV 0x00030000
|
|
#define CPC0_PLLMR0_CBDV 0x00030000
|
|
#define PLL_PLBDIV_1 0x00000000
|
|
#define PLL_PLBDIV_2 0x00010000
|
|
#define PLL_PLBDIV_3 0x00020000
|
|
#define PLL_PLBDIV_4 0x00030000
|
|
/* OPB divisor */
|
|
#define PLL_OPBDIV 0x00003000
|
|
#define CPC0_PLLMR0_OPDV 0x00003000
|
|
#define PLL_OPBDIV_1 0x00000000
|
|
#define PLL_OPBDIV_2 0x00001000
|
|
#define PLL_OPBDIV_3 0x00002000
|
|
#define PLL_OPBDIV_4 0x00003000
|
|
/* EBC divisor */
|
|
#define PLL_EXTBUSDIV 0x00000300
|
|
#define CPC0_PLLMR0_EPDV 0x00000300
|
|
#define PLL_EXTBUSDIV_2 0x00000000
|
|
#define PLL_EXTBUSDIV_3 0x00000100
|
|
#define PLL_EXTBUSDIV_4 0x00000200
|
|
#define PLL_EXTBUSDIV_5 0x00000300
|
|
/* MAL divisor */
|
|
#define PLL_MALDIV 0x00000030
|
|
#define CPC0_PLLMR0_MPDV 0x00000030
|
|
#define PLL_MALDIV_1 0x00000000
|
|
#define PLL_MALDIV_2 0x00000010
|
|
#define PLL_MALDIV_3 0x00000020
|
|
#define PLL_MALDIV_4 0x00000030
|
|
/* PCI divisor */
|
|
#define PLL_PCIDIV 0x00000003
|
|
#define CPC0_PLLMR0_PPFD 0x00000003
|
|
#define PLL_PCIDIV_1 0x00000000
|
|
#define PLL_PCIDIV_2 0x00000001
|
|
#define PLL_PCIDIV_3 0x00000002
|
|
#define PLL_PCIDIV_4 0x00000003
|
|
|
|
/*
|
|
*-------------------------------------------------------------------------------
|
|
* PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
|
|
* assuming a 33.3MHz input clock to the 405EP.
|
|
*-------------------------------------------------------------------------------
|
|
*/
|
|
#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_4)
|
|
#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \
|
|
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
|
|
|
|
#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_4)
|
|
#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \
|
|
PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
|
|
#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_4)
|
|
#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
|
|
PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
|
|
#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_4)
|
|
#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \
|
|
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
|
|
#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_2)
|
|
#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
|
|
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
|
|
#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_3)
|
|
#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
|
|
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
|
|
#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
|
|
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
|
|
PLL_MALDIV_1 | PLL_PCIDIV_1)
|
|
#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
|
|
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
|
|
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
|
|
|
|
/*
|
|
* PLL Voltage Controlled Oscillator (VCO) definitions
|
|
* Maximum and minimum values (in MHz) for correct PLL operation.
|
|
*/
|
|
#define VCO_MIN 500
|
|
#define VCO_MAX 1000
|
|
#elif defined(CONFIG_405EZ)
|
|
#define sdrnand0 0x4000
|
|
#define sdrultra0 0x4040
|
|
#define sdrultra1 0x4050
|
|
#define sdricintstat 0x4510
|
|
|
|
#define SDR_NAND0_NDEN 0x80000000
|
|
#define SDR_NAND0_NDBTEN 0x40000000
|
|
#define SDR_NAND0_NDBADR_MASK 0x30000000
|
|
#define SDR_NAND0_NDBPG_MASK 0x0f000000
|
|
#define SDR_NAND0_NDAREN 0x00800000
|
|
#define SDR_NAND0_NDRBEN 0x00400000
|
|
|
|
#define SDR_ULTRA0_NDGPIOBP 0x80000000
|
|
#define SDR_ULTRA0_CSN_MASK 0x78000000
|
|
#define SDR_ULTRA0_CSNSEL0 0x40000000
|
|
#define SDR_ULTRA0_CSNSEL1 0x20000000
|
|
#define SDR_ULTRA0_CSNSEL2 0x10000000
|
|
#define SDR_ULTRA0_CSNSEL3 0x08000000
|
|
#define SDR_ULTRA0_EBCRDYEN 0x04000000
|
|
#define SDR_ULTRA0_SPISSINEN 0x02000000
|
|
#define SDR_ULTRA0_NFSRSTEN 0x01000000
|
|
|
|
#define SDR_ULTRA1_LEDNENABLE 0x40000000
|
|
|
|
#define SDR_ICRX_STAT 0x80000000
|
|
#define SDR_ICTX0_STAT 0x40000000
|
|
#define SDR_ICTX1_STAT 0x20000000
|
|
|
|
#define SDR_PINSTP 0x40
|
|
|
|
/******************************************************************************
|
|
* Control
|
|
******************************************************************************/
|
|
/* CPR Registers */
|
|
#define cprclkupd 0x020 /* CPR_CLKUPD */
|
|
#define cprpllc 0x040 /* CPR_PLLC */
|
|
#define cprplld 0x060 /* CPR_PLLD */
|
|
#define cprprimad 0x080 /* CPR_PRIMAD */
|
|
#define cprperd0 0x0e0 /* CPR_PERD0 */
|
|
#define cprperd1 0x0e1 /* CPR_PERD1 */
|
|
#define cprperc0 0x180 /* CPR_PERC0 */
|
|
#define cprmisc0 0x181 /* CPR_MISC0 */
|
|
#define cprmisc1 0x182 /* CPR_MISC1 */
|
|
|
|
#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
|
|
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
|
|
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
|
|
|
|
#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
|
|
|
|
#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
|
|
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
|
|
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
|
|
|
|
#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
|
|
#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
|
|
#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
|
|
#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
|
|
|
|
#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
|
|
#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
|
|
#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
|
|
#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
|
|
|
|
#else /* #ifdef CONFIG_405EP */
|
|
/******************************************************************************
|
|
* Control
|
|
******************************************************************************/
|
|
#define CNTRL_DCR_BASE 0x0b0
|
|
#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */
|
|
#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
|
|
#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
|
|
#define reset (CNTRL_DCR_BASE+0x3) /* reset register */
|
|
#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
|
|
|
|
#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* chip control register 0 */
|
|
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* chip control register 1 */
|
|
#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* chip pin strapping register */
|
|
|
|
/* CPC0_ECR/CPC0_EIRR: PPC405GPr only */
|
|
#define CPC0_EIRR (CNTRL_DCR_BASE+0x6) /* external interrupt routing register */
|
|
#define CPC0_ECR (0xaa) /* edge conditioner register */
|
|
|
|
#define ecr (0xaa) /* edge conditioner register (405gpr) */
|
|
|
|
/* Bit definitions */
|
|
#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
|
|
#define PLLMR_FWD_DIV_BYPASS 0xE0000000
|
|
#define PLLMR_FWD_DIV_3 0xA0000000
|
|
#define PLLMR_FWD_DIV_4 0x80000000
|
|
#define PLLMR_FWD_DIV_6 0x40000000
|
|
|
|
#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
|
|
#define PLLMR_FB_DIV_1 0x02000000
|
|
#define PLLMR_FB_DIV_2 0x04000000
|
|
#define PLLMR_FB_DIV_3 0x06000000
|
|
#define PLLMR_FB_DIV_4 0x08000000
|
|
|
|
#define PLLMR_TUNING_MASK 0x01F80000
|
|
|
|
#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
|
|
#define PLLMR_CPU_PLB_DIV_1 0x00000000
|
|
#define PLLMR_CPU_PLB_DIV_2 0x00020000
|
|
#define PLLMR_CPU_PLB_DIV_3 0x00040000
|
|
#define PLLMR_CPU_PLB_DIV_4 0x00060000
|
|
|
|
#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
|
|
#define PLLMR_OPB_PLB_DIV_1 0x00000000
|
|
#define PLLMR_OPB_PLB_DIV_2 0x00008000
|
|
#define PLLMR_OPB_PLB_DIV_3 0x00010000
|
|
#define PLLMR_OPB_PLB_DIV_4 0x00018000
|
|
|
|
#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
|
|
#define PLLMR_PCI_PLB_DIV_1 0x00000000
|
|
#define PLLMR_PCI_PLB_DIV_2 0x00002000
|
|
#define PLLMR_PCI_PLB_DIV_3 0x00004000
|
|
#define PLLMR_PCI_PLB_DIV_4 0x00006000
|
|
|
|
#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
|
|
#define PLLMR_EXB_PLB_DIV_2 0x00000000
|
|
#define PLLMR_EXB_PLB_DIV_3 0x00000800
|
|
#define PLLMR_EXB_PLB_DIV_4 0x00001000
|
|
#define PLLMR_EXB_PLB_DIV_5 0x00001800
|
|
|
|
/* definitions for PPC405GPr (new mode strapping) */
|
|
#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
|
|
|
|
#define PSR_PLL_FWD_MASK 0xC0000000
|
|
#define PSR_PLL_FDBACK_MASK 0x30000000
|
|
#define PSR_PLL_TUNING_MASK 0x0E000000
|
|
#define PSR_PLB_CPU_MASK 0x01800000
|
|
#define PSR_OPB_PLB_MASK 0x00600000
|
|
#define PSR_PCI_PLB_MASK 0x00180000
|
|
#define PSR_EB_PLB_MASK 0x00060000
|
|
#define PSR_ROM_WIDTH_MASK 0x00018000
|
|
#define PSR_ROM_LOC 0x00004000
|
|
#define PSR_PCI_ASYNC_EN 0x00001000
|
|
#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
|
|
#define PSR_PCI_ARBIT_EN 0x00000400
|
|
#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
|
|
|
|
#ifndef CONFIG_IOP480
|
|
/*
|
|
* PLL Voltage Controlled Oscillator (VCO) definitions
|
|
* Maximum and minimum values (in MHz) for correct PLL operation.
|
|
*/
|
|
#define VCO_MIN 400
|
|
#define VCO_MAX 800
|
|
#endif /* #ifndef CONFIG_IOP480 */
|
|
#endif /* #ifdef CONFIG_405EP */
|
|
|
|
/******************************************************************************
|
|
* Memory Access Layer
|
|
******************************************************************************/
|
|
#if defined(CONFIG_405EZ)
|
|
#define MAL_DCR_BASE 0x380
|
|
#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
|
|
#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/
|
|
#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
|
|
#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
|
|
#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/
|
|
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
|
|
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
|
|
#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
|
|
/* 0x08-0x0F Reserved */
|
|
#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/
|
|
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
|
|
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
|
|
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
|
|
/* 0x14-0x1F Reserved */
|
|
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */
|
|
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */
|
|
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */
|
|
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */
|
|
#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */
|
|
#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */
|
|
#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */
|
|
#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */
|
|
#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */
|
|
#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */
|
|
#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */
|
|
#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */
|
|
#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */
|
|
#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */
|
|
#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */
|
|
#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */
|
|
#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */
|
|
#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */
|
|
#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */
|
|
#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */
|
|
#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */
|
|
#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */
|
|
#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */
|
|
#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */
|
|
#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */
|
|
#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */
|
|
#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */
|
|
#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */
|
|
#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */
|
|
#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */
|
|
#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */
|
|
#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */
|
|
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */
|
|
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */
|
|
#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */
|
|
#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */
|
|
#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */
|
|
#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */
|
|
#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */
|
|
#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */
|
|
#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */
|
|
#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */
|
|
#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */
|
|
#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */
|
|
#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */
|
|
#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */
|
|
#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */
|
|
#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */
|
|
#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */
|
|
#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */
|
|
#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */
|
|
#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */
|
|
#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */
|
|
#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */
|
|
#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */
|
|
#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */
|
|
#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */
|
|
#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */
|
|
#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */
|
|
#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */
|
|
#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */
|
|
#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */
|
|
#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */
|
|
#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */
|
|
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
|
|
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
|
|
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
|
|
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
|
|
#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */
|
|
#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */
|
|
#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */
|
|
#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */
|
|
#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */
|
|
#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */
|
|
#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */
|
|
#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */
|
|
#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */
|
|
#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */
|
|
#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */
|
|
#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */
|
|
#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */
|
|
#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */
|
|
#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */
|
|
#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */
|
|
#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */
|
|
#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */
|
|
#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */
|
|
#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */
|
|
#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */
|
|
#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */
|
|
#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */
|
|
#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */
|
|
#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */
|
|
#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */
|
|
#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */
|
|
#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */
|
|
|
|
#else /* !defined(CONFIG_405EZ) */
|
|
|
|
#define MAL_DCR_BASE 0x180
|
|
#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
|
|
#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
|
|
#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
|
|
#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
|
|
#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
|
|
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
|
|
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
|
|
#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
|
|
#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
|
|
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
|
|
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
|
|
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
|
|
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
|
|
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
|
|
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
|
|
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
|
|
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
|
|
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
|
|
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
|
|
#endif /* defined(CONFIG_405EZ) */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| IIC Register Offsets
|
|
'----------------------------------------------------------------------------*/
|
|
#define IICMDBUF 0x00
|
|
#define IICSDBUF 0x02
|
|
#define IICLMADR 0x04
|
|
#define IICHMADR 0x05
|
|
#define IICCNTL 0x06
|
|
#define IICMDCNTL 0x07
|
|
#define IICSTS 0x08
|
|
#define IICEXTSTS 0x09
|
|
#define IICLSADR 0x0A
|
|
#define IICHSADR 0x0B
|
|
#define IICCLKDIV 0x0C
|
|
#define IICINTRMSK 0x0D
|
|
#define IICXFRCNT 0x0E
|
|
#define IICXTCNTLSS 0x0F
|
|
#define IICDIRECTCNTL 0x10
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| UART Register Offsets
|
|
'----------------------------------------------------------------------------*/
|
|
#define DATA_REG 0x00
|
|
#define DL_LSB 0x00
|
|
#define DL_MSB 0x01
|
|
#define INT_ENABLE 0x01
|
|
#define FIFO_CONTROL 0x02
|
|
#define LINE_CONTROL 0x03
|
|
#define MODEM_CONTROL 0x04
|
|
#define LINE_STATUS 0x05
|
|
#define MODEM_STATUS 0x06
|
|
#define SCRATCH 0x07
|
|
|
|
/******************************************************************************
|
|
* On Chip Memory
|
|
******************************************************************************/
|
|
#if defined(CONFIG_405EZ)
|
|
#define OCM_DCR_BASE 0x020
|
|
#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */
|
|
#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */
|
|
#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */
|
|
#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */
|
|
#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */
|
|
#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */
|
|
#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */
|
|
#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */
|
|
#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */
|
|
#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */
|
|
#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */
|
|
#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */
|
|
#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/
|
|
#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/
|
|
#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/
|
|
#else
|
|
#define OCM_DCR_BASE 0x018
|
|
#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */
|
|
#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
|
|
#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */
|
|
#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */
|
|
#endif /* CONFIG_405EZ */
|
|
|
|
/******************************************************************************
|
|
* GPIO macro register defines
|
|
******************************************************************************/
|
|
#if defined(CONFIG_405EZ)
|
|
/* Only the 405EZ has 2 GPIOs */
|
|
#define GPIO_BASE 0xEF600700
|
|
#define GPIO0_OR (GPIO_BASE+0x0)
|
|
#define GPIO0_TCR (GPIO_BASE+0x4)
|
|
#define GPIO0_OSRL (GPIO_BASE+0x8)
|
|
#define GPIO0_OSRH (GPIO_BASE+0xC)
|
|
#define GPIO0_TSRL (GPIO_BASE+0x10)
|
|
#define GPIO0_TSRH (GPIO_BASE+0x14)
|
|
#define GPIO0_ODR (GPIO_BASE+0x18)
|
|
#define GPIO0_IR (GPIO_BASE+0x1C)
|
|
#define GPIO0_RR1 (GPIO_BASE+0x20)
|
|
#define GPIO0_RR2 (GPIO_BASE+0x24)
|
|
#define GPIO0_RR3 (GPIO_BASE+0x28)
|
|
#define GPIO0_ISR1L (GPIO_BASE+0x30)
|
|
#define GPIO0_ISR1H (GPIO_BASE+0x34)
|
|
#define GPIO0_ISR2L (GPIO_BASE+0x38)
|
|
#define GPIO0_ISR2H (GPIO_BASE+0x3C)
|
|
#define GPIO0_ISR3L (GPIO_BASE+0x40)
|
|
#define GPIO0_ISR3H (GPIO_BASE+0x44)
|
|
|
|
#define GPIO1_BASE 0xEF600800
|
|
#define GPIO1_OR (GPIO1_BASE+0x0)
|
|
#define GPIO1_TCR (GPIO1_BASE+0x4)
|
|
#define GPIO1_OSRL (GPIO1_BASE+0x8)
|
|
#define GPIO1_OSRH (GPIO1_BASE+0xC)
|
|
#define GPIO1_TSRL (GPIO1_BASE+0x10)
|
|
#define GPIO1_TSRH (GPIO1_BASE+0x14)
|
|
#define GPIO1_ODR (GPIO1_BASE+0x18)
|
|
#define GPIO1_IR (GPIO1_BASE+0x1C)
|
|
#define GPIO1_RR1 (GPIO1_BASE+0x20)
|
|
#define GPIO1_RR2 (GPIO1_BASE+0x24)
|
|
#define GPIO1_RR3 (GPIO1_BASE+0x28)
|
|
#define GPIO1_ISR1L (GPIO1_BASE+0x30)
|
|
#define GPIO1_ISR1H (GPIO1_BASE+0x34)
|
|
#define GPIO1_ISR2L (GPIO1_BASE+0x38)
|
|
#define GPIO1_ISR2H (GPIO1_BASE+0x3C)
|
|
#define GPIO1_ISR3L (GPIO1_BASE+0x40)
|
|
#define GPIO1_ISR3H (GPIO1_BASE+0x44)
|
|
|
|
#elif defined(CONFIG_405EX)
|
|
#define GPIO_BASE 0xEF600800
|
|
#define GPIO0_OR (GPIO_BASE+0x0)
|
|
#define GPIO0_TCR (GPIO_BASE+0x4)
|
|
#define GPIO0_OSRL (GPIO_BASE+0x8)
|
|
#define GPIO0_OSRH (GPIO_BASE+0xC)
|
|
#define GPIO0_TSRL (GPIO_BASE+0x10)
|
|
#define GPIO0_TSRH (GPIO_BASE+0x14)
|
|
#define GPIO0_ODR (GPIO_BASE+0x18)
|
|
#define GPIO0_IR (GPIO_BASE+0x1C)
|
|
#define GPIO0_RR1 (GPIO_BASE+0x20)
|
|
#define GPIO0_RR2 (GPIO_BASE+0x24)
|
|
#define GPIO0_ISR1L (GPIO_BASE+0x30)
|
|
#define GPIO0_ISR1H (GPIO_BASE+0x34)
|
|
#define GPIO0_ISR2L (GPIO_BASE+0x38)
|
|
#define GPIO0_ISR2H (GPIO_BASE+0x3C)
|
|
#define GPIO0_ISR3L (GPIO_BASE+0x40)
|
|
#define GPIO0_ISR3H (GPIO_BASE+0x44)
|
|
|
|
#else /* !405EZ */
|
|
|
|
#define GPIO_BASE 0xEF600700
|
|
#define GPIO0_OR (GPIO_BASE+0x0)
|
|
#define GPIO0_TCR (GPIO_BASE+0x4)
|
|
#define GPIO0_OSRH (GPIO_BASE+0x8)
|
|
#define GPIO0_OSRL (GPIO_BASE+0xC)
|
|
#define GPIO0_TSRH (GPIO_BASE+0x10)
|
|
#define GPIO0_TSRL (GPIO_BASE+0x14)
|
|
#define GPIO0_ODR (GPIO_BASE+0x18)
|
|
#define GPIO0_IR (GPIO_BASE+0x1C)
|
|
#define GPIO0_RR1 (GPIO_BASE+0x20)
|
|
#define GPIO0_RR2 (GPIO_BASE+0x24)
|
|
#define GPIO0_ISR1H (GPIO_BASE+0x30)
|
|
#define GPIO0_ISR1L (GPIO_BASE+0x34)
|
|
#define GPIO0_ISR2H (GPIO_BASE+0x38)
|
|
#define GPIO0_ISR2L (GPIO_BASE+0x3C)
|
|
|
|
#endif /* CONFIG_405EZ */
|
|
|
|
#define GPIO0_BASE GPIO_BASE
|
|
|
|
#if defined(CONFIG_405EX)
|
|
#define SDR0_SRST 0x0200
|
|
|
|
/*
|
|
* Software Reset Register
|
|
*/
|
|
#define SDR0_SRST_BGO PPC_REG_VAL(0, 1)
|
|
#define SDR0_SRST_PLB4 PPC_REG_VAL(1, 1)
|
|
#define SDR0_SRST_EBC PPC_REG_VAL(2, 1)
|
|
#define SDR0_SRST_OPB PPC_REG_VAL(3, 1)
|
|
#define SDR0_SRST_UART0 PPC_REG_VAL(4, 1)
|
|
#define SDR0_SRST_UART1 PPC_REG_VAL(5, 1)
|
|
#define SDR0_SRST_IIC0 PPC_REG_VAL(6, 1)
|
|
#define SDR0_SRST_BGI PPC_REG_VAL(7, 1)
|
|
#define SDR0_SRST_GPIO PPC_REG_VAL(8, 1)
|
|
#define SDR0_SRST_GPT PPC_REG_VAL(9, 1)
|
|
#define SDR0_SRST_DMC PPC_REG_VAL(10, 1)
|
|
#define SDR0_SRST_RGMII PPC_REG_VAL(11, 1)
|
|
#define SDR0_SRST_EMAC0 PPC_REG_VAL(12, 1)
|
|
#define SDR0_SRST_EMAC1 PPC_REG_VAL(13, 1)
|
|
#define SDR0_SRST_CPM PPC_REG_VAL(14, 1)
|
|
#define SDR0_SRST_EPLL PPC_REG_VAL(15, 1)
|
|
#define SDR0_SRST_UIC PPC_REG_VAL(16, 1)
|
|
#define SDR0_SRST_UPRST PPC_REG_VAL(17, 1)
|
|
#define SDR0_SRST_IIC1 PPC_REG_VAL(18, 1)
|
|
#define SDR0_SRST_SCP PPC_REG_VAL(19, 1)
|
|
#define SDR0_SRST_UHRST PPC_REG_VAL(20, 1)
|
|
#define SDR0_SRST_DMA PPC_REG_VAL(21, 1)
|
|
#define SDR0_SRST_DMAC PPC_REG_VAL(22, 1)
|
|
#define SDR0_SRST_MAL PPC_REG_VAL(23, 1)
|
|
#define SDR0_SRST_EBM PPC_REG_VAL(24, 1)
|
|
#define SDR0_SRST_GPTR PPC_REG_VAL(25, 1)
|
|
#define SDR0_SRST_PE0 PPC_REG_VAL(26, 1)
|
|
#define SDR0_SRST_PE1 PPC_REG_VAL(27, 1)
|
|
#define SDR0_SRST_CRYP PPC_REG_VAL(28, 1)
|
|
#define SDR0_SRST_PKP PPC_REG_VAL(29, 1)
|
|
#define SDR0_SRST_AHB PPC_REG_VAL(30, 1)
|
|
#define SDR0_SRST_NDFC PPC_REG_VAL(31, 1)
|
|
|
|
#define sdr_uart0 0x0120 /* UART0 Config */
|
|
#define sdr_uart1 0x0121 /* UART1 Config */
|
|
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
|
|
|
|
/* Defines for CPC0_EPRCSR register */
|
|
#define CPC0_EPRCSR_E0NFE 0x80000000
|
|
#define CPC0_EPRCSR_E1NFE 0x40000000
|
|
#define CPC0_EPRCSR_E1RPP 0x00000080
|
|
#define CPC0_EPRCSR_E0RPP 0x00000040
|
|
#define CPC0_EPRCSR_E1ERP 0x00000020
|
|
#define CPC0_EPRCSR_E0ERP 0x00000010
|
|
#define CPC0_EPRCSR_E1PCI 0x00000002
|
|
#define CPC0_EPRCSR_E0PCI 0x00000001
|
|
|
|
#define cpr0_clkupd 0x020
|
|
#define cpr0_pllc 0x040
|
|
#define cpr0_plld 0x060
|
|
#define cpr0_cpud 0x080
|
|
#define cpr0_plbd 0x0a0
|
|
#define cpr0_opbd 0x0c0
|
|
#define cpr0_perd 0x0e0
|
|
#define cpr0_ahbd 0x100
|
|
#define cpr0_icfg 0x140
|
|
|
|
#define SDR_PINSTP 0x0040
|
|
#define sdr_sdcs 0x0060
|
|
|
|
#define SDR0_SDCS_SDD (0x80000000 >> 31)
|
|
|
|
/* CUST0 Customer Configuration Register0 */
|
|
#define SDR0_CUST0 0x4000
|
|
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
|
|
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
|
|
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
|
|
#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
|
|
|
|
#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
|
|
#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
|
|
#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
|
|
|
|
#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
|
|
#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
|
|
#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
|
|
|
|
#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
|
|
#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
|
|
#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
|
|
|
#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
|
|
#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
|
|
#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
|
|
|
|
#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
|
|
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
|
|
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
|
|
|
|
#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
|
|
#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
|
|
#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
|
|
|
|
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
|
|
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
|
|
#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
|
|
|
|
#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
|
|
#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
|
|
#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
|
|
|
|
#define SDR0_PFC0 0x4100
|
|
#define SDR0_PFC1 0x4101
|
|
#define SDR0_PFC1_U1ME 0x02000000
|
|
#define SDR0_PFC1_U0ME 0x00080000
|
|
#define SDR0_PFC1_U0IM 0x00040000
|
|
#define SDR0_PFC1_SIS 0x00020000
|
|
#define SDR0_PFC1_DMAAEN 0x00010000
|
|
#define SDR0_PFC1_DMADEN 0x00008000
|
|
#define SDR0_PFC1_USBEN 0x00004000
|
|
#define SDR0_PFC1_AHBSWAP 0x00000020
|
|
#define SDR0_PFC1_USBBIGEN 0x00000010
|
|
#define SDR0_PFC1_GPT_FREQ 0x0000000f
|
|
#endif
|
|
|
|
/* General Purpose Timer (GPT) Register Offsets */
|
|
#define GPT0_TBC 0x00000000
|
|
#define GPT0_IM 0x00000018
|
|
#define GPT0_ISS 0x0000001C
|
|
#define GPT0_ISC 0x00000020
|
|
#define GPT0_IE 0x00000024
|
|
#define GPT0_COMP0 0x00000080
|
|
#define GPT0_COMP1 0x00000084
|
|
#define GPT0_COMP2 0x00000088
|
|
#define GPT0_COMP3 0x0000008C
|
|
#define GPT0_COMP4 0x00000090
|
|
#define GPT0_COMP5 0x00000094
|
|
#define GPT0_COMP6 0x00000098
|
|
#define GPT0_MASK0 0x000000C0
|
|
#define GPT0_MASK1 0x000000C4
|
|
#define GPT0_MASK2 0x000000C8
|
|
#define GPT0_MASK3 0x000000CC
|
|
#define GPT0_MASK4 0x000000D0
|
|
#define GPT0_MASK5 0x000000D4
|
|
#define GPT0_MASK6 0x000000D8
|
|
#define GPT0_DCT0 0x00000110
|
|
#define GPT0_DCIS 0x0000011C
|
|
|
|
#endif /* __PPC405_H__ */
|