rtt-f030/bsp/nuvoton_m05x/Libraries/StdDriver/inc/fmc.h

334 lines
13 KiB
C

/**************************************************************************//**
* @file FMC.h
* @version V3.0
* $Revision: 13 $
* $Date: 14/01/28 10:49a $
* @brief M051 Series Flash Memory Controller Driver Header File
*
* @note
* Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved.
*
******************************************************************************/
#ifndef __FMC_H__
#define __FMC_H__
#include "M051Series.h"
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup M051_Device_Driver M051 Device Driver
@{
*/
/** @addtogroup M051_FMC_Driver FMC Driver
@{
*/
/** @addtogroup M051_FMC_EXPORTED_CONSTANTS FMC Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* Define Base Address */
/*---------------------------------------------------------------------------------------------------------*/
#define FMC_APROM_BASE 0x00000000UL /*!< APROM Base Address */
#define FMC_LDROM_BASE 0x00100000UL /*!< LDROM Base Address */
#define FMC_CONFIG_BASE 0x00300000UL /*!< CONFIG Base Address */
#define FMC_FLASH_PAGE_SIZE 0x200 /*!< Flash Page Size (512 Bytes) */
#define FMC_LDROM_SIZE 0x1000 /*!< LDROM Size (4 KBytes) */
/*---------------------------------------------------------------------------------------------------------*/
/* ISPCON constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define FMC_ISPCON_BS_LDROM 0x2 /*!< ISPCON setting to select to boot from LDROM */
#define FMC_ISPCON_BS_APROM 0x0 /*!< ISPCON setting to select to boot from APROM */
/*---------------------------------------------------------------------------------------------------------*/
/* ISPCMD constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define FMC_ISPCMD_READ 0x00 /*!< ISP Command: Read Flash */
#define FMC_ISPCMD_PROGRAM 0x21 /*!< ISP Command: Program Flash */
#define FMC_ISPCMD_PAGE_ERASE 0x22 /*!< ISP Command: Page Erase Flash */
#define FMC_ISPCMD_VECMAP 0x2e /*!< ISP Command: Set VECMAP */
#define FMC_ISPCMD_READ_UID 0x04 /*!< ISP Command: Read Unique ID */
#define FMC_ISPCMD_READ_CID 0x0B /*!< ISP Command: Read Company ID */
#define FMC_ISPCMD_READ_DID 0x0C /*!< ISP Command: Read Device ID */
/*@}*/ /* end of group M051_FMC_EXPORTED_CONSTANTS */
/** @addtogroup M051_FMC_EXPORTED_FUNCTIONS FMC Exported Functions
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* FMC Macro Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define FMC_ENABLE_ISP() (FMC->ISPCON |= FMC_ISPCON_ISPEN_Msk) /*!< Enable ISP Function */
#define FMC_DISABLE_ISP() (FMC->ISPCON &= ~FMC_ISPCON_ISPEN_Msk) /*!< Disable ISP Function */
#define FMC_ENABLE_LD_UPDATE() (FMC->ISPCON |= FMC_ISPCON_LDUEN_Msk) /*!< Enable LDROM Update Function */
#define FMC_DISABLE_LD_UPDATE() (FMC->ISPCON &= ~FMC_ISPCON_LDUEN_Msk) /*!< Disable LDROM Update Function */
#define FMC_ENABLE_CFG_UPDATE() (FMC->ISPCON |= FMC_ISPCON_CFGUEN_Msk) /*!< Enable CONFIG Update Function */
#define FMC_DISABLE_CFG_UPDATE() (FMC->ISPCON &= ~FMC_ISPCON_CFGUEN_Msk) /*!< Disable CONFIG Update Function */
#define FMC_ENABLE_AP_UPDATE() (FMC->ISPCON |= FMC_ISPCON_APUEN_Msk) /*!< Enable APROM Update Function */
#define FMC_DISABLE_AP_UPDATE() (FMC->ISPCON &= ~FMC_ISPCON_APUEN_Msk) /*!< Disable APROM Update Function */
#define FMC_GET_FAIL_FLAG() ((FMC->ISPCON & FMC_ISPCON_ISPFF_Msk) ? 1 : 0) /*!< Get ISP fail flag */
#define FMC_SET_APROM_BOOT() (FMC->ISPCON &= ~FMC_ISPCON_BS_Msk) /*!< Select booting from APROM */
#define FMC_SET_LDROM_BOOT() (FMC->ISPCON |= FMC_ISPCON_BS_Msk) /*!< Select booting from LDROM */
/*---------------------------------------------------------------------------------------------------------*/
/* inline functions */
/*---------------------------------------------------------------------------------------------------------*/
/**
* @brief Program 32-bit data into specified address of flash
*
* @param[in] u32addr Flash address include APROM, LDROM, Data Flash, and CONFIG
* @param[in] u32data 32-bit Data to program
*
* @details To program word data into Flash include APROM, LDROM, Data Flash, and CONFIG.
* The corresponding functions in CONFIG are listed in FMC section of Technical Reference Manual.
*
* @note
* Please make sure that Register Write-Protection Function has been disabled
* before using this function.
*/
static __INLINE void FMC_Write(uint32_t u32addr, uint32_t u32data)
{
FMC->ISPCMD = FMC_ISPCMD_PROGRAM; /* Set ISP Command Code */
FMC->ISPADR = u32addr; /* Set Target ROM Address. The address must be word alignment. */
FMC->ISPDAT = u32data; /* Set Data to Program */
FMC->ISPTRG = 0x1; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG); /* Waiting for ISP Done */
}
/**
* @brief Read 32-bit Data from specified address of flash
*
* @param[in] u32addr Flash address include APROM, LDROM, Data Flash, and CONFIG
*
* @return The data of specified address
*
* @details To read word data from Flash include APROM, LDROM, Data Flash, and CONFIG.
*
* @note
* Please make sure that Register Write-Protection Function has been disabled
* before using this function.
*/
static __INLINE uint32_t FMC_Read(uint32_t u32addr)
{
FMC->ISPCMD = FMC_ISPCMD_READ; /* Set ISP Command Code */
FMC->ISPADR = u32addr; /* Set Target ROM Address. The address must be word alignment. */
FMC->ISPTRG = 0x1; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG); /* Waiting for ISP Done */
return FMC->ISPDAT;
}
/**
* @brief Flash page erase
*
* @param[in] u32addr Flash address including APROM, LDROM, Data Flash, and CONFIG
*
* @details To do flash page erase. The target address could be APROM, LDROM, Data Flash, or CONFIG.
* The page size is 512 bytes.
*
* @retval 0: Success
* @retval -1: Erase failed
*
* @note
* Please make sure that Register Write-Protection Function has been disabled
* before using this function.
*/
static __INLINE int32_t FMC_Erase(uint32_t u32addr)
{
FMC->ISPCMD = FMC_ISPCMD_PAGE_ERASE; /* Set ISP Command Code */
FMC->ISPADR = u32addr; /* Set Target ROM Address. The address must be page alignment. */
FMC->ISPTRG = 0x1; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG); /* Waiting for ISP Done */
/* Check ISPFF flag to know whether erase OK or fail. */
if(FMC->ISPCON & FMC_ISPCON_ISPFF_Msk)
{
FMC->ISPCON = FMC_ISPCON_ISPFF_Msk;
return -1;
}
return 0;
}
/**
* @brief Read Unique ID
*
* @param[in] u8index UID index. 0 = UID[31:0], 1 = UID[63:32], 2 = UID[95:64]
*
* @return The 32-bit unique ID data of specified UID index.
*
* @details To read out 96-bit Unique ID.
*
* @note
* Please make sure that Register Write-Protection Function has been disabled
* before using this function.
*/
static __INLINE uint32_t FMC_ReadUID(uint8_t u8index)
{
FMC->ISPCMD = FMC_ISPCMD_READ_UID; /* Set ISP Command Code */
FMC->ISPADR = (u8index << 2); /* Set UID Address. It must be word alignment. */
FMC->ISPTRG = 0x1; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG); /* Waiting for ISP Done */
return FMC->ISPDAT;
}
/**
* @brief Read company ID
*
* @retval The company ID (32-bit)
*
* @details The company ID of Nuvoton is fixed to be 0xDA
*/
static __INLINE uint32_t FMC_ReadCID(void)
{
FMC->ISPCMD = FMC_ISPCMD_READ_CID; /* Set ISP Command Code */
FMC->ISPADR = 0x0; /* Must keep 0x0 when read CID */
FMC->ISPTRG = FMC_ISPTRG_ISPGO_Msk; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG & FMC_ISPTRG_ISPGO_Msk) ; /* Waiting for ISP Done */
return FMC->ISPDAT;
}
/**
* @brief Read device ID
*
* @retval The device ID (32-bit)
*
*/
static __INLINE uint32_t FMC_ReadDID(void)
{
FMC->ISPCMD = FMC_ISPCMD_READ_DID; /* Set ISP Command Code */
FMC->ISPADR = 0; /* Must keep 0x0 when read DID */
FMC->ISPTRG = FMC_ISPTRG_ISPGO_Msk; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG & FMC_ISPTRG_ISPGO_Msk); /* Waiting for ISP Done */
return FMC->ISPDAT;
}
/**
* @brief Read product ID
*
* @retval The product ID (32-bit)
*
*/
static __INLINE uint32_t FMC_ReadPID(void)
{
FMC->ISPCMD = FMC_ISPCMD_READ_DID; /* Set ISP Command Code */
FMC->ISPADR = 0x04; /* Must keep 0x4 when read PID */
FMC->ISPTRG = FMC_ISPTRG_ISPGO_Msk; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG & FMC_ISPTRG_ISPGO_Msk); /* Waiting for ISP Done */
return FMC->ISPDAT;
}
/**
* @brief To read UCID
*
* @param[in] u32Index Index of the UCID to read. u32Index must be 0, 1, 2, or 3.
*
* @retval The UCID of specified index
*
*/
static __INLINE uint32_t FMC_ReadUCID(uint32_t u32Index)
{
FMC->ISPCMD = FMC_ISPCMD_READ_UID; /* Set ISP Command Code */
FMC->ISPADR = (0x04 * u32Index) + 0x10; /* The UCID is at offset 0x10 with word alignment. */
FMC->ISPTRG = FMC_ISPTRG_ISPGO_Msk; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG & FMC_ISPTRG_ISPGO_Msk); /* Waiting for ISP Done */
return FMC->ISPDAT;
}
/**
* @brief Set vector mapping address
*
* @param[in] u32MapAddr The page address to remap to address 0x0. The address must be page alignment.
*
* @details To set VECMAP to remap specified page address to 0x0.
*
* @note
* VECMAP only valid when new IAP function is enabled. (CBS = 10'b or 00'b)
*
*/
static __INLINE void FMC_SetVectorPageAddr(uint32_t u32PageAddr)
{
FMC->ISPCMD = FMC_ISPCMD_VECMAP; /* Set ISP Command Code */
FMC->ISPADR = u32PageAddr; /* The address of specified page which will be map to address 0x0. It must be page alignment. */
FMC->ISPTRG = 0x1; /* Trigger to start ISP procedure */
__ISB(); /* To make sure ISP/CPU be Synchronized */
while(FMC->ISPTRG); /* Waiting for ISP Done */
}
/**
* @brief Get current vector mapping address.
*
* @return The current vector mapping address.
*
* @details To get VECMAP value which is the page address for remapping to 0x0.
*
* @note
* VECMAP only valid when new IAP function is enabled. (CBS = 10'b or 00'b)
*
*/
static __INLINE uint32_t FMC_GetVECMAP(void)
{
return (FMC->ISPSTA & FMC_ISPSTA_VECMAP_Msk);
}
extern void FMC_Open(void);
extern void FMC_Close(void);
extern void FMC_EnableAPUpdate(void);
extern void FMC_DisableAPUpdate(void);
extern void FMC_EnableConfigUpdate(void);
extern void FMC_DisableConfigUpdate(void);
extern void FMC_EnableLDUpdate(void);
extern void FMC_DisableLDUpdate(void);
extern int32_t FMC_ReadConfig(uint32_t *u32Config, uint32_t u32Count);
extern int32_t FMC_WriteConfig(uint32_t *u32Config, uint32_t u32Count);
extern void FMC_SetBootSource(int32_t i32BootSrc);
extern int32_t FMC_GetBootSource(void);
extern uint32_t FMC_ReadDataFlashBaseAddr(void);
/*@}*/ /* end of group M051_FMC_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group M051_FMC_Driver */
/*@}*/ /* end of group M051_Device_Driver */
#ifdef __cplusplus
}
#endif
#endif