613 lines
30 KiB
C
613 lines
30 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_reg_uart.h
|
|
//! @file
|
|
//!
|
|
//! @brief Register macros for the UART module
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.9 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef AM_REG_UART_H
|
|
#define AM_REG_UART_H
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Instance finder. (2 instance(s) available)
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_REG_UART_NUM_MODULES 2
|
|
#define AM_REG_UARTn(n) \
|
|
(REG_UART_BASEADDR + 0x00001000 * n)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_REG_UART_DR_O 0x00000000
|
|
#define AM_REG_UART_RSR_O 0x00000004
|
|
#define AM_REG_UART_FR_O 0x00000018
|
|
#define AM_REG_UART_ILPR_O 0x00000020
|
|
#define AM_REG_UART_IBRD_O 0x00000024
|
|
#define AM_REG_UART_FBRD_O 0x00000028
|
|
#define AM_REG_UART_LCRH_O 0x0000002C
|
|
#define AM_REG_UART_CR_O 0x00000030
|
|
#define AM_REG_UART_IFLS_O 0x00000034
|
|
#define AM_REG_UART_IER_O 0x00000038
|
|
#define AM_REG_UART_IES_O 0x0000003C
|
|
#define AM_REG_UART_MIS_O 0x00000040
|
|
#define AM_REG_UART_IEC_O 0x00000044
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_DR - UART Data Register
|
|
//
|
|
//*****************************************************************************
|
|
// This is the overrun error indicator.
|
|
#define AM_REG_UART_DR_OEDATA_S 11
|
|
#define AM_REG_UART_DR_OEDATA_M 0x00000800
|
|
#define AM_REG_UART_DR_OEDATA(n) (((uint32_t)(n) << 11) & 0x00000800)
|
|
#define AM_REG_UART_DR_OEDATA_NOERR 0x00000000
|
|
#define AM_REG_UART_DR_OEDATA_ERR 0x00000800
|
|
|
|
// This is the break error indicator.
|
|
#define AM_REG_UART_DR_BEDATA_S 10
|
|
#define AM_REG_UART_DR_BEDATA_M 0x00000400
|
|
#define AM_REG_UART_DR_BEDATA(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
#define AM_REG_UART_DR_BEDATA_NOERR 0x00000000
|
|
#define AM_REG_UART_DR_BEDATA_ERR 0x00000400
|
|
|
|
// This is the parity error indicator.
|
|
#define AM_REG_UART_DR_PEDATA_S 9
|
|
#define AM_REG_UART_DR_PEDATA_M 0x00000200
|
|
#define AM_REG_UART_DR_PEDATA(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
#define AM_REG_UART_DR_PEDATA_NOERR 0x00000000
|
|
#define AM_REG_UART_DR_PEDATA_ERR 0x00000200
|
|
|
|
// This is the framing error indicator.
|
|
#define AM_REG_UART_DR_FEDATA_S 8
|
|
#define AM_REG_UART_DR_FEDATA_M 0x00000100
|
|
#define AM_REG_UART_DR_FEDATA(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
#define AM_REG_UART_DR_FEDATA_NOERR 0x00000000
|
|
#define AM_REG_UART_DR_FEDATA_ERR 0x00000100
|
|
|
|
// This is the UART data port.
|
|
#define AM_REG_UART_DR_DATA_S 0
|
|
#define AM_REG_UART_DR_DATA_M 0x000000FF
|
|
#define AM_REG_UART_DR_DATA(n) (((uint32_t)(n) << 0) & 0x000000FF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_RSR - UART Status Register
|
|
//
|
|
//*****************************************************************************
|
|
// This is the overrun error indicator.
|
|
#define AM_REG_UART_RSR_OESTAT_S 3
|
|
#define AM_REG_UART_RSR_OESTAT_M 0x00000008
|
|
#define AM_REG_UART_RSR_OESTAT(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
#define AM_REG_UART_RSR_OESTAT_NOERR 0x00000000
|
|
#define AM_REG_UART_RSR_OESTAT_ERR 0x00000008
|
|
|
|
// This is the break error indicator.
|
|
#define AM_REG_UART_RSR_BESTAT_S 2
|
|
#define AM_REG_UART_RSR_BESTAT_M 0x00000004
|
|
#define AM_REG_UART_RSR_BESTAT(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
#define AM_REG_UART_RSR_BESTAT_NOERR 0x00000000
|
|
#define AM_REG_UART_RSR_BESTAT_ERR 0x00000004
|
|
|
|
// This is the parity error indicator.
|
|
#define AM_REG_UART_RSR_PESTAT_S 1
|
|
#define AM_REG_UART_RSR_PESTAT_M 0x00000002
|
|
#define AM_REG_UART_RSR_PESTAT(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
#define AM_REG_UART_RSR_PESTAT_NOERR 0x00000000
|
|
#define AM_REG_UART_RSR_PESTAT_ERR 0x00000002
|
|
|
|
// This is the framing error indicator.
|
|
#define AM_REG_UART_RSR_FESTAT_S 0
|
|
#define AM_REG_UART_RSR_FESTAT_M 0x00000001
|
|
#define AM_REG_UART_RSR_FESTAT(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
#define AM_REG_UART_RSR_FESTAT_NOERR 0x00000000
|
|
#define AM_REG_UART_RSR_FESTAT_ERR 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_FR - Flag Register
|
|
//
|
|
//*****************************************************************************
|
|
// This bit holds the transmit BUSY indicator.
|
|
#define AM_REG_UART_FR_TXBUSY_S 8
|
|
#define AM_REG_UART_FR_TXBUSY_M 0x00000100
|
|
#define AM_REG_UART_FR_TXBUSY(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This bit holds the transmit FIFO empty indicator.
|
|
#define AM_REG_UART_FR_TXFE_S 7
|
|
#define AM_REG_UART_FR_TXFE_M 0x00000080
|
|
#define AM_REG_UART_FR_TXFE(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
#define AM_REG_UART_FR_TXFE_XMTFIFO_EMPTY 0x00000080
|
|
|
|
// This bit holds the receive FIFO full indicator.
|
|
#define AM_REG_UART_FR_RXFF_S 6
|
|
#define AM_REG_UART_FR_RXFF_M 0x00000040
|
|
#define AM_REG_UART_FR_RXFF(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
#define AM_REG_UART_FR_RXFF_RCVFIFO_FULL 0x00000040
|
|
|
|
// This bit holds the transmit FIFO full indicator.
|
|
#define AM_REG_UART_FR_TXFF_S 5
|
|
#define AM_REG_UART_FR_TXFF_M 0x00000020
|
|
#define AM_REG_UART_FR_TXFF(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
#define AM_REG_UART_FR_TXFF_XMTFIFO_FULL 0x00000020
|
|
|
|
// This bit holds the receive FIFO empty indicator.
|
|
#define AM_REG_UART_FR_RXFE_S 4
|
|
#define AM_REG_UART_FR_RXFE_M 0x00000010
|
|
#define AM_REG_UART_FR_RXFE(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
#define AM_REG_UART_FR_RXFE_RCVFIFO_EMPTY 0x00000010
|
|
|
|
// This bit holds the busy indicator.
|
|
#define AM_REG_UART_FR_BUSY_S 3
|
|
#define AM_REG_UART_FR_BUSY_M 0x00000008
|
|
#define AM_REG_UART_FR_BUSY(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
#define AM_REG_UART_FR_BUSY_BUSY 0x00000008
|
|
|
|
// This bit holds the data carrier detect indicator.
|
|
#define AM_REG_UART_FR_DCD_S 2
|
|
#define AM_REG_UART_FR_DCD_M 0x00000004
|
|
#define AM_REG_UART_FR_DCD(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
#define AM_REG_UART_FR_DCD_DETECTED 0x00000004
|
|
|
|
// This bit holds the data set ready indicator.
|
|
#define AM_REG_UART_FR_DSR_S 1
|
|
#define AM_REG_UART_FR_DSR_M 0x00000002
|
|
#define AM_REG_UART_FR_DSR(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
#define AM_REG_UART_FR_DSR_READY 0x00000002
|
|
|
|
// This bit holds the clear to send indicator.
|
|
#define AM_REG_UART_FR_CTS_S 0
|
|
#define AM_REG_UART_FR_CTS_M 0x00000001
|
|
#define AM_REG_UART_FR_CTS(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
#define AM_REG_UART_FR_CTS_CLEARTOSEND 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_ILPR - IrDA Counter
|
|
//
|
|
//*****************************************************************************
|
|
// These bits hold the IrDA counter divisor.
|
|
#define AM_REG_UART_ILPR_ILPDVSR_S 0
|
|
#define AM_REG_UART_ILPR_ILPDVSR_M 0x000000FF
|
|
#define AM_REG_UART_ILPR_ILPDVSR(n) (((uint32_t)(n) << 0) & 0x000000FF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_IBRD - Integer Baud Rate Divisor
|
|
//
|
|
//*****************************************************************************
|
|
// These bits hold the baud integer divisor.
|
|
#define AM_REG_UART_IBRD_DIVINT_S 0
|
|
#define AM_REG_UART_IBRD_DIVINT_M 0x0000FFFF
|
|
#define AM_REG_UART_IBRD_DIVINT(n) (((uint32_t)(n) << 0) & 0x0000FFFF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_FBRD - Fractional Baud Rate Divisor
|
|
//
|
|
//*****************************************************************************
|
|
// These bits hold the baud fractional divisor.
|
|
#define AM_REG_UART_FBRD_DIVFRAC_S 0
|
|
#define AM_REG_UART_FBRD_DIVFRAC_M 0x0000003F
|
|
#define AM_REG_UART_FBRD_DIVFRAC(n) (((uint32_t)(n) << 0) & 0x0000003F)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_LCRH - Line Control High
|
|
//
|
|
//*****************************************************************************
|
|
// This bit holds the stick parity select.
|
|
#define AM_REG_UART_LCRH_SPS_S 7
|
|
#define AM_REG_UART_LCRH_SPS_M 0x00000080
|
|
#define AM_REG_UART_LCRH_SPS(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// These bits hold the write length.
|
|
#define AM_REG_UART_LCRH_WLEN_S 5
|
|
#define AM_REG_UART_LCRH_WLEN_M 0x00000060
|
|
#define AM_REG_UART_LCRH_WLEN(n) (((uint32_t)(n) << 5) & 0x00000060)
|
|
|
|
// This bit holds the FIFO enable.
|
|
#define AM_REG_UART_LCRH_FEN_S 4
|
|
#define AM_REG_UART_LCRH_FEN_M 0x00000010
|
|
#define AM_REG_UART_LCRH_FEN(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This bit holds the two stop bits select.
|
|
#define AM_REG_UART_LCRH_STP2_S 3
|
|
#define AM_REG_UART_LCRH_STP2_M 0x00000008
|
|
#define AM_REG_UART_LCRH_STP2(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This bit holds the even parity select.
|
|
#define AM_REG_UART_LCRH_EPS_S 2
|
|
#define AM_REG_UART_LCRH_EPS_M 0x00000004
|
|
#define AM_REG_UART_LCRH_EPS(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This bit holds the parity enable.
|
|
#define AM_REG_UART_LCRH_PEN_S 1
|
|
#define AM_REG_UART_LCRH_PEN_M 0x00000002
|
|
#define AM_REG_UART_LCRH_PEN(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This bit holds the break set.
|
|
#define AM_REG_UART_LCRH_BRK_S 0
|
|
#define AM_REG_UART_LCRH_BRK_M 0x00000001
|
|
#define AM_REG_UART_LCRH_BRK(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_CR - Control Register
|
|
//
|
|
//*****************************************************************************
|
|
// This bit enables CTS hardware flow control.
|
|
#define AM_REG_UART_CR_CTSEN_S 15
|
|
#define AM_REG_UART_CR_CTSEN_M 0x00008000
|
|
#define AM_REG_UART_CR_CTSEN(n) (((uint32_t)(n) << 15) & 0x00008000)
|
|
|
|
// This bit enables RTS hardware flow control.
|
|
#define AM_REG_UART_CR_RTSEN_S 14
|
|
#define AM_REG_UART_CR_RTSEN_M 0x00004000
|
|
#define AM_REG_UART_CR_RTSEN(n) (((uint32_t)(n) << 14) & 0x00004000)
|
|
|
|
// This bit holds modem Out2.
|
|
#define AM_REG_UART_CR_OUT2_S 13
|
|
#define AM_REG_UART_CR_OUT2_M 0x00002000
|
|
#define AM_REG_UART_CR_OUT2(n) (((uint32_t)(n) << 13) & 0x00002000)
|
|
|
|
// This bit holds modem Out1.
|
|
#define AM_REG_UART_CR_OUT1_S 12
|
|
#define AM_REG_UART_CR_OUT1_M 0x00001000
|
|
#define AM_REG_UART_CR_OUT1(n) (((uint32_t)(n) << 12) & 0x00001000)
|
|
|
|
// This bit enables request to send.
|
|
#define AM_REG_UART_CR_RTS_S 11
|
|
#define AM_REG_UART_CR_RTS_M 0x00000800
|
|
#define AM_REG_UART_CR_RTS(n) (((uint32_t)(n) << 11) & 0x00000800)
|
|
|
|
// This bit enables data transmit ready.
|
|
#define AM_REG_UART_CR_DTR_S 10
|
|
#define AM_REG_UART_CR_DTR_M 0x00000400
|
|
#define AM_REG_UART_CR_DTR(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This bit is the receive enable.
|
|
#define AM_REG_UART_CR_RXE_S 9
|
|
#define AM_REG_UART_CR_RXE_M 0x00000200
|
|
#define AM_REG_UART_CR_RXE(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This bit is the transmit enable.
|
|
#define AM_REG_UART_CR_TXE_S 8
|
|
#define AM_REG_UART_CR_TXE_M 0x00000100
|
|
#define AM_REG_UART_CR_TXE(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This bit is the loopback enable.
|
|
#define AM_REG_UART_CR_LBE_S 7
|
|
#define AM_REG_UART_CR_LBE_M 0x00000080
|
|
#define AM_REG_UART_CR_LBE(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This bitfield is the UART clock select.
|
|
#define AM_REG_UART_CR_CLKSEL_S 4
|
|
#define AM_REG_UART_CR_CLKSEL_M 0x00000070
|
|
#define AM_REG_UART_CR_CLKSEL(n) (((uint32_t)(n) << 4) & 0x00000070)
|
|
#define AM_REG_UART_CR_CLKSEL_NOCLK 0x00000000
|
|
#define AM_REG_UART_CR_CLKSEL_24MHZ 0x00000010
|
|
#define AM_REG_UART_CR_CLKSEL_12MHZ 0x00000020
|
|
#define AM_REG_UART_CR_CLKSEL_6MHZ 0x00000030
|
|
#define AM_REG_UART_CR_CLKSEL_3MHZ 0x00000040
|
|
#define AM_REG_UART_CR_CLKSEL_RSVD5 0x00000050
|
|
#define AM_REG_UART_CR_CLKSEL_RSVD6 0x00000060
|
|
#define AM_REG_UART_CR_CLKSEL_RSVD7 0x00000070
|
|
|
|
// This bit is the UART clock enable.
|
|
#define AM_REG_UART_CR_CLKEN_S 3
|
|
#define AM_REG_UART_CR_CLKEN_M 0x00000008
|
|
#define AM_REG_UART_CR_CLKEN(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This bit is the SIR low power select.
|
|
#define AM_REG_UART_CR_SIRLP_S 2
|
|
#define AM_REG_UART_CR_SIRLP_M 0x00000004
|
|
#define AM_REG_UART_CR_SIRLP(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This bit is the SIR ENDEC enable.
|
|
#define AM_REG_UART_CR_SIREN_S 1
|
|
#define AM_REG_UART_CR_SIREN_M 0x00000002
|
|
#define AM_REG_UART_CR_SIREN(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This bit is the UART enable.
|
|
#define AM_REG_UART_CR_UARTEN_S 0
|
|
#define AM_REG_UART_CR_UARTEN_M 0x00000001
|
|
#define AM_REG_UART_CR_UARTEN(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_IFLS - FIFO Interrupt Level Select
|
|
//
|
|
//*****************************************************************************
|
|
// These bits hold the receive FIFO interrupt level.
|
|
#define AM_REG_UART_IFLS_RXIFLSEL_S 3
|
|
#define AM_REG_UART_IFLS_RXIFLSEL_M 0x00000038
|
|
#define AM_REG_UART_IFLS_RXIFLSEL(n) (((uint32_t)(n) << 3) & 0x00000038)
|
|
|
|
// These bits hold the transmit FIFO interrupt level.
|
|
#define AM_REG_UART_IFLS_TXIFLSEL_S 0
|
|
#define AM_REG_UART_IFLS_TXIFLSEL_M 0x00000007
|
|
#define AM_REG_UART_IFLS_TXIFLSEL(n) (((uint32_t)(n) << 0) & 0x00000007)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_IER - Interrupt Enable
|
|
//
|
|
//*****************************************************************************
|
|
// This bit holds the overflow interrupt enable.
|
|
#define AM_REG_UART_IER_OEIM_S 10
|
|
#define AM_REG_UART_IER_OEIM_M 0x00000400
|
|
#define AM_REG_UART_IER_OEIM(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This bit holds the break error interrupt enable.
|
|
#define AM_REG_UART_IER_BEIM_S 9
|
|
#define AM_REG_UART_IER_BEIM_M 0x00000200
|
|
#define AM_REG_UART_IER_BEIM(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This bit holds the parity error interrupt enable.
|
|
#define AM_REG_UART_IER_PEIM_S 8
|
|
#define AM_REG_UART_IER_PEIM_M 0x00000100
|
|
#define AM_REG_UART_IER_PEIM(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This bit holds the framing error interrupt enable.
|
|
#define AM_REG_UART_IER_FEIM_S 7
|
|
#define AM_REG_UART_IER_FEIM_M 0x00000080
|
|
#define AM_REG_UART_IER_FEIM(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This bit holds the receive timeout interrupt enable.
|
|
#define AM_REG_UART_IER_RTIM_S 6
|
|
#define AM_REG_UART_IER_RTIM_M 0x00000040
|
|
#define AM_REG_UART_IER_RTIM(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This bit holds the transmit interrupt enable.
|
|
#define AM_REG_UART_IER_TXIM_S 5
|
|
#define AM_REG_UART_IER_TXIM_M 0x00000020
|
|
#define AM_REG_UART_IER_TXIM(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This bit holds the receive interrupt enable.
|
|
#define AM_REG_UART_IER_RXIM_S 4
|
|
#define AM_REG_UART_IER_RXIM_M 0x00000010
|
|
#define AM_REG_UART_IER_RXIM(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This bit holds the modem DSR interrupt enable.
|
|
#define AM_REG_UART_IER_DSRMIM_S 3
|
|
#define AM_REG_UART_IER_DSRMIM_M 0x00000008
|
|
#define AM_REG_UART_IER_DSRMIM(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This bit holds the modem DCD interrupt enable.
|
|
#define AM_REG_UART_IER_DCDMIM_S 2
|
|
#define AM_REG_UART_IER_DCDMIM_M 0x00000004
|
|
#define AM_REG_UART_IER_DCDMIM(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This bit holds the modem CTS interrupt enable.
|
|
#define AM_REG_UART_IER_CTSMIM_S 1
|
|
#define AM_REG_UART_IER_CTSMIM_M 0x00000002
|
|
#define AM_REG_UART_IER_CTSMIM(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This bit holds the modem TXCMP interrupt enable.
|
|
#define AM_REG_UART_IER_TXCMPMIM_S 0
|
|
#define AM_REG_UART_IER_TXCMPMIM_M 0x00000001
|
|
#define AM_REG_UART_IER_TXCMPMIM(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_IES - Interrupt Status
|
|
//
|
|
//*****************************************************************************
|
|
// This bit holds the overflow interrupt status.
|
|
#define AM_REG_UART_IES_OERIS_S 10
|
|
#define AM_REG_UART_IES_OERIS_M 0x00000400
|
|
#define AM_REG_UART_IES_OERIS(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This bit holds the break error interrupt status.
|
|
#define AM_REG_UART_IES_BERIS_S 9
|
|
#define AM_REG_UART_IES_BERIS_M 0x00000200
|
|
#define AM_REG_UART_IES_BERIS(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This bit holds the parity error interrupt status.
|
|
#define AM_REG_UART_IES_PERIS_S 8
|
|
#define AM_REG_UART_IES_PERIS_M 0x00000100
|
|
#define AM_REG_UART_IES_PERIS(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This bit holds the framing error interrupt status.
|
|
#define AM_REG_UART_IES_FERIS_S 7
|
|
#define AM_REG_UART_IES_FERIS_M 0x00000080
|
|
#define AM_REG_UART_IES_FERIS(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This bit holds the receive timeout interrupt status.
|
|
#define AM_REG_UART_IES_RTRIS_S 6
|
|
#define AM_REG_UART_IES_RTRIS_M 0x00000040
|
|
#define AM_REG_UART_IES_RTRIS(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This bit holds the transmit interrupt status.
|
|
#define AM_REG_UART_IES_TXRIS_S 5
|
|
#define AM_REG_UART_IES_TXRIS_M 0x00000020
|
|
#define AM_REG_UART_IES_TXRIS(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This bit holds the receive interrupt status.
|
|
#define AM_REG_UART_IES_RXRIS_S 4
|
|
#define AM_REG_UART_IES_RXRIS_M 0x00000010
|
|
#define AM_REG_UART_IES_RXRIS(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This bit holds the modem DSR interrupt status.
|
|
#define AM_REG_UART_IES_DSRMRIS_S 3
|
|
#define AM_REG_UART_IES_DSRMRIS_M 0x00000008
|
|
#define AM_REG_UART_IES_DSRMRIS(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This bit holds the modem DCD interrupt status.
|
|
#define AM_REG_UART_IES_DCDMRIS_S 2
|
|
#define AM_REG_UART_IES_DCDMRIS_M 0x00000004
|
|
#define AM_REG_UART_IES_DCDMRIS(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This bit holds the modem CTS interrupt status.
|
|
#define AM_REG_UART_IES_CTSMRIS_S 1
|
|
#define AM_REG_UART_IES_CTSMRIS_M 0x00000002
|
|
#define AM_REG_UART_IES_CTSMRIS(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This bit holds the modem TXCMP interrupt status.
|
|
#define AM_REG_UART_IES_TXCMPMRIS_S 0
|
|
#define AM_REG_UART_IES_TXCMPMRIS_M 0x00000001
|
|
#define AM_REG_UART_IES_TXCMPMRIS(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_MIS - Masked Interrupt Status
|
|
//
|
|
//*****************************************************************************
|
|
// This bit holds the overflow interrupt status masked.
|
|
#define AM_REG_UART_MIS_OEMIS_S 10
|
|
#define AM_REG_UART_MIS_OEMIS_M 0x00000400
|
|
#define AM_REG_UART_MIS_OEMIS(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This bit holds the break error interrupt status masked.
|
|
#define AM_REG_UART_MIS_BEMIS_S 9
|
|
#define AM_REG_UART_MIS_BEMIS_M 0x00000200
|
|
#define AM_REG_UART_MIS_BEMIS(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This bit holds the parity error interrupt status masked.
|
|
#define AM_REG_UART_MIS_PEMIS_S 8
|
|
#define AM_REG_UART_MIS_PEMIS_M 0x00000100
|
|
#define AM_REG_UART_MIS_PEMIS(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This bit holds the framing error interrupt status masked.
|
|
#define AM_REG_UART_MIS_FEMIS_S 7
|
|
#define AM_REG_UART_MIS_FEMIS_M 0x00000080
|
|
#define AM_REG_UART_MIS_FEMIS(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This bit holds the receive timeout interrupt status masked.
|
|
#define AM_REG_UART_MIS_RTMIS_S 6
|
|
#define AM_REG_UART_MIS_RTMIS_M 0x00000040
|
|
#define AM_REG_UART_MIS_RTMIS(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This bit holds the transmit interrupt status masked.
|
|
#define AM_REG_UART_MIS_TXMIS_S 5
|
|
#define AM_REG_UART_MIS_TXMIS_M 0x00000020
|
|
#define AM_REG_UART_MIS_TXMIS(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This bit holds the receive interrupt status masked.
|
|
#define AM_REG_UART_MIS_RXMIS_S 4
|
|
#define AM_REG_UART_MIS_RXMIS_M 0x00000010
|
|
#define AM_REG_UART_MIS_RXMIS(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This bit holds the modem DSR interrupt status masked.
|
|
#define AM_REG_UART_MIS_DSRMMIS_S 3
|
|
#define AM_REG_UART_MIS_DSRMMIS_M 0x00000008
|
|
#define AM_REG_UART_MIS_DSRMMIS(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This bit holds the modem DCD interrupt status masked.
|
|
#define AM_REG_UART_MIS_DCDMMIS_S 2
|
|
#define AM_REG_UART_MIS_DCDMMIS_M 0x00000004
|
|
#define AM_REG_UART_MIS_DCDMMIS(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This bit holds the modem CTS interrupt status masked.
|
|
#define AM_REG_UART_MIS_CTSMMIS_S 1
|
|
#define AM_REG_UART_MIS_CTSMMIS_M 0x00000002
|
|
#define AM_REG_UART_MIS_CTSMMIS(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This bit holds the modem TXCMP interrupt status masked.
|
|
#define AM_REG_UART_MIS_TXCMPMMIS_S 0
|
|
#define AM_REG_UART_MIS_TXCMPMMIS_M 0x00000001
|
|
#define AM_REG_UART_MIS_TXCMPMMIS(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// UART_IEC - Interrupt Clear
|
|
//
|
|
//*****************************************************************************
|
|
// This bit holds the overflow interrupt clear.
|
|
#define AM_REG_UART_IEC_OEIC_S 10
|
|
#define AM_REG_UART_IEC_OEIC_M 0x00000400
|
|
#define AM_REG_UART_IEC_OEIC(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This bit holds the break error interrupt clear.
|
|
#define AM_REG_UART_IEC_BEIC_S 9
|
|
#define AM_REG_UART_IEC_BEIC_M 0x00000200
|
|
#define AM_REG_UART_IEC_BEIC(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This bit holds the parity error interrupt clear.
|
|
#define AM_REG_UART_IEC_PEIC_S 8
|
|
#define AM_REG_UART_IEC_PEIC_M 0x00000100
|
|
#define AM_REG_UART_IEC_PEIC(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This bit holds the framing error interrupt clear.
|
|
#define AM_REG_UART_IEC_FEIC_S 7
|
|
#define AM_REG_UART_IEC_FEIC_M 0x00000080
|
|
#define AM_REG_UART_IEC_FEIC(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This bit holds the receive timeout interrupt clear.
|
|
#define AM_REG_UART_IEC_RTIC_S 6
|
|
#define AM_REG_UART_IEC_RTIC_M 0x00000040
|
|
#define AM_REG_UART_IEC_RTIC(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This bit holds the transmit interrupt clear.
|
|
#define AM_REG_UART_IEC_TXIC_S 5
|
|
#define AM_REG_UART_IEC_TXIC_M 0x00000020
|
|
#define AM_REG_UART_IEC_TXIC(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This bit holds the receive interrupt clear.
|
|
#define AM_REG_UART_IEC_RXIC_S 4
|
|
#define AM_REG_UART_IEC_RXIC_M 0x00000010
|
|
#define AM_REG_UART_IEC_RXIC(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This bit holds the modem DSR interrupt clear.
|
|
#define AM_REG_UART_IEC_DSRMIC_S 3
|
|
#define AM_REG_UART_IEC_DSRMIC_M 0x00000008
|
|
#define AM_REG_UART_IEC_DSRMIC(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This bit holds the modem DCD interrupt clear.
|
|
#define AM_REG_UART_IEC_DCDMIC_S 2
|
|
#define AM_REG_UART_IEC_DCDMIC_M 0x00000004
|
|
#define AM_REG_UART_IEC_DCDMIC(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This bit holds the modem CTS interrupt clear.
|
|
#define AM_REG_UART_IEC_CTSMIC_S 1
|
|
#define AM_REG_UART_IEC_CTSMIC_M 0x00000002
|
|
#define AM_REG_UART_IEC_CTSMIC(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This bit holds the modem TXCMP interrupt clear.
|
|
#define AM_REG_UART_IEC_TXCMPMIC_S 0
|
|
#define AM_REG_UART_IEC_TXCMPMIC_M 0x00000001
|
|
#define AM_REG_UART_IEC_TXCMPMIC(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
#endif // AM_REG_UART_H
|