rtt-f030/bsp/xplorer4330/libraries/lpc_ip/gpiogrpint_001.h

121 lines
4.1 KiB
C

/*
* @brief GPIO Group Interrupt Registers and control functions
*
* @note
* Copyright(C) NXP Semiconductors, 2012
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __GPIOGRPINT_001_H_
#define __GPIOGRPINT_001_H_
#include "sys_config.h"
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup IP_GPIOGRPINT_001 IP: GPIO Grouped Interrupts register block and driver
* @ingroup IP_Drivers
* @{
*/
/**
* @brief GPIO grouped interrupt register block structure
*/
typedef struct { /*!< GPIO_GROUP_INTn Structure */
__IO uint32_t CTRL; /*!< GPIO grouped interrupt control register */
__I uint32_t RESERVED0[7];
__IO uint32_t PORT_POL[8]; /*!< GPIO grouped interrupt port polarity register */
__IO uint32_t PORT_ENA[8]; /*!< GPIO grouped interrupt port m enable register */
} IP_GPIOGROUPINT_001_Type;
/**
* @brief GPIO Group Interrupt Pin Initialization
* @param pGPIOGPINT : Pointer to GPIOIR register block
* @param PortComb : GPIO group combined enable, should be: 0 (OR functionality) and 1 (AND functionality)
* @param PortTrigger : GPIO group interrupt trigger, should be: 0 (Edge-triggered) 1 (Level triggered)
* @return None
*/
STATIC INLINE void IP_GPIOGP_IntInit(IP_GPIOGROUPINT_001_Type *pGPIOGPINT, uint8_t PortComb, uint8_t PortTrigger)
{
pGPIOGPINT->CTRL = ((PortTrigger & 0x1) << 2) | ((PortComb & 0x1) << 1);
}
/**
* @brief GPIO Group Interrupt Pin Add to Group
* @param pGPIOGPINT : Pointer to GPIOIR register block
* @param PortNum : GPIO port number, should be 0 to 7
* @param PinNum : GPIO pin number, should be 0 to 31
* @param ActiveMode : GPIO active mode, should be 0 (active LOW) and 1 (active HIGH)
* @return None
*/
void IP_GPIOGP_IntPinAdd(IP_GPIOGROUPINT_001_Type *pGPIOGPINT, uint8_t PortNum, uint8_t PinNum, bool ActiveMode);
/**
* @brief GPIO Group Interrupt Pin Remove from Group
* @param pGPIOGPINT : Pointer to GPIOIR register block
* @param PortNum : GPIO port number, should be 0 to 7
* @param PinNum : GPIO pin number, should be 0 to 31
* @return None
*/
STATIC INLINE void IP_GPIOGP_IntPinRemove(IP_GPIOGROUPINT_001_Type *pGPIOGPINT, uint8_t PortNum, uint8_t PinNum)
{
/* configure to PORT_ENA register */
pGPIOGPINT->PORT_ENA[PortNum] &= ~(1 << PinNum);
}
/**
* @brief Get GPIO Group Interrupt Get Status
* @param pGPIOGPINT : Pointer to GPIOIR register block
* @return true if interrupt is pending, otherwise false
*/
STATIC INLINE bool IP_GPIOGP_IntGetStatus(IP_GPIOGROUPINT_001_Type *pGPIOGPINT)
{
return (bool) (pGPIOGPINT->CTRL & 0x01);
}
/**
* @brief Clear GPIO Group Interrupt
* @param pGPIOGPINT : Pointer to GPIOIR register block
* @return None
*/
STATIC INLINE void IP_GPIOGP_IntClear(IP_GPIOGROUPINT_001_Type *pGPIOGPINT)
{
pGPIOGPINT->CTRL |= 0x01;
}
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __GPIOGRPINT_001_H_ */