rtt-f030/bsp/stm32f20x/Drivers/i2c.h

147 lines
4.3 KiB
C

#ifndef I2C_H
#define I2C_H
#include "stm32f2xx.h"
/* Exported constants --------------------------------------------------------*/
#define SR1_AF_Set ((uint16_t)0x0400)
#define SR1_ARLO_Set ((uint16_t)0x0200)
#define SR1_BERR_Set ((uint16_t)0x0100)
#define SR1_ADDR_Set ((uint16_t)0x0002)
#define SR1_SB_Set ((uint16_t)0x0001)
#define SR2_BUSY ((uint16_t)0x0002)
#define SR2_MSL ((uint16_t)0x0001)
#define CR1_SWRST_Set ((uint16_t)0x8000)
/* I2C SPE mask */
#define CR1_PE_Set ((uint16_t)0x0001)
#define CR1_PE_Reset ((uint16_t)0xFFFE)
/* I2C START mask */
#define CR1_START_Set ((uint16_t)0x0100)
#define CR1_START_Reset ((uint16_t)0xFEFF)
#define CR1_POS_Set ((uint16_t)0x0800)
#define CR1_POS_Reset ((uint16_t)0xF7FF)
/* I2C STOP mask */
#define CR1_STOP_Set ((uint16_t)0x0200)
#define CR1_STOP_Reset ((uint16_t)0xFDFF)
/* I2C ACK mask */
#define CR1_ACK_Set ((uint16_t)0x0400)
#define CR1_ACK_Reset ((uint16_t)0xFBFF)
/* I2C ENARP mask */
#define CR1_ENARP_Set ((uint16_t)0x0010)
#define CR1_ENARP_Reset ((uint16_t)0xFFEF)
/* I2C NOSTRETCH mask */
#define CR1_NOSTRETCH_Set ((uint16_t)0x0080)
#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F)
/* I2C registers Masks */
#define CR1_CLEAR_Mask ((uint16_t)0xFBF5)
/* I2C DMAEN mask */
#define CR2_DMAEN_Set ((uint16_t)0x0800)
#define CR2_DMAEN_Reset ((uint16_t)0xF7FF)
/* I2C LAST mask */
#define CR2_LAST_Set ((uint16_t)0x1000)
#define CR2_LAST_Reset ((uint16_t)0xEFFF)
/* I2C FREQ mask */
#define CR2_FREQ_Reset ((uint16_t)0xFFC0)
/* I2C ADD0 mask */
#define OAR1_ADD0_Set ((uint16_t)0x0001)
#define OAR1_ADD0_Reset ((uint16_t)0xFFFE)
/* I2C ENDUAL mask */
#define OAR2_ENDUAL_Set ((uint16_t)0x0001)
#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE)
/* I2C ADD2 mask */
#define OAR2_ADD2_Reset ((uint16_t)0xFF01)
/* I2C F/S mask */
#define CCR_FS_Set ((uint16_t)0x8000)
/* I2C CCR mask */
#define CCR_CCR_Set ((uint16_t)0x0FFF)
/* I2C FLAG mask */
#define FLAG_Mask ((uint32_t)0x00FFFFFF)
/* I2C Interrupt Enable mask */
#define ITEN_Mask ((uint32_t)0x07000000)
#define I2C_IT_BUF ((uint16_t)0x0400)
#define I2C_IT_EVT ((uint16_t)0x0200)
#define I2C_IT_ERR ((uint16_t)0x0100)
#define ClockSpeed 400000
#define I2C_DIRECTION_TX 0
#define I2C_DIRECTION_RX 1
#define OwnAddress1 0x28
#define OwnAddress2 0x30
#define I2C1_DMA_CHANNEL_TX DMA1_Stream6
#define I2C1_DMA_CHANNEL_RX DMA1_Stream0
#define I2C1_DMA_TX_IRQn DMA1_Stream6_IRQn
#define I2C1_DMA_RX_IRQn DMA1_Stream0_IRQn
#define I2C2_DMA_CHANNEL_TX DMA1_Stream2
#define I2C2_DMA_CHANNEL_RX DMA1_Stream7
#define I2C2_DMA_TX_IRQn DMA1_Stream2_IRQn
#define I2C2_DMA_RX_IRQn DMA1_Stream7_IRQn
#define I2C1_DR_Address 0x40005410
#define I2C2_DR_Address 0x40005810
#define I2C1_SDA_PIN GPIO_Pin_7
#define I2C1_SCL_PIN GPIO_Pin_6
#define I2C1_SDA_SOURCE GPIO_PinSource7
#define I2C1_SCL_SOURCE GPIO_PinSource6
#define I2C1_GPIO_PORT GPIOB
#define I2C1_GPIO_CLK RCC_AHB1Periph_GPIOB
#define I2C1_CLK RCC_APB1Periph_I2C1
#define I2C2_SDA_PIN GPIO_Pin_11
#define I2C2_SCL_PIN GPIO_Pin_10
#define I2C2_SDA_SOURCE GPIO_PinSource11
#define I2C2_SCL_SOURCE GPIO_PinSource10
#define I2C2_GPIO_PORT GPIOB
#define I2C2_GPIO_CLK RCC_AHB1Periph_GPIOB
#define I2C2_CLK RCC_APB1Periph_I2C1
#define I2C_MEM_1Byte 1
#define I2C_MEM_2Bytes 2
typedef enum
{
Error = 0,
Success = !Error
}Status;
typedef enum
{
Polling = 0x00,
Interrupt = 0x01,
DMA = 0x02
} I2C_ProgrammingModel;
void I2C1_INIT();
Status I2C_AcknowledgePolling(I2C_TypeDef* I2Cx ,uint8_t Addr);
Status I2C_IORW(I2C_TypeDef* I2Cx, uint8_t* pBuffer, uint32_t NumByteToRead, uint16_t memAddr, uint8_t SlaveAddress , uint8_t MemType );
#endif