280 lines
11 KiB
C
280 lines
11 KiB
C
/**************************************************************************//**
|
|
* @file sc.h
|
|
* @version V3.00
|
|
* $Revision: 7 $
|
|
* $Date: 15/08/11 10:26a $
|
|
* @brief M451 series Smartcard UART mode (SCUART) driver header file
|
|
*
|
|
* @note
|
|
* Copyright (C) 2013~2015 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#ifndef __SCUART_H__
|
|
#define __SCUART_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup SCUART_Driver SCUART Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup SCUART_EXPORTED_CONSTANTS SCUART Exported Constants
|
|
@{
|
|
*/
|
|
#define SCUART_CHAR_LEN_5 (0x3ul << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 5 bits */
|
|
#define SCUART_CHAR_LEN_6 (0x2ul << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 6 bits */
|
|
#define SCUART_CHAR_LEN_7 (0x1ul << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 7 bits */
|
|
#define SCUART_CHAR_LEN_8 (0) /*!< Set SCUART word length to 8 bits */
|
|
|
|
#define SCUART_PARITY_NONE (SC_UARTCTL_PBOFF_Msk) /*!< Set SCUART transfer with no parity */
|
|
#define SCUART_PARITY_ODD (SC_UARTCTL_OPE_Msk) /*!< Set SCUART transfer with odd parity */
|
|
#define SCUART_PARITY_EVEN (0) /*!< Set SCUART transfer with even parity */
|
|
|
|
#define SCUART_STOP_BIT_1 (SC_CTL_NSB_Msk) /*!< Set SCUART transfer with one stop bit */
|
|
#define SCUART_STOP_BIT_2 (0) /*!< Set SCUART transfer with two stop bits */
|
|
|
|
|
|
/*@}*/ /* end of group SCUART_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup SCUART_EXPORTED_FUNCTIONS SCUART Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/* TX Macros */
|
|
/**
|
|
* @brief Write Data to Tx data register.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @param[in] u8Data Data byte to transmit.
|
|
* @return None
|
|
* @details By writing data to DAT register, the SC will send out an 8-bit data.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_WRITE(sc, u8Data) ((sc)-> DAT = (u8Data))
|
|
|
|
/**
|
|
* @brief Get TX FIFO empty flag status from register.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @return Transmit FIFO empty status.
|
|
* @retval 0 Transmit FIFO is not empty.
|
|
* @retval SC_STATUS_TXEMPTY_Msk Transmit FIFO is empty.
|
|
* @details When the last byte of TX buffer has been transferred to Transmitter Shift Register, hardware sets TXEMPTY bit (SC_STATUS[9]) high.
|
|
* It will be cleared when writing data into DAT (SC_DAT[7:0]).
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_TX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_TXEMPTY_Msk)
|
|
|
|
/**
|
|
* @brief Get TX FIFO full flag status from register.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 Transmit FIFO is not full.
|
|
* @retval SC_STATUS_TXFULL_Msk Transmit FIFO is full.
|
|
* @details TXFULL(SC_STATUS[10]) is set when TX pointer is equal to 4, otherwise is cleared by hardware.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_TX_FULL(sc) ((sc)->STATUS & SC_STATUS_TXFULL_Msk)
|
|
|
|
/**
|
|
* @brief Wait specified smartcard port transmission complete.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @return None
|
|
* @details TXACT (SC_STATUS[31]) is cleared automatically when TX transfer is finished or the last byte transmission has completed.
|
|
* @note This macro blocks until transmit complete.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_WAIT_TX_EMPTY(sc) while((sc)->STATUS & SC_STATUS_TXACT_Msk)
|
|
|
|
/**
|
|
* @brief Check specified smartcard port transmit FIFO is full or not.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 Transmit FIFO is not full.
|
|
* @retval 1 Transmit FIFO is full.
|
|
* @details TXFULL(SC_STATUS[10]) indicates TX buffer full or not.
|
|
* This is set when TX pointer is equal to 4, otherwise is cleared by hardware.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_TX_FULL(sc) ((sc)->STATUS & SC_STATUS_TXFULL_Msk ? 1 : 0)
|
|
|
|
/**
|
|
* @brief Check specified smartcard port transmission is over.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 Transmit is not complete.
|
|
* @retval 1 Transmit complete.
|
|
* @details TXACT (SC_STATUS[31]) is set by hardware when TX transfer is in active and the STOP bit of the last byte has been transmitted.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_TX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_TXACT_Msk ? 0 : 1)
|
|
|
|
|
|
/* RX Macros */
|
|
|
|
/**
|
|
* @brief Read Rx data register.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @return The oldest data byte in RX FIFO.
|
|
* @details By reading DAT register, the SC will return an 8-bit received data.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_READ(sc) ((sc)->DAT)
|
|
|
|
/**
|
|
* @brief Get RX FIFO empty flag status from register.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 Receive FIFO is not empty.
|
|
* @retval SC_STATUS_RXEMPTY_Msk Receive FIFO is empty.
|
|
* @details When the last byte of Rx buffer has been read by CPU, hardware sets RXEMPTY(SC_STATUS[1]) high.
|
|
* It will be cleared when SC receives any new data.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_RX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_RXEMPTY_Msk)
|
|
|
|
|
|
/**
|
|
* @brief Get RX FIFO full flag status from register.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 Receive FIFO is not full.
|
|
* @retval SC_STATUS_TXFULL_Msk Receive FIFO is full.
|
|
* @details RXFULLF(SC_STATUS[2]) is set when RX pointer is equal to 4, otherwise it is cleared by hardware.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_RX_FULL(sc) ((sc)->STATUS & SC_STATUS_RXFULL_Msk)
|
|
|
|
/**
|
|
* @brief Check if receive data number in FIFO reach FIFO trigger level or not.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 The number of bytes in receive FIFO is less than trigger level.
|
|
* @retval 1 The number of bytes in receive FIFO equals or larger than trigger level.
|
|
* @details RDAIF(SC_INTSTS[0]) is used for received data reaching trigger level RXTRGLV (SC_CTL[7:6]) interrupt status flag.
|
|
* @note If receive trigger level is \b not 1 byte, this macro return 0 does not necessary indicates there is no data in FIFO.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_RX_READY(sc) ((sc)->INTSTS & SC_INTSTS_RDAIF_Msk ? 1 : 0)
|
|
|
|
/**
|
|
* @brief Check specified smartcard port receive FIFO is full or not.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @retval 0 Receive FIFO is not full.
|
|
* @retval 1 Receive FIFO is full.
|
|
* @details RXFULLF(SC_STATUS[2]) is set when RX pointer is equal to 4, otherwise it is cleared by hardware.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_RX_FULL(sc) ((sc)->STATUS & SC_STATUS_RXFULL_Msk ? 1 : 0)
|
|
|
|
/* Interrupt Macros */
|
|
|
|
/**
|
|
* @brief Enable specified interrupts.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @param[in] u32Mask Interrupt masks to enable, a combination of following bits.
|
|
* - \ref SC_INTEN_RXTOIF_Msk
|
|
* - \ref SC_INTEN_TERRIEN_Msk
|
|
* - \ref SC_INTEN_TBEIEN_Msk
|
|
* - \ref SC_INTEN_RDAIEN_Msk
|
|
* @return None
|
|
* @details The macro is used to enable receiver buffer time-out interrupt, transfer error interrupt,
|
|
* transmit buffer empty interrupt or receive data reach trigger level interrupt.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_ENABLE_INT(sc, u32Mask) ((sc)->INTEN |= (u32Mask))
|
|
|
|
/**
|
|
* @brief Disable specified interrupts.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @param[in] u32Mask Interrupt masks to disable, a combination of following bits.
|
|
* - \ref SC_INTEN_RXTOIF_Msk
|
|
* - \ref SC_INTEN_TERRIEN_Msk
|
|
* - \ref SC_INTEN_TBEIEN_Msk
|
|
* - \ref SC_INTEN_RDAIEN_Msk
|
|
* @return None
|
|
* @details The macro is used to disable receiver buffer time-out interrupt, transfer error interrupt,
|
|
* transmit buffer empty interrupt or receive data reach trigger level interrupt.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_DISABLE_INT(sc, u32Mask) ((sc)->INTEN &= ~(u32Mask))
|
|
|
|
/**
|
|
* @brief Get specified interrupt flag/status.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @param[in] u32Type Interrupt flag/status to check, could be one of following value:
|
|
* - \ref SC_INTSTS_RBTOIF_Msk
|
|
* - \ref SC_INTSTS_TERRIF_Msk
|
|
* - \ref SC_INTSTS_TBEIF_Msk
|
|
* - \ref SC_INTSTS_RDAIF_Msk
|
|
* @return The status of specified interrupt.
|
|
* @retval 0 Specified interrupt does not happened.
|
|
* @retval 1 Specified interrupt happened.
|
|
* @details The macro is used to get receiver buffer time-out interrupt status, transfer error interrupt status,
|
|
* transmit buffer empty interrupt status or receive data reach interrupt status.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_INT_FLAG(sc, u32Type) ((sc)->INTSTS & (u32Type) ? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear specified interrupt flag/status.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @param[in] u32Type Interrupt flag/status to clear, could be the combination of following values:
|
|
* - \ref SC_INTSTS_RBTOIF_Msk
|
|
* - \ref SC_INTSTS_TERRIF_Msk
|
|
* - \ref SC_INTSTS_TBEIF_Msk
|
|
* @return None
|
|
* @details The macro is used to clear receiver buffer time-out interrupt flag, transfer error interrupt flag or
|
|
* transmit buffer empty interrupt flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_CLR_INT_FLAG(sc, u32Type) ((sc)->INTSTS = (u32Type))
|
|
|
|
/**
|
|
* @brief Get receive error flag/status.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @return Current receive error status, could one of following errors:
|
|
* @retval SC_STATUS_PEF_Msk Parity error.
|
|
* @retval SC_STATUS_FEF_Msk Frame error.
|
|
* @retval SC_STATUS_BEF_Msk Break error.
|
|
* @details The macro is used to get receiver parity error status, receiver frame error status or
|
|
* receiver break error status.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_ERR_FLAG(sc) ((sc)->STATUS & (SC_STATUS_PEF_Msk | SC_STATUS_FEF_Msk | SC_STATUS_BEF_Msk))
|
|
|
|
/**
|
|
* @brief Clear specified receive error flag/status.
|
|
* @param[in] sc The pointer of smartcard module.
|
|
* @param[in] u32Mask Receive error flag/status to clear, combination following values:
|
|
* - \ref SC_STATUS_PEF_Msk
|
|
* - \ref SC_STATUS_FEF_Msk
|
|
* - \ref SC_STATUS_BEF_Msk
|
|
* @return None
|
|
* @details The macro is used to clear receiver parity error flag, receiver frame error flag or
|
|
* receiver break error flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_CLR_ERR_FLAG(sc, u32Mask) ((sc)->STATUS = (u32Mask))
|
|
|
|
void SCUART_Close(SC_T* sc);
|
|
uint32_t SCUART_Open(SC_T* sc, uint32_t u32baudrate);
|
|
uint32_t SCUART_Read(SC_T* sc, uint8_t *pu8RxBuf, uint32_t u32ReadBytes);
|
|
uint32_t SCUART_SetLineConfig(SC_T* sc, uint32_t u32Baudrate, uint32_t u32DataWidth, uint32_t u32Parity, uint32_t u32StopBits);
|
|
void SCUART_SetTimeoutCnt(SC_T* sc, uint32_t u32TOC);
|
|
void SCUART_Write(SC_T* sc, uint8_t *pu8TxBuf, uint32_t u32WriteBytes);
|
|
|
|
/*@}*/ /* end of group SCUART_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group SCUART_Driver */
|
|
|
|
/*@}*/ /* end of group Standard_Driver */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif //__SCUART_H__
|
|
|
|
/*** (C) COPYRIGHT 2013~2015 Nuvoton Technology Corp. ***/
|