rtt-f030/bsp/nuvoton_m451/Libraries/StdDriver/inc/can.h

176 lines
6.3 KiB
C

/**************************************************************************//**
* @file can.h
* @version V2.00
* $Revision: 9 $
* $Date: 15/08/11 10:26a $
* @brief M451 Series CAN Driver Header File
*
* @note
* Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
*
******************************************************************************/
#ifndef __CAN_H__
#define __CAN_H__
#include "M451Series.h"
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup CAN_Driver CAN Driver
@{
*/
/** @addtogroup CAN_EXPORTED_CONSTANTS CAN Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* CAN Test Mode Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define CAN_NORMAL_MODE 0
#define CAN_BASIC_MODE 1
/*---------------------------------------------------------------------------------------------------------*/
/* Message ID Type Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define CAN_STD_ID 0
#define CAN_EXT_ID 1
/*---------------------------------------------------------------------------------------------------------*/
/* Message Frame Type Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define CAN_REMOTE_FRAME 0
#define CAN_DATA_FRAME 1
/*---------------------------------------------------------------------------------------------------------*/
/* CAN message structure */
/*---------------------------------------------------------------------------------------------------------*/
typedef struct
{
uint32_t IdType;
uint32_t FrameType;
uint32_t Id;
uint8_t DLC;
uint8_t Data[8];
} STR_CANMSG_T;
/*---------------------------------------------------------------------------------------------------------*/
/* CAN mask message structure */
/*---------------------------------------------------------------------------------------------------------*/
typedef struct
{
uint8_t u8Xtd;
uint8_t u8Dir;
uint32_t u32Id;
uint8_t u8IdType;
} STR_CANMASK_T;
#define MSG(id) (id)
/*@}*/ /* end of group CAN_EXPORTED_CONSTANTS */
/** @addtogroup CAN_EXPORTED_FUNCTIONS CAN Exported Functions
@{
*/
/**
* @brief Get interrupt status.
*
* @param[in] can The base address of can module.
*
* @return CAN module status register value.
*
* @details Status Interrupt is generated by bits BOff (CAN_STATUS[7]), EWarn (CAN_STATUS[6]),
* EPass (CAN_STATUS[5]), RxOk (CAN_STATUS[4]), TxOk (CAN_STATUS[3]), and LEC (CAN_STATUS[2:0]).
*/
#define CAN_GET_INT_STATUS(can) ((can)->STATUS)
/**
* @brief Get specified interrupt pending status.
*
* @param[in] can The base address of can module.
*
* @return The source of the interrupt.
*
* @details If several interrupts are pending, the CAN Interrupt Register will point to the pending interrupt
* with the highest priority, disregarding their chronological order.
*/
#define CAN_GET_INT_PENDING_STATUS(can) ((can)->IIDR)
/**
* @brief Disable wake-up function.
*
* @param[in] can The base address of can module.
*
* @return None
*
* @details The macro is used to disable wake-up function.
*/
#define CAN_DISABLE_WAKEUP(can) ((can)->WU_EN = 0)
/**
* @brief Enable wake-up function.
*
* @param[in] can The base address of can module.
*
* @return None
*
* @details User can wake-up system when there is a falling edge in the CAN_Rx pin.
*/
#define CAN_ENABLE_WAKEUP(can) ((can)->WU_EN = CAN_WUEN_WAKUP_EN_Msk)
/**
* @brief Get specified Message Object new data into bit value.
*
* @param[in] can The base address of can module.
* @param[in] u32MsgNum Specified Message Object number, valid value are from 0 to 31.
*
* @return Specified Message Object new data into bit value.
*
* @details The NewDat bit (CAN_IFn_MCON[15]) of a specific Message Object can be set/reset by the software through the IFn Message Interface Registers
* or by the Message Handler after reception of a Data Frame or after a successful transmission.
*/
#define CAN_GET_NEW_DATA_IN_BIT(can, u32MsgNum) ((u32MsgNum) < 16 ? (can)->NDAT1 & (1 << (u32MsgNum)) : (can)->NDAT2 & (1 << ((u32MsgNum)-16)))
/*---------------------------------------------------------------------------------------------------------*/
/* Define CAN functions prototype */
/*---------------------------------------------------------------------------------------------------------*/
uint32_t CAN_SetBaudRate(CAN_T *tCAN, uint32_t u32BaudRate);
uint32_t CAN_Open(CAN_T *tCAN, uint32_t u32BaudRate, uint32_t u32Mode);
void CAN_Close(CAN_T *tCAN);
void CAN_CLR_INT_PENDING_BIT(CAN_T *tCAN, uint8_t u32MsgNum);
void CAN_EnableInt(CAN_T *tCAN, uint32_t u32Mask);
void CAN_DisableInt(CAN_T *tCAN, uint32_t u32Mask);
int32_t CAN_Transmit(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg);
int32_t CAN_Receive(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg);
int32_t CAN_SetMultiRxMsg(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32MsgCount, uint32_t u32IDType, uint32_t u32ID);
int32_t CAN_SetRxMsg(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32IDType, uint32_t u32ID);
int32_t CAN_SetRxMsgAndMsk(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32IDType, uint32_t u32ID, uint32_t u32IDMask);
int32_t CAN_SetTxMsg(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg);
int32_t CAN_TriggerTxMsg(CAN_T *tCAN, uint32_t u32MsgNum);
/*@}*/ /* end of group CAN_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group CAN_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif //__CAN_H__
/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/