707 lines
23 KiB
C
707 lines
23 KiB
C
//*****************************************************************************
|
|
//
|
|
// ssi.c - Driver for Synchronous Serial Interface.
|
|
//
|
|
// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup ssi_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_memmap.h"
|
|
#include "inc/hw_ssi.h"
|
|
#include "inc/hw_types.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/interrupt.h"
|
|
#include "driverlib/ssi.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures the synchronous serial interface.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param ulSSIClk is the rate of the clock supplied to the SSI module.
|
|
//! \param ulProtocol specifies the data transfer protocol.
|
|
//! \param ulMode specifies the mode of operation.
|
|
//! \param ulBitRate specifies the clock rate.
|
|
//! \param ulDataWidth specifies number of bits transferred per frame.
|
|
//!
|
|
//! This function configures the synchronous serial interface. It sets
|
|
//! the SSI protocol, mode of operation, bit rate, and data width.
|
|
//!
|
|
//! The \e ulProtocol parameter defines the data frame format. The
|
|
//! \e ulProtocol parameter can be one of the following values:
|
|
//! \b SSI_FRF_MOTO_MODE_0, \b SSI_FRF_MOTO_MODE_1, \b SSI_FRF_MOTO_MODE_2,
|
|
//! \b SSI_FRF_MOTO_MODE_3, \b SSI_FRF_TI, or \b SSI_FRF_NMW. The Motorola
|
|
//! frame formats imply the following polarity and phase configurations:
|
|
//!
|
|
//! <pre>
|
|
//! Polarity Phase Mode
|
|
//! 0 0 SSI_FRF_MOTO_MODE_0
|
|
//! 0 1 SSI_FRF_MOTO_MODE_1
|
|
//! 1 0 SSI_FRF_MOTO_MODE_2
|
|
//! 1 1 SSI_FRF_MOTO_MODE_3
|
|
//! </pre>
|
|
//!
|
|
//! The \e ulMode parameter defines the operating mode of the SSI module. The
|
|
//! SSI module can operate as a master or slave; if a slave, the SSI can be
|
|
//! configured to disable output on its serial output line. The \e ulMode
|
|
//! parameter can be one of the following values: \b SSI_MODE_MASTER,
|
|
//! \b SSI_MODE_SLAVE, or \b SSI_MODE_SLAVE_OD.
|
|
//!
|
|
//! The \e ulBitRate parameter defines the bit rate for the SSI. This bit rate
|
|
//! must satisfy the following clock ratio criteria:
|
|
//!
|
|
//! - FSSI >= 2 * bit rate (master mode)
|
|
//! - FSSI >= 12 * bit rate (slave modes)
|
|
//!
|
|
//! where FSSI is the frequency of the clock supplied to the SSI module.
|
|
//!
|
|
//! The \e ulDataWidth parameter defines the width of the data transfers, and
|
|
//! can be a value between 4 and 16, inclusive.
|
|
//!
|
|
//! The peripheral clock will be the same as the processor clock. This will be
|
|
//! the value returned by SysCtlClockGet(), or it can be explicitly hard coded
|
|
//! if it is constant and known (to save the code/execution overhead of a call
|
|
//! to SysCtlClockGet()).
|
|
//!
|
|
//! This function replaces the original SSIConfig() API and performs the same
|
|
//! actions. A macro is provided in <tt>ssi.h</tt> to map the original API to
|
|
//! this API.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIConfigSetExpClk(unsigned long ulBase, unsigned long ulSSIClk,
|
|
unsigned long ulProtocol, unsigned long ulMode,
|
|
unsigned long ulBitRate, unsigned long ulDataWidth)
|
|
{
|
|
unsigned long ulMaxBitRate;
|
|
unsigned long ulRegVal;
|
|
unsigned long ulPreDiv;
|
|
unsigned long ulSCR;
|
|
unsigned long ulSPH_SPO;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
ASSERT((ulProtocol == SSI_FRF_MOTO_MODE_0) ||
|
|
(ulProtocol == SSI_FRF_MOTO_MODE_1) ||
|
|
(ulProtocol == SSI_FRF_MOTO_MODE_2) ||
|
|
(ulProtocol == SSI_FRF_MOTO_MODE_3) ||
|
|
(ulProtocol == SSI_FRF_TI) ||
|
|
(ulProtocol == SSI_FRF_NMW));
|
|
ASSERT((ulMode == SSI_MODE_MASTER) ||
|
|
(ulMode == SSI_MODE_SLAVE) ||
|
|
(ulMode == SSI_MODE_SLAVE_OD));
|
|
ASSERT(((ulMode == SSI_MODE_MASTER) && (ulBitRate <= (ulSSIClk / 2))) ||
|
|
((ulMode != SSI_MODE_MASTER) && (ulBitRate <= (ulSSIClk / 12))));
|
|
ASSERT((ulSSIClk / ulBitRate) <= (254 * 256));
|
|
ASSERT((ulDataWidth >= 4) && (ulDataWidth <= 16));
|
|
|
|
//
|
|
// Set the mode.
|
|
//
|
|
ulRegVal = (ulMode == SSI_MODE_SLAVE_OD) ? SSI_CR1_SOD : 0;
|
|
ulRegVal |= (ulMode == SSI_MODE_MASTER) ? 0 : SSI_CR1_MS;
|
|
HWREG(ulBase + SSI_O_CR1) = ulRegVal;
|
|
|
|
//
|
|
// Set the clock predivider.
|
|
//
|
|
ulMaxBitRate = ulSSIClk / ulBitRate;
|
|
ulPreDiv = 0;
|
|
do
|
|
{
|
|
ulPreDiv += 2;
|
|
ulSCR = (ulMaxBitRate / ulPreDiv) - 1;
|
|
}
|
|
while(ulSCR > 255);
|
|
HWREG(ulBase + SSI_O_CPSR) = ulPreDiv;
|
|
|
|
//
|
|
// Set protocol and clock rate.
|
|
//
|
|
ulSPH_SPO = (ulProtocol & 3) << 6;
|
|
ulProtocol &= SSI_CR0_FRF_M;
|
|
ulRegVal = (ulSCR << 8) | ulSPH_SPO | ulProtocol | (ulDataWidth - 1);
|
|
HWREG(ulBase + SSI_O_CR0) = ulRegVal;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the synchronous serial interface.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//!
|
|
//! This function enables operation of the synchronous serial interface. The
|
|
//! synchronous serial interface must be configured before it is enabled.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIEnable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Read-modify-write the enable bit.
|
|
//
|
|
HWREG(ulBase + SSI_O_CR1) |= SSI_CR1_SSE;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the synchronous serial interface.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//!
|
|
//! This function disables operation of the synchronous serial interface.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIDisable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Read-modify-write the enable bit.
|
|
//
|
|
HWREG(ulBase + SSI_O_CR1) &= ~(SSI_CR1_SSE);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers an interrupt handler for the synchronous serial interface.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
//! synchronous serial interface interrupt occurs.
|
|
//!
|
|
//! This sets the handler to be called when an SSI interrupt
|
|
//! occurs. This will enable the global interrupt in the interrupt controller;
|
|
//! specific SSI interrupts must be enabled via SSIIntEnable(). If necessary,
|
|
//! it is the interrupt handler's responsibility to clear the interrupt source
|
|
//! via SSIIntClear().
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIIntRegister(unsigned long ulBase, void (*pfnHandler)(void))
|
|
{
|
|
unsigned long ulInt;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Determine the interrupt number based on the SSI port.
|
|
//
|
|
ulInt = (ulBase == SSI0_BASE) ? INT_SSI0 : INT_SSI1;
|
|
|
|
//
|
|
// Register the interrupt handler, returning an error if an error occurs.
|
|
//
|
|
IntRegister(ulInt, pfnHandler);
|
|
|
|
//
|
|
// Enable the synchronous serial interface interrupt.
|
|
//
|
|
IntEnable(ulInt);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters an interrupt handler for the synchronous serial interface.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//!
|
|
//! This function will clear the handler to be called when a SSI
|
|
//! interrupt occurs. This will also mask off the interrupt in the interrupt
|
|
//! controller so that the interrupt handler no longer is called.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIIntUnregister(unsigned long ulBase)
|
|
{
|
|
unsigned long ulInt;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Determine the interrupt number based on the SSI port.
|
|
//
|
|
ulInt = (ulBase == SSI0_BASE) ? INT_SSI0 : INT_SSI1;
|
|
|
|
//
|
|
// Disable the interrupt.
|
|
//
|
|
IntDisable(ulInt);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(ulInt);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables individual SSI interrupt sources.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled.
|
|
//!
|
|
//! Enables the indicated SSI interrupt sources. Only the sources that are
|
|
//! enabled can be reflected to the processor interrupt; disabled sources have
|
|
//! no effect on the processor. The \e ulIntFlags parameter can be any of the
|
|
//! \b SSI_TXFF, \b SSI_RXFF, \b SSI_RXTO, or \b SSI_RXOR values.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIIntEnable(unsigned long ulBase, unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Enable the specified interrupts.
|
|
//
|
|
HWREG(ulBase + SSI_O_IM) |= ulIntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables individual SSI interrupt sources.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled.
|
|
//!
|
|
//! Disables the indicated SSI interrupt sources. The \e ulIntFlags parameter
|
|
//! can be any of the \b SSI_TXFF, \b SSI_RXFF, \b SSI_RXTO, or \b SSI_RXOR
|
|
//! values.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIIntDisable(unsigned long ulBase, unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Disable the specified interrupts.
|
|
//
|
|
HWREG(ulBase + SSI_O_IM) &= ~(ulIntFlags);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current interrupt status.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param bMasked is \b false if the raw interrupt status is required or
|
|
//! \b true if the masked interrupt status is required.
|
|
//!
|
|
//! This function returns the interrupt status for the SSI module. Either the
|
|
//! raw interrupt status or the status of interrupts that are allowed to
|
|
//! reflect to the processor can be returned.
|
|
//!
|
|
//! \return The current interrupt status, enumerated as a bit field of
|
|
//! \b SSI_TXFF, \b SSI_RXFF, \b SSI_RXTO, and \b SSI_RXOR.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
SSIIntStatus(unsigned long ulBase, tBoolean bMasked)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return(HWREG(ulBase + SSI_O_MIS));
|
|
}
|
|
else
|
|
{
|
|
return(HWREG(ulBase + SSI_O_RIS));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears SSI interrupt sources.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared.
|
|
//!
|
|
//! The specified SSI interrupt sources are cleared so that they no longer
|
|
//! assert. This function must be called in the interrupt handler to keep the
|
|
//! interrupts from being recognized again immediately upon exit. The
|
|
//! \e ulIntFlags parameter can consist of either or both the \b SSI_RXTO and
|
|
//! \b SSI_RXOR values.
|
|
//!
|
|
//! \note Since there is a write buffer in the Cortex-M3 processor, it may take
|
|
//! several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (since NVIC still sees the interrupt source
|
|
//! asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIIntClear(unsigned long ulBase, unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Clear the requested interrupt sources.
|
|
//
|
|
HWREG(ulBase + SSI_O_ICR) = ulIntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Puts a data element into the SSI transmit FIFO.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param ulData is the data to be transmitted over the SSI interface.
|
|
//!
|
|
//! This function places the supplied data into the transmit FIFO of the
|
|
//! specified SSI module.
|
|
//!
|
|
//! \note The upper 32 - N bits of the \e ulData are discarded by the hardware,
|
|
//! where N is the data width as configured by SSIConfigSetExpClk(). For
|
|
//! example, if the interface is configured for 8-bit data width, the upper 24
|
|
//! bits of \e ulData are discarded.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIDataPut(unsigned long ulBase, unsigned long ulData)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
ASSERT((ulData & (0xfffffffe << (HWREG(ulBase + SSI_O_CR0) &
|
|
SSI_CR0_DSS_M))) == 0);
|
|
|
|
//
|
|
// Wait until there is space.
|
|
//
|
|
while(!(HWREG(ulBase + SSI_O_SR) & SSI_SR_TNF))
|
|
{
|
|
}
|
|
|
|
//
|
|
// Write the data to the SSI.
|
|
//
|
|
HWREG(ulBase + SSI_O_DR) = ulData;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Puts a data element into the SSI transmit FIFO.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param ulData is the data to be transmitted over the SSI interface.
|
|
//!
|
|
//! This function places the supplied data into the transmit FIFO of the
|
|
//! specified SSI module. If there is no space in the FIFO, then this function
|
|
//! returns a zero.
|
|
//!
|
|
//! This function replaces the original SSIDataNonBlockingPut() API and
|
|
//! performs the same actions. A macro is provided in <tt>ssi.h</tt> to map
|
|
//! the original API to this API.
|
|
//!
|
|
//! \note The upper 32 - N bits of the \e ulData are discarded by the hardware,
|
|
//! where N is the data width as configured by SSIConfigSetExpClk(). For
|
|
//! example, if the interface is configured for 8-bit data width, the upper 24
|
|
//! bits of \e ulData are discarded.
|
|
//!
|
|
//! \return Returns the number of elements written to the SSI transmit FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
SSIDataPutNonBlocking(unsigned long ulBase, unsigned long ulData)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
ASSERT((ulData & (0xfffffffe << (HWREG(ulBase + SSI_O_CR0) &
|
|
SSI_CR0_DSS_M))) == 0);
|
|
|
|
//
|
|
// Check for space to write.
|
|
//
|
|
if(HWREG(ulBase + SSI_O_SR) & SSI_SR_TNF)
|
|
{
|
|
HWREG(ulBase + SSI_O_DR) = ulData;
|
|
return(1);
|
|
}
|
|
else
|
|
{
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets a data element from the SSI receive FIFO.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param pulData is a pointer to a storage location for data that was
|
|
//! received over the SSI interface.
|
|
//!
|
|
//! This function gets received data from the receive FIFO of the specified
|
|
//! SSI module and places that data into the location specified by the
|
|
//! \e pulData parameter.
|
|
//!
|
|
//! \note Only the lower N bits of the value written to \e pulData contain
|
|
//! valid data, where N is the data width as configured by
|
|
//! SSIConfigSetExpClk(). For example, if the interface is configured for
|
|
//! 8-bit data width, only the lower 8 bits of the value written to \e pulData
|
|
//! contain valid data.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIDataGet(unsigned long ulBase, unsigned long *pulData)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Wait until there is data to be read.
|
|
//
|
|
while(!(HWREG(ulBase + SSI_O_SR) & SSI_SR_RNE))
|
|
{
|
|
}
|
|
|
|
//
|
|
// Read data from SSI.
|
|
//
|
|
*pulData = HWREG(ulBase + SSI_O_DR);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets a data element from the SSI receive FIFO.
|
|
//!
|
|
//! \param ulBase specifies the SSI module base address.
|
|
//! \param pulData is a pointer to a storage location for data that was
|
|
//! received over the SSI interface.
|
|
//!
|
|
//! This function gets received data from the receive FIFO of the specified SSI
|
|
//! module and places that data into the location specified by the \e ulData
|
|
//! parameter. If there is no data in the FIFO, then this function returns a
|
|
//! zero.
|
|
//!
|
|
//! This function replaces the original SSIDataNonBlockingGet() API and
|
|
//! performs the same actions. A macro is provided in <tt>ssi.h</tt> to map
|
|
//! the original API to this API.
|
|
//!
|
|
//! \note Only the lower N bits of the value written to \e pulData contain
|
|
//! valid data, where N is the data width as configured by
|
|
//! SSIConfigSetExpClk(). For example, if the interface is configured for
|
|
//! 8-bit data width, only the lower 8 bits of the value written to \e pulData
|
|
//! contain valid data.
|
|
//!
|
|
//! \return Returns the number of elements read from the SSI receive FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
SSIDataGetNonBlocking(unsigned long ulBase, unsigned long *pulData)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Check for data to read.
|
|
//
|
|
if(HWREG(ulBase + SSI_O_SR) & SSI_SR_RNE)
|
|
{
|
|
*pulData = HWREG(ulBase + SSI_O_DR);
|
|
return(1);
|
|
}
|
|
else
|
|
{
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enable SSI DMA operation.
|
|
//!
|
|
//! \param ulBase is the base address of the SSI port.
|
|
//! \param ulDMAFlags is a bit mask of the DMA features to enable.
|
|
//!
|
|
//! The specified SSI DMA features are enabled. The SSI can be
|
|
//! configured to use DMA for transmit and/or receive data transfers.
|
|
//! The \e ulDMAFlags parameter is the logical OR of any of the following
|
|
//! values:
|
|
//!
|
|
//! - SSI_DMA_RX - enable DMA for receive
|
|
//! - SSI_DMA_TX - enable DMA for transmit
|
|
//!
|
|
//! \note The uDMA controller must also be set up before DMA can be used
|
|
//! with the SSI.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Set the requested bits in the UART DMA control register.
|
|
//
|
|
HWREG(ulBase + SSI_O_DMACTL) |= ulDMAFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disable SSI DMA operation.
|
|
//!
|
|
//! \param ulBase is the base address of the SSI port.
|
|
//! \param ulDMAFlags is a bit mask of the DMA features to disable.
|
|
//!
|
|
//! This function is used to disable SSI DMA features that were enabled
|
|
//! by SSIDMAEnable(). The specified SSI DMA features are disabled. The
|
|
//! \e ulDMAFlags parameter is the logical OR of any of the following values:
|
|
//!
|
|
//! - SSI_DMA_RX - disable DMA for receive
|
|
//! - SSI_DMA_TX - disable DMA for transmit
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
SSIDMADisable(unsigned long ulBase, unsigned long ulDMAFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Clear the requested bits in the UART DMA control register.
|
|
//
|
|
HWREG(ulBase + SSI_O_DMACTL) &= ~ulDMAFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Determines whether the SSI transmitter is busy or not.
|
|
//!
|
|
//! \param ulBase is the base address of the SSI port.
|
|
//!
|
|
//! Allows the caller to determine whether all transmitted bytes have cleared
|
|
//! the transmitter hardware. If \b false is returned, then the transmit FIFO
|
|
//! is empty and all bits of the last transmitted word have left the hardware
|
|
//! shift register.
|
|
//!
|
|
//! \return Returns \b true if the SSI is transmitting or \b false if all
|
|
//! transmissions are complete.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
SSIBusy(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE));
|
|
|
|
//
|
|
// Determine if the SSI is busy.
|
|
//
|
|
return((HWREG(ulBase + SSI_O_SR) & SSI_SR_BSY) ? true : false);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|