259 lines
14 KiB
C
259 lines
14 KiB
C
//*****************************************************************************
|
|
//
|
|
// adc.h - ADC headers for using the ADC driver functions.
|
|
//
|
|
// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __ADC_H__
|
|
#define __ADC_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// If building with a C++ compiler, make all of the definitions in this header
|
|
// have a C binding.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to ADCSequenceConfigure as the ulTrigger
|
|
// parameter.
|
|
//
|
|
//*****************************************************************************
|
|
#define ADC_TRIGGER_PROCESSOR 0x00000000 // Processor event
|
|
#define ADC_TRIGGER_COMP0 0x00000001 // Analog comparator 0 event
|
|
#define ADC_TRIGGER_COMP1 0x00000002 // Analog comparator 1 event
|
|
#define ADC_TRIGGER_COMP2 0x00000003 // Analog comparator 2 event
|
|
#define ADC_TRIGGER_EXTERNAL 0x00000004 // External event
|
|
#define ADC_TRIGGER_TIMER 0x00000005 // Timer event
|
|
#define ADC_TRIGGER_PWM0 0x00000006 // PWM0 event
|
|
#define ADC_TRIGGER_PWM1 0x00000007 // PWM1 event
|
|
#define ADC_TRIGGER_PWM2 0x00000008 // PWM2 event
|
|
#define ADC_TRIGGER_PWM3 0x00000009 // PWM3 event
|
|
#define ADC_TRIGGER_ALWAYS 0x0000000F // Always event
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to ADCSequenceStepConfigure as the ulConfig
|
|
// parameter.
|
|
//
|
|
//*****************************************************************************
|
|
#define ADC_CTL_TS 0x00000080 // Temperature sensor select
|
|
#define ADC_CTL_IE 0x00000040 // Interrupt enable
|
|
#define ADC_CTL_END 0x00000020 // Sequence end select
|
|
#define ADC_CTL_D 0x00000010 // Differential select
|
|
#define ADC_CTL_CH0 0x00000000 // Input channel 0
|
|
#define ADC_CTL_CH1 0x00000001 // Input channel 1
|
|
#define ADC_CTL_CH2 0x00000002 // Input channel 2
|
|
#define ADC_CTL_CH3 0x00000003 // Input channel 3
|
|
#define ADC_CTL_CH4 0x00000004 // Input channel 4
|
|
#define ADC_CTL_CH5 0x00000005 // Input channel 5
|
|
#define ADC_CTL_CH6 0x00000006 // Input channel 6
|
|
#define ADC_CTL_CH7 0x00000007 // Input channel 7
|
|
#define ADC_CTL_CH8 0x00000008 // Input channel 8
|
|
#define ADC_CTL_CH9 0x00000009 // Input channel 9
|
|
#define ADC_CTL_CH10 0x0000000A // Input channel 10
|
|
#define ADC_CTL_CH11 0x0000000B // Input channel 11
|
|
#define ADC_CTL_CH12 0x0000000C // Input channel 12
|
|
#define ADC_CTL_CH13 0x0000000D // Input channel 13
|
|
#define ADC_CTL_CH14 0x0000000E // Input channel 14
|
|
#define ADC_CTL_CH15 0x0000000F // Input channel 15
|
|
#define ADC_CTL_CMP0 0x00080000 // Select Comparator 0
|
|
#define ADC_CTL_CMP1 0x00090000 // Select Comparator 1
|
|
#define ADC_CTL_CMP2 0x000A0000 // Select Comparator 2
|
|
#define ADC_CTL_CMP3 0x000B0000 // Select Comparator 3
|
|
#define ADC_CTL_CMP4 0x000C0000 // Select Comparator 4
|
|
#define ADC_CTL_CMP5 0x000D0000 // Select Comparator 5
|
|
#define ADC_CTL_CMP6 0x000E0000 // Select Comparator 6
|
|
#define ADC_CTL_CMP7 0x000F0000 // Select Comparator 7
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to ADCComparatorConfigure as part of the
|
|
// ulConfig parameter.
|
|
//
|
|
//*****************************************************************************
|
|
#define ADC_COMP_TRIG_NONE 0x00000000 // Trigger Disabled
|
|
#define ADC_COMP_TRIG_LOW_ALWAYS \
|
|
0x00001000 // Trigger Low Always
|
|
#define ADC_COMP_TRIG_LOW_ONCE 0x00001100 // Trigger Low Once
|
|
#define ADC_COMP_TRIG_LOW_HALWAYS \
|
|
0x00001200 // Trigger Low Always (Hysteresis)
|
|
#define ADC_COMP_TRIG_LOW_HONCE 0x00001300 // Trigger Low Once (Hysteresis)
|
|
#define ADC_COMP_TRIG_MID_ALWAYS \
|
|
0x00001400 // Trigger Mid Always
|
|
#define ADC_COMP_TRIG_MID_ONCE 0x00001500 // Trigger Mid Once
|
|
#define ADC_COMP_TRIG_HIGH_ALWAYS \
|
|
0x00001C00 // Trigger High Always
|
|
#define ADC_COMP_TRIG_HIGH_ONCE 0x00001D00 // Trigger High Once
|
|
#define ADC_COMP_TRIG_HIGH_HALWAYS \
|
|
0x00001E00 // Trigger High Always (Hysteresis)
|
|
#define ADC_COMP_TRIG_HIGH_HONCE \
|
|
0x00001F00 // Trigger High Once (Hysteresis)
|
|
|
|
#define ADC_COMP_INT_NONE 0x00000000 // Interrupt Disabled
|
|
#define ADC_COMP_INT_LOW_ALWAYS \
|
|
0x00000010 // Interrupt Low Always
|
|
#define ADC_COMP_INT_LOW_ONCE 0x00000011 // Interrupt Low Once
|
|
#define ADC_COMP_INT_LOW_HALWAYS \
|
|
0x00000012 // Interrupt Low Always
|
|
// (Hysteresis)
|
|
#define ADC_COMP_INT_LOW_HONCE 0x00000013 // Interrupt Low Once (Hysteresis)
|
|
#define ADC_COMP_INT_MID_ALWAYS \
|
|
0x00000014 // Interrupt Mid Always
|
|
#define ADC_COMP_INT_MID_ONCE 0x00000015 // Interrupt Mid Once
|
|
#define ADC_COMP_INT_HIGH_ALWAYS \
|
|
0x0000001C // Interrupt High Always
|
|
#define ADC_COMP_INT_HIGH_ONCE 0x0000001D // Interrupt High Once
|
|
#define ADC_COMP_INT_HIGH_HALWAYS \
|
|
0x0000001E // Interrupt High Always
|
|
// (Hysteresis)
|
|
#define ADC_COMP_INT_HIGH_HONCE \
|
|
0x0000001F // Interrupt High Once (Hysteresis)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be used to modify the sequence number passed to
|
|
// ADCProcessorTrigger in order to get cross-module synchronous processor
|
|
// triggers.
|
|
//
|
|
//*****************************************************************************
|
|
#define ADC_TRIGGER_WAIT 0x08000000 // Wait for the synchronous trigger
|
|
#define ADC_TRIGGER_SIGNAL 0x80000000 // Signal the synchronous trigger
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to ADCPhaseDelaySet as the ulPhase parameter and
|
|
// returned from ADCPhaseDelayGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define ADC_PHASE_0 0x00000000 // 0 degrees
|
|
#define ADC_PHASE_22_5 0x00000001 // 22.5 degrees
|
|
#define ADC_PHASE_45 0x00000002 // 45 degrees
|
|
#define ADC_PHASE_67_5 0x00000003 // 67.5 degrees
|
|
#define ADC_PHASE_90 0x00000004 // 90 degrees
|
|
#define ADC_PHASE_112_5 0x00000005 // 112.5 degrees
|
|
#define ADC_PHASE_135 0x00000006 // 135 degrees
|
|
#define ADC_PHASE_157_5 0x00000007 // 157.5 degrees
|
|
#define ADC_PHASE_180 0x00000008 // 180 degrees
|
|
#define ADC_PHASE_202_5 0x00000009 // 202.5 degrees
|
|
#define ADC_PHASE_225 0x0000000A // 225 degrees
|
|
#define ADC_PHASE_247_5 0x0000000B // 247.5 degrees
|
|
#define ADC_PHASE_270 0x0000000C // 270 degrees
|
|
#define ADC_PHASE_292_5 0x0000000D // 292.5 degrees
|
|
#define ADC_PHASE_315 0x0000000E // 315 degrees
|
|
#define ADC_PHASE_337_5 0x0000000F // 337.5 degrees
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to ADCReferenceSet as the ulRef parameter.
|
|
//
|
|
//*****************************************************************************
|
|
#define ADC_REF_INT 0x00000000 // Internal reference
|
|
#define ADC_REF_EXT_3V 0x00000001 // External 3V reference
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Prototypes for the APIs.
|
|
//
|
|
//*****************************************************************************
|
|
extern void ADCIntRegister(unsigned long ulBase, unsigned long ulSequenceNum,
|
|
void (*pfnHandler)(void));
|
|
extern void ADCIntUnregister(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCIntDisable(unsigned long ulBase, unsigned long ulSequenceNum);
|
|
extern void ADCIntEnable(unsigned long ulBase, unsigned long ulSequenceNum);
|
|
extern unsigned long ADCIntStatus(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
tBoolean bMasked);
|
|
extern void ADCIntClear(unsigned long ulBase, unsigned long ulSequenceNum);
|
|
extern void ADCSequenceEnable(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCSequenceDisable(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCSequenceConfigure(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
unsigned long ulTrigger,
|
|
unsigned long ulPriority);
|
|
extern void ADCSequenceStepConfigure(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
unsigned long ulStep,
|
|
unsigned long ulConfig);
|
|
extern long ADCSequenceOverflow(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCSequenceOverflowClear(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern long ADCSequenceUnderflow(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCSequenceUnderflowClear(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern long ADCSequenceDataGet(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
unsigned long *pulBuffer);
|
|
extern void ADCProcessorTrigger(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCSoftwareOversampleConfigure(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
unsigned long ulFactor);
|
|
extern void ADCSoftwareOversampleStepConfigure(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
unsigned long ulStep,
|
|
unsigned long ulConfig);
|
|
extern void ADCSoftwareOversampleDataGet(unsigned long ulBase,
|
|
unsigned long ulSequenceNum,
|
|
unsigned long *pulBuffer,
|
|
unsigned long ulCount);
|
|
extern void ADCHardwareOversampleConfigure(unsigned long ulBase,
|
|
unsigned long ulFactor);
|
|
extern void ADCComparatorConfigure(unsigned long ulBase, unsigned long ulComp,
|
|
unsigned long ulConfig);
|
|
extern void ADCComparatorRegionSet(unsigned long ulBase, unsigned long ulComp,
|
|
unsigned long ulLowRef,
|
|
unsigned long ulHighRef);
|
|
extern void ADCComparatorReset(unsigned long ulBase, unsigned long ulComp,
|
|
tBoolean bTrigger, tBoolean bInterrupt);
|
|
extern void ADCComparatorIntDisable(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern void ADCComparatorIntEnable(unsigned long ulBase,
|
|
unsigned long ulSequenceNum);
|
|
extern unsigned long ADCComparatorIntStatus(unsigned long ulBase);
|
|
extern void ADCComparatorIntClear(unsigned long ulBase,
|
|
unsigned long ulStatus);
|
|
extern void ADCReferenceSet(unsigned long ulBase, unsigned long ulRef);
|
|
extern unsigned long ADCReferenceGet(unsigned long ulBase);
|
|
extern void ADCPhaseDelaySet(unsigned long ulBase, unsigned long ulPhase);
|
|
extern unsigned long ADCPhaseDelayGet(unsigned long ulBase);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Mark the end of the C bindings section for C++ compilers.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __ADC_H__
|