115 lines
5.1 KiB
C
115 lines
5.1 KiB
C
/*
|
|
* File : at91_mci.h
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2006, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://openlab.rt-thread.com/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2011-06-09 weety first version
|
|
*/
|
|
|
|
#ifndef __AT91_MCI_H__
|
|
#define __AT91_MCI_H__
|
|
|
|
#define AT91_MCI_CR 0x00 /* Control Register */
|
|
#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
|
|
#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
|
|
#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
|
|
#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
|
|
#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
|
|
|
|
#define AT91_MCI_MR 0x04 /* Mode Register */
|
|
#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
|
|
#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
|
|
#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
|
|
#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
|
|
#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
|
|
#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
|
|
#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
|
|
#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
|
|
|
|
#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
|
|
#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
|
|
#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
|
|
#define AT91_MCI_DTOMUL_1 (0 << 4)
|
|
#define AT91_MCI_DTOMUL_16 (1 << 4)
|
|
#define AT91_MCI_DTOMUL_128 (2 << 4)
|
|
#define AT91_MCI_DTOMUL_256 (3 << 4)
|
|
#define AT91_MCI_DTOMUL_1K (4 << 4)
|
|
#define AT91_MCI_DTOMUL_4K (5 << 4)
|
|
#define AT91_MCI_DTOMUL_64K (6 << 4)
|
|
#define AT91_MCI_DTOMUL_1M (7 << 4)
|
|
|
|
#define AT91_MCI_SDCR 0x0c /* SD Card Register */
|
|
#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
|
|
#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
|
|
|
|
#define AT91_MCI_ARGR 0x10 /* Argument Register */
|
|
|
|
#define AT91_MCI_CMDR 0x14 /* Command Register */
|
|
#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
|
|
#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
|
|
#define AT91_MCI_RSPTYP_NONE (0 << 6)
|
|
#define AT91_MCI_RSPTYP_48 (1 << 6)
|
|
#define AT91_MCI_RSPTYP_136 (2 << 6)
|
|
#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
|
|
#define AT91_MCI_SPCMD_NONE (0 << 8)
|
|
#define AT91_MCI_SPCMD_INIT (1 << 8)
|
|
#define AT91_MCI_SPCMD_SYNC (2 << 8)
|
|
#define AT91_MCI_SPCMD_ICMD (4 << 8)
|
|
#define AT91_MCI_SPCMD_IRESP (5 << 8)
|
|
#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
|
|
#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
|
|
#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
|
|
#define AT91_MCI_TRCMD_NONE (0 << 16)
|
|
#define AT91_MCI_TRCMD_START (1 << 16)
|
|
#define AT91_MCI_TRCMD_STOP (2 << 16)
|
|
#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
|
|
#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
|
|
#define AT91_MCI_TRTYP_BLOCK (0 << 19)
|
|
#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
|
|
#define AT91_MCI_TRTYP_STREAM (2 << 19)
|
|
|
|
#define AT91_MCI_BLKR 0x18 /* Block Register */
|
|
#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
|
|
#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */
|
|
|
|
#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
|
|
#define AT91_MCR_RDR 0x30 /* Receive Data Register */
|
|
#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
|
|
|
|
#define AT91_MCI_SR 0x40 /* Status Register */
|
|
#define AT91_MCI_CMDRDY (1U << 0) /* Command Ready */
|
|
#define AT91_MCI_RXRDY (1U << 1) /* Receiver Ready */
|
|
#define AT91_MCI_TXRDY (1U << 2) /* Transmit Ready */
|
|
#define AT91_MCI_BLKE (1U << 3) /* Data Block Ended */
|
|
#define AT91_MCI_DTIP (1U << 4) /* Data Transfer in Progress */
|
|
#define AT91_MCI_NOTBUSY (1U << 5) /* Data Not Busy */
|
|
#define AT91_MCI_ENDRX (1U << 6) /* End of RX Buffer */
|
|
#define AT91_MCI_ENDTX (1U << 7) /* End fo TX Buffer */
|
|
#define AT91_MCI_SDIOIRQA (1U << 8) /* SDIO Interrupt for Slot A */
|
|
#define AT91_MCI_SDIOIRQB (1U << 9) /* SDIO Interrupt for Slot B */
|
|
#define AT91_MCI_RXBUFF (1U << 14) /* RX Buffer Full */
|
|
#define AT91_MCI_TXBUFE (1U << 15) /* TX Buffer Empty */
|
|
#define AT91_MCI_RINDE (1U << 16) /* Response Index Error */
|
|
#define AT91_MCI_RDIRE (1U << 17) /* Response Direction Error */
|
|
#define AT91_MCI_RCRCE (1U << 18) /* Response CRC Error */
|
|
#define AT91_MCI_RENDE (1U << 19) /* Response End Bit Error */
|
|
#define AT91_MCI_RTOE (1U << 20) /* Reponse Time-out Error */
|
|
#define AT91_MCI_DCRCE (1U << 21) /* Data CRC Error */
|
|
#define AT91_MCI_DTOE (1U << 22) /* Data Time-out Error */
|
|
#define AT91_MCI_OVRE (1U << 30) /* Overrun */
|
|
#define AT91_MCI_UNRE (1U << 31) /* Underrun */
|
|
|
|
#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
|
|
#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
|
|
#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
|
|
|
|
extern rt_int32_t at91_mci_init(void);
|
|
|
|
#endif
|