rtt-f030

History

ItsEddy ced7d5a34f [DeviceDriver] stm32: Remove explicity clear of RXNE flag According to STM32 Manual, the USART RXNE flag will be clear automatically after read to the USART_DR register[1], so the call to USART_ClearITPendingBit is unnecessary. [1]: See RM0090 Reference Manual p.992, Bit 5		2015-04-07 21:09:22 +08:00
..
Libraries	Update SConscript	2014-05-22 21:02:13 +08:00
applications	[bsp]add gdb support for stm32f4xx	2014-08-12 18:22:04 +08:00
drivers	[DeviceDriver] stm32: Remove explicity clear of RXNE flag	2015-04-07 21:09:22 +08:00
SConscript	Re-normalizing the repo	2013-01-08 22:40:58 +08:00
SConstruct	[BSP] update MDK project file for STM32F4	2015-01-20 15:52:39 +08:00
project.uvproj	[BSP] update MDK project file for STM32F4	2015-01-20 15:58:37 +08:00
project.uvprojx	Add mdk5 project for stm32 bsps	2014-11-19 15:28:56 +08:00
readme.txt	add stm32f40x/readme.txt	2012-07-31 17:13:59 +00:00
rtconfig.h	[BSP] Update UART and GPIO driver with framework in STM32F4	2015-01-20 07:23:59 +00:00
rtconfig.py	[BSP] update MDK project file for STM32F4	2015-01-20 15:52:39 +08:00
stm32_rom.ld	[bsp]add gdb support for stm32f4xx	2014-08-12 18:22:04 +08:00
stm32_rom.sct	fixed compiling error	2012-04-14 11:41:15 +00:00
template.uvproj	update stm32f10x template.	2013-02-20 10:49:09 +08:00
template.uvprojx	Add mdk5 project for stm32 bsps	2014-11-19 15:28:56 +08:00

readme.txt

board info:
STM32F4 discovery
http://www.st.com/internet/evalboard/product/252419.jsp

note:
in drivers/stm32f4xx_conf.h
 /* Redefine the HSE value; it's equal to 8 MHz on the STM32F4-DISCOVERY Kit */
 #define HSE_VALUE    ((uint32_t)8000000)