/***************************************************************************//**
 * @file
 * @brief Low Energy Timer (LETIMER) peripheral API for EFM32.
 * @author Energy Micro AS
 * @version 1.3.0
 *******************************************************************************
 * @section License
 * <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
 *******************************************************************************
 *
 * This source code is the property of Energy Micro AS. The source and compiled
 * code may only be used on Energy Micro "EFM32" microcontrollers.
 *
 * This copyright notice may not be removed from the source code nor changed.
 *
 * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
 * obligation to support this Software. Energy Micro AS is providing the
 * Software "AS IS", with no express or implied warranties of any kind,
 * including, but not limited to, any implied warranties of merchantability
 * or fitness for any particular purpose or warranties against infringement
 * of any proprietary rights of a third party.
 *
 * Energy Micro AS will not be liable for any consequential, incidental, or
 * special damages, or any other relief, or for any claim by any third party,
 * arising from your use of this Software.
 *
 ******************************************************************************/
#ifndef __EFM32_LETIMER_H
#define __EFM32_LETIMER_H

#include <stdbool.h>
#include "efm32.h"

#ifdef __cplusplus
extern "C" {
#endif

/***************************************************************************//**
 * @addtogroup EFM32_Library
 * @{
 ******************************************************************************/

/***************************************************************************//**
 * @addtogroup LETIMER
 * @{
 ******************************************************************************/

/*******************************************************************************
 ********************************   ENUMS   ************************************
 ******************************************************************************/

/** Repeat mode. */
typedef enum
{
  /** Count until stopped by SW. */
  letimerRepeatFree     = _LETIMER_CTRL_REPMODE_FREE,
  /** Count REP0 times. */
  letimerRepeatOneshot  = _LETIMER_CTRL_REPMODE_ONESHOT,
  /**
   * Count REP0 times, if REP1 has been written to, it is loaded into
   * REP0 when REP0 is about to be decremented to 0.
   */
  letimerRepeatBuffered = _LETIMER_CTRL_REPMODE_BUFFERED,
  /**
   * Run as long as both REP0 and REP1 are not 0. Both REP0 and REP1
   * are decremented when counter underflows.
   */
  letimerRepeatDouble   = _LETIMER_CTRL_REPMODE_DOUBLE
} LETIMER_RepeatMode_TypeDef;


/** Underflow action on output. */
typedef enum
{
  /** No output action. */
  letimerUFOANone   = _LETIMER_CTRL_UFOA0_NONE,
  /** Toggle output when counter underflows. */
  letimerUFOAToggle = _LETIMER_CTRL_UFOA0_TOGGLE,
  /** Hold output one LETIMER clock cycle when counter underflows. */
  letimerUFOAPulse  = _LETIMER_CTRL_UFOA0_PULSE,
  /** Set output idle when counter underflows, and active when matching COMP1. */
  letimerUFOAPwm    = _LETIMER_CTRL_UFOA0_PWM
} LETIMER_UFOA_TypeDef;

/*******************************************************************************
 *******************************   STRUCTS   ***********************************
 ******************************************************************************/

/** LETIMER initialization structure. */
typedef struct
{
  bool                       enable;         /**< Start counting when init completed. */
  bool                       debugRun;       /**< Counter shall keep running during debug halt. */
  bool                       rtcComp0Enable; /**< Start counting on RTC COMP0 match. */
  bool                       rtcComp1Enable; /**< Start counting on RTC COMP1 match. */
  bool                       comp0Top;       /**< Load COMP0 register into CNT when counter underflows. */
  bool                       bufTop;         /**< Load COMP1 into COMP0 when REP0 reaches 0. */
  uint8_t                    out0Pol;        /**< Idle value for output 0. */
  uint8_t                    out1Pol;        /**< Idle value for output 1. */
  LETIMER_UFOA_TypeDef       ufoa0;          /**< Underflow output 0 action. */
  LETIMER_UFOA_TypeDef       ufoa1;          /**< Underflow output 1 action. */
  LETIMER_RepeatMode_TypeDef repMode;        /**< Repeat mode. */
} LETIMER_Init_TypeDef;

/** Default config for LETIMER init structure. */
#define LETIMER_INIT_DEFAULT                                                    \
  { true,               /* Enable timer when init complete. */                  \
    false,              /* Stop counter during debug halt. */                   \
    false,              /* Do not start counting on RTC COMP0 match. */         \
    false,              /* Do not start counting on RTC COMP1 match. */         \
    false,              /* Do not load COMP0 into CNT on underflow. */          \
    false,              /* Do not load COMP1 into COMP0 when REP0 reaches 0. */ \
    0,                  /* Idle value 0 for output 0. */                        \
    0,                  /* Idle value 0 for output 1. */                        \
    letimerUFOANone,    /* No action on underflow on output 0. */               \
    letimerUFOANone,    /* No action on underflow on output 1. */               \
    letimerRepeatFree   /* Count until stopped by SW. */                        \
  }


/*******************************************************************************
 *****************************   PROTOTYPES   **********************************
 ******************************************************************************/

uint32_t LETIMER_CompareGet(LETIMER_TypeDef *letimer, unsigned int comp);
void LETIMER_CompareSet(LETIMER_TypeDef *letimer,
                        unsigned int comp,
                        uint32_t value);


/***************************************************************************//**
 * @brief
 *   Get LETIMER counter value.
 *
 * @param[in] letimer
 *   Pointer to LETIMER peripheral register block.
 *
 * @return
 *   Current LETIMER counter value.
 ******************************************************************************/
static __INLINE uint32_t LETIMER_CounterGet(LETIMER_TypeDef *letimer)
{
  return(letimer->CNT);
}


void LETIMER_Enable(LETIMER_TypeDef *letimer, bool enable);
void LETIMER_FreezeEnable(LETIMER_TypeDef *letimer, bool enable);
void LETIMER_Init(LETIMER_TypeDef *letimer, const LETIMER_Init_TypeDef *init);


/***************************************************************************//**
 * @brief
 *   Clear one or more pending LETIMER interrupts.
 *
 * @param[in] letimer
 *   Pointer to LETIMER peripheral register block.
 *
 * @param[in] flags
 *   Pending LETIMER interrupt source to clear. Use a logical OR combination
 *   of valid interrupt flags for the LETIMER module (LETIMER_IF_nnn).
 ******************************************************************************/
static __INLINE void LETIMER_IntClear(LETIMER_TypeDef *letimer, uint32_t flags)
{
  letimer->IFC = flags;
}


/***************************************************************************//**
 * @brief
 *   Disable one or more LETIMER interrupts.
 *
 * @param[in] letimer
 *   Pointer to LETIMER peripheral register block.
 *
 * @param[in] flags
 *   LETIMER interrupt sources to disable. Use a logical OR combination of
 *   valid interrupt flags for the LETIMER module (LETIMER_IF_nnn).
 ******************************************************************************/
static __INLINE void LETIMER_IntDisable(LETIMER_TypeDef *letimer, uint32_t flags)
{
  letimer->IEN &= ~(flags);
}


/***************************************************************************//**
 * @brief
 *   Enable one or more LETIMER interrupts.
 *
 * @note
 *   Depending on the use, a pending interrupt may already be set prior to
 *   enabling the interrupt. Consider using LETIMER_IntClear() prior to enabling
 *   if such a pending interrupt should be ignored.
 *
 * @param[in] letimer
 *   Pointer to LETIMER peripheral register block.
 *
 * @param[in] flags
 *   LETIMER interrupt sources to enable. Use a logical OR combination of
 *   valid interrupt flags for the LETIMER module (LETIMER_IF_nnn).
 ******************************************************************************/
static __INLINE void LETIMER_IntEnable(LETIMER_TypeDef *letimer, uint32_t flags)
{
  letimer->IEN |= flags;
}


/***************************************************************************//**
 * @brief
 *   Get pending LETIMER interrupt flags.
 *
 * @note
 *   The event bits are not cleared by the use of this function.
 *
 * @param[in] letimer
 *   Pointer to LETIMER peripheral register block.
 *
 * @return
 *   LETIMER interrupt sources pending. A logical OR combination of valid
 *   interrupt flags for the LETIMER module (LETIMER_IF_nnn).
 ******************************************************************************/
static __INLINE uint32_t LETIMER_IntGet(LETIMER_TypeDef *letimer)
{
  return(letimer->IF);
}


/***************************************************************************//**
 * @brief
 *   Set one or more pending LETIMER interrupts from SW.
 *
 * @param[in] letimer
 *   Pointer to LETIMER peripheral register block.
 *
 * @param[in] flags
 *   LETIMER interrupt sources to set to pending. Use a logical OR combination
 *   of valid interrupt flags for the LETIMER module (LETIMER_IF_nnn).
 ******************************************************************************/
static __INLINE void LETIMER_IntSet(LETIMER_TypeDef *letimer, uint32_t flags)
{
  letimer->IFS = flags;
}

uint32_t LETIMER_RepeatGet(LETIMER_TypeDef *letimer, unsigned int rep);
void LETIMER_RepeatSet(LETIMER_TypeDef *letimer,
                       unsigned int rep,
                       uint32_t value);
void LETIMER_Reset(LETIMER_TypeDef *letimer);


/** @} (end addtogroup LETIMER) */
/** @} (end addtogroup EFM32_Library) */

#ifdef __cplusplus
}
#endif

#endif /* __EFM32_LETIMER_H */