/*
 * File      : mmcsd_card.h
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2006, RT-Thread Development Team
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rt-thread.org/license/LICENSE
 *
 * Change Logs:
 * Date           Author		Notes
 * 2011-07-25     weety		first version
 */

#ifndef __MMCSD_CARD_H__
#define __MMCSD_CARD_H__

#include "mmcsd_host.h"
#include "sdio.h"

#ifdef __cplusplus
extern "C" {
#endif

#define SD_SCR_BUS_WIDTH_1	(1 << 0)
#define SD_SCR_BUS_WIDTH_4	(1 << 2)

struct rt_mmcsd_cid {
	rt_uint8_t  mid;       /* ManufacturerID */
	rt_uint8_t  prv;       /* Product Revision */
	rt_uint16_t oid;       /* OEM/Application ID */
	rt_uint32_t psn;       /* Product Serial Number */
	rt_uint8_t  pnm[5];    /* Product Name */
	rt_uint8_t  reserved1;/* reserved */
	rt_uint16_t mdt;       /* Manufacturing Date */
	rt_uint8_t  crc;       /* CID CRC */
	rt_uint8_t  reserved2;/* not used, always 1 */
};

struct rt_mmcsd_csd {
	rt_uint8_t		csd_structure;	/* CSD register version */
	rt_uint8_t		taac;
	rt_uint8_t		nsac;
	rt_uint8_t		tran_speed;	/* max data transfer rate */
	rt_uint16_t		card_cmd_class;	/* card command classes */
	rt_uint8_t		rd_blk_len;	/* max read data block length */
	rt_uint8_t		rd_blk_part;
	rt_uint8_t		wr_blk_misalign;
	rt_uint8_t		rd_blk_misalign;
	rt_uint8_t		dsr_imp;	/* DSR implemented */
	rt_uint8_t		c_size_mult;	/* CSD 1.0 , device size multiplier */
	rt_uint32_t		c_size;		/* device size */
	rt_uint8_t		r2w_factor;
	rt_uint8_t		wr_blk_len;	/* max wtire data block length */
	rt_uint8_t		wr_blk_partial;
	rt_uint8_t		csd_crc;
	
};

struct rt_sd_scr {
	rt_uint8_t		sd_version;
	rt_uint8_t		sd_bus_widths;
};

struct rt_sdio_cccr {
	rt_uint8_t		sdio_version;
	rt_uint8_t		sd_version;
	rt_uint8_t		direct_cmd:1,     /*  Card Supports Direct Commands during data transfer
	                                               only SD mode, not used for SPI mode */
				multi_block:1,    /*  Card Supports Multi-Block */
				read_wait:1,      /*  Card Supports Read Wait
				                       only SD mode, not used for SPI mode */
				suspend_resume:1, /*  Card supports Suspend/Resume
				                       only SD mode, not used for SPI mode */
				s4mi:1,            /* generate interrupts during a 4-bit 
				                      multi-block data transfer */
				e4mi:1,            /*  Enable the multi-block IRQ during 
				                       4-bit transfer for the SDIO card */
				low_speed:1,      /*  Card  is  a  Low-Speed  card */
				low_speed_4:1;    /*  4-bit support for Low-Speed cards */

	rt_uint8_t		bus_width:1,     /* Support SDIO bus width, 1:4bit, 0:1bit */
				cd_disable:1,    /*  Connect[0]/Disconnect[1] the 10K-90K ohm pull-up 
				                     resistor on CD/DAT[3] (pin 1) of the card */
				power_ctrl:1,    /* Support Master Power Control */
				high_speed:1;    /* Support High-Speed  */
				
				
};

struct rt_sdio_cis {
	rt_uint16_t		manufacturer;
	rt_uint16_t		product;
	rt_uint16_t		func0_blk_size;
	rt_uint32_t		max_tran_speed;
};

#define SDIO_MAX_FUNCTIONS		7



struct rt_mmcsd_card {
	struct rt_mmcsd_host *host;
	rt_uint32_t	rca;		/* card addr */
	rt_uint32_t	resp_cid[4];	/* card CID register */
	rt_uint32_t	resp_csd[4];	/* card CSD register */
	rt_uint32_t	resp_scr[2];	/* card SCR register */

	rt_uint16_t	tacc_clks;	/* data access time by ns */
	rt_uint32_t	tacc_ns;	/* data access time by clk cycles */
	rt_uint32_t	max_data_rate;	/* max data transfer rate */
	rt_uint32_t	card_capacity;	/* card capacity, unit:KB */
	rt_uint32_t	card_blksize;	/* card block size */
	rt_uint16_t	card_type;
#define CARD_TYPE_MMC                   0 /* MMC card */
#define CARD_TYPE_SD                    1 /* SD card */
#define CARD_TYPE_SDIO                  2 /* SDIO card */
#define CARD_TYPE_SDIO_COMBO            3 /* SD combo (IO+mem) card */

	rt_uint16_t flags;
#define CARD_FLAG_HIGHSPEED  (1 << 0)   /* SDIO bus speed 50MHz */
#define CARD_FLAG_SDHC       (1 << 1)   /* SDHC card */
#define CARD_FLAG_SDXC       (1 << 2)   /* SDXC card */

	struct rt_sd_scr	scr;
	struct rt_mmcsd_csd	csd;
	rt_uint32_t     hs_max_data_rate;  /* max data transfer rate in high speed mode */

	rt_uint8_t      sdio_function_num;	/* totol number of SDIO functions */
	struct rt_sdio_cccr    cccr;  /* common card info */
	struct rt_sdio_cis     cis;  /* common tuple info */
	struct rt_sdio_function *sdio_func0;
	struct rt_sdio_function	*sdio_function[SDIO_MAX_FUNCTIONS]; /* SDIO functions (devices) */

	//struct rt_sdio_function_tuple    *tuples;  /* tuples */

};

#ifdef __cplusplus
}
#endif

#endif