; <<< Use Configuration Wizard in Context Menu >>> ;****************************************************************************** ; ; startup_rvmdk.S - Startup code for use with Keil's uVision. ; ; Copyright (c) 2011 Texas Instruments Incorporated. All rights reserved. ; Software License Agreement ; ; Texas Instruments (TI) is supplying this software for use solely and ; exclusively on TI's microcontroller products. The software is owned by ; TI and/or its suppliers, and is protected under applicable copyright ; laws. You may not combine this software with "viral" open-source ; software in order to form a larger program. ; ; THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. ; NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT ; NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ; A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY ; CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL ; DAMAGES, FOR ANY REASON WHATSOEVER. ; ; This is part of revision 8049 of the EK-LM4F232 Firmware Package. ; ;****************************************************************************** ;****************************************************************************** ; ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> ; ;****************************************************************************** Stack EQU 0x00000400 ;****************************************************************************** ; ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> ; ;****************************************************************************** Heap EQU 0x00000000 ;****************************************************************************** ; ; Allocate space for the stack. ; ;****************************************************************************** AREA STACK, NOINIT, READWRITE, ALIGN=3 StackMem SPACE Stack __initial_sp ;****************************************************************************** ; ; Allocate space for the heap. ; ;****************************************************************************** AREA HEAP, NOINIT, READWRITE, ALIGN=3 __heap_base HeapMem SPACE Heap __heap_limit IMPORT PendSV_Handler IMPORT rt_hw_timer_handler IMPORT rt_hw_uart_isr_1 IMPORT rt_hw_eth_handler IMPORT HardFault_Handler ;****************************************************************************** ; ; Indicate that the code in this file preserves 8-byte alignment of the stack. ; ;****************************************************************************** PRESERVE8 ;****************************************************************************** ; ; Place code into the reset code section. ; ;****************************************************************************** AREA RESET, CODE, READONLY THUMB ;****************************************************************************** ; ; The vector table. ; ;****************************************************************************** EXPORT __Vectors __Vectors DCD StackMem + Stack ; Top of Stack DCD Reset_Handler ; Reset Handler DCD NmiSR ; NMI Handler DCD HardFault_Handler ; Hard Fault Handler DCD IntDefaultHandler ; The MPU fault handler DCD IntDefaultHandler ; The bus fault handler DCD IntDefaultHandler ; The usage fault handler DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD IntDefaultHandler ; SVCall handler DCD IntDefaultHandler ; Debug monitor handler DCD 0 ; Reserved DCD PendSV_Handler ; The PendSV handler DCD rt_hw_timer_handler ; The SysTick handler DCD IntDefaultHandler ; GPIO Port A DCD IntDefaultHandler ; GPIO Port B DCD IntDefaultHandler ; GPIO Port C DCD IntDefaultHandler ; GPIO Port D DCD IntDefaultHandler ; GPIO Port E DCD rt_hw_uart_isr_1 ; UART0 Rx and Tx DCD IntDefaultHandler ; UART1 Rx and Tx DCD IntDefaultHandler ; SSI0 Rx and Tx DCD IntDefaultHandler ; I2C0 Master and Slave DCD IntDefaultHandler ; PWM Fault DCD IntDefaultHandler ; PWM Generator 0 DCD IntDefaultHandler ; PWM Generator 1 DCD IntDefaultHandler ; PWM Generator 2 DCD IntDefaultHandler ; Quadrature Encoder 0 DCD IntDefaultHandler ; ADC Sequence 0 DCD IntDefaultHandler ; ADC Sequence 1 DCD IntDefaultHandler ; ADC Sequence 2 DCD IntDefaultHandler ; ADC Sequence 3 DCD IntDefaultHandler ; Watchdog timer DCD IntDefaultHandler ; Timer 0 subtimer A DCD IntDefaultHandler ; Timer 0 subtimer B DCD IntDefaultHandler ; Timer 1 subtimer A DCD IntDefaultHandler ; Timer 1 subtimer B DCD IntDefaultHandler ; Timer 2 subtimer A DCD IntDefaultHandler ; Timer 2 subtimer B DCD IntDefaultHandler ; Analog Comparator 0 DCD IntDefaultHandler ; Analog Comparator 1 DCD IntDefaultHandler ; Analog Comparator 2 DCD IntDefaultHandler ; System Control (PLL, OSC, BO) DCD IntDefaultHandler ; FLASH Control DCD IntDefaultHandler ; GPIO Port F DCD IntDefaultHandler ; GPIO Port G DCD IntDefaultHandler ; GPIO Port H DCD IntDefaultHandler ; UART2 Rx and Tx DCD IntDefaultHandler ; SSI1 Rx and Tx DCD IntDefaultHandler ; Timer 3 subtimer A DCD IntDefaultHandler ; Timer 3 subtimer B DCD IntDefaultHandler ; I2C1 Master and Slave DCD IntDefaultHandler ; Quadrature Encoder 1 DCD IntDefaultHandler ; CAN0 DCD IntDefaultHandler ; CAN1 DCD IntDefaultHandler ; CAN2 DCD rt_hw_eth_handler ; Ethernet DCD IntDefaultHandler ; Hibernate DCD IntDefaultHandler ; USB0 DCD IntDefaultHandler ; PWM Generator 3 DCD IntDefaultHandler ; uDMA Software Transfer DCD IntDefaultHandler ; uDMA Error DCD IntDefaultHandler ; ADC1 Sequence 0 DCD IntDefaultHandler ; ADC1 Sequence 1 DCD IntDefaultHandler ; ADC1 Sequence 2 DCD IntDefaultHandler ; ADC1 Sequence 3 DCD IntDefaultHandler ; I2S0 DCD IntDefaultHandler ; External Bus Interface 0 DCD IntDefaultHandler ; GPIO Port J DCD IntDefaultHandler ; GPIO Port K DCD IntDefaultHandler ; GPIO Port L DCD IntDefaultHandler ; SSI2 Rx and Tx DCD IntDefaultHandler ; SSI3 Rx and Tx DCD IntDefaultHandler ; UART3 Rx and Tx DCD IntDefaultHandler ; UART4 Rx and Tx DCD IntDefaultHandler ; UART5 Rx and Tx DCD IntDefaultHandler ; UART6 Rx and Tx DCD IntDefaultHandler ; UART7 Rx and Tx DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD IntDefaultHandler ; I2C2 Master and Slave DCD IntDefaultHandler ; I2C3 Master and Slave DCD IntDefaultHandler ; Timer 4 subtimer A DCD IntDefaultHandler ; Timer 4 subtimer B DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD 0 ; Reserved DCD IntDefaultHandler ; Timer 5 subtimer A DCD IntDefaultHandler ; Timer 5 subtimer B DCD IntDefaultHandler ; Wide Timer 0 subtimer A DCD IntDefaultHandler ; Wide Timer 0 subtimer B DCD IntDefaultHandler ; Wide Timer 1 subtimer A DCD IntDefaultHandler ; Wide Timer 1 subtimer B DCD IntDefaultHandler ; Wide Timer 2 subtimer A DCD IntDefaultHandler ; Wide Timer 2 subtimer B DCD IntDefaultHandler ; Wide Timer 3 subtimer A DCD IntDefaultHandler ; Wide Timer 3 subtimer B DCD IntDefaultHandler ; Wide Timer 4 subtimer A DCD IntDefaultHandler ; Wide Timer 4 subtimer B DCD IntDefaultHandler ; Wide Timer 5 subtimer A DCD IntDefaultHandler ; Wide Timer 5 subtimer B DCD IntDefaultHandler ; FPU DCD IntDefaultHandler ; PECI 0 DCD IntDefaultHandler ; LPC 0 DCD IntDefaultHandler ; I2C4 Master and Slave DCD IntDefaultHandler ; I2C5 Master and Slave DCD IntDefaultHandler ; GPIO Port M DCD IntDefaultHandler ; GPIO Port N DCD IntDefaultHandler ; Quadrature Encoder 2 DCD IntDefaultHandler ; Fan 0 DCD 0 ; Reserved DCD IntDefaultHandler ; GPIO Port P (Summary or P0) DCD IntDefaultHandler ; GPIO Port P1 DCD IntDefaultHandler ; GPIO Port P2 DCD IntDefaultHandler ; GPIO Port P3 DCD IntDefaultHandler ; GPIO Port P4 DCD IntDefaultHandler ; GPIO Port P5 DCD IntDefaultHandler ; GPIO Port P6 DCD IntDefaultHandler ; GPIO Port P7 DCD IntDefaultHandler ; GPIO Port Q (Summary or Q0) DCD IntDefaultHandler ; GPIO Port Q1 DCD IntDefaultHandler ; GPIO Port Q2 DCD IntDefaultHandler ; GPIO Port Q3 DCD IntDefaultHandler ; GPIO Port Q4 DCD IntDefaultHandler ; GPIO Port Q5 DCD IntDefaultHandler ; GPIO Port Q6 DCD IntDefaultHandler ; GPIO Port Q7 DCD IntDefaultHandler ; GPIO Port R DCD IntDefaultHandler ; GPIO Port S DCD IntDefaultHandler ; PWM 1 Generator 0 DCD IntDefaultHandler ; PWM 1 Generator 1 DCD IntDefaultHandler ; PWM 1 Generator 2 DCD IntDefaultHandler ; PWM 1 Generator 3 DCD IntDefaultHandler ; PWM 1 Fault ;****************************************************************************** ; ; This is the code that gets called when the processor first starts execution ; following a reset event. ; ;****************************************************************************** EXPORT Reset_Handler Reset_Handler ; ; Call the C library enty point that handles startup. This will copy ; the .data section initializers from flash to SRAM and zero fill the ; .bss section. ; IMPORT __main B __main ;****************************************************************************** ; ; This is the code that gets called when the processor receives a NMI. This ; simply enters an infinite loop, preserving the system state for examination ; by a debugger. ; ;****************************************************************************** NmiSR B NmiSR ;****************************************************************************** ; ; This is the code that gets called when the processor receives a fault ; interrupt. This simply enters an infinite loop, preserving the system state ; for examination by a debugger. ; ;****************************************************************************** FaultISR B FaultISR ;****************************************************************************** ; ; This is the code that gets called when the processor receives an unexpected ; interrupt. This simply enters an infinite loop, preserving the system state ; for examination by a debugger. ; ;****************************************************************************** IntDefaultHandler B IntDefaultHandler ;****************************************************************************** ; ; Make sure the end of this section is aligned. ; ;****************************************************************************** ALIGN ;****************************************************************************** ; ; Some code in the normal code section for initializing the heap and stack. ; ;****************************************************************************** AREA |.text|, CODE, READONLY ;****************************************************************************** ; ; The function expected of the C library startup code for defining the stack ; and heap memory locations. For the C library version of the startup code, ; provide this function so that the C library initialization code can find out ; the location of the stack and heap. ; ;****************************************************************************** IF :DEF: __MICROLIB EXPORT __initial_sp EXPORT __heap_base EXPORT __heap_limit ELSE IMPORT __use_two_region_memory EXPORT __user_initial_stackheap __user_initial_stackheap LDR R0, =HeapMem LDR R1, =(StackMem + Stack) LDR R2, =(HeapMem + Heap) LDR R3, =StackMem BX LR ENDIF ;****************************************************************************** ; ; Make sure the end of this section is aligned. ; ;****************************************************************************** ALIGN ;****************************************************************************** ; ; Tell the assembler that we're done. ; ;****************************************************************************** END