//***************************************************************************** // // am_hal_otp.h //! @file //! //! @brief Functions for handling the OTP interface. // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2017, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 1.2.9 of the AmbiqSuite Development Package. // //***************************************************************************** #ifndef AM_HAL_OTP_H #define AM_HAL_OTP_H #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // Define some OTP values and macros. // //***************************************************************************** #define AM_HAL_OTP_SIG0 0x00 #define AM_HAL_OTP_SIG1 0x04 #define AM_HAL_OTP_SIG2 0x08 #define AM_HAL_OTP_SIG3 0x0C #define AM_HAL_OTP_DBGR_O 0x10 #define AM_HAL_OTP_WRITPROT0_O 0x20 #define AM_HAL_OTP_WRITPROT1_O 0x24 #define AM_HAL_OTP_COPYPROT0_O 0x30 #define AM_HAL_OTP_COPYPROT1_O 0x34 #define AM_HAL_OTP_ADDR 0x50020000 #define AM_HAL_OTP_DBGRPROT_ADDR (AM_HAL_OTP_ADDR + AM_HAL_OTP_DBGR_O) #define AM_HAL_OTP_WRITPROT_ADDR (AM_HAL_OTP_ADDR + AM_HAL_OTP_WRITPROT0_O) #define AM_HAL_OTP_COPYPROT_ADDR (AM_HAL_OTP_ADDR + AM_HAL_OTP_COPYPROT0_O) #define AM_HAL_OTP_CHUNKSIZE (16*1024) // // Debugger port lockout macros. // #define AM_OTP_DBGR_LOCKOUT_S (0) #define AM_OTP_DBGR_LOCKOUT_M (0x1 << AM_OTP_DBGR_LOCKOUT_S) #define AM_OTP_STRM_LOCKOUT_S (1) #define AM_OTP_STRM_LOCKOUT_M (0x1 << AM_OTP_STRM_LOCKOUT_S) #define AM_OTP_SRAM_LOCKOUT_S (2) #define AM_OTP_SRAM_LOCKOUT_M (0x1 << AM_OTP_SRAM_LOCKOUT_S) //***************************************************************************** // // Function prototypes // //***************************************************************************** extern int am_hal_otp_is_debugger_lockedout(void); extern int am_hal_otp_debugger_lockout(void); extern int am_hal_otp_sram_lockout(void); extern int am_hal_otp_set_copy_protection(uint32_t u32BegAddr, uint32_t u32EndAddr); extern int am_hal_otp_set_write_protection(uint32_t u32BegAddr, uint32_t u32EndAddr); #ifdef __cplusplus } #endif #endif // AM_HAL_OTP_H //***************************************************************************** // // End Doxygen group. //! @} // //*****************************************************************************