/**
  ******************************************************************************
  * @file           : main.h
  * @brief          : Header for main.c file.
  *                   This file contains the common defines of the application.
  ******************************************************************************
  ** This notice applies to any and all portions of this file
  * that are not between comment pairs USER CODE BEGIN and
  * USER CODE END. Other portions of this file, whether 
  * inserted by the user or by software development tools
  * are owned by their respective copyright owners.
  *
  * COPYRIGHT(c) 2018 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H__
#define __MAIN_H__

/* Includes ------------------------------------------------------------------*/

/* USER CODE BEGIN Includes */
//#include "stm32f0xx_hal.h"
#include <rtthread.h>
/* USER CODE END Includes */

/* Private define ------------------------------------------------------------*/

#define USART2_TX_Pin GPIO_PIN_2
#define USART2_TX_GPIO_Port GPIOA
#define USART2_RX_Pin GPIO_PIN_3
#define USART2_RX_GPIO_Port GPIOA
#define LD2_Pin GPIO_PIN_5
#define LD2_GPIO_Port GPIOA
#define USART1_TX_Pin GPIO_PIN_9
#define USART1_TX_GPIO_Port GPIOA
#define USART1_RX_Pin GPIO_PIN_10
#define USART1_RX_GPIO_Port GPIOA
#define USART1_DE_Pin GPIO_PIN_12
#define USART1_DE_GPIO_Port GPIOA
#define TMS_Pin GPIO_PIN_13
#define TMS_GPIO_Port GPIOA
#define TCK_Pin GPIO_PIN_14
#define TCK_GPIO_Port GPIOA

/* ########################## Assert Selection ############################## */
/**
  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
  *        HAL drivers code
  */
/* #define USE_FULL_ASSERT    1U */

/* USER CODE BEGIN Private defines */

#ifdef __cplusplus
extern "C" {
#endif
/* board configuration */

#define STM32F0XX_PIN_NUMBERS 64

#define STM32_SRAM_SIZE 8

/* whether use board external SRAM memory */
// <e>Use external SRAM memory on the board
// 	<i>Enable External SRAM memory
#define STM32_EXT_SRAM 0
//	<o>Begin Address of External SRAM
//		<i>Default: 0x68000000
#define STM32_EXT_SRAM_BEGIN \
    0x68000000 /* the begining address of external SRAM */
//	<o>End Address of External SRAM
//		<i>Default: 0x68080000
#define STM32_EXT_SRAM_END 0x68080000 /* the end address of external SRAM */
// </e>
// <o> Internal SRAM memory size[Kbytes] <8-64>
//	<i>Default: 64
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
#define HEAP_BEGIN ((void*)&Image$$RW_IRAM1$$ZI$$Limit)
#elif __ICCARM__
#pragma section = "HEAP"
#define HEAP_BEGIN (__segment_end("HEAP"))
#else
extern int __bss_end;
#define HEAP_BEGIN ((void*)&__bss_end)
#endif
#define HEAP_END STM32_SRAM_END

void rt_hw_board_init(void);
void rt_hw_us_delay(rt_uint32_t us);

#ifdef __cplusplus
}
#endif

/* USER CODE END Private defines */

#ifdef __cplusplus
 extern "C" {
#endif
void _Error_Handler(char *, int);

#define Error_Handler() _Error_Handler(__FILE__, __LINE__)
#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H__ */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/