//***************************************************************************** // // hw_ssi.h - Macros used when accessing the SSI hardware. // // Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 8049 of the Stellaris Firmware Development Package. // //***************************************************************************** #ifndef __HW_SSI_H__ #define __HW_SSI_H__ //***************************************************************************** // // The following are defines for the SSI register offsets. // //***************************************************************************** #define SSI_O_CR0 0x00000000 // SSI Control 0 #define SSI_O_CR1 0x00000004 // SSI Control 1 #define SSI_O_DR 0x00000008 // SSI Data #define SSI_O_SR 0x0000000C // SSI Status #define SSI_O_CPSR 0x00000010 // SSI Clock Prescale #define SSI_O_IM 0x00000014 // SSI Interrupt Mask #define SSI_O_RIS 0x00000018 // SSI Raw Interrupt Status #define SSI_O_MIS 0x0000001C // SSI Masked Interrupt Status #define SSI_O_ICR 0x00000020 // SSI Interrupt Clear #define SSI_O_DMACTL 0x00000024 // SSI DMA Control #define SSI_O_CC 0x00000FC8 // SSI Clock Configuration //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_CR0 register. // //***************************************************************************** #define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate #define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase #define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity #define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select #define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format #define SSI_CR0_FRF_TI 0x00000010 // Texas Instruments Synchronous // Serial Frame Format #define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format #define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select #define SSI_CR0_DSS_4 0x00000003 // 4-bit data #define SSI_CR0_DSS_5 0x00000004 // 5-bit data #define SSI_CR0_DSS_6 0x00000005 // 6-bit data #define SSI_CR0_DSS_7 0x00000006 // 7-bit data #define SSI_CR0_DSS_8 0x00000007 // 8-bit data #define SSI_CR0_DSS_9 0x00000008 // 9-bit data #define SSI_CR0_DSS_10 0x00000009 // 10-bit data #define SSI_CR0_DSS_11 0x0000000A // 11-bit data #define SSI_CR0_DSS_12 0x0000000B // 12-bit data #define SSI_CR0_DSS_13 0x0000000C // 13-bit data #define SSI_CR0_DSS_14 0x0000000D // 14-bit data #define SSI_CR0_DSS_15 0x0000000E // 15-bit data #define SSI_CR0_DSS_16 0x0000000F // 16-bit data #define SSI_CR0_SCR_S 8 //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_CR1 register. // //***************************************************************************** #define SSI_CR1_EOT 0x00000010 // End of Transmission #define SSI_CR1_SOD 0x00000008 // SSI Slave Mode Output Disable #define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select #define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port // Enable #define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_DR register. // //***************************************************************************** #define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data #define SSI_DR_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_SR register. // //***************************************************************************** #define SSI_SR_BSY 0x00000010 // SSI Busy Bit #define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full #define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty #define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full #define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_CPSR register. // //***************************************************************************** #define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor #define SSI_CPSR_CPSDVSR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_IM register. // //***************************************************************************** #define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask #define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask #define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt // Mask #define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt // Mask //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_RIS register. // //***************************************************************************** #define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt // Status #define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt // Status #define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw // Interrupt Status #define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw // Interrupt Status //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_MIS register. // //***************************************************************************** #define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked // Interrupt Status #define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked // Interrupt Status #define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked // Interrupt Status #define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked // Interrupt Status //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_ICR register. // //***************************************************************************** #define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt // Clear #define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt // Clear //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_DMACTL register. // //***************************************************************************** #define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable #define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable //***************************************************************************** // // The following are defines for the bit fields in the SSI_O_CC register. // //***************************************************************************** #define SSI_CC_CS_M 0x0000000F // SSI Baud Clock Source #define SSI_CC_CS_SYSPLL 0x00000000 // Either the system clock (if the // PLL bypass is in effect) or the // PLL output (default) #define SSI_CC_CS_PIOSC 0x00000001 // PIOSC //***************************************************************************** // // The following definitions are deprecated. // //***************************************************************************** #ifndef DEPRECATED //***************************************************************************** // // The following are deprecated defines for the bit fields in the SSI_O_CR0 // register. // //***************************************************************************** #define SSI_CR0_SCR 0x0000FF00 // Serial clock rate #define SSI_CR0_FRF_MASK 0x00000030 // Frame format mask #define SSI_CR0_DSS 0x0000000F // Data size select //***************************************************************************** // // The following are deprecated defines for the bit fields in the SSI_O_CPSR // register. // //***************************************************************************** #define SSI_CPSR_CPSDVSR_MASK 0x000000FF // Clock prescale //***************************************************************************** // // The following are deprecated defines for the SSI controller's FIFO size. // //***************************************************************************** #define TX_FIFO_SIZE (8) // Number of entries in the TX FIFO #define RX_FIFO_SIZE (8) // Number of entries in the RX FIFO //***************************************************************************** // // The following are deprecated defines for the bit fields in the interrupt // mask set and clear, raw interrupt, masked interrupt, and interrupt clear // registers. // //***************************************************************************** #define SSI_INT_TXFF 0x00000008 // TX FIFO interrupt #define SSI_INT_RXFF 0x00000004 // RX FIFO interrupt #define SSI_INT_RXTO 0x00000002 // RX timeout interrupt #define SSI_INT_RXOR 0x00000001 // RX overrun interrupt #endif #endif // __HW_SSI_H__