//***************************************************************************** // // ssi.h - Prototypes for the Synchronous Serial Interface Driver. // // Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 8049 of the Stellaris Peripheral Driver Library. // //***************************************************************************** #ifndef __SSI_H__ #define __SSI_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // Values that can be passed to SSIIntEnable, SSIIntDisable, and SSIIntClear // as the ulIntFlags parameter, and returned by SSIIntStatus. // //***************************************************************************** #define SSI_TXFF 0x00000008 // TX FIFO half full or less #define SSI_RXFF 0x00000004 // RX FIFO half full or more #define SSI_RXTO 0x00000002 // RX timeout #define SSI_RXOR 0x00000001 // RX overrun //***************************************************************************** // // Values that can be passed to SSIConfigSetExpClk. // //***************************************************************************** #define SSI_FRF_MOTO_MODE_0 0x00000000 // Moto fmt, polarity 0, phase 0 #define SSI_FRF_MOTO_MODE_1 0x00000002 // Moto fmt, polarity 0, phase 1 #define SSI_FRF_MOTO_MODE_2 0x00000001 // Moto fmt, polarity 1, phase 0 #define SSI_FRF_MOTO_MODE_3 0x00000003 // Moto fmt, polarity 1, phase 1 #define SSI_FRF_TI 0x00000010 // TI frame format #define SSI_FRF_NMW 0x00000020 // National MicroWire frame format #define SSI_MODE_MASTER 0x00000000 // SSI master #define SSI_MODE_SLAVE 0x00000001 // SSI slave #define SSI_MODE_SLAVE_OD 0x00000002 // SSI slave with output disabled //***************************************************************************** // // Values that can be passed to SSIDMAEnable() and SSIDMADisable(). // //***************************************************************************** #define SSI_DMA_TX 0x00000002 // Enable DMA for transmit #define SSI_DMA_RX 0x00000001 // Enable DMA for receive //***************************************************************************** // // Values that can be passed to SSIClockSourceSet() or returned from // SSIClockSourceGet(). // //***************************************************************************** #define SSI_CLOCK_SYSTEM 0x00000000 #define SSI_CLOCK_PIOSC 0x00000001 //***************************************************************************** // // Prototypes for the APIs. // //***************************************************************************** extern void SSIConfigSetExpClk(unsigned long ulBase, unsigned long ulSSIClk, unsigned long ulProtocol, unsigned long ulMode, unsigned long ulBitRate, unsigned long ulDataWidth); extern void SSIDataGet(unsigned long ulBase, unsigned long *pulData); extern long SSIDataGetNonBlocking(unsigned long ulBase, unsigned long *pulData); extern void SSIDataPut(unsigned long ulBase, unsigned long ulData); extern long SSIDataPutNonBlocking(unsigned long ulBase, unsigned long ulData); extern void SSIDisable(unsigned long ulBase); extern void SSIEnable(unsigned long ulBase); extern void SSIIntClear(unsigned long ulBase, unsigned long ulIntFlags); extern void SSIIntDisable(unsigned long ulBase, unsigned long ulIntFlags); extern void SSIIntEnable(unsigned long ulBase, unsigned long ulIntFlags); extern void SSIIntRegister(unsigned long ulBase, void(*pfnHandler)(void)); extern unsigned long SSIIntStatus(unsigned long ulBase, tBoolean bMasked); extern void SSIIntUnregister(unsigned long ulBase); extern void SSIDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags); extern void SSIDMADisable(unsigned long ulBase, unsigned long ulDMAFlags); extern tBoolean SSIBusy(unsigned long ulBase); extern void SSIClockSourceSet(unsigned long ulBase, unsigned long ulSource); extern unsigned long SSIClockSourceGet(unsigned long ulBase); //***************************************************************************** // // Several SSI APIs have been renamed, with the original function name being // deprecated. These defines provide backward compatibility. // //***************************************************************************** #ifndef DEPRECATED #include "driverlib/sysctl.h" #define SSIConfig(a, b, c, d, e) \ SSIConfigSetExpClk(a, SysCtlClockGet(), b, c, d, e) #define SSIDataNonBlockingGet(a, b) \ SSIDataGetNonBlocking(a, b) #define SSIDataNonBlockingPut(a, b) \ SSIDataPutNonBlocking(a, b) #endif //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __SSI_H__