/*
 * File      : sdio.h
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2006, RT-Thread Development Team
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rt-thread.org/license/LICENSE
 *
 * Change Logs:
 * Date           Author		Notes
 * 2012-01-15     weety		first version
 */


#ifndef __SDIO_H__
#define __SDIO_H__


#include <rtthread.h>
#include "mmcsd_host.h"
#include "mmcsd_card.h"
#include "sdio_func_ids.h"

#ifdef __cplusplus
extern "C" {
#endif

struct rt_sdio_function;

typedef void (rt_sdio_irq_handler_t)(struct rt_sdio_function *);

/*
 * SDIO function CIS tuple (unknown to the core)
 */
struct rt_sdio_function_tuple {
	struct rt_sdio_function_tuple *next;
	rt_uint8_t code;
	rt_uint8_t size;
	rt_uint8_t *data;
};

/*
 * SDIO function devices
 */
struct rt_sdio_function {
	struct rt_mmcsd_card		*card;		/* the card this device belongs to */
	rt_sdio_irq_handler_t	*irq_handler;	/* IRQ callback */
	rt_uint8_t		num;		/* function number */

	rt_uint8_t		func_code;   /*  Standard SDIO Function interface code  */
	rt_uint16_t		manufacturer;		/* manufacturer id */
	rt_uint16_t		product;		/* product id */

	rt_uint32_t		max_blk_size;	/* maximum block size */
	rt_uint32_t		cur_blk_size;	/* current block size */

	rt_uint32_t		enable_timeout_val; /* max enable timeout in msec */

	struct rt_sdio_function_tuple *tuples;
};

/*
 * Card Common Control Registers (CCCR)
 */

#define SDIO_REG_CCCR_CCCR_REV		0x00

#define  SDIO_CCCR_REV_1_00	0	/* CCCR/FBR Version 1.00 */
#define  SDIO_CCCR_REV_1_10	1	/* CCCR/FBR Version 1.10 */
#define  SDIO_CCCR_REV_1_20	2	/* CCCR/FBR Version 1.20 */

#define  SDIO_SDIO_REV_1_00	0	/* SDIO Spec Version 1.00 */
#define  SDIO_SDIO_REV_1_10	1	/* SDIO Spec Version 1.10 */
#define  SDIO_SDIO_REV_1_20	2	/* SDIO Spec Version 1.20 */
#define  SDIO_SDIO_REV_2_00	3	/* SDIO Spec Version 2.00 */

#define SDIO_REG_CCCR_SD_REV		0x01

#define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
#define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
#define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */

#define SDIO_REG_CCCR_IO_EN		0x02
#define SDIO_REG_CCCR_IO_RDY		0x03

#define SDIO_REG_CCCR_INT_EN		0x04	/* Function/Master Interrupt Enable */
#define SDIO_REG_CCCR_INT_PEND		0x05	/* Function Interrupt Pending */

#define SDIO_REG_CCCR_IO_ABORT		0x06	/* function abort/card reset */

#define SDIO_REG_CCCR_BUS_IF		0x07	/* bus interface controls */

#define  SDIO_BUS_WIDTH_1BIT	0x00
#define  SDIO_BUS_WIDTH_4BIT	0x02
#define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
#define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */

#define  SDIO_BUS_ASYNC_INT	0x20

#define  SDIO_BUS_CD_DISABLE     0x80	/* disable pull-up on DAT3 (pin 1) */

#define SDIO_REG_CCCR_CARD_CAPS		0x08

#define  SDIO_CCCR_CAP_SDC	0x01	/* can do CMD52 while data transfer */
#define  SDIO_CCCR_CAP_SMB	0x02	/* can do multi-block xfers (CMD53) */
#define  SDIO_CCCR_CAP_SRW	0x04	/* supports read-wait protocol */
#define  SDIO_CCCR_CAP_SBS	0x08	/* supports suspend/resume */
#define  SDIO_CCCR_CAP_S4MI	0x10	/* interrupt during 4-bit CMD53 */
#define  SDIO_CCCR_CAP_E4MI	0x20	/* enable ints during 4-bit CMD53 */
#define  SDIO_CCCR_CAP_LSC	0x40	/* low speed card */
#define  SDIO_CCCR_CAP_4BLS	0x80	/* 4 bit low speed card */

#define SDIO_REG_CCCR_CIS_PTR		0x09	/* common CIS pointer (3 bytes) */

/* Following 4 regs are valid only if SBS is set */
#define SDIO_REG_CCCR_BUS_SUSPEND	0x0c
#define SDIO_REG_CCCR_FUNC_SEL		0x0d
#define SDIO_REG_CCCR_EXEC_FLAG		0x0e
#define SDIO_REG_CCCR_READY_FLAG	0x0f

#define SDIO_REG_CCCR_FN0_BLKSIZE	0x10 /* 2bytes, 0x10~0x11 */

#define SDIO_REG_CCCR_POWER_CTRL		0x12

#define  SDIO_POWER_SMPC	0x01	/* Supports Master Power Control */
#define  SDIO_POWER_EMPC	0x02	/* Enable Master Power Control */

#define SDIO_REG_CCCR_SPEED		0x13

#define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
#define  SDIO_SPEED_EHS		0x02	/* Enable High-Speed mode */

/*
 * Function Basic Registers (FBR)
 */

#define SDIO_REG_FBR_BASE(f)	((f) * 0x100) /* base of function f's FBRs */

#define SDIO_REG_FBR_STD_FUNC_IF		0x00

#define  SDIO_FBR_SUPPORTS_CSA	0x40	/* supports Code Storage Area */
#define  SDIO_FBR_ENABLE_CSA	0x80	/* enable Code Storage Area */

#define SDIO_REG_FBR_STD_IF_EXT	0x01

#define SDIO_REG_FBR_POWER		0x02

#define  SDIO_FBR_POWER_SPS	0x01	/* Supports Power Selection */
#define  SDIO_FBR_POWER_EPS	0x02	/* Enable (low) Power Selection */

#define SDIO_REG_FBR_CIS		0x09	/* CIS pointer (3 bytes) */


#define SDIO_REG_FBR_CSA		0x0C	/* CSA pointer (3 bytes) */

#define SDIO_REG_FBR_CSA_DATA	0x0F

#define SDIO_REG_FBR_BLKSIZE	0x10	/* block size (2 bytes) */


/* SDIO CIS Tuple code */
#define CISTPL_NULL      0x00
#define CISTPL_CHECKSUM  0x10
#define CISTPL_VERS_1    0x15
#define CISTPL_ALTSTR    0x16
#define CISTPL_MANFID    0x20
#define CISTPL_FUNCID    0x21
#define CISTPL_FUNCE     0x22
#define CISTPL_SDIO_STD  0x91
#define CISTPL_SDIO_EXT  0x92
#define CISTPL_END       0xff

/* SDIO device id */
#define SDIO_ANY_FUNC_ID    0xff
#define SDIO_ANY_MAN_ID     0xffff
#define SDIO_ANY_PROD_ID    0xffff

struct rt_sdio_device_id {
	rt_uint8_t   func_code;
	rt_uint16_t  manufacturer;
	rt_uint16_t  product;
};

struct rt_sdio_driver {
	char *name;
	rt_int32_t (*probe)(struct rt_sdio_function *func);
	rt_int32_t (*remove)(struct rt_sdio_function *func);
	struct rt_sdio_device_id *id;
};



rt_int32_t sdio_io_send_op_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr, rt_uint32_t 
*cmd5_resp);
rt_int32_t sdio_io_rw_direct(struct rt_mmcsd_card *card, rt_int32_t rw, rt_uint32_t fn,
	rt_uint32_t reg_addr, rt_uint8_t *pdata, rt_uint8_t raw);
rt_int32_t sdio_io_rw_extended(struct rt_mmcsd_card *card, rt_int32_t rw, rt_uint32_t fn,
	rt_uint32_t addr, rt_int32_t op_code, rt_uint8_t *buf, rt_uint32_t blocks, rt_uint32_t blksize);
rt_uint8_t sdio_io_readb(struct rt_sdio_function *func, 
			 rt_uint32_t reg, rt_int32_t *err);
rt_int32_t sdio_io_writeb(struct rt_sdio_function *func, 
			  rt_uint32_t reg, rt_uint8_t data);
rt_uint16_t sdio_io_readw(struct rt_sdio_function *func, rt_uint32_t addr, rt_int32_t *err);
rt_int32_t sdio_io_writew(struct rt_sdio_function *func, rt_uint16_t data, rt_uint32_t addr);
rt_uint32_t sdio_io_readl(struct rt_sdio_function *func, rt_uint32_t addr, rt_int32_t *err);
rt_int32_t sdio_io_writel(struct rt_sdio_function *func, rt_uint32_t data, rt_uint32_t addr);
rt_int32_t sdio_io_read_multi_fifo_b(struct rt_sdio_function *func, 
				     rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_write_multi_fifo_b(struct rt_sdio_function *func, 
				      rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_read_multi_incr_b(struct rt_sdio_function *func, 
				     rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_write_multi_incr_b(struct rt_sdio_function *func, 
				      rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t init_sdio(struct rt_mmcsd_host *host, rt_uint32_t ocr);
rt_int32_t sdio_attach_irq(struct rt_sdio_function *func, rt_sdio_irq_handler_t *handler);
rt_int32_t sdio_detach_irq(struct rt_sdio_function *func);
void sdio_irq_wakeup(struct rt_mmcsd_host *host);
rt_int32_t sdio_enable_func(struct rt_sdio_function *func);
rt_int32_t sdio_disable_func(struct rt_sdio_function *func);
rt_int32_t sdio_set_block_size(struct rt_sdio_function *func, rt_uint32_t blksize);
rt_int32_t sdio_register_driver(struct rt_sdio_driver *driver);
rt_int32_t sdio_unregister_driver(struct rt_sdio_driver *driver);
void rt_sdio_init(void);


#ifdef __cplusplus
}
#endif

#endif