e38f3aa39c
[BSP] Update Keil MDK project files.
2015-05-11 21:10:25 +08:00
2be9959891
correct stm32f10x pin64 define error
2015-04-23 16:11:38 +08:00
93122aaa19
[BSP]stm32f10x: Fix gpio driver for 144pins and 64pins
2015-03-25 10:44:02 +08:00
c377690989
[BSP]stm32f10x: Add gpio driver for pin driver frame
2015-03-24 16:30:37 +08:00
351dd923e3
bsp stm32f10x add uart4 drive
2015-03-11 15:24:09 +08:00
a61d228b76
Nanopb is a plain-C implementation of Google's Protocol Buffers data
...
format. It is targeted at 32 bit microcontrollers, but is also fit for
other embedded systems with tight (2-10 kB ROM, <1 kB RAM) memory
constraints.(http://koti.kapsi.fi/jpa/nanopb/ )
How to use the example:
1. move examples/nanopb to bsp/xxxx/
2. enable macro RT_USING_NANOPB in rtconfig.h
3. regenerate the project file (scons --target=xxxx)
4. rebuild the project
2015-03-10 18:24:17 +08:00
79c37cb30f
[BSP]changed stm32f10x uart driver. make sure the serial transmit
...
complete in putc().
2015-01-31 11:18:59 +08:00
131c41d182
[BSP]support 9 data bits and parity config for stm32f10x uart driver.
2015-01-31 11:14:10 +08:00
1213dec3c9
fix #347
2015-01-31 11:05:00 +08:00
3c65a522fd
Add mdk5 project for stm32 bsps
2014-11-19 15:28:56 +08:00
77b214f1bc
[BSP]Add serial receive overflow interrupt to stm32f10x ISR.
2014-09-13 11:53:21 +08:00
04c4e5d9a4
[BSP]Fixes two writing mistake for stm32f10x.
2014-09-13 11:50:54 +08:00
537beefa70
拼写错误
...
drvers->drivers
2014-09-08 19:53:55 +08:00
9572d3e46a
[bsp] Fix STM32F10x compiling warning.
2014-07-21 06:23:50 +08:00
26118499e0
[BSP] remove rt_device_init_all() invoking.
2014-07-19 06:50:00 +08:00
74377b2650
[Drivers] re-write serial framework.
2014-07-18 07:21:09 +08:00
2a9e893c79
initialize timer in bsp
...
With new timer algorithm, timer should be initialized during startup. So
add them to the bsps. Use these commands to get which bsp is missing
calling the function:
% git grep rt_system_timer_init bsp|sed -n 's|bsp/\([^/]*\).*|\1|p' | sort | uniq > have_tm_init
% ls -1 bsp |sed -n 's|\([^/]*\).*|\1|p' | sort > all_bsp
% comm -3 all_bsp have_tm_init
beaglebone
lpc176x
lpc178x
ls1bdev
mb9bf506r
stm32f10x
xplorer4330
2013-10-21 00:31:10 +08:00
d70761222c
stm32f10x: fix the rtgui initialization
...
The rtgui_system_server_init prototype is wrong. And if we use
RT_USING_COMPONENTS_INIT, there is no need to call
rtgui_system_server_init again.
2013-09-03 20:09:45 +08:00
13c30f9269
update usart driver: use serial driver component.
2013-07-12 23:32:48 +08:00
b12f6bbdee
cleanup code.
2013-07-12 23:28:24 +08:00
fc9d7926e2
update project support auto initial.
2013-07-12 23:09:12 +08:00
c44b02f08c
support auto initial.
2013-07-12 23:08:46 +08:00
8890e83aa9
update DM9000 ethernet driver for auto initial.
2013-07-12 22:54:53 +08:00
020d05ca92
update SD card driver for auto initial.
2013-07-12 22:54:48 +08:00
5183697fd4
update linker script for components auto initial.
2013-07-12 22:50:50 +08:00
e749fb6e9a
cleanup code.
2013-07-12 18:38:30 +08:00
a183f1fbe9
update stm32f10x project.
2013-07-12 18:31:42 +08:00
8c2a11c234
update stm32f10x project directory structure.
2013-07-12 18:16:43 +08:00
f0d03af696
remove unused file.
2013-07-12 17:51:35 +08:00
8711a0c986
update SConstruct.
2013-07-11 23:11:16 +08:00
cc8301d0f1
update linker script for components auto initial.
2013-07-11 23:07:16 +08:00
4807145a71
clean up code: remove the old file.
2013-06-08 20:50:09 +08:00
24649bfefe
bsp/stm32f10x: remove the last calibration.c
...
This also provide an example to show how to use calibration feature in
the RTGUI.
2013-02-24 18:16:16 +08:00
eefb272cfd
update stm32f10x template.
2013-02-20 10:49:09 +08:00
e3a4ae1370
update stm32f10x template.
2013-02-20 10:15:09 +08:00
b4de7cce57
Re-normalizing the repo
2013-01-08 22:40:58 +08:00
d48ef70ecd
In stm32fx's stm32_rom.ld, add symbol - '_stext' to support lua a. Update lua's README.TXT
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2410 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-11-13 15:21:01 +00:00
f36a8ca713
using the default path of Keil(C:\Keil) as the keil EXEC_PATH
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2297 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-09-20 07:22:11 +00:00
70e39ffa54
update rtgui related project
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2177 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-06-19 00:48:11 +00:00
efeb6231be
define RT_USING_RTT_CMSIS in rtconfig.h while using IAR 6.30+
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2170 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-06-18 03:00:01 +00:00
0f6856b538
update the keil projects with tools/buildbot.py project
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2055 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-04-14 12:00:17 +00:00
cfc501f919
fixed IAR compiling error
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2053 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-04-14 11:29:42 +00:00
a7810e12b9
update the rtconfig.py and SConstruct in the BSP
...
in order to use buildbot.py
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2028 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-04-09 03:32:35 +00:00
645260a1c9
fixed a compiling error while not defined RT_USING_FINSH
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1906 bbd45198-f89e-11dd-88c7-29a3b14d5316
2012-01-03 09:08:47 +00:00
072fa60bdc
update stm32f10x rtconfig.py.
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1892 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-12-31 04:13:36 +00:00
8b64d24bd4
all STM32 cortex-m3 branches using /libcpu/arm/cortex-m3 instead of /libcpu/arm/stm32
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1858 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-12-21 09:44:52 +00:00
fe3b233de4
set DMA_Configuration.DMA_BufferSize to 1
...
DMA_Init asserts DMA_BufferSize >=1.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1822 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-12-01 10:00:20 +00:00
48d4e00ee8
clear DMA1_FLAG_TC2 in usart3 initialization
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1821 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-12-01 09:50:58 +00:00
bff77ee86b
update rtc driver.
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1811 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-28 05:58:21 +00:00
88f891066d
update rtc driver.
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1808 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-26 09:52:52 +00:00
3efb7d5cda
remove the unused key.c and rt_hw_key_init
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1794 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-17 11:28:27 +00:00
22a9d6f309
revert commit 1791
...
That commit broke bsp/stm3210x. The cause is that we calls rtgui_system_init in rtgui_startup. But the calibration starts before rtgui_startup and rtgui_system_init. This lead to crash.
One way to deal with it is move rtgui_system_init out of rtgui_startup and call it manually. But it will affect other bsps. So just revert the "bad" commit.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1793 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-16 03:12:04 +00:00
4e8d6639f0
bsp/stm32f10x: calibrate touch screen before starting GUI
...
If we do not calibrate the touch screen, GUI is unusable. This patch use a semaphore to block GUI thread until calibration finish.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1791 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-08 09:33:18 +00:00
065c3fb834
fix typo in last commit...
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1790 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-08 09:19:41 +00:00
93104fb4fc
bsp/stm32f10x/touch: return early when lost the position
...
Check whether finger is still on the screen. If not, we couldn't determine where the user has touched. It's better to return early rather than give garbage values.
A more sensitive solution might be caculate the position once the interrupt occured. But it's not anti-shake friendly.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1789 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-08 07:52:20 +00:00
44b91706e2
bsp/stm32f10x/touch.c: better naming
...
Rename flag to touched_down.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1788 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-08 07:41:42 +00:00
f344f00278
bsp/stm32f10x/touch.c: normalize the calibrated touch position
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1783 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-02 12:14:57 +00:00
e803640027
avoid divided by zero error
...
The old code only checks touch->max_x > touch->min_x but not touch->max_x == touch->min_x. Thus may lead to divided by zero error.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1782 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-02 08:58:34 +00:00
9de3512c8a
fix ads7843 data fetching
...
The old code forgot to drop the MSB in the very first byte retrieved from ads7843 after a control byte. This will lead to data corruption especially in 16-Clocks per conversion mode.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1781 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-02 08:17:40 +00:00
c17931ad60
update enc28j60 driver. thank jeames: http://www.ourdev.cn/bbs/bbs_content.jsp?bbs_sn=4974037
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1753 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-10-11 02:57:51 +00:00
85d57f4bee
update stm32f10x project
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1734 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-09-30 06:13:05 +00:00
fef0997a37
update stm32 uart driver
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1727 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-09-24 17:15:22 +00:00
3c0f80f2f7
update stm32 project and remove 107 eth driver from 10x
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1724 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-09-24 02:51:53 +00:00
958e18b520
add ili9325 lcd driver
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1612 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-04 08:18:58 +00:00
8109f9d59c
revert stm32_rom.sct
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1611 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-04 07:52:55 +00:00
b5f7c6cb44
update lcd driver
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1610 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-04 07:39:49 +00:00
bf7943c94b
stm32f10x branch support scons+iar compile
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1600 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-04 05:50:17 +00:00
dd2a4924ae
rename _system_tack_size to _system_stack_size
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1586 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-03 13:28:27 +00:00
a2470120e4
update stm32f10x gcc ld script
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1585 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-03 13:21:32 +00:00
07b16c0664
update en28j60 driver
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1572 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-01 12:36:16 +00:00
b850320773
update en28j60 driver
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1571 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-07-01 12:20:50 +00:00
311e669569
fix GNU ld script issue.
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1556 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-06-30 13:29:04 +00:00
de1f2b6b84
update stm32f10x
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1534 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-06-23 15:24:10 +00:00
a8f412bca6
update stm32f10x
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1517 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-06-15 15:21:44 +00:00
dc1079981b
update STM32F10x_StdPeriph_Lib_V3.5.0
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1511 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-06-15 02:16:25 +00:00
c283975160
move stm3210 to stm32f10x
...
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1509 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-06-15 02:14:23 +00:00
BernardXiong
Aubr.Cool
Bright Pan
unknown
armink
tcz717
Grissiom
aozima
Ming, Bai
xiongyihui3@gmail.com
dzzxzz@gmail.com