f2c31eebb5
[DeviceDrivers]Fix dataqueue's bug when push data is timeout the lwm flag isn't reset.
2016-10-19 10:49:42 +08:00
270285217d
[DeviceDrivers]Make sure rt_sfud_flash_probe device must be SPI device.
2016-10-14 22:51:18 +08:00
a4bc38ad6b
[DeviceDrivers]Update SFUD library to lastest version.
2016-10-14 22:48:36 +08:00
b2e14f7641
[DeviceDrivers]Modify SFUD's config for suitable more compilers.
2016-10-10 20:26:21 +08:00
32bf9e29b7
[DeviceDrivers]Change SFUD 'sf' command tips.
2016-10-10 20:10:41 +08:00
1d71f58350
[DeviceDrivers]Add SPI flash probe and delete function to SFUD driver.
2016-10-10 10:24:30 +08:00
16dad06fc7
[DeviceDrivers]Add SFUD(Serial Flash Universal Driver) SPI Flash driver for using RTT device. It makes RT-Thread support more type SPI Flash.
2016-10-09 09:06:01 +08:00
99481cd0ac
[DeviceDrivers] uart configure issue.
...
uart configure shall not been performed if uart is not open.
2016-06-13 13:31:13 +08:00
07c0e13060
Merge pull request #632 from armink/master
...
Improve serial DMA rx mode. #628
2016-05-20 14:26:23 +08:00
c5949c2736
[DeviceDrivers] Update SPI flash drivers.
2016-05-20 14:07:32 +08:00
ac3af54a7e
[DeviceDrivers] Use PBUF_POOL in enc28j60 drivers.
...
patched by FH.
2016-05-20 12:22:55 +08:00
f005d963e2
[DeviceDrivers] Add more baud rate in serial.
2016-05-20 12:22:16 +08:00
02a5cebc6d
[DeviceDrivers] Add MMC/SD change support.
...
Add MMC/SD change support, which patched by FH.
2016-05-20 12:20:35 +08:00
c3da9dda7b
[DeviceDrivers] Add fifo mode to serial DMA rx when serial->config.bufsz != 0.
2016-05-14 11:43:06 +08:00
4c9b77ded6
[DeviceDrivers]Fix dma_transmit callback parameter type error. #628
2016-05-11 13:34:18 +08:00
a3daa62151
[DeviceDrivers] Add RT_MTD_EECC_CORRECT code in MTD nand.
2016-04-18 13:56:38 +08:00
0d63eb5f6d
fix hardfault when RT_CAN_USING_BUS_HOOK is enabled in bsp/stm32f10x
...
function `rt_pin_write` is invoked by function `can_bus_hook`, and it should to be initialized by gpio.c.
but gpio.c was not added in SConscript
2016-04-14 23:47:32 +08:00
2b1983992f
Update serial.c
...
fix reset serial receive interrupt flag when close serial
2016-04-09 20:58:10 +08:00
048ffb481a
[DeviceDrivers] Add umount operations in SDCard block device.
2016-04-05 11:11:10 +08:00
8043186020
[DeviceDrivers] Add audio.h header file.
2016-04-05 11:10:08 +08:00
ada2c7a3f5
[DeviceDrivers] Add audio header file.
2016-04-05 11:02:04 +08:00
3748008651
[DeviceDrivers] Add card remove operations in MMC/SD.
2016-04-05 11:01:49 +08:00
24d089d80a
[DeviceDrivers] Remove the tail space
2016-03-01 10:57:25 +08:00
eefd87284c
[DeviceDrivers] fix the compiling warning in MMC/SD
2016-03-01 10:55:16 +08:00
9d46ae69a7
[DeviceDrivers] fix the poll_rx issue in serial when there is no data.
2015-11-10 10:24:35 +08:00
44ad3d1cb9
[DeviceDrivers] Remove open_flag assertion.
2015-09-24 20:46:59 +08:00
342e8d688d
Merge pull request #546 from heyuanjie87/ForPullRequest
...
[DeviceDrivers] Add hardware timer framework
2015-09-09 22:30:45 +08:00
984a7ba051
修改说明文档
2015-09-09 10:26:42 +08:00
f327e7c98f
Delete unused file.
2015-09-07 15:03:44 +08:00
efc1b058ac
添加说明文档
2015-09-07 13:27:05 +08:00
d19f424909
简化操作接口
2015-09-06 15:05:47 +08:00
ebea51e8a8
Add more spi mode.
2015-09-04 22:47:48 +08:00
b71cb4c09d
Add dm365 porting.
2015-09-04 12:30:20 +08:00
c84887d021
加入定时器设备
2015-09-02 22:00:24 +08:00
23b5fe5239
fix DMA tx mod tx_dma->activated flag init bug.
2015-08-31 14:57:01 +08:00
0690980fb6
Merge pull request #539 from SchumyHao/master
...
add w25q80 support to spi flash
2015-08-24 10:51:03 +08:00
e029f14b46
[DeviceDrivers] fix sd->drv issue in sdio
2015-08-09 11:23:16 +08:00
3ad3066c4b
fixed rt_can_close issues.
2015-07-21 17:04:22 +08:00
defa6f37ff
[DeviceDriver] update CAN baudrate enum.
2015-07-08 11:26:20 +08:00
7051f01f48
[DeviceDriver]can add bus_hook
2015-07-07 12:06:24 +08:00
5f860e8f94
[DeviceDriver]add missing hdr define
2015-07-07 12:01:56 +08:00
0f20bf12fd
[DeviceDriver]correct can critical problems
2015-07-07 11:50:39 +08:00
2ca3ceab70
[DeviceDrivers] code cleanup for CAN
2015-07-06 18:24:56 +08:00
91d866d81a
[DeviceDrivers] Use mutex to lock can_open/close
2015-07-06 18:11:46 +08:00
1488568801
[DeviceDrivers] code cleanup for CAN driver and fix some critical issue
2015-07-06 10:38:07 +08:00
9cbf30a767
correct can hdr defines
2015-07-04 00:25:05 +08:00
67b6b30e88
add rtthread.h include for can.h
2015-06-30 14:48:07 +08:00
b3f0737a99
correct can compiler error and warnings
2015-06-30 14:12:30 +08:00
28f2fbd4cc
1.Fixed sdmmc cmd retries issue;
2015-06-22 21:28:42 +08:00
41597e8793
Add mmc and emmc drivers.
2015-06-20 23:23:32 +08:00
c3e4fd079c
correct can hdr read error
2015-06-16 08:49:25 +08:00
9ea3219ab7
Add can driver doc
2015-05-15 11:34:43 +08:00
c7d703158a
Add SConscript for can
2015-05-15 08:00:14 +08:00
8e29e3d98b
add author information
2015-05-15 07:58:21 +08:00
eb56b832ef
Add Can Drv
2015-05-14 16:52:48 +08:00
2f5c5b676d
[DeviceDrivers] Add GD25Q flash id in w25qxx.c
2015-05-13 21:28:02 +08:00
77b5098ae2
[DeviceDriver] Add more exported symbols for completion.
2015-05-11 12:33:15 +08:00
452432a15b
[Sensor] Fix the call back issue in sensor.
2015-05-04 20:44:47 +08:00
6459839f28
Add extern declaration for C++.
2015-04-24 11:48:25 +08:00
88936f0836
format
2015-04-16 21:08:07 +08:00
7d341d4e6e
add w25q80 support to spi flash
2015-04-16 21:06:54 +08:00
16bf2e7255
[DeviceDriver] Fix inverted logic on SConscript
...
Remove dataqueue/pipe if not enable RT_USING_HEAP, supply the missing `not`.
2015-04-04 02:17:26 +08:00
40db28cfec
[DeviceDriver] Remove dataqueue/pipe if not enable RT_USING_HEAP
2015-03-31 06:17:49 +00:00
5d6ac1ed37
correct rx_fifo init size error
2015-03-26 13:26:13 +08:00
7caabd2b7a
mv device ctl cmd macros from serial.h to rtdef.h
2015-03-26 08:40:36 +08:00
29fd52dfb8
Update completion.c
...
fix: completion wait after, maybe can't clean the flag.
2015-03-24 15:54:08 +08:00
827ff71933
Merge pull request #435 from AubrCool/fix-pinregisternameproblems
...
[BSP] Correct pin register name problems
2015-03-23 20:55:34 +08:00
6dc5851c55
Correct pin register name problems
2015-03-23 09:38:09 +08:00
767c16d596
[USBH] fix the spelling wrong
2015-03-19 08:52:28 +00:00
3462537bdd
[DeviceDrivers] Update SConcript file for sensor code
2015-02-01 08:50:54 +00:00
94e5d1e5e6
[DeviceDrivers] Add MPU6050 and BMI055 sensor.
2015-02-01 16:17:06 +08:00
19ee2c7e09
Merge pull request #416 from bright-pan/master
...
[Driver/ringbuffer]: Fix put_force bug
2015-01-26 11:14:03 +08:00
2d67fe6565
[Driver/ringbuffer]: Fix put_force bug
...
OXape reports: http://www.rt-thread.org/phpBB3/topic3939.html
driver/ringbuffer: when data length is bigger than space length
for rb, the read_index in rb is not update.
When length > space, update the read_index, the bug can be fix, and
works fine.
2015-01-23 13:27:52 +08:00
73d5acecba
[DeviceDrivers] Add pin.h in the rtdevice.h
2015-01-20 07:24:49 +00:00
1bb425e839
[DeviceDrivers] code cleanup for hardware pin
2015-01-19 08:56:43 +00:00
d01b2ca84b
[DeviceDrivers] Add pin io driver framework
2015-01-19 06:18:16 +00:00
f6ed27b863
[DeviceDrivers] Fix sensor_poll issue.
2015-01-04 20:01:52 +08:00
06454fd484
[DeviceDrivers] change tab to space in sensor.
2015-01-04 13:14:53 +08:00
a6251a439e
Use open_flag for serial device.
2015-01-04 12:25:20 +08:00
46bca6f84a
Add C programming language APIs.
2015-01-04 12:24:46 +08:00
58163f49e0
[DeviceDriver] change the name style of method of C++ code; Add raw mode for sensor.
2014-12-31 22:33:54 +08:00
c26b999360
Fix the sensor list issue.
2014-12-01 12:22:17 +08:00
92fac29f70
update RW009 driver: add softAP support.
2014-11-15 16:11:24 +08:00
6281ab2bbe
[DeviceDriver] Remove i2c_core_lock.
2014-11-01 16:38:53 +08:00
0fa10629f7
[Sensor] code cleanup
2014-11-01 15:52:25 +08:00
18cd95688d
[Drivers] Add sensor framework
2014-11-01 09:09:52 +08:00
3c99a5bf8d
update RW009 wifi driver.
2014-09-24 12:08:01 +08:00
03496f0700
update RW009 driver.
2014-09-08 16:59:52 +08:00
8a44c7dbfb
[Serial] BUG Fix: data be send twice in mode that other than polling
2014-09-01 23:43:50 +08:00
69d089cac0
Update SConscript: add spi to include path.
2014-08-29 21:53:28 +08:00
0ad17f462d
[DeviceDrivers] Add modification under Linux
2014-08-04 16:40:40 +08:00
5397e18c56
[DeviceDrivers] Fix compiling warning.
2014-08-03 14:29:46 +08:00
0fc1ac6189
add more SPI device driver.
2014-07-31 16:58:43 +08:00
c45f5a2490
[Drivers] re-write serial framework.
2014-07-18 06:45:54 +08:00
64a2902fa9
1. Fix some spell error;
...
2. Fix data transfer size calculate error issue;
2014-07-13 17:19:34 +08:00
005014e7d0
[Drivers] Add workqueue implementation.
2014-07-13 07:27:57 +08:00
d0debf9892
[Drivers] Make code cleanup in serial framework.
2014-07-10 13:32:16 +08:00
d5b0c94552
[USB]fix rt_usbd_set_config() BUG which set the USB device to configuration state before enumerating the device.
2014-04-06 21:02:23 +08:00
306e1ac43f
[DeviceDrivers] Add watchdog driver frame work
2014-03-04 14:32:56 +08:00
020e95d91b
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2014-03-04 09:14:48 +08:00
0fb9c54efd
1.replace API prefix usb* with usbh* in USB host stack to distinct with USB device stack;
...
2.adjust some viable and micro name
3.some other small fix
2014-03-04 08:59:53 +08:00
f615c1e92d
Revert "Merge pull request #241 from bright-pan/master"
...
This reverts commit 5aeedc4f3a3d80e414ff
2014-03-03 12:07:13 +08:00
9ab853aca3
Fix rt_serial_control() bug for customized command and indent the code
2014-02-28 18:22:50 +08:00
10c4b6263f
Use DeviceDriver ringbuffer.
...
Add hardware flow support.
Use new struct serial_ringbuffer.
2014-02-26 11:06:14 +08:00
8fd0a7f9c6
Update USB Device Stack to support more device controllers;
...
Pass USB CV test verification;
Code cleanup;
2014-02-16 17:42:35 +08:00
ec7fada97e
[Drivers] Fix the block start issue in MTD Nand operators
2013-12-30 18:14:09 +08:00
42ae1c634d
[Drivers] Add more debug utilities in MTD nand
2013-12-29 22:27:33 +08:00
6bb2c0f2ea
Revert "serial: set the errno if and only if in thread context"
...
This reverts commit 07bd09fc0f
2013-10-25 21:23:15 +08:00
07bd09fc0f
serial: set the errno if and only if in thread context
...
The errno is associated with threads. It will crash the thread if we set
it in interrupt context.
2013-10-25 20:31:02 +08:00
21fb9a0bac
serial: do onthing if the size of read/write is zero
...
Return early if the size is 0 as there is nothing to do.
2013-10-25 20:15:08 +08:00
0feefc03b6
device/pipe: add a control cmd to get the space left in pipe
2013-10-23 01:43:18 +08:00
281e55e973
notification function: rt_err_t (*tx_complete)(rt_device_t dev, void
...
*buffer) with buffer pointer
2013-09-24 20:57:00 +08:00
246bdde8de
dev/portal: fix bug in portal callback forwarding
...
When forwarding rx/tx callback from the underlaying device(pipe), the
"dev" argument should be the portal. So the portal callback could think
itself as called.
2013-08-22 16:43:06 +08:00
824261d3bc
dev/portal: add checks on oflag
...
It does not make sense to open portal without a flag. One should open a
portal with RT_DEVICE_OFLAG_RDWR in most cases.
2013-08-22 15:12:00 +08:00
6e676e7754
dev/portal: implement portal device
...
Portal is a device that connect devices. Currently, you can only connect
pipes in portal. Pipes are unidirectional. But with portal, you can
construct a bidirectional device with two pipes.
2013-08-20 12:54:43 +08:00
7e68096a88
dev/pipe: make pipe a type of device
...
Pipe have many differences with char device. The main difference is
altough pipe have both read and write, it is unidirectional in nature.
2013-08-20 10:16:55 +08:00
0340300f89
dev/pipe: cleanup
2013-08-19 16:25:17 +08:00
e8cca2315a
dev/pipe: call rx_indicate the time we resume reader
...
Some reader(FinSh again) would like to block on a semaphore which is
released in rx_indicate. So we should invoke rx_indicate in
_rt_pipe_resume_reader.
2013-08-19 15:57:59 +08:00
d683d32bd5
device/pipe: add nonblocking read/write and force write mode
...
The previous implementation will always blocks the reader/writer.
However, at least FinSh would expect the device to be nonblocking ---
read should return 0 when there is no data in it.
2013-08-19 15:35:56 +08:00
4919d29d69
ringbuffer: add put_force and putchar_force API
...
Add the APIs that will discard the old data when rb is full.
2013-08-19 15:32:42 +08:00
981d929b56
ringbuffer: fix the ambiguous name
...
RT_RINGBUFFER_SIZE could mean "the size of the whole buffer", "the size
of the empty space" or "the size of the data". Moreover, it's never a
micro anymore. Change it to rt_ringbuffer_data_len before it's too late.
Also, RT_RINGBUFFER_EMPTY is changed to rt_ringbuffer_space_len.
2013-08-19 14:12:35 +08:00
38ce3879d8
device/pipe: add rt_pipe_{init,detach}
...
This provide the possibility that allocate the buffer of the ringbuffer
on a specific region, instead of always mallocing it. It also bring us
the benefit of using pipe device on the systems without heap.
2013-08-19 12:28:59 +08:00
a431a25699
Merge pull request #135 from reynoldxu/K60Fxxxx
...
K60 fxxxx
2013-07-25 03:55:52 -07:00
10c75c3dc6
remove a var for INT_TX.
2013-07-25 10:18:33 +08:00
8f0fffc132
fix a bug in rt_hw_uart_init() where u CAN NOT init some feature.
2013-07-24 18:34:07 +08:00
a124e7bd22
add initialization debug code
2013-07-24 07:33:48 +08:00
03cf76e7ef
reformat the coding style in usbdevice/core/core.c
2013-06-29 10:32:27 +08:00
3359419d4f
additional update
2013-06-28 00:39:11 +08:00
621fbdb90c
Embedded GPLv2 license in drivers
2013-06-28 00:36:54 +08:00
98c8a23e94
Add component initialization.
2013-06-23 07:48:42 +08:00
02869d7e67
udisk can be eject
2013-06-15 23:02:50 +08:00
b02993c989
usbdevice/core: cope with some buggy drivers on USB_MSG_DATA_NOTIFY
...
Some driver will emit USB_MSG_DATA_NOTIFY before the USB get configured.
Filter out those events.
2013-06-11 11:50:05 +08:00
ed19483cb4
usb: add USB_MSG_PLUG_OUT event
...
When the core received an USB_MSG_PLUG_OUT event, it will stop all the
classes. This make a chance that the classes could get rid off doing
useless stuff while the USB cable is plugged out.
2013-06-06 15:21:40 +08:00
376a08d89a
return correct length of LangID string to host
2013-05-30 18:26:52 +08:00
624d947e56
use __rt_ffs instead of ffs
2013-05-25 18:57:01 +08:00
a33e992724
Merge pull request #95 from grissiom/vcom
...
usbdevice/core: add reset function to support hotplug
2013-05-25 01:05:00 -07:00
97a507e667
usbdevice/core: add reset function to support hotplug
...
When the USB got RESET packet from the host and the address is setup,
all the classes will got reset. The reset is done by class stop and than
class run. So the classes should reset their internal state in
class_{run,stop}.
Besides, the USB device driver could post a USB_MSG_RESET message on
every RESET packet.
2013-05-25 15:55:27 +08:00
2e25159a83
Merge pull request #94 from grissiom/vcom
...
cdc_vcom: reset the vcom state in proper cases
2013-05-25 00:52:05 -07:00
046182be94
cdc_vcom: reset the vcom state in proper cases
...
Reset the vcom state in class_{run,stop} and when the PC is not
receiving data from me.
2013-05-25 15:25:32 +08:00
8aa4eb7924
make Host can halt endpoints
2013-05-23 12:33:22 +08:00
e822f87b1a
Merge pull request #90 from heyuanjie87/ForPullRequest
...
For pull request
2013-05-17 06:39:05 -07:00
c77c69c46e
fix spelling error.
2013-05-17 20:59:38 +08:00
9a671a5002
move initial alarm event & mutex in system init.
2013-05-17 20:58:40 +08:00
36fc5520cb
format code by Astyle.
2013-05-17 20:57:05 +08:00
8b4aadb4db
add usb state
2013-05-17 20:53:05 +08:00
b3e38f53b4
usbdevice/core: use static message queue
...
Although currently the only message send to the queue is struct
udev_msg, in order to keep backward compacity and for extention in the
future, we set the size of message to 32.
2013-05-12 15:43:30 +08:00
f0d50a7b36
usbdevice/core: use static thread instead of dynamic thread
...
It also add two configurations for the USB device even loop thread:
RT_USBD_THREAD_STACK_SZ to set the stack size, default to 2048
RT_USBD_THREAD_PRIO to set the priority, default to 8
You can overwrite the default values in rtconfig.h
2013-05-12 15:43:29 +08:00
f1e34eef11
Merge pull request #86 from grissiom/serial-rb-size
...
serial: use RT_SERIAL_RB_BUFSZ to define the size of ring buffer.
2013-05-11 23:18:18 -07:00
8e9e7f3e7c
serial: use RT_SERIAL_RB_BUFSZ to define the size of ring buffer.
2013-05-12 14:03:11 +08:00
aa179e4438
cdc_vcom: not to start sending data when the data is already sending
...
We start the sending transaction in SOF handler. But if the data is
already sending, start an other transaction will cause data lose.
Implement a state machine is cdc_vcom and avoid that.
2013-05-12 13:27:13 +08:00
armink
Bernard Xiong
gbcwbz
Bluebear233
heyuanjie87
weety
quintin
aozima
Aubr.Cool
SchumyHao
ItsEddy
KodakWang
Bright Pan
shaolin
Grissiom
Bright Pan
Bernard Xiong
joyhope
reynoldxu
yiyue.fang