As the svc stack is the stack of threads, there is no need to allocate a
separate stack for the startup. Reuse the IRQ stack should be OK.
Tested on rm48 board.
for 2013-02-20 aozima commmit "port for gcc", but the commit is
not tested,and the kernel is breakdown in context_gcc.S, the file
is a copy from cortex-m3,but not port for cortex-m0, so i complete
this port for aozima, test it in stm32f0discovery board ,
and it works fine.
You need to turn on RT_VFP_LAZY_STACKING in rtconfig.h. By default, RTT
will turn on VFP for all threads and stack all the VFP registers. When
doing lazy stacking, VFP will only be turned on for the thread who
issued VFP instructions.
Currently, if a thread turned on VFP, it cannot be turned off. RTT will
never know what time the thread doesn't need VFP any more. The thread
might could turn off the VFP for it self in proper time.
When saving thread registers in context_switch_interrupt_to, we don't
change them, just move them. So there is no need to always r0-r3 from
stack to the real r0-r3. So just use the intermediate registers and
eliminate 2 MOV.
We currently only support building with CCS and SCons is not using.
bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file.
You may need to regenerate the source file as you like, providing that:
1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The
channel 5 in enabled and connected to IRQ.
2, RTI driver is enabled and compare3 source is selected to counter1
and the compare3 will generate tick in the period of 10ms. This
value is coresponding with RT_TICK_PER_SECOND in rtconfig.h.
In CCS, you need to create a new CCS project and create link folders
pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember
to add the include path to the Build Properties.
Grissiom
RTsien
Bright Pan
Bernard Xiong
weety
Peng Fan
aozima
visitor83
visitor83
yiyue.fang