[BSP] Remove some board information.

bsp/x1000/Kconfig

@@ -8,8 +8,8 @@ config $BSP_DIR
 config $RTT_DIR
     string
     option env="RTT_ROOT"
-    default "E:/rt-thread"
+    default "../.."
-    
+
 # you can change the RTT_ROOT default "../.." to your rtthread_root,
 # example : default "F:/git_repositories/rt-thread"
 
@@ -21,4 +21,3 @@ config $PKGS_DIR
 source "$RTT_DIR/KConfig"
 source "$PKGS_DIR/KConfig"
 source "$BSP_DIR/drivers/Kconfig"
-

bsp/x1000/drivers/Kconfig

@@ -1,27 +1,24 @@
 choice
-    prompt "Choice bsp board"
+    prompt "Board Type"
     default BOARD_HALLEY2_REALBOARD_V2
-    
+
-    config BOARD_HALLEY2
-        bool "Using haller2 board"
-        
     config BOARD_PHOENIX
-        bool "Using phoenix board"
+        bool "Phoenix board"
+
+    config BOARD_HALLEY2
+        bool "Halley2 board"
 
     config BOARD_CANNA
-        bool "Using canna board"
+        bool "CANNA board"
-    
+
     config BOARD_HALLEY2_FIR
-        bool "Using haller2 fir board"
+        bool "Fir board"
-    
+
     config BOARD_HALLEY2_REALBOARD
-        bool "Using haller2 realboard board"
+        bool "RealBoard board"
-        
+
     config BOARD_HALLEY2_REALBOARD_V2
-        bool "Using haller2 realboard v2 board"
+        bool "RealBoard v2 board"
-    
-    config BOARD_HALLEY2_IDELAN
-        bool "Using haller2 idelan board"
 endchoice
 
 if RT_USING_SERIAL
@@ -31,8 +28,8 @@ if RT_USING_SERIAL
 
     config RT_USING_UART1
         bool "Using UART1"
-        default n    
+        default n
-        
+
     config RT_USING_UART2
         bool "Using UART2"
         default y
@@ -40,39 +37,39 @@ endif
 
 if RT_USING_SDIO
     config RT_USING_MSC0
-        bool "Using MSC0 for sd card"
+        bool "Using MMC/SD 0"
         default y
-        
+
     config RT_USING_MSC1
-        bool "Using MSC1 for wifi"
+        bool "Using MMC/SD 1"
         default y
 
     config RT_MMCSD_STACK_SIZE
-    int "Set mmc thread stack size"
+        int "Set MMC/SD thread stack size"
-    default 2048
+        default 2048
 endif
 
 if RT_USING_GUIENGINE
     config RT_USING_SLCD
-        bool "Using lcd display"
+        bool "Using LCD display"
         default y
-        
+
     if RT_USING_SLCD
         choice
             prompt "Choice LCD controller"
             default RT_USING_ILI9488
-            
+
             config RT_USING_ILI9488
-                bool "Using  ILI9488 controller"
+                bool "Using ILI9488 controller"
-                
+
             config RT_USING_ILI9341
-                bool "Using  ILI9341 controller"
+                bool "Using ILI9341 controller"
 
             config RT_USING_OTM4802
-                bool "Using  OTM4802 controller"
+                bool "Using OTM4802 controller"
-            
+
             config RT_USING_TRULY_TFT240240
-                bool "Using  TFT240240 controller"
+                bool "Using TFT240240 controller"
         endchoice
     endif
 
@@ -80,19 +77,19 @@ if RT_USING_GUIENGINE
         config RT_USING_TOUCH
             bool "Using touch"
             default y
-            
+
         if RT_USING_TOUCH
             choice
                 prompt "Choice touch controller"
                 default RT_USING_GT9XX
-                
+
                 config RT_USING_GT9XX
                     bool "Using  GT9XX controller"
-                    
+
                 config RT_USING_FT6x06
                     bool "Using  FT6x06 controller"
             endchoice
-            
+
             config RT_TOUCH_THREAD_PRIORITY
                 int "Set touch thread priority"
                 range 2 32
@@ -105,7 +102,7 @@ if RT_USING_I2C
     config RT_USING_I2C0
         bool "Using iic0 bus"
         default y
-        
+
     config RT_USING_I2C1
         bool "Using iic1 bus"
         default n
@@ -115,17 +112,14 @@ if RT_USING_I2C
         default n
 endif
 
+config RT_USING_ICODEC
+    default n
+
 config RT_USING_AUDIO
     bool "Using audio"
+    select RT_USING_ICODEC
     default n
-if RT_USING_AUDIO
-    config RT_USING_ICODEC
-    bool "Using icodec"
-    default n
-endif
 
 config RT_USING_CPU_FFS
     bool "Using CPU FFS"
     default y
-
-

bsp/x1000/drivers/board.h

@@ -44,10 +44,6 @@
 #include "board/halley2_realboard_v2/board_halley2_readboard_v2.h"
 #endif
 
-#ifdef BOARD_HALLEY2_IDELAN
-#include "board/halley2_idelan/board_halley2_idelan.h"
-#endif
-
 #ifdef BOARD_HALLEY2
 #include "board/halley2/board_halley2.h"
 #endif

bsp/x1000/drivers/board/halley2_idelan/README_20160819.txt

@@ -1,6 +0,0 @@
-2016/08/29发布
-已知的硬件错误：
--I2S 信号分配错误 I2SDI I2SDO反了  核心板的DO是输出  Codec的DO也是输出，核心板的DO需要接到Codec的SDI0上
--X1 12.288晶振不焊接，R13 需要焊接，核心板提供时钟（layout的时候，晶振保留）
--
--layout问题，整个板子GND走线 很多实连接，手工焊接质量不保证

bsp/x1000/drivers/board/halley2_idelan/board_halley2_idelan.h

@@ -1,5 +0,0 @@
-#ifndef BOARD_HALLEY2_IDELAN_H__
-#define BOARD_HALLEY2_IDELAN_H__
-
-
-#endif

bsp/x1000/drivers/board_io.c

@@ -109,35 +109,6 @@ int io_phoenix(void)
 INIT_DEVICE_EXPORT(io_phoenix);
 #endif
 
-#if defined(BOARD_OX)
-int io_ox(void)
-{
-    /* PB6 for Audio Shutdown IO */
-    gpio_set_func(GPIO_PORT_B, GPIO_Pin_6, GPIO_FUNC_1);
-    gpio_direction_output(GPIO_PORT_B,GPIO_Pin_6, 0);
-    gpio_set_value(GPIO_PORT_B,GPIO_Pin_6, 0);
-
-    gpio_direction_output(GPIO_PORT_C, GPIO_Pin_25, GPIO_OUTPUT0);
-    rt_thread_delay(rt_tick_from_millisecond(100));
-    gpio_direction_output(GPIO_PORT_C, GPIO_Pin_25, GPIO_OUTPUT1);
-
-    /* PB19 for LCD black light */
-    gpio_direction_output(GPIO_PORT_B,GPIO_Pin_19, GPIO_OUTPUT1);
-
-#ifdef RT_USING_EMAC
-    /* PC23 for MAC_RST_N */
-    // gpio_set_func(GPIO_PORT_C, GPIO_Pin_23, GPIO_FUNC_0);
-    gpio_direction_output(GPIO_PORT_C, GPIO_Pin_23, 0);
-    rt_thread_delay(1);
-    gpio_direction_output(GPIO_PORT_C, GPIO_Pin_23, 1);
-    rt_thread_delay(1);
-#endif
-
-    return 0;
-}
-INIT_DEVICE_EXPORT(io_ox);
-#endif
-
 #ifdef BOARD_HALLEY2_REALBOARD
 int io_realboard(void)
 {
@@ -194,7 +165,6 @@ int io_realboard_v2(void)
 INIT_BOARD_EXPORT(io_realboard_v2);
 #endif /* BOARD_HALLEY2_REALBOARD_V2 */
 
-
 #ifdef BOARD_HALLEY2_FIR
 int io_halley2_fir(void)
 {