stm32_radio: Updates the initialization sequence of the WM8978 driver, and adds EQ/sample rate control.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@373 bbd45198-f89e-11dd-88c7-29a3b14d5316
This commit is contained in:
kyle.hu.gz
parent
ce1868c241
commit
8d78b3743a
|
|
@ -1,37 +1,55 @@
|
|||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
#include "stm32f10x.h"
|
||||
|
||||
#include "codec.h"
|
||||
|
||||
/*
|
||||
SCLK PA5 SPI1_SCK
|
||||
SDIN PA7 SPI1_MOSI
|
||||
CSB PC5
|
||||
*/
|
||||
#define wm_csb_0 GPIO_ResetBits(GPIOC,GPIO_Pin_5)
|
||||
#define wm_csb_1 GPIO_SetBits(GPIOC,GPIO_Pin_5)
|
||||
#define CODEC_CSB_PORT GPIOC
|
||||
#define CODEC_CSB_PIN GPIO_Pin_5
|
||||
#define codec_set_csb() do { CODEC_CSB_PORT->BSRR = CODEC_CSB_PIN; } while (0)
|
||||
#define codec_reset_csb() do { CODEC_CSB_PORT->BRR = CODEC_CSB_PIN; } while (0)
|
||||
|
||||
void vol(uint16_t v);
|
||||
|
||||
#define DATA_NODE_MAX 5
|
||||
/* data node for Tx Mode */
|
||||
struct wm8753_data_node
|
||||
struct codec_data_node
|
||||
{
|
||||
rt_uint16_t *data_ptr;
|
||||
rt_size_t data_size;
|
||||
};
|
||||
|
||||
struct wm8753_device
|
||||
struct codec_device
|
||||
{
|
||||
/* inherit from rt_device */
|
||||
struct rt_device parent;
|
||||
|
||||
/* pcm data list */
|
||||
struct wm8753_data_node data_list[DATA_NODE_MAX];
|
||||
struct codec_data_node data_list[DATA_NODE_MAX];
|
||||
rt_uint16_t read_index, put_index;
|
||||
|
||||
/* transmitted offset of current data node */
|
||||
rt_size_t offset;
|
||||
};
|
||||
struct wm8753_device wm8753;
|
||||
struct codec_device codec;
|
||||
|
||||
struct pll_ratio
|
||||
{
|
||||
uint8_t n;
|
||||
uint8_t k1;
|
||||
uint16_t k2;
|
||||
uint16_t k3;
|
||||
};
|
||||
|
||||
static void delay_ms(unsigned int dt)
|
||||
{
|
||||
volatile unsigned int u;
|
||||
for (u = 0; u < dt * 30; u++);
|
||||
}
|
||||
|
||||
static void NVIC_Configuration(void)
|
||||
{
|
||||
|
|
@ -58,21 +76,20 @@ static void GPIO_Configuration(void)
|
|||
|
||||
/* Disable the JTAG interface and enable the SWJ interface */
|
||||
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC, ENABLE);
|
||||
|
||||
/* PC5 CODEC CS */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
|
||||
GPIO_InitStructure.GPIO_Pin = CODEC_CSB_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_Init(GPIOC,&GPIO_InitStructure);
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_Init(CODEC_CSB_PORT, &GPIO_InitStructure);
|
||||
|
||||
/* Configure SPI2 pins: CK, WS and SD */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_15;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
|
||||
#if 0
|
||||
#ifdef CODEC_USE_MCO
|
||||
/* MCO configure */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
|
|
@ -83,22 +100,21 @@ static void GPIO_Configuration(void)
|
|||
#endif
|
||||
}
|
||||
|
||||
#define SPI2_DR_Address 0x4000380C
|
||||
static void DMA_Configuration(rt_uint32_t addr, rt_size_t size)
|
||||
{
|
||||
DMA_InitTypeDef DMA_InitStructure;
|
||||
|
||||
/* DMA1 Channel2 configuration ----------------------------------------------*/
|
||||
DMA_Cmd(DMA1_Channel5, DISABLE);
|
||||
DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)SPI2_DR_Address;
|
||||
DMA_InitStructure.DMA_MemoryBaseAddr = (u32)addr;
|
||||
DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)(&(SPI2->DR));
|
||||
DMA_InitStructure.DMA_MemoryBaseAddr = (u32) addr;
|
||||
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
|
||||
DMA_InitStructure.DMA_BufferSize = size;
|
||||
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
||||
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
||||
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
|
||||
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
|
||||
DMA_InitStructure.DMA_Priority = DMA_Priority_Low;
|
||||
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
|
||||
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
|
||||
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
|
||||
DMA_Init(DMA1_Channel5, &DMA_InitStructure);
|
||||
|
|
@ -119,89 +135,190 @@ static void I2S_Configuration(void)
|
|||
I2S_InitStructure.I2S_DataFormat = I2S_DataFormat_16b;
|
||||
I2S_InitStructure.I2S_MCLKOutput = I2S_MCLKOutput_Disable;
|
||||
I2S_InitStructure.I2S_AudioFreq = I2S_AudioFreq_44k;
|
||||
I2S_InitStructure.I2S_CPOL = I2S_CPOL_High;// I2S_CPOL_Low
|
||||
I2S_InitStructure.I2S_CPOL = I2S_CPOL_High; // I2S_CPOL_Low
|
||||
|
||||
/* I2S2 Master Transmitter to I2S3 Slave Receiver communication -----------*/
|
||||
/* I2S2 configuration */
|
||||
I2S_InitStructure.I2S_Mode = I2S_Mode_MasterTx;//I2S_Mode_MasterTx I2S_Mode_SlaveTx
|
||||
I2S_InitStructure.I2S_Mode = I2S_Mode_MasterTx; //I2S_Mode_MasterTx I2S_Mode_SlaveTx
|
||||
I2S_Init(SPI2, &I2S_InitStructure);
|
||||
}
|
||||
|
||||
unsigned char SPI_WriteByte(unsigned char data)
|
||||
uint8_t SPI_WriteByte(unsigned char data)
|
||||
{
|
||||
unsigned char Data = 0;
|
||||
|
||||
//Wait until the transmit buffer is empty
|
||||
while(SPI_I2S_GetFlagStatus(SPI1,SPI_I2S_FLAG_TXE)==RESET);
|
||||
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_TXE) == RESET);
|
||||
// Send the byte
|
||||
SPI_I2S_SendData(SPI1,data);
|
||||
SPI_I2S_SendData(SPI1, data);
|
||||
|
||||
//Wait until a data is received
|
||||
while(SPI_I2S_GetFlagStatus(SPI1,SPI_I2S_FLAG_RXNE)==RESET);
|
||||
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_RXNE) == RESET);
|
||||
// Get the received data
|
||||
Data = SPI_I2S_ReceiveData(SPI1);
|
||||
data = SPI_I2S_ReceiveData(SPI1);
|
||||
|
||||
// Return the shifted data
|
||||
return Data;
|
||||
return data;
|
||||
}
|
||||
|
||||
void wm8753_send(rt_uint16_t s_data)
|
||||
static void codec_send(rt_uint16_t s_data)
|
||||
{
|
||||
wm_csb_0;
|
||||
SPI_WriteByte( (s_data>>8)&0xFF );
|
||||
SPI_WriteByte( s_data&0xFF );
|
||||
wm_csb_1;
|
||||
codec_reset_csb();
|
||||
SPI_WriteByte((s_data >> 8) & 0xFF);
|
||||
SPI_WriteByte(s_data & 0xFF);
|
||||
codec_set_csb();
|
||||
}
|
||||
|
||||
static rt_err_t wm8753_init (rt_device_t dev)
|
||||
static rt_err_t codec_init(rt_device_t dev)
|
||||
{
|
||||
wm8753_send(0<<9 | 0xFF); // reset
|
||||
codec_send(REG_SOFTWARE_RESET);
|
||||
|
||||
/* POWER manager */
|
||||
wm8753_send(1<<9 | (1<<8) | (0<<7) | (0<<6) | (0<<5) | (1<<4) | (1<<3) | (1<<2) | 2 );//电源设置
|
||||
wm8753_send(2<<9 | (1<<8) | (1<<7) | (1<<5) | (1<<4) | (1<<3) | (1<<2) ); // 打开电源 耳机输出
|
||||
wm8753_send(3<<9 | (0<<8) | (0<<7) | (1<<6) | (1<<5) | (1<<3) | (1<<2) | (1<<1) | 1 ); // 喇叭输出和DAC
|
||||
// 1.5x boost power up sequence.
|
||||
// Mute all outputs.
|
||||
codec_send(REG_LOUT1_VOL | LOUT1MUTE);
|
||||
codec_send(REG_ROUT1_VOL | ROUT1MUTE);
|
||||
codec_send(REG_LOUT2_VOL | LOUT2MUTE);
|
||||
codec_send(REG_ROUT2_VOL | ROUT2MUTE);
|
||||
// Enable unused output chosen from L/ROUT2, OUT3 or OUT4.
|
||||
codec_send(REG_POWER_MANAGEMENT3 | OUT4EN);
|
||||
// Set BUFDCOPEN=1 and BUFIOEN=1 in register R1
|
||||
codec_send(REG_POWER_MANAGEMENT1 | BUFDCOPEN | BUFIOEN);
|
||||
// Set SPKBOOST=1 in register R49.
|
||||
codec_send(REG_OUTPUT | SPKBOOST);
|
||||
// Set VMIDSEL[1:0] to required value in register R1.
|
||||
codec_send(REG_POWER_MANAGEMENT1 | BUFDCOPEN | BUFIOEN | VMIDSEL_75K);
|
||||
// Wait for VMID supply to settle.
|
||||
delay_ms(750);
|
||||
// Set L/RMIXEN=1 and DACENL/R=1 in register R3.
|
||||
codec_send(REG_POWER_MANAGEMENT3 | LMIXEN | RMIXEN | DACENL | DACENR);
|
||||
// Set BIASEN=1 in register R1.
|
||||
codec_send(REG_POWER_MANAGEMENT1 | BUFDCOPEN | BUFIOEN | VMIDSEL_75K | BIASEN);
|
||||
// Set L/ROUT2EN=1 in register R3.
|
||||
codec_send(REG_POWER_MANAGEMENT3 | LMIXEN | RMIXEN | DACENL | DACENR | LOUT2EN | ROUT2EN);
|
||||
// Enable other mixers as required.
|
||||
// Enable other outputs as required.
|
||||
codec_send(REG_POWER_MANAGEMENT2 | LOUT1EN | ROUT1EN | BOOSTENL | BOOSTENR | INPPGAENL | INPPGAENR);
|
||||
|
||||
/* IIS DAC test */
|
||||
wm8753_send(4<<9 | (0<<7) | (2<<3) );//IIS 16BIT
|
||||
// 12.288/3/8=512K
|
||||
wm8753_send(6<<9 | (0<<5) | (3<<2)| 0);//0: slave 1: master | (3<<5) | (3<<2)
|
||||
wm8753_send(43<<9 | (1<<4) );//INVROUT2
|
||||
// Digital inferface setup.
|
||||
codec_send(REG_AUDIO_INTERFACE | BCP_NORMAL | LRP_NORMAL | WL_16BITS | FMT_I2S);
|
||||
|
||||
/* 设置初始化音量 */
|
||||
wm8753_send(52<<9 | (1<<8) | (1<<7) | 35 ); // LOUT1 0-57-63
|
||||
wm8753_send(53<<9 | (1<<8) | (1<<7) | 35 ); // ROUT1 0-57-63
|
||||
wm8753_send(54<<9 | (1<<8) | (1<<7) | 35 ); // LOUT2 0-57-63
|
||||
wm8753_send(55<<9 | (1<<8) | (1<<7) | 35 ); // ROUT2 0-57-63
|
||||
// PLL setup.
|
||||
// fs = 44.1KHz / 256fs = 11.2896MHz
|
||||
// F_PLL = 11.2896MHz * 4 * 2 = 90.3168MHz
|
||||
// R = 90.3168MHz / 12.288MHz = 7.35
|
||||
// PLL_N = 7
|
||||
// PLL_K = 5872026
|
||||
codec_send(REG_PLL_N | 7);
|
||||
codec_send(REG_PLL_K1 | 0x16);
|
||||
codec_send(REG_PLL_K2 | 0xCC);
|
||||
codec_send(REG_PLL_K3 | 0x19A);
|
||||
codec_send(REG_POWER_MANAGEMENT1 | BUFDCOPEN | BUFIOEN | VMIDSEL_75K | BIASEN | PLLEN);
|
||||
codec_send(REG_CLOCK_GEN | CLKSEL_PLL | MCLK_DIV2);
|
||||
|
||||
#if 1
|
||||
/* LINE IN test */
|
||||
wm8753_send(47<<9 | (1<<8) | (1<<4) ); //L LINE_IN VOL (6:4)输入增益: 0-关 1-12DB 2-9DB 5-0db 7+6DB
|
||||
wm8753_send(48<<9 | (1<<8) | (1<<4) ); //R LINE_IN VOL (6:4)输入增益: 0-关 1-12DB 2-9DB 5-0db 7+6DB
|
||||
wm8753_send(50<<9 | (5<<2) | (1<<1) | (1<<0) );//打开左监听 (4:2)增益 0-关 1-12DB 2-9DB 5-0db 7+6DB
|
||||
wm8753_send(51<<9 | (5<<2) | (1<<1) | (1<<0) );//打开右监听 (4:2)增益 0-关 1-12DB 2-9DB 5-0db 7+6DB
|
||||
// Enable DAC 128x oversampling.
|
||||
codec_send(REG_DAC | DACOSR128);
|
||||
|
||||
/* MIC test */
|
||||
wm8753_send(44<<9 | (1<<8) | (1<<5) | (1<<4) | (0<<2) | (1<<1) | (1<<0) );//MIC输入选择
|
||||
wm8753_send(45<<9 | 50);//16-0 63-35
|
||||
wm8753_send(46<<9 | 50);//16-0 63-35
|
||||
#endif
|
||||
// Set LOUT2/ROUT2 in BTL operation.
|
||||
codec_send(REG_BEEP | INVROUT2);
|
||||
|
||||
// Set output volume to -22dB.
|
||||
vol(35);
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
// Exported functions
|
||||
#include <finsh.h>
|
||||
//0~57~63
|
||||
void vol(int v)
|
||||
{
|
||||
wm8753_send(52<<9 | (0<<8) | (1<<7) | v ); // LOUT1 0-57-63
|
||||
wm8753_send(53<<9 | (1<<8) | (1<<7) | v ); // ROUT1 0-57-63
|
||||
wm8753_send(54<<9 | (0<<8) | (1<<7) | v ); // LOUT2 0-57-63
|
||||
wm8753_send(55<<9 | (1<<8) | (1<<7) | v ); // ROUT2 0-57-63
|
||||
}
|
||||
FINSH_FUNCTION_EXPORT(vol, set volume)
|
||||
|
||||
static rt_err_t wm8753_open(rt_device_t dev, rt_uint16_t oflag)
|
||||
void vol(uint16_t v)
|
||||
{
|
||||
v = (v & VOL_MASK) << VOL_POS;
|
||||
codec_send(REG_LOUT1_VOL | v);
|
||||
codec_send(REG_ROUT1_VOL | HPVU | v);
|
||||
codec_send(REG_LOUT2_VOL | v);
|
||||
codec_send(REG_ROUT2_VOL | SPKVU | v);
|
||||
}
|
||||
|
||||
void eq1(uint8_t freq, uint8_t gain, uint8_t mode)
|
||||
{
|
||||
codec_send(REG_EQ1 | ((freq & EQC_MASK) << EQC_POS) | ((gain & EQG_MASK) << EQG_POS) | (mode ? EQ3DMODE_DAC : EQ3DMODE_ADC));
|
||||
}
|
||||
|
||||
void eq2(uint8_t freq, uint8_t gain, uint8_t bw)
|
||||
{
|
||||
codec_send(REG_EQ2 | ((freq & EQC_MASK) << EQC_POS) | ((gain & EQG_MASK) << EQG_POS) | (bw ? EQ2BW_WIDE : EQ2BW_NARROW));
|
||||
}
|
||||
|
||||
void eq3(uint8_t freq, uint8_t gain, uint8_t bw)
|
||||
{
|
||||
codec_send(REG_EQ3 | ((freq & EQC_MASK) << EQC_POS) | ((gain & EQG_MASK) << EQG_POS) | (bw ? EQ3BW_WIDE : EQ3BW_NARROW));
|
||||
}
|
||||
|
||||
void eq4(uint8_t freq, uint8_t gain, uint8_t bw)
|
||||
{
|
||||
codec_send(REG_EQ4 | ((freq & EQC_MASK) << EQC_POS) | ((gain & EQG_MASK) << EQG_POS) | (bw ? EQ4BW_WIDE : EQ4BW_NARROW));
|
||||
}
|
||||
|
||||
void eq5(uint8_t freq, uint8_t gain)
|
||||
{
|
||||
codec_send(REG_EQ2 | ((freq & EQC_MASK) << EQC_POS) | ((gain & EQG_MASK) << EQG_POS));
|
||||
}
|
||||
|
||||
void eq3d(uint8_t depth)
|
||||
{
|
||||
codec_send(REG_3D | ((depth & DEPTH3D_MASK) << DEPTH3D_POS));
|
||||
}
|
||||
|
||||
void sample_rate(uint8_t sr)
|
||||
{
|
||||
if (sr == 44)
|
||||
{
|
||||
codec_send(REG_ADDITIONAL | SR_48KHZ);
|
||||
codec_send(REG_CLOCK_GEN | CLKSEL_PLL | MCLK_DIV2);
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (sr)
|
||||
{
|
||||
case 8:
|
||||
codec_send(REG_ADDITIONAL | SR_8KHZ);
|
||||
break;
|
||||
|
||||
case 12:
|
||||
codec_send(REG_ADDITIONAL | SR_12KHZ);
|
||||
break;
|
||||
|
||||
case 16:
|
||||
codec_send(REG_ADDITIONAL | SR_16KHZ);
|
||||
break;
|
||||
|
||||
case 24:
|
||||
codec_send(REG_ADDITIONAL | SR_24KHZ);
|
||||
break;
|
||||
|
||||
case 32:
|
||||
codec_send(REG_ADDITIONAL | SR_32KHZ);
|
||||
break;
|
||||
|
||||
case 48:
|
||||
codec_send(REG_ADDITIONAL | SR_48KHZ);
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
codec_send(REG_CLOCK_GEN | CLKSEL_MCLK | MCLK_DIV1);
|
||||
}
|
||||
}
|
||||
|
||||
FINSH_FUNCTION_EXPORT(vol, Set volume);
|
||||
FINSH_FUNCTION_EXPORT(eq1, Set EQ1(Cut-off, Gain, Mode));
|
||||
FINSH_FUNCTION_EXPORT(eq2, Set EQ2(Center, Gain, Bandwidth));
|
||||
FINSH_FUNCTION_EXPORT(eq3, Set EQ3(Center, Gain, Bandwidth));
|
||||
FINSH_FUNCTION_EXPORT(eq4, Set EQ4(Center, Gain, Bandwidth));
|
||||
FINSH_FUNCTION_EXPORT(eq5, Set EQ5(Cut-off, Gain));
|
||||
FINSH_FUNCTION_EXPORT(eq3d, Set 3D(Depth));
|
||||
FINSH_FUNCTION_EXPORT(sample_rate, Set sample rate);
|
||||
|
||||
static rt_err_t codec_open(rt_device_t dev, rt_uint16_t oflag)
|
||||
{
|
||||
/* enable I2S */
|
||||
I2S_Cmd(SPI2, ENABLE);
|
||||
|
|
@ -209,7 +326,7 @@ static rt_err_t wm8753_open(rt_device_t dev, rt_uint16_t oflag)
|
|||
return RT_EOK;
|
||||
}
|
||||
|
||||
static rt_err_t wm8753_close(rt_device_t dev)
|
||||
static rt_err_t codec_close(rt_device_t dev)
|
||||
{
|
||||
/* interrupt mode */
|
||||
if (dev->flag & RT_DEVICE_FLAG_INT_TX)
|
||||
|
|
@ -223,24 +340,26 @@ static rt_err_t wm8753_close(rt_device_t dev)
|
|||
return RT_EOK;
|
||||
}
|
||||
|
||||
static rt_err_t wm8753_control(rt_device_t dev, rt_uint8_t cmd, void *args)
|
||||
static rt_err_t codec_control(rt_device_t dev, rt_uint8_t cmd, void *args)
|
||||
{
|
||||
/* rate control */
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
static rt_size_t wm8753_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
|
||||
static rt_size_t codec_write(rt_device_t dev, rt_off_t pos,
|
||||
const void* buffer, rt_size_t size)
|
||||
{
|
||||
struct wm8753_device* device;
|
||||
struct wm8753_data_node* node;
|
||||
struct codec_device* device;
|
||||
struct codec_data_node* node;
|
||||
rt_uint32_t level;
|
||||
rt_uint16_t next_index;
|
||||
|
||||
device = (struct wm8753_device*)dev;
|
||||
device = (struct codec_device*) dev;
|
||||
RT_ASSERT(device != RT_NULL);
|
||||
|
||||
next_index = device->put_index + 1;
|
||||
if (next_index >= DATA_NODE_MAX) next_index = 0;
|
||||
if (next_index >= DATA_NODE_MAX)
|
||||
next_index = 0;
|
||||
|
||||
/* check data_list full */
|
||||
if (next_index == device->read_index)
|
||||
|
|
@ -255,11 +374,12 @@ static rt_size_t wm8753_write (rt_device_t dev, rt_off_t pos, const void* buffer
|
|||
|
||||
// rt_kprintf("+\n");
|
||||
/* set node attribute */
|
||||
node->data_ptr = (rt_uint16_t*)buffer;
|
||||
node->data_ptr = (rt_uint16_t*) buffer;
|
||||
node->data_size = size >> 1; /* size is byte unit, convert to half word unit */
|
||||
|
||||
next_index = device->read_index + 1;
|
||||
if (next_index >= DATA_NODE_MAX) next_index = 0;
|
||||
if (next_index >= DATA_NODE_MAX)
|
||||
next_index = 0;
|
||||
|
||||
/* check data list whether is empty */
|
||||
if (next_index == device->put_index)
|
||||
|
|
@ -272,7 +392,7 @@ static rt_size_t wm8753_write (rt_device_t dev, rt_off_t pos, const void* buffer
|
|||
}
|
||||
else if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
|
||||
{
|
||||
DMA_Configuration((rt_uint32_t)node->data_ptr, node->data_size);
|
||||
DMA_Configuration((rt_uint32_t) node->data_ptr, node->data_size);
|
||||
}
|
||||
}
|
||||
rt_hw_interrupt_enable(level);
|
||||
|
|
@ -280,11 +400,11 @@ static rt_size_t wm8753_write (rt_device_t dev, rt_off_t pos, const void* buffer
|
|||
return size;
|
||||
}
|
||||
|
||||
rt_err_t wm8753_hw_init(void)
|
||||
rt_err_t codec_hw_init(void)
|
||||
{
|
||||
rt_device_t dev;
|
||||
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
|
||||
|
||||
|
|
@ -292,58 +412,59 @@ rt_err_t wm8753_hw_init(void)
|
|||
GPIO_Configuration();
|
||||
I2S_Configuration();
|
||||
|
||||
dev = (rt_device_t)&wm8753;
|
||||
dev = (rt_device_t) &codec;
|
||||
dev->type = RT_Device_Class_Unknown;
|
||||
dev->rx_indicate = RT_NULL;
|
||||
dev->tx_complete = RT_NULL;
|
||||
dev->init = wm8753_init;
|
||||
dev->open = wm8753_open;
|
||||
dev->close = wm8753_close;
|
||||
dev->init = codec_init;
|
||||
dev->open = codec_open;
|
||||
dev->close = codec_close;
|
||||
dev->read = RT_NULL;
|
||||
dev->write = wm8753_write;
|
||||
dev->control = wm8753_control;
|
||||
dev->write = codec_write;
|
||||
dev->control = codec_control;
|
||||
dev->private = RT_NULL;
|
||||
|
||||
/* set read_index and put index to 0 */
|
||||
wm8753.read_index = 0;
|
||||
wm8753.put_index = 0;
|
||||
codec.read_index = 0;
|
||||
codec.put_index = 0;
|
||||
|
||||
/* unselect */
|
||||
wm_csb_1;
|
||||
codec_set_csb();
|
||||
|
||||
/* register the device */
|
||||
return rt_device_register(&wm8753.parent, "snd",
|
||||
RT_DEVICE_FLAG_WRONLY | RT_DEVICE_FLAG_DMA_TX);
|
||||
return rt_device_register(&codec.parent, "snd", RT_DEVICE_FLAG_WRONLY | RT_DEVICE_FLAG_DMA_TX);
|
||||
}
|
||||
|
||||
void wm8753_isr()
|
||||
void codec_isr()
|
||||
{
|
||||
struct wm8753_data_node* node;
|
||||
node = &wm8753.data_list[wm8753.read_index]; /* get current data node */
|
||||
struct codec_data_node* node;
|
||||
node = &codec.data_list[codec.read_index]; /* get current data node */
|
||||
|
||||
if (SPI_I2S_GetITStatus(SPI2, SPI_I2S_IT_TXE) == SET)
|
||||
{
|
||||
SPI_I2S_SendData(SPI2, node->data_ptr[wm8753.offset++]);
|
||||
SPI_I2S_SendData(SPI2, node->data_ptr[codec.offset++]);
|
||||
}
|
||||
|
||||
if (wm8753.offset == node->data_size)
|
||||
if (codec.offset == node->data_size)
|
||||
{
|
||||
/* move to next node */
|
||||
rt_uint16_t next_index;
|
||||
|
||||
next_index = wm8753.read_index + 1;
|
||||
if (next_index >= DATA_NODE_MAX) next_index = 0;
|
||||
next_index = codec.read_index + 1;
|
||||
if (next_index >= DATA_NODE_MAX)
|
||||
next_index = 0;
|
||||
|
||||
/* notify transmitted complete. */
|
||||
if (wm8753.parent.tx_complete != RT_NULL)
|
||||
if (codec.parent.tx_complete != RT_NULL)
|
||||
{
|
||||
wm8753.parent.tx_complete (&wm8753.parent, wm8753.data_list[wm8753.read_index].data_ptr);
|
||||
codec.parent.tx_complete(&codec.parent,
|
||||
codec.data_list[codec.read_index].data_ptr);
|
||||
rt_kprintf("-\n");
|
||||
}
|
||||
|
||||
wm8753.offset = 0;
|
||||
wm8753.read_index = next_index;
|
||||
if (next_index == wm8753.put_index)
|
||||
codec.offset = 0;
|
||||
codec.read_index = next_index;
|
||||
if (next_index == codec.put_index)
|
||||
{
|
||||
/* no data on the list, disable I2S interrupt */
|
||||
SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, DISABLE);
|
||||
|
|
@ -353,24 +474,24 @@ void wm8753_isr()
|
|||
}
|
||||
}
|
||||
|
||||
void wm8753_dma_isr()
|
||||
void codec_dma_isr()
|
||||
{
|
||||
/* switch to next buffer */
|
||||
rt_uint16_t next_index;
|
||||
void* data_ptr;
|
||||
|
||||
next_index = wm8753.read_index + 1;
|
||||
if (next_index >= DATA_NODE_MAX) next_index = 0;
|
||||
next_index = codec.read_index + 1;
|
||||
if (next_index >= DATA_NODE_MAX)
|
||||
next_index = 0;
|
||||
|
||||
/* save current data pointer */
|
||||
data_ptr = wm8753.data_list[wm8753.read_index].data_ptr;
|
||||
data_ptr = codec.data_list[codec.read_index].data_ptr;
|
||||
|
||||
wm8753.read_index = next_index;
|
||||
if (next_index != wm8753.put_index)
|
||||
codec.read_index = next_index;
|
||||
if (next_index != codec.put_index)
|
||||
{
|
||||
/* enable next dma request */
|
||||
DMA_Configuration((rt_uint32_t)wm8753.data_list[wm8753.read_index].data_ptr,
|
||||
wm8753.data_list[wm8753.read_index].data_size);
|
||||
DMA_Configuration((rt_uint32_t) codec.data_list[codec.read_index].data_ptr, codec.data_list[codec.read_index].data_size);
|
||||
}
|
||||
else
|
||||
{
|
||||
|
|
@ -378,10 +499,9 @@ void wm8753_dma_isr()
|
|||
}
|
||||
|
||||
/* notify transmitted complete. */
|
||||
if (wm8753.parent.tx_complete != RT_NULL)
|
||||
if (codec.parent.tx_complete != RT_NULL)
|
||||
{
|
||||
wm8753.parent.tx_complete (&wm8753.parent, data_ptr);
|
||||
codec.parent.tx_complete(&codec.parent, data_ptr);
|
||||
// rt_kprintf("-\n");
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,627 @@
|
|||
#ifndef __CODEC_H__
|
||||
#define __CODEC_H__
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define REG_SOFTWARE_RESET ((uint16_t)0)
|
||||
#define REG_POWER_MANAGEMENT1 ((uint16_t)(1 << 9))
|
||||
#define REG_POWER_MANAGEMENT2 ((uint16_t)(2 << 9))
|
||||
#define REG_POWER_MANAGEMENT3 ((uint16_t)(3 << 9))
|
||||
#define REG_AUDIO_INTERFACE ((uint16_t)(4 << 9))
|
||||
#define REG_COMPANDING ((uint16_t)(5 << 9))
|
||||
#define REG_CLOCK_GEN ((uint16_t)(6 << 9))
|
||||
#define REG_ADDITIONAL ((uint16_t)(7 << 9))
|
||||
#define REG_GPIO ((uint16_t)(8 << 9))
|
||||
#define REG_JACK_DETECT1 ((uint16_t)(9 << 9))
|
||||
#define REG_DAC ((uint16_t)(10 << 9))
|
||||
#define REG_LEFT_DAC_VOL ((uint16_t)(11 << 9))
|
||||
#define REG_RIGHT_DAC_VOL ((uint16_t)(12 << 9))
|
||||
#define REG_JACK_DETECT2 ((uint16_t)(13 << 9))
|
||||
#define REG_ADC ((uint16_t)(14 << 9))
|
||||
#define REG_LEFT_ADC_VOL ((uint16_t)(15 << 9))
|
||||
#define REG_RIGHT_ADC_VOL ((uint16_t)(16 << 9))
|
||||
#define REG_EQ1 ((uint16_t)(18 << 9))
|
||||
#define REG_EQ2 ((uint16_t)(19 << 9))
|
||||
#define REG_EQ3 ((uint16_t)(20 << 9))
|
||||
#define REG_EQ4 ((uint16_t)(21 << 9))
|
||||
#define REG_EQ5 ((uint16_t)(22 << 9))
|
||||
#define REG_DAC_LIMITER1 ((uint16_t)(24 << 9))
|
||||
#define REG_DAC_LIMITER2 ((uint16_t)(25 << 9))
|
||||
#define REG_NOTCH_FILTER1 ((uint16_t)(27 << 9))
|
||||
#define REG_NOTCH_FILTER2 ((uint16_t)(28 << 9))
|
||||
#define REG_NOTCH_FILTER3 ((uint16_t)(29 << 9))
|
||||
#define REG_NOTCH_FILTER4 ((uint16_t)(30 << 9))
|
||||
#define REG_ALC1 ((uint16_t)(32 << 9))
|
||||
#define REG_ALC2 ((uint16_t)(33 << 9))
|
||||
#define REG_ALC3 ((uint16_t)(34 << 9))
|
||||
#define REG_NOISE_GATE ((uint16_t)(35 << 9))
|
||||
#define REG_PLL_N ((uint16_t)(36 << 9))
|
||||
#define REG_PLL_K1 ((uint16_t)(37 << 9))
|
||||
#define REG_PLL_K2 ((uint16_t)(38 << 9))
|
||||
#define REG_PLL_K3 ((uint16_t)(39 << 9))
|
||||
#define REG_3D ((uint16_t)(41 << 9))
|
||||
#define REG_BEEP ((uint16_t)(43 << 9))
|
||||
#define REG_INPUT ((uint16_t)(44 << 9))
|
||||
#define REG_LEFT_PGA_GAIN ((uint16_t)(45 << 9))
|
||||
#define REG_RIGHT_PGA_GAIN ((uint16_t)(46 << 9))
|
||||
#define REG_LEFT_ADC_BOOST ((uint16_t)(47 << 9))
|
||||
#define REG_RIGHT_ADC_BOOST ((uint16_t)(48 << 9))
|
||||
#define REG_OUTPUT ((uint16_t)(49 << 9))
|
||||
#define REG_LEFT_MIXER ((uint16_t)(50 << 9))
|
||||
#define REG_RIGHT_MIXER ((uint16_t)(51 << 9))
|
||||
#define REG_LOUT1_VOL ((uint16_t)(52 << 9))
|
||||
#define REG_ROUT1_VOL ((uint16_t)(53 << 9))
|
||||
#define REG_LOUT2_VOL ((uint16_t)(54 << 9))
|
||||
#define REG_ROUT2_VOL ((uint16_t)(55 << 9))
|
||||
#define REG_OUT3_MIXER ((uint16_t)(56 << 9))
|
||||
#define REG_OUT4_MIXER ((uint16_t)(57 << 9))
|
||||
|
||||
// R01 REG_POWER_MANAGEMENT1
|
||||
#define BUFDCOPEN (1 << 8)
|
||||
#define OUT4MIXEN (1 << 7)
|
||||
#define OUT3MIXEN (1 << 6)
|
||||
#define PLLEN (1 << 5)
|
||||
#define MICBEN (1 << 4)
|
||||
#define BIASEN (1 << 3)
|
||||
#define BUFIOEN (1 << 2)
|
||||
#define VMIDSEL_OFF (0)
|
||||
#define VMIDSEL_75K (1)
|
||||
#define VMIDSEL_300K (2)
|
||||
#define VMIDSEL_5K (3)
|
||||
|
||||
// R02 REG_POWER_MANAGEMENT2
|
||||
#define ROUT1EN (1 << 8)
|
||||
#define LOUT1EN (1 << 7)
|
||||
#define SLEEP (1 << 6)
|
||||
#define BOOSTENR (1 << 5)
|
||||
#define BOOSTENL (1 << 4)
|
||||
#define INPPGAENR (1 << 3)
|
||||
#define INPPGAENL (1 << 2)
|
||||
#define ADCENR (1 << 1)
|
||||
#define ADCENL (1)
|
||||
|
||||
// R03 REG_POWER_MANAGEMENT3
|
||||
#define OUT4EN (1 << 8)
|
||||
#define OUT3EN (1 << 7)
|
||||
#define LOUT2EN (1 << 6)
|
||||
#define ROUT2EN (1 << 5)
|
||||
#define RMIXEN (1 << 3)
|
||||
#define LMIXEN (1 << 2)
|
||||
#define DACENR (1 << 1)
|
||||
#define DACENL (1)
|
||||
|
||||
// R04 REG_AUDIO_INTERFACE
|
||||
#define BCP_NORMAL (0)
|
||||
#define BCP_INVERTED (1 << 8)
|
||||
#define LRP_NORMAL (0)
|
||||
#define LRP_INVERTED (1 << 7)
|
||||
#define WL_16BITS (0)
|
||||
#define WL_20BITS (1 << 5)
|
||||
#define WL_24BITS (2 << 5) // Default value
|
||||
#define WL_32BITS (3 << 5)
|
||||
#define FMT_RIGHT_JUSTIFIED (0)
|
||||
#define FMT_LEFT_JUSTIFIED (1 << 3)
|
||||
#define FMT_I2S (2 << 3) // Default value
|
||||
#define FMT_PCM (3 << 3)
|
||||
#define DACLRSWAP (1 << 2)
|
||||
#define ADCLRSWAP (1 << 1)
|
||||
#define MONO (1)
|
||||
|
||||
// R05 REG_COMPANDING
|
||||
#define WL8 (1 << 5)
|
||||
#define DAC_COMP_OFF (0) // Default value
|
||||
#define DAC_COMP_ULAW (2 << 3)
|
||||
#define DAC_COMP_ALAW (3 << 3)
|
||||
#define ADC_COMP_OFF (0) // Default value
|
||||
#define ADC_COMP_ULAW (2 << 1)
|
||||
#define ADC_COMP_ALAW (3 << 1)
|
||||
#define LOOPBACK (1)
|
||||
|
||||
// R06 REG_CLOCK_GEN
|
||||
#define CLKSEL_MCLK (0)
|
||||
#define CLKSEL_PLL (1 << 8) // Default value
|
||||
#define MCLK_DIV1 (0)
|
||||
#define MCLK_DIV1_5 (1 << 5)
|
||||
#define MCLK_DIV2 (2 << 5) // Default value
|
||||
#define MCLK_DIV3 (3 << 5)
|
||||
#define MCLK_DIV4 (4 << 5)
|
||||
#define MCLK_DIV6 (5 << 5)
|
||||
#define MCLK_DIV8 (6 << 5)
|
||||
#define MCLK_DIV12 (7 << 5)
|
||||
#define BCLK_DIV1 (0) // Default value
|
||||
#define BCLK_DIV2 (1 << 2)
|
||||
#define BCLK_DIV4 (2 << 2)
|
||||
#define BCLK_DIV8 (3 << 2)
|
||||
#define BCLK_DIV16 (4 << 2)
|
||||
#define BCLK_DIV32 (5 << 2)
|
||||
#define MS (1)
|
||||
|
||||
// R07 REG_ADDITIONAL
|
||||
#define SR_48KHZ (0) // Default value
|
||||
#define SR_32KHZ (1 << 1)
|
||||
#define SR_24KHZ (2 << 1)
|
||||
#define SR_16KHZ (3 << 1)
|
||||
#define SR_12KHZ (4 << 1)
|
||||
#define SR_8KHZ (5 << 1)
|
||||
#define SLOWCLKEN (1)
|
||||
|
||||
// R08 REG_GPIO
|
||||
#define OPCLK_DIV1 (0) // Default value
|
||||
#define OPCLK_DIV2 (1 << 4)
|
||||
#define OPCLK_DIV3 (2 << 4)
|
||||
#define OPCLK_DIV4 (3 << 4)
|
||||
#define GPIO1POL_NONINVERTED (0) // Default value
|
||||
#define GPIO1POL_INVERTED (1 << 3)
|
||||
#define GPIO1SEL_INPUT (0) // Default value
|
||||
#define GPIO1SEL_TEMP_OK (2)
|
||||
#define GPIO1SEL_AMUTE_ACTIVE (3)
|
||||
#define GPIO1SEL_PLL_CLK_OP (4)
|
||||
#define GPIO1SEL_PLL_LOCK (5)
|
||||
#define GPIO1SEL_LOGIC1 (6)
|
||||
#define GPIO1SEL_LOGIC0 (7)
|
||||
|
||||
// R09 REG_JACK_DETECT1
|
||||
#define JD_VMID_EN1 (1 << 8)
|
||||
#define JD_VMID_EN0 (1 << 7)
|
||||
#define JD_EN (1 << 6)
|
||||
#define JD_SEL_GPIO1 (0 << 4) // Default value
|
||||
#define JD_SEL_GPIO2 (1 << 4)
|
||||
#define JD_SEL_GPIO3 (2 << 4)
|
||||
|
||||
// R10 REG_DAC
|
||||
#define SOFTMUTE (1 << 6)
|
||||
#define DACOSR128 (1 << 3)
|
||||
#define AMUTE (1 << 2)
|
||||
#define DACPOLR (1 << 1)
|
||||
#define DACPOLL (1)
|
||||
|
||||
// R11 & R12 REG_LEFT_DAC_VOL & REG_RIGHT_DAC_VOL
|
||||
#define DACVU (1 << 8)
|
||||
#define DACVOL_POS (0)
|
||||
#define DACVOL_MASK (0xFF)
|
||||
|
||||
// R13 REG_JACK_DETECT2
|
||||
#define JD_OUT4_EN1 (1 << 7)
|
||||
#define JD_OUT3_EN1 (1 << 6)
|
||||
#define JD_OUT2_EN1 (1 << 5)
|
||||
#define JD_OUT1_EN1 (1 << 4)
|
||||
#define JD_OUT4_EN0 (1 << 3)
|
||||
#define JD_OUT3_EN0 (1 << 2)
|
||||
#define JD_OUT2_EN0 (1 << 1)
|
||||
#define JD_OUT1_EN0 (1)
|
||||
|
||||
// R14 REG_ADC
|
||||
#define HPFEN (1 << 8)
|
||||
#define HPFAPP (1 << 7)
|
||||
#define HPFCUT_POS (4)
|
||||
#define HPFCUT_MASK (7)
|
||||
#define HPFCUT_0 (0)
|
||||
#define HPFCUT_1 (1 << 4)
|
||||
#define HPFCUT_2 (2 << 4)
|
||||
#define HPFCUT_3 (3 << 4)
|
||||
#define HPFCUT_4 (4 << 4)
|
||||
#define HPFCUT_5 (5 << 4)
|
||||
#define HPFCUT_6 (6 << 4)
|
||||
#define HPFCUT_7 (7 << 4)
|
||||
#define ADCOSR128 (1 << 3)
|
||||
#define ADCRPOL (1 << 1)
|
||||
#define ADCLPOL (1)
|
||||
|
||||
// R15 & R16 REG_LEFT_ADC_VOL & REG_RIGHT_ADC_VOL
|
||||
#define ADCVU (1 << 8)
|
||||
#define ADCVOL_POS (0)
|
||||
#define ADCVOL_MASK (0xFF)
|
||||
|
||||
// R18 REG_EQ1
|
||||
#define EQ3DMODE_ADC (0)
|
||||
#define EQ3DMODE_DAC (1 << 8) // Default value
|
||||
#define EQ1C_80HZ (0)
|
||||
#define EQ1C_105HZ (1 << 5) // Default value
|
||||
#define EQ1C_135HZ (2 << 5)
|
||||
#define EQ1C_175HZ (3 << 5)
|
||||
|
||||
// R19 REG_EQ2
|
||||
#define EQ2BW_NARROW (0) // Default value
|
||||
#define EQ2BW_WIDE (1 << 8)
|
||||
#define EQ2C_230HZ (0)
|
||||
#define EQ2C_300HZ (1 << 5) // Default value
|
||||
#define EQ2C_385HZ (2 << 5)
|
||||
#define EQ2C_500HZ (3 << 5)
|
||||
|
||||
// R20 REG_EQ3
|
||||
#define EQ3BW_NARROW (0) // Default value
|
||||
#define EQ3BW_WIDE (1 << 8)
|
||||
#define EQ3C_650HZ (0)
|
||||
#define EQ3C_850HZ (1 << 5) // Default value
|
||||
#define EQ3C_1_1KHZ (2 << 5)
|
||||
#define EQ3C_1_4KHZ (3 << 5)
|
||||
|
||||
// R21 REG_EQ4
|
||||
#define EQ4BW_NARROW (0) // Default value
|
||||
#define EQ4BW_WIDE (1 << 8)
|
||||
#define EQ4C_1_8KHZ (0)
|
||||
#define EQ4C_2_4KHZ (1 << 5) // Default value
|
||||
#define EQ4C_3_2KHZ (2 << 5)
|
||||
#define EQ4C_4_1KHZ (3 << 5)
|
||||
|
||||
// R22 REG_EQ5
|
||||
#define EQ5C_5_3KHZ (0)
|
||||
#define EQ5C_6_9KHZ (1 << 5) // Default value
|
||||
#define EQ5C_9KHZ (2 << 5)
|
||||
#define EQ5C_11_7KHZ (3 << 5)
|
||||
|
||||
// R18 - R22
|
||||
#define EQC_POS (5)
|
||||
#define EQC_MASK (3)
|
||||
#define EQG_POS (0)
|
||||
#define EQG_MASK (31)
|
||||
|
||||
// R24 REG_DAC_LIMITER1
|
||||
#define LIMEN (1 << 8)
|
||||
#define LIMDCY_POS (4)
|
||||
#define LIMDCY_MASK (15)
|
||||
#define LIMDCY_750US (0)
|
||||
#define LIMDCY_1_5MS (1 << 4)
|
||||
#define LIMDCY_3MS (2 << 4)
|
||||
#define LIMDCY_6MS (3 << 4) // Default value
|
||||
#define LIMDCY_12MS (4 << 4)
|
||||
#define LIMDCY_24MS (5 << 4)
|
||||
#define LIMDCY_48MS (6 << 4)
|
||||
#define LIMDCY_96MS (7 << 4)
|
||||
#define LIMDCY_192MS (8 << 4)
|
||||
#define LIMDCY_384MS (9 << 4)
|
||||
#define LIMDCY_768MS (10 << 4)
|
||||
#define LIMATK_POS (0)
|
||||
#define LIMATK_MASK (15)
|
||||
#define LIMATK_94US (0)
|
||||
#define LIMATK_188US (1)
|
||||
#define LIMATK_375US (2) // Default value
|
||||
#define LIMATK_750US (3)
|
||||
#define LIMATK_1_5MS (4)
|
||||
#define LIMATK_3MS (5)
|
||||
#define LIMATK_6MS (6)
|
||||
#define LIMATK_12MS (7)
|
||||
#define LIMATK_24MS (8)
|
||||
#define LIMATK_48MS (9)
|
||||
#define LIMATK_96MS (10)
|
||||
#define LIMATK_192MS (11)
|
||||
|
||||
// R25 REG_DAC_LIMITER2
|
||||
#define LIMLVL_POS (4)
|
||||
#define LIMLVL_MASK (7)
|
||||
#define LIMLVL_N1DB (0) // Default value
|
||||
#define LIMLVL_N2DB (1 << 4)
|
||||
#define LIMLVL_N3DB (2 << 4)
|
||||
#define LIMLVL_N4DB (3 << 4)
|
||||
#define LIMLVL_N5DB (4 << 4)
|
||||
#define LIMLVL_N6DB (5 << 4)
|
||||
#define LIMBOOST_POS (0)
|
||||
#define LIMBOOST_MASK (15)
|
||||
#define LIMBOOST_0DB (0)
|
||||
#define LIMBOOST_1DB (1)
|
||||
#define LIMBOOST_2DB (2)
|
||||
#define LIMBOOST_3DB (3)
|
||||
#define LIMBOOST_4DB (4)
|
||||
#define LIMBOOST_5DB (5)
|
||||
#define LIMBOOST_6DB (6)
|
||||
#define LIMBOOST_7DB (7)
|
||||
#define LIMBOOST_8DB (8)
|
||||
#define LIMBOOST_9DB (9)
|
||||
#define LIMBOOST_10DB (10)
|
||||
#define LIMBOOST_11DB (11)
|
||||
#define LIMBOOST_12DB (12)
|
||||
|
||||
// R27 - R30 REG_NOTCH_FILTER1 - REG_NOTCH_FILTER4
|
||||
#define NFU (1 << 8)
|
||||
#define NFEN (1 << 7)
|
||||
#define NFA_POS (0)
|
||||
#define NFA_MASK (127)
|
||||
|
||||
// R32 REG_ALC1
|
||||
#define ALCSEL_OFF (0) // Default value
|
||||
#define ALCSEL_RIGHT_ONLY (1 << 7)
|
||||
#define ALCSEL_LEFT_ONLY (2 << 7)
|
||||
#define ALCSEL_BOTH_ON (3 << 7)
|
||||
#define ALCMAXGAIN_POS (3)
|
||||
#define ALCMAXGAIN_MASK (7)
|
||||
#define ALCMAXGAIN_N6_75DB (0)
|
||||
#define ALCMAXGAIN_N0_75DB (1 << 3)
|
||||
#define ALCMAXGAIN_5_25DB (2 << 3)
|
||||
#define ALCMAXGAIN_11_25DB (3 << 3)
|
||||
#define ALCMAXGAIN_17_25DB (4 << 3)
|
||||
#define ALCMAXGAIN_23_25DB (5 << 3)
|
||||
#define ALCMAXGAIN_29_25DB (6 << 3)
|
||||
#define ALCMAXGAIN_35_25DB (7 << 3) // Default value
|
||||
#define ALCMINGAIN_POS (0)
|
||||
#define ALCMINGAIN_MASK (7)
|
||||
#define ALCMINGAIN_N12DB (0) // Default value
|
||||
#define ALCMINGAIN_N6DB (1)
|
||||
#define ALCMINGAIN_0DB (2)
|
||||
#define ALCMINGAIN_6DB (3)
|
||||
#define ALCMINGAIN_12DB (4)
|
||||
#define ALCMINGAIN_18DB (5)
|
||||
#define ALCMINGAIN_24DB (6)
|
||||
#define ALCMINGAIN_30DB (7)
|
||||
|
||||
// R33 REG_ALC2
|
||||
#define ALCHLD_POS (4)
|
||||
#define ALCHLD_MASK (15)
|
||||
#define ALCHLD_0MS (0) // Default value
|
||||
#define ALCHLD_2_67MS (1 << 4)
|
||||
#define ALCHLD_5_33MS (2 << 4)
|
||||
#define ALCHLD_10_67MS (3 << 4)
|
||||
#define ALCHLD_21_33MS (4 << 4)
|
||||
#define ALCHLD_42_67MS (5 << 4)
|
||||
#define ALCHLD_85_33MS (6 << 4)
|
||||
#define ALCHLD_170_67MS (7 << 4)
|
||||
#define ALCHLD_341_33MS (8 << 4)
|
||||
#define ALCHLD_682_67MS (9 << 4)
|
||||
#define ALCHLD_1_36S (10 << 4)
|
||||
#define ALCLVL_POS (0)
|
||||
#define ALCLVL_MASK (15)
|
||||
#define ALCLVL_N22_5DBFS (0)
|
||||
#define ALCLVL_N21DBFS (1)
|
||||
#define ALCLVL_N19_5DBFS (2)
|
||||
#define ALCLVL_N18DBFS (3)
|
||||
#define ALCLVL_N16_5DBFS (4)
|
||||
#define ALCLVL_N15DBFS (5)
|
||||
#define ALCLVL_N13_5DBFS (6)
|
||||
#define ALCLVL_N12DBFS (7)
|
||||
#define ALCLVL_N10_5DBFS (8)
|
||||
#define ALCLVL_N9DBFS (9)
|
||||
#define ALCLVL_N7_5DBFS (10)
|
||||
#define ALCLVL_N6DBFS (11) // Default value
|
||||
#define ALCLVL_N4_5DBFS (12)
|
||||
#define ALCLVL_N3DBFS (13)
|
||||
#define ALCLVL_N1_5DBFS (14)
|
||||
|
||||
// R34 REG_ALC3
|
||||
#define ALCMODE_ALC (0) // Default value
|
||||
#define ALCMODE_LIMITER (1 << 8)
|
||||
#define ALCDCY_POS (4)
|
||||
#define ALCDCY_MASK (15)
|
||||
#define ALCDCY_0 (0)
|
||||
#define ALCDCY_1 (1 << 4)
|
||||
#define ALCDCY_2 (2 << 4)
|
||||
#define ALCDCY_3 (3 << 4) // Default value
|
||||
#define ALCDCY_4 (4 << 4)
|
||||
#define ALCDCY_5 (5 << 4)
|
||||
#define ALCDCY_6 (6 << 4)
|
||||
#define ALCDCY_7 (7 << 4)
|
||||
#define ALCDCY_8 (8 << 4)
|
||||
#define ALCDCY_9 (9 << 4)
|
||||
#define ALCDCY_10 (10 << 4)
|
||||
#define ALCATK_POS (0)
|
||||
#define ALCATK_MASK (15)
|
||||
#define ALCATK_0 (0)
|
||||
#define ALCATK_1 (1)
|
||||
#define ALCATK_2 (2) // Default value
|
||||
#define ALCATK_3 (3)
|
||||
#define ALCATK_4 (4)
|
||||
#define ALCATK_5 (5)
|
||||
#define ALCATK_6 (6)
|
||||
#define ALCATK_7 (7)
|
||||
#define ALCATK_8 (8)
|
||||
#define ALCATK_9 (9)
|
||||
#define ALCATK_10 (10)
|
||||
|
||||
// R35 REG_NOISE_GATE
|
||||
#define NGEN (1 << 3)
|
||||
#define NGTH_POS (0)
|
||||
#define NGTH_MASK (7)
|
||||
#define NGTH_N39DB (0) // Default value
|
||||
#define NGTH_N45DB (1)
|
||||
#define NGTH_N51DB (2)
|
||||
#define NGTH_N57DB (3)
|
||||
#define NGTH_N63DB (4)
|
||||
#define NGTH_N69DB (5)
|
||||
#define NGTH_N75DB (6)
|
||||
#define NGTH_N81DB (7)
|
||||
|
||||
// R36 REG_PLL_N
|
||||
#define PLLPRESCALE (1 << 4)
|
||||
#define PLLN_POS (0)
|
||||
#define PLLN_MASK (15)
|
||||
|
||||
// R37 - R39 REG_PLL_K1 - REG_PLL_K3
|
||||
#define PLLK1_POS (0)
|
||||
#define PLLK1_MASK (63)
|
||||
#define PLLK2_POS (0)
|
||||
#define PLLK2_MASK (511)
|
||||
#define PLLK3_POS (0)
|
||||
#define PLLK3_MASK (511)
|
||||
|
||||
// R41 REG_3D
|
||||
#define DEPTH3D_POS (0)
|
||||
#define DEPTH3D_MASK (15)
|
||||
#define DEPTH3D_0 (0) // Default value
|
||||
#define DEPTH3D_6_67 (1)
|
||||
#define DEPTH3D_13_33 (2)
|
||||
#define DEPTH3D_20 (3)
|
||||
#define DEPTH3D_26_67 (4)
|
||||
#define DEPTH3D_33_33 (5)
|
||||
#define DEPTH3D_40 (6)
|
||||
#define DEPTH3D_46_67 (7)
|
||||
#define DEPTH3D_53_33 (8)
|
||||
#define DEPTH3D_60 (9)
|
||||
#define DEPTH3D_66_67 (10)
|
||||
#define DEPTH3D_73_33 (11)
|
||||
#define DEPTH3D_80 (12)
|
||||
#define DEPTH3D_86_67 (13)
|
||||
#define DEPTH3D_93_33 (14)
|
||||
#define DEPTH3D_100 (15)
|
||||
|
||||
// R43 REG_BEEP
|
||||
#define MUTERPGA2INV (1 << 5)
|
||||
#define INVROUT2 (1 << 4)
|
||||
#define BEEPVOL_POS (1)
|
||||
#define BEEPVOL_MASK (7)
|
||||
#define BEEPVOL_N15DB (0)
|
||||
#define BEEPVOL_N12DB (1 << 1)
|
||||
#define BEEPVOL_N9DB (2 << 1)
|
||||
#define BEEPVOL_N6DB (3 << 1)
|
||||
#define BEEPVOL_N3DB (4 << 1)
|
||||
#define BEEPVOL_0DB (5 << 1)
|
||||
#define BEEPVOL_3DB (6 << 1)
|
||||
#define BEEPVOL_6DB (7 << 1)
|
||||
#define BEEPEN (1)
|
||||
|
||||
// R44 REG_INPUT
|
||||
#define MBVSEL_0_9AVDD (0) // Default value
|
||||
#define MBVSEL_0_65AVDD (1 << 8)
|
||||
#define R2_2INPVGA (1 << 6)
|
||||
#define RIN2INPVGA (1 << 5) // Default value
|
||||
#define RIP2INPVGA (1 << 4) // Default value
|
||||
#define L2_2INPVGA (1 << 2)
|
||||
#define LIN2INPVGA (1 << 1) // Default value
|
||||
#define LIP2INPVGA (1) // Default value
|
||||
|
||||
// R45 REG_LEFT_PGA_GAIN
|
||||
#define INPPGAUPDATE (1 << 8)
|
||||
#define INPPGAZCL (1 << 7)
|
||||
#define INPPGAMUTEL (1 << 6)
|
||||
|
||||
// R46 REG_RIGHT_PGA_GAIN
|
||||
#define INPPGAZCR (1 << 7)
|
||||
#define INPPGAMUTER (1 << 6)
|
||||
|
||||
// R45 - R46
|
||||
#define INPPGAVOL_POS (0)
|
||||
#define INPPGAVOL_MASK (63)
|
||||
|
||||
// R47 REG_LEFT_ADC_BOOST
|
||||
#define PGABOOSTL (1 << 8) // Default value
|
||||
#define L2_2BOOSTVOL_POS (4)
|
||||
#define L2_2BOOSTVOL_MASK (7)
|
||||
#define L2_2BOOSTVOL_DISABLED (0) // Default value
|
||||
#define L2_2BOOSTVOL_N12DB (1 << 4)
|
||||
#define L2_2BOOSTVOL_N9DB (2 << 4)
|
||||
#define L2_2BOOSTVOL_N6DB (3 << 4)
|
||||
#define L2_2BOOSTVOL_N3DB (4 << 4)
|
||||
#define L2_2BOOSTVOL_0DB (5 << 4)
|
||||
#define L2_2BOOSTVOL_3DB (6 << 4)
|
||||
#define L2_2BOOSTVOL_6DB (7 << 4)
|
||||
#define AUXL2BOOSTVOL_POS (0)
|
||||
#define AUXL2BOOSTVOL_MASK (7)
|
||||
#define AUXL2BOOSTVOL_DISABLED (0) // Default value
|
||||
#define AUXL2BOOSTVOL_N12DB (1)
|
||||
#define AUXL2BOOSTVOL_N9DB (2)
|
||||
#define AUXL2BOOSTVOL_N6DB (3)
|
||||
#define AUXL2BOOSTVOL_N3DB (4)
|
||||
#define AUXL2BOOSTVOL_0DB (5)
|
||||
#define AUXL2BOOSTVOL_3DB (6)
|
||||
#define AUXL2BOOSTVOL_6DB (7)
|
||||
|
||||
// R48 REG_RIGHT_ADC_BOOST
|
||||
#define PGABOOSTR (1 << 8) // Default value
|
||||
#define R2_2BOOSTVOL_POS (4)
|
||||
#define R2_2BOOSTVOL_MASK (7)
|
||||
#define R2_2BOOSTVOL_DISABLED (0) // Default value
|
||||
#define R2_2BOOSTVOL_N12DB (1 << 4)
|
||||
#define R2_2BOOSTVOL_N9DB (2 << 4)
|
||||
#define R2_2BOOSTVOL_N6DB (3 << 4)
|
||||
#define R2_2BOOSTVOL_N3DB (4 << 4)
|
||||
#define R2_2BOOSTVOL_0DB (5 << 4)
|
||||
#define R2_2BOOSTVOL_3DB (6 << 4)
|
||||
#define R2_2BOOSTVOL_6DB (7 << 4)
|
||||
#define AUXR2BOOSTVOL_POS (0)
|
||||
#define AUXR2BOOSTVOL_MASK (7)
|
||||
#define AUXR2BOOSTVOL_DISABLED (0) // Default value
|
||||
#define AUXR2BOOSTVOL_N12DB (1)
|
||||
#define AUXR2BOOSTVOL_N9DB (2)
|
||||
#define AUXR2BOOSTVOL_N6DB (3)
|
||||
#define AUXR2BOOSTVOL_N3DB (4)
|
||||
#define AUXR2BOOSTVOL_0DB (5)
|
||||
#define AUXR2BOOSTVOL_3DB (6)
|
||||
#define AUXR2BOOSTVOL_6DB (7)
|
||||
|
||||
// R49 REG_OUTPUT
|
||||
#define DACL2RMIX (1 << 6)
|
||||
#define DACR2LMIX (1 << 5)
|
||||
#define OUT4BOOST (1 << 4)
|
||||
#define OUT3BOOST (1 << 3)
|
||||
#define SPKBOOST (1 << 2)
|
||||
#define TSDEN (1 << 1)
|
||||
#define VROI (1)
|
||||
|
||||
// R50 REG_LEFT_MIXER
|
||||
#define AUXLMIXVOL_POS (6)
|
||||
#define AUXLMIXVOL_MASK (7)
|
||||
#define AUXLMIXVOL_N15DB (0) // Default value
|
||||
#define AUXLMIXVOL_N12DB (1 << 6)
|
||||
#define AUXLMIXVOL_N9DB (2 << 6)
|
||||
#define AUXLMIXVOL_N6DB (3 << 6)
|
||||
#define AUXLMIXVOL_N3DB (4 << 6)
|
||||
#define AUXLMIXVOL_0DB (5 << 6)
|
||||
#define AUXLMIXVOL_3DB (6 << 6)
|
||||
#define AUXLMIXVOL_6DB (7 << 6)
|
||||
#define AUXL2LMIX (1 << 5)
|
||||
#define BYPLMIXVOL_POS (2)
|
||||
#define BYPLMIXVOL_MASK (7)
|
||||
#define BYPLMIXVOL_N15DB (0) // Default value
|
||||
#define BYPLMIXVOL_N12DB (1 << 2)
|
||||
#define BYPLMIXVOL_N9DB (2 << 2)
|
||||
#define BYPLMIXVOL_N6DB (3 << 2)
|
||||
#define BYPLMIXVOL_N3DB (4 << 2)
|
||||
#define BYPLMIXVOL_0DB (5 << 2)
|
||||
#define BYPLMIXVOL_3DB (6 << 2)
|
||||
#define BYPLMIXVOL_6DB (7 << 2)
|
||||
#define BYPL2LMIX (1 << 1)
|
||||
#define DACL2LMIX (1)
|
||||
|
||||
// R51 REG_RIGHT_MIXER
|
||||
#define AUXRMIXVOL_POS (6)
|
||||
#define AUXRMIXVOL_MASK (7)
|
||||
#define AUXRMIXVOL_N15DB (0) // Default value
|
||||
#define AUXRMIXVOL_N12DB (1 << 6)
|
||||
#define AUXRMIXVOL_N9DB (2 << 6)
|
||||
#define AUXRMIXVOL_N6DB (3 << 6)
|
||||
#define AUXRMIXVOL_N3DB (4 << 6)
|
||||
#define AUXRMIXVOL_0DB (5 << 6)
|
||||
#define AUXRMIXVOL_3DB (6 << 6)
|
||||
#define AUXRMIXVOL_6DB (7 << 6)
|
||||
#define AUXR2RMIX (1 << 5)
|
||||
#define BYPRMIXVOL_POS (2)
|
||||
#define BYPRMIXVOL_MASK (7)
|
||||
#define BYPRMIXVOL_N15DB (0) // Default value
|
||||
#define BYPRMIXVOL_N12DB (1 << 2)
|
||||
#define BYPRMIXVOL_N9DB (2 << 2)
|
||||
#define BYPRMIXVOL_N6DB (3 << 2)
|
||||
#define BYPRMIXVOL_N3DB (4 << 2)
|
||||
#define BYPRMIXVOL_0DB (5 << 2)
|
||||
#define BYPRMIXVOL_3DB (6 << 2)
|
||||
#define BYPRMIXVOL_6DB (7 << 2)
|
||||
#define BYPR2RMIX (1 << 1)
|
||||
#define DACR2RMIX (1)
|
||||
|
||||
// R52 - R55 REG_LOUT1_VOL - REG_ROUT2_VOL
|
||||
#define HPVU (1 << 8)
|
||||
#define SPKVU (1 << 8)
|
||||
#define LOUT1ZC (1 << 7)
|
||||
#define LOUT1MUTE (1 << 6)
|
||||
#define ROUT1ZC (1 << 7)
|
||||
#define ROUT1MUTE (1 << 6)
|
||||
#define LOUT2ZC (1 << 7)
|
||||
#define LOUT2MUTE (1 << 6)
|
||||
#define ROUT2ZC (1 << 7)
|
||||
#define ROUT2MUTE (1 << 6)
|
||||
#define VOL_POS (0)
|
||||
#define VOL_MASK (63)
|
||||
|
||||
// R56 REG_OUT3_MIXER
|
||||
#define OUT3MUTE (1 << 6)
|
||||
#define OUT4_2OUT3 (1 << 3)
|
||||
#define BYPL2OUT3 (1 << 2)
|
||||
#define LMIX2OUT3 (1 << 1)
|
||||
#define LDAC2OUT3 (1)
|
||||
|
||||
// R57 REG_OUT4_MIXER
|
||||
#define OUT4MUTE (1 << 6)
|
||||
#define HALFSIG (1 << 5)
|
||||
#define LMIX2OUT4 (1 << 4)
|
||||
#define LDAC2OUT4 (1 << 3)
|
||||
#define BYPR2OUT4 (1 << 2)
|
||||
#define RMIX2OUT4 (1 << 1)
|
||||
#define RDAC2OUT4 (1)
|
||||
|
||||
#endif // #ifndef __CODEC_H__
|
||||
|
|
@ -44,8 +44,8 @@ extern void finsh_system_init(void);
|
|||
extern void finsh_set_device(const char* device);
|
||||
#endif
|
||||
extern int rt_application_init(void);
|
||||
extern rt_err_t wm8753_hw_init(void);
|
||||
extern rt_err_t wm8978_hw_init(void);
|
||||
extern rt_err_t codec_hw_init(void);
|
||||
extern rt_err_t codec_hw_init(void);
|
||||
#ifdef DEBUG
|
||||
/*******************************************************************************
|
||||
* Function Name : assert_failed
|
||||
|
|
@ -104,11 +104,7 @@ void rtthread_startup(void)
|
|||
/* init scheduler system */
|
||||
rt_system_scheduler_init();
|
||||
|
||||
#if CODEC_VERSION == 1
|
||||
wm8753_hw_init();
|
||||
#elif CODEC_VERSION == 2
|
||||
wm8978_hw_init();
|
||||
#endif
|
||||
codec_hw_init();
|
||||
|
||||
/* init hardware serial device */
|
||||
rt_hw_usart_init();
|
||||
|
|
|
|||
|
|
@ -365,7 +365,7 @@ void DMA1_Channel4_IRQHandler(void)
|
|||
*******************************************************************************/
|
||||
void DMA1_Channel5_IRQHandler(void)
|
||||
{
|
||||
extern void wm8753_dma_isr(void);
|
||||
extern void codec_dma_isr(void);
|
||||
|
||||
/* enter interrupt */
|
||||
rt_interrupt_enter();
|
||||
|
|
@ -377,7 +377,7 @@ void DMA1_Channel5_IRQHandler(void)
|
|||
|
||||
// rt_kprintf("DMA\n");
|
||||
/* transmission complete, invoke serial dma tx isr */
|
||||
wm8753_dma_isr();
|
||||
codec_dma_isr();
|
||||
}
|
||||
|
||||
/* leave interrupt */
|
||||
|
|
@ -446,12 +446,12 @@ void EXTI9_5_IRQHandler(void)
|
|||
*******************************************************************************/
|
||||
void SPI2_IRQHandler(void)
|
||||
{
|
||||
extern void wm8753_isr(void);
|
||||
extern void codec_isr(void);
|
||||
|
||||
/* enter interrupt */
|
||||
rt_interrupt_enter();
|
||||
|
||||
wm8753_isr();
|
||||
codec_isr();
|
||||
|
||||
/* leave interrupt */
|
||||
rt_interrupt_leave();
|
||||
|
|
|
|||
Loading…
Reference in New Issue