[Bsp] add sdcard drive | 添加sd卡驱动

bsp/stm32f10x-HAL/Kconfig

@@ -182,3 +182,16 @@ if RT_USING_SPI
         default n
 endif
 
+if RT_USING_DEVICE_IPC && (STM32F103RC || STM32F103RD || STM32F103RE || STM32F103RF || STM32F103RG ||STM32F103VC || STM32F103VD || STM32F103VE || STM32F103VF || STM32F103VG ||STM32F103ZC || STM32F103ZD || STM32F103ZE || STM32F103ZF || STM32F103ZG)
+    config RT_USING_SDCARD
+        bool "Using sdcard with sdio"
+        default n
+    config USING_SD_RX_DMA
+        bool "SDCARD Rx Using Dma Mode"
+        default y  
+        depends on RT_USING_SDCARD
+    config USING_SD_TX_DMA
+        bool "SDCARD Tx Using Dma Mode"
+        default n  
+        depends on RT_USING_SDCARD
+endif

bsp/stm32f10x-HAL/drivers/SConscript

@@ -18,8 +18,8 @@ if GetDepend(['RT_USING_SPI']):
     src += ['drv_spi.c']
 if GetDepend(['RT_USING_USB_DEVICE']):
     src += ['drv_usb.c']
-
+if GetDepend(['RT_USING_SDCARD']):
-
+    src += ['drv_sdcard.c']
     
 CPPPATH = [cwd]
 

bsp/stm32f10x-HAL/drivers/drv_sdcard.c

@@ -0,0 +1,324 @@
+/*
+ * File      : drv_sdcard.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2018-01-13     Liu2guang      the first version.
+ */
+#include <rtthread.h>  
+#include <rtdevice.h> 
+#include "board.h"
+#include "drv_sdcard.h"
+
+#ifndef SDIO_CLK_DIV
+#define SDIO_CLK_DIV 2
+#endif
+
+#define SDIO_TIMEOUT ((uint32_t)0x100000)
+
+static SD_HandleTypeDef hsdcard; 
+static DMA_HandleTypeDef hdma;
+static struct rt_semaphore sd_lock;
+
+void SDIO_IRQHandler(void)
+{
+    rt_interrupt_enter();
+    HAL_SD_IRQHandler(&hsdcard);
+    rt_interrupt_leave();
+}
+
+#if defined(USING_SD_RX_DMA) || defined(USING_SD_TX_DMA) 
+void DMA2_Channel4_5_IRQHandler(void)
+{
+    rt_interrupt_enter();
+    HAL_DMA_IRQHandler(&hdma); 
+    rt_interrupt_leave();
+}
+#endif
+
+rt_err_t stm32_read_blocks(uint32_t *data, uint32_t addr, uint32_t num)
+{
+    uint32_t timeout = 0;
+    HAL_SD_StateTypeDef state_return;
+    HAL_SD_CardStateTypeDef sd_card_state_return;
+    
+#if defined(USING_SD_RX_DMA) && defined(USING_SD_TX_DMA) 
+    hdma.Init.Direction = DMA_PERIPH_TO_MEMORY;
+    hdma.Init.PeriphInc = DMA_PINC_DISABLE; 
+    hdma.Init.MemInc    = DMA_MINC_ENABLE; 
+    HAL_DMA_DeInit(&hdma);
+    HAL_DMA_Init(&hdma); 
+#endif
+
+#if defined(USING_SD_RX_DMA)
+    if(HAL_SD_ReadBlocks_DMA(&hsdcard, (uint8_t *)data, addr, num) != HAL_OK)
+#else
+    if(HAL_SD_ReadBlocks(&hsdcard, (uint8_t *)data, addr, num, SDIO_TIMEOUT) != HAL_OK)
+#endif
+    {
+        return RT_EIO;
+    }
+    
+    do
+    {
+        state_return = HAL_SD_GetState(&hsdcard);
+        timeout++;
+    }while((HAL_SD_STATE_BUSY == state_return) && (SDIO_TIMEOUT > timeout));
+    
+    if(HAL_SD_STATE_READY != state_return)
+    {
+        return RT_ERROR; 
+    }
+    
+    do
+    {
+        sd_card_state_return = HAL_SD_GetCardState(&hsdcard);
+        timeout++;
+    }while((HAL_SD_CARD_TRANSFER != sd_card_state_return) && (SDIO_TIMEOUT > timeout));
+    
+    if(SDIO_TIMEOUT <= timeout)
+    {
+        return RT_ETIMEOUT; 
+    }
+
+    return RT_EOK; 
+}
+
+rt_err_t stm32_write_blocks(uint32_t *data, uint32_t addr, uint32_t num)
+{
+    uint32_t timeout = 0;
+    HAL_SD_StateTypeDef state_return;
+    HAL_SD_CardStateTypeDef sd_card_state_return;
+    
+#if defined(USING_SD_RX_DMA) && defined(USING_SD_TX_DMA) 
+    hdma.Init.Direction = DMA_MEMORY_TO_PERIPH;
+    hdma.Init.PeriphInc = DMA_MINC_ENABLE; 
+    hdma.Init.MemInc    = DMA_PINC_DISABLE; 
+    HAL_DMA_DeInit(&hdma);
+    HAL_DMA_Init(&hdma); 
+#endif
+    
+#if defined(USING_SD_TX_DMA)
+    if(HAL_SD_WriteBlocks_DMA(&hsdcard, (uint8_t *)data, addr, num) != HAL_OK)
+#else
+    if(HAL_SD_WriteBlocks(&hsdcard, (uint8_t *)data, addr, num, SDIO_TIMEOUT) != HAL_OK)
+#endif
+    {
+        return RT_ERROR;
+    }
+    
+    do
+    {
+        state_return = HAL_SD_GetState(&hsdcard);
+        timeout++;
+    }while((HAL_SD_STATE_BUSY == state_return) && (SDIO_TIMEOUT > timeout));
+    
+    if(HAL_SD_STATE_READY != state_return)
+    {
+        return RT_ERROR; 
+    }
+    
+    do
+    {
+        sd_card_state_return = HAL_SD_GetCardState(&hsdcard);
+        timeout++;
+    }while((HAL_SD_CARD_TRANSFER != sd_card_state_return) && (SDIO_TIMEOUT > timeout));
+    
+    if(SDIO_TIMEOUT <= timeout)
+    {
+        return RT_ETIMEOUT; 
+    }
+    
+    return RT_EOK; 
+}
+
+static rt_err_t stm32_sdcard_init(rt_device_t dev)
+{
+    GPIO_InitTypeDef GPIO_InitStruct;
+    
+    if(rt_sem_init(&sd_lock, "sdlock", 1, RT_IPC_FLAG_FIFO) != RT_EOK)
+    {
+        return RT_ERROR;
+    }
+    
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    
+    GPIO_InitStruct.Pin   = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | 
+                            GPIO_PIN_12;
+    GPIO_InitStruct.Mode  = GPIO_MODE_AF_PP; 
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; 
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); 
+    
+    GPIO_InitStruct.Pin   = GPIO_PIN_2;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+    
+#if defined(USING_SD_RX_DMA) || defined(USING_SD_TX_DMA) 
+    __HAL_RCC_DMA2_CLK_ENABLE();
+
+    hdma.Instance                 = DMA2_Channel4; 
+    hdma.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD; 
+    hdma.Init.MemDataAlignment    = DMA_MDATAALIGN_WORD; 
+    hdma.Init.Mode                = DMA_NORMAL; 
+    hdma.Init.Priority            = DMA_PRIORITY_HIGH; 
+    
+#if defined(USING_SD_RX_DMA)
+    hdma.Init.Direction           = DMA_PERIPH_TO_MEMORY; 
+    hdma.Init.PeriphInc           = DMA_PINC_DISABLE; 
+    hdma.Init.MemInc              = DMA_MINC_ENABLE; 
+    __HAL_LINKDMA(&hsdcard, hdmarx, hdma); 
+#endif
+
+#if defined(USING_SD_TX_DMA)
+    hdma.Init.Direction           = DMA_MEMORY_TO_PERIPH;
+    hdma.Init.PeriphInc           = DMA_MINC_ENABLE;
+    hdma.Init.MemInc              = DMA_PINC_DISABLE; 
+    __HAL_LINKDMA(&hsdcard, hdmatx, hdma); 
+#endif
+    
+    HAL_DMA_DeInit(&hdma);
+    if(HAL_DMA_Init(&hdma) != HAL_OK)
+    {
+        rt_kprintf("HAL_DMA_Init error\n");
+        return RT_EIO;
+    }
+#endif
+    
+    HAL_NVIC_SetPriority(DMA2_Channel4_5_IRQn, 3, 0);
+    HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn); 
+    
+    __HAL_RCC_SDIO_CLK_ENABLE(); 
+    
+    hsdcard.Instance                 = SDIO; 
+    hsdcard.Init.ClockEdge           = SDIO_CLOCK_EDGE_RISING; 
+    hsdcard.Init.ClockBypass         = SDIO_CLOCK_BYPASS_DISABLE;
+    hsdcard.Init.ClockPowerSave      = SDIO_CLOCK_POWER_SAVE_DISABLE;
+    hsdcard.Init.BusWide             = SDIO_BUS_WIDE_1B;
+    hsdcard.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_ENABLE;
+    hsdcard.Init.ClockDiv            = SDIO_CLK_DIV; 
+    
+    HAL_SD_DeInit(&hsdcard);
+    if(HAL_SD_Init(&hsdcard) != HAL_OK)
+    {
+        rt_kprintf("HAL_SD_Init error\n");
+        return RT_EIO; 
+    }
+    
+    HAL_NVIC_SetPriority(SDIO_IRQn, 1, 0);
+    HAL_NVIC_EnableIRQ(SDIO_IRQn);
+    
+    if(HAL_SD_ConfigWideBusOperation(&hsdcard, SDIO_BUS_WIDE_4B) != HAL_OK) 
+    {
+        rt_kprintf("HAL_SD_ConfigWideBusOperation error\n");
+        return RT_EIO;
+    }
+    
+    return RT_EOK; 
+}
+
+static rt_err_t stm32_sdcard_open(rt_device_t dev, rt_uint16_t oflag)
+{
+    return RT_EOK; 
+}
+
+static rt_err_t stm32_sdcard_close(rt_device_t dev) 
+{
+    return RT_EOK; 
+} 
+
+static rt_size_t stm32_sdcard_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
+{
+    int ret = RT_EOK; 
+    
+    rt_sem_take(&sd_lock, RT_WAITING_FOREVER);
+    ret = stm32_read_blocks((uint32_t *)buffer, pos, size); 
+    rt_sem_release(&sd_lock);
+    
+    if(ret != RT_EOK)
+    {
+        return 0; 
+    }
+    
+    return size; 
+} 
+
+static rt_size_t stm32_sdcard_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
+{
+    int ret = RT_EOK;
+    
+    rt_sem_take(&sd_lock, RT_WAITING_FOREVER);
+    ret = stm32_write_blocks((uint32_t *)buffer, pos, size); 
+    rt_sem_release(&sd_lock);
+    
+    if(ret != RT_EOK)
+    {
+        return 0; 
+    }
+    
+    return size; 
+} 
+
+static rt_err_t stm32_sdcard_control(rt_device_t dev, int cmd, void *args)
+{
+    RT_ASSERT(dev != RT_NULL);
+    
+    // RT_DEVICE_CTRL_BLK_GETGEOME 
+    if(cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
+    {
+        HAL_SD_CardInfoTypeDef sdcard_info;
+        struct rt_device_blk_geometry *geometry;
+        
+        HAL_SD_GetCardInfo(&hsdcard, &sdcard_info);
+        
+        geometry = (struct rt_device_blk_geometry *)args;
+
+        geometry->bytes_per_sector = sdcard_info.BlockSize;
+        geometry->block_size       = sdcard_info.BlockSize;
+        geometry->sector_count     = sdcard_info.BlockNbr;
+    }
+
+    return RT_EOK;
+} 
+
+static struct rt_device device; 
+
+int rt_hw_sdcard_init(void)
+{
+    rt_err_t ret = RT_EOK; 
+
+    device.type    = RT_Device_Class_Block;
+    device.init    = stm32_sdcard_init;
+    device.open    = stm32_sdcard_open; 
+    device.read    = stm32_sdcard_read;
+    device.write   = stm32_sdcard_write;
+    device.control = stm32_sdcard_control;
+    device.close   = stm32_sdcard_close;
+    
+    ret = rt_device_register(&device, "sd0", 
+                             RT_DEVICE_FLAG_REMOVABLE | 
+                             RT_DEVICE_FLAG_RDWR      | 
+                             RT_DEVICE_FLAG_STANDALONE); 
+    if(ret != RT_EOK)
+    {
+        return ret; 
+    }
+    
+    return RT_EOK; 
+}
+INIT_DEVICE_EXPORT(rt_hw_sdcard_init); 

bsp/stm32f10x-HAL/drivers/drv_sdcard.h

@@ -0,0 +1,30 @@
+/*
+ * File      : drv_sdcard.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author         Notes
+ * 2018-01-13     Liu2guang      the first version.
+ */
+
+#ifndef __DRV_SDCARD_H_ 
+#define __DRV_SDCARD_H_ 
+
+int rt_hw_sdcard_init(void); 
+
+#endif

bsp/stm32f10x-HAL/drivers/stm32f1xx_hal_conf.h

@@ -80,7 +80,9 @@
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
 // #define HAL_RTC_MODULE_ENABLED
-// #define HAL_SD_MODULE_ENABLED
+#ifdef RT_USING_SDCARD 
+  #define HAL_SD_MODULE_ENABLED
+#endif
 // #define HAL_SMARTCARD_MODULE_ENABLED
 #ifdef RT_USING_SPI
   #define HAL_SPI_MODULE_ENABLED