Add pcap driver(for win32) in simulator porting.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2391 bbd45198-f89e-11dd-88c7-29a3b14d5316
This commit is contained in:
parent
eda62844c1
commit
67f60b770c
|
@ -20,6 +20,11 @@
|
||||||
|
|
||||||
void rt_init_thread_entry(void* parameter)
|
void rt_init_thread_entry(void* parameter)
|
||||||
{
|
{
|
||||||
|
#ifdef RT_USING_LWIP
|
||||||
|
extern void pcap_netif_hw_init(void);
|
||||||
|
pcap_netif_hw_init();
|
||||||
|
#endif
|
||||||
|
|
||||||
/* initialization RT-Thread Components */
|
/* initialization RT-Thread Components */
|
||||||
rt_components_init();
|
rt_components_init();
|
||||||
|
|
||||||
|
|
|
@ -0,0 +1,359 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy)
|
||||||
|
* Copyright (c) 2005 - 2007 CACE Technologies, Davis (California)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Politecnico di Torino, CACE Technologies
|
||||||
|
* nor the names of its contributors may be used to endorse or promote
|
||||||
|
* products derived from this software without specific prior written
|
||||||
|
* permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @ingroup packetapi
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup packet32h Packet.dll definitions and data structures
|
||||||
|
* Packet32.h contains the data structures and the definitions used by packet.dll.
|
||||||
|
* The file is used both by the Win9x and the WinNTx versions of packet.dll, and can be included
|
||||||
|
* by the applications that use the functions of this library
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __PACKET32
|
||||||
|
#define __PACKET32
|
||||||
|
|
||||||
|
#include <winsock2.h>
|
||||||
|
|
||||||
|
#ifdef HAVE_AIRPCAP_API
|
||||||
|
#include <airpcap.h>
|
||||||
|
#else
|
||||||
|
#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_)
|
||||||
|
#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_
|
||||||
|
typedef struct _AirpcapHandle *PAirpcapHandle;
|
||||||
|
#endif /* AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ */
|
||||||
|
#endif /* HAVE_AIRPCAP_API */
|
||||||
|
|
||||||
|
#ifdef HAVE_DAG_API
|
||||||
|
#include <dagc.h>
|
||||||
|
#endif /* HAVE_DAG_API */
|
||||||
|
|
||||||
|
// Working modes
|
||||||
|
#define PACKET_MODE_CAPT 0x0 ///< Capture mode
|
||||||
|
#define PACKET_MODE_STAT 0x1 ///< Statistical mode
|
||||||
|
#define PACKET_MODE_MON 0x2 ///< Monitoring mode
|
||||||
|
#define PACKET_MODE_DUMP 0x10 ///< Dump mode
|
||||||
|
#define PACKET_MODE_STAT_DUMP MODE_DUMP | MODE_STAT ///< Statistical dump Mode
|
||||||
|
|
||||||
|
|
||||||
|
/// Alignment macro. Defines the alignment size.
|
||||||
|
#define Packet_ALIGNMENT sizeof(int)
|
||||||
|
/// Alignment macro. Rounds up to the next even multiple of Packet_ALIGNMENT.
|
||||||
|
#define Packet_WORDALIGN(x) (((x)+(Packet_ALIGNMENT-1))&~(Packet_ALIGNMENT-1))
|
||||||
|
|
||||||
|
#define NdisMediumNull -1 ///< Custom linktype: NDIS doesn't provide an equivalent
|
||||||
|
#define NdisMediumCHDLC -2 ///< Custom linktype: NDIS doesn't provide an equivalent
|
||||||
|
#define NdisMediumPPPSerial -3 ///< Custom linktype: NDIS doesn't provide an equivalent
|
||||||
|
#define NdisMediumBare80211 -4 ///< Custom linktype: NDIS doesn't provide an equivalent
|
||||||
|
#define NdisMediumRadio80211 -5 ///< Custom linktype: NDIS doesn't provide an equivalent
|
||||||
|
#define NdisMediumPpi -6 ///< Custom linktype: NDIS doesn't provide an equivalent
|
||||||
|
|
||||||
|
// Loopback behaviour definitions
|
||||||
|
#define NPF_DISABLE_LOOPBACK 1 ///< Drop the packets sent by the NPF driver
|
||||||
|
#define NPF_ENABLE_LOOPBACK 2 ///< Capture the packets sent by the NPF driver
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Network type structure.
|
||||||
|
|
||||||
|
This structure is used by the PacketGetNetType() function to return information on the current adapter's type and speed.
|
||||||
|
*/
|
||||||
|
typedef struct NetType
|
||||||
|
{
|
||||||
|
UINT LinkType; ///< The MAC of the current network adapter (see function PacketGetNetType() for more information)
|
||||||
|
ULONGLONG LinkSpeed; ///< The speed of the network in bits per second
|
||||||
|
}NetType;
|
||||||
|
|
||||||
|
|
||||||
|
//some definitions stolen from libpcap
|
||||||
|
|
||||||
|
#ifndef BPF_MAJOR_VERSION
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief A BPF pseudo-assembly program.
|
||||||
|
|
||||||
|
The program will be injected in the kernel by the PacketSetBPF() function and applied to every incoming packet.
|
||||||
|
*/
|
||||||
|
struct bpf_program
|
||||||
|
{
|
||||||
|
UINT bf_len; ///< Indicates the number of instructions of the program, i.e. the number of struct bpf_insn that will follow.
|
||||||
|
struct bpf_insn *bf_insns; ///< A pointer to the first instruction of the program.
|
||||||
|
};
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief A single BPF pseudo-instruction.
|
||||||
|
|
||||||
|
bpf_insn contains a single instruction for the BPF register-machine. It is used to send a filter program to the driver.
|
||||||
|
*/
|
||||||
|
struct bpf_insn
|
||||||
|
{
|
||||||
|
USHORT code; ///< Instruction type and addressing mode.
|
||||||
|
UCHAR jt; ///< Jump if true
|
||||||
|
UCHAR jf; ///< Jump if false
|
||||||
|
int k; ///< Generic field used for various purposes.
|
||||||
|
};
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Structure that contains a couple of statistics values on the current capture.
|
||||||
|
|
||||||
|
It is used by packet.dll to return statistics about a capture session.
|
||||||
|
*/
|
||||||
|
struct bpf_stat
|
||||||
|
{
|
||||||
|
UINT bs_recv; ///< Number of packets that the driver received from the network adapter
|
||||||
|
///< from the beginning of the current capture. This value includes the packets
|
||||||
|
///< lost by the driver.
|
||||||
|
UINT bs_drop; ///< number of packets that the driver lost from the beginning of a capture.
|
||||||
|
///< Basically, a packet is lost when the the buffer of the driver is full.
|
||||||
|
///< In this situation the packet cannot be stored and the driver rejects it.
|
||||||
|
UINT ps_ifdrop; ///< drops by interface. XXX not yet supported
|
||||||
|
UINT bs_capt; ///< number of packets that pass the filter, find place in the kernel buffer and
|
||||||
|
///< thus reach the application.
|
||||||
|
};
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Packet header.
|
||||||
|
|
||||||
|
This structure defines the header associated with every packet delivered to the application.
|
||||||
|
*/
|
||||||
|
struct bpf_hdr
|
||||||
|
{
|
||||||
|
struct timeval bh_tstamp; ///< The timestamp associated with the captured packet.
|
||||||
|
///< It is stored in a TimeVal structure.
|
||||||
|
UINT bh_caplen; ///< Length of captured portion. The captured portion <b>can be different</b>
|
||||||
|
///< from the original packet, because it is possible (with a proper filter)
|
||||||
|
///< to instruct the driver to capture only a portion of the packets.
|
||||||
|
UINT bh_datalen; ///< Original length of packet
|
||||||
|
USHORT bh_hdrlen; ///< Length of bpf header (this struct plus alignment padding). In some cases,
|
||||||
|
///< a padding could be added between the end of this structure and the packet
|
||||||
|
///< data for performance reasons. This filed can be used to retrieve the actual data
|
||||||
|
///< of the packet.
|
||||||
|
};
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Dump packet header.
|
||||||
|
|
||||||
|
This structure defines the header associated with the packets in a buffer to be used with PacketSendPackets().
|
||||||
|
It is simpler than the bpf_hdr, because it corresponds to the header associated by WinPcap and libpcap to a
|
||||||
|
packet in a dump file. This makes straightforward sending WinPcap dump files to the network.
|
||||||
|
*/
|
||||||
|
struct dump_bpf_hdr{
|
||||||
|
struct timeval ts; ///< Time stamp of the packet
|
||||||
|
UINT caplen; ///< Length of captured portion. The captured portion can smaller than the
|
||||||
|
///< the original packet, because it is possible (with a proper filter) to
|
||||||
|
///< instruct the driver to capture only a portion of the packets.
|
||||||
|
UINT len; ///< Length of the original packet (off wire).
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
struct bpf_stat;
|
||||||
|
|
||||||
|
#define DOSNAMEPREFIX TEXT("Packet_") ///< Prefix added to the adapters device names to create the WinPcap devices
|
||||||
|
#define MAX_LINK_NAME_LENGTH 64 //< Maximum length of the devices symbolic links
|
||||||
|
#define NMAX_PACKET 65535
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Addresses of a network adapter.
|
||||||
|
|
||||||
|
This structure is used by the PacketGetNetInfoEx() function to return the IP addresses associated with
|
||||||
|
an adapter.
|
||||||
|
*/
|
||||||
|
typedef struct npf_if_addr {
|
||||||
|
struct sockaddr_storage IPAddress; ///< IP address.
|
||||||
|
struct sockaddr_storage SubnetMask; ///< Netmask for that address.
|
||||||
|
struct sockaddr_storage Broadcast; ///< Broadcast address.
|
||||||
|
}npf_if_addr;
|
||||||
|
|
||||||
|
|
||||||
|
#define ADAPTER_NAME_LENGTH 256 + 12 ///< Maximum length for the name of an adapter. The value is the same used by the IP Helper API.
|
||||||
|
#define ADAPTER_DESC_LENGTH 128 ///< Maximum length for the description of an adapter. The value is the same used by the IP Helper API.
|
||||||
|
#define MAX_MAC_ADDR_LENGTH 8 ///< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API.
|
||||||
|
#define MAX_NETWORK_ADDRESSES 16 ///< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API.
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct WAN_ADAPTER_INT WAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API
|
||||||
|
typedef WAN_ADAPTER *PWAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API
|
||||||
|
|
||||||
|
#define INFO_FLAG_NDIS_ADAPTER 0 ///< Flag for ADAPTER_INFO: this is a traditional ndis adapter
|
||||||
|
#define INFO_FLAG_NDISWAN_ADAPTER 1 ///< Flag for ADAPTER_INFO: this is a NdisWan adapter, and it's managed by WANPACKET
|
||||||
|
#define INFO_FLAG_DAG_CARD 2 ///< Flag for ADAPTER_INFO: this is a DAG card
|
||||||
|
#define INFO_FLAG_DAG_FILE 6 ///< Flag for ADAPTER_INFO: this is a DAG file
|
||||||
|
#define INFO_FLAG_DONT_EXPORT 8 ///< Flag for ADAPTER_INFO: when this flag is set, the adapter will not be listed or openend by winpcap. This allows to prevent exporting broken network adapters, like for example FireWire ones.
|
||||||
|
#define INFO_FLAG_AIRPCAP_CARD 16 ///< Flag for ADAPTER_INFO: this is an airpcap card
|
||||||
|
#define INFO_FLAG_NPFIM_DEVICE 32
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Describes an opened network adapter.
|
||||||
|
|
||||||
|
This structure is the most important for the functioning of packet.dll, but the great part of its fields
|
||||||
|
should be ignored by the user, since the library offers functions that avoid to cope with low-level parameters
|
||||||
|
*/
|
||||||
|
typedef struct _ADAPTER {
|
||||||
|
HANDLE hFile; ///< \internal Handle to an open instance of the NPF driver.
|
||||||
|
CHAR SymbolicLink[MAX_LINK_NAME_LENGTH]; ///< \internal A string containing the name of the network adapter currently opened.
|
||||||
|
int NumWrites; ///< \internal Number of times a packets written on this adapter will be repeated
|
||||||
|
///< on the wire.
|
||||||
|
HANDLE ReadEvent; ///< A notification event associated with the read calls on the adapter.
|
||||||
|
///< It can be passed to standard Win32 functions (like WaitForSingleObject
|
||||||
|
///< or WaitForMultipleObjects) to wait until the driver's buffer contains some
|
||||||
|
///< data. It is particularly useful in GUI applications that need to wait
|
||||||
|
///< concurrently on several events. In Windows NT/2000 the PacketSetMinToCopy()
|
||||||
|
///< function can be used to define the minimum amount of data in the kernel buffer
|
||||||
|
///< that will cause the event to be signalled.
|
||||||
|
|
||||||
|
UINT ReadTimeOut; ///< \internal The amount of time after which a read on the driver will be released and
|
||||||
|
///< ReadEvent will be signaled, also if no packets were captured
|
||||||
|
CHAR Name[ADAPTER_NAME_LENGTH];
|
||||||
|
PWAN_ADAPTER pWanAdapter;
|
||||||
|
UINT Flags; ///< Adapter's flags. Tell if this adapter must be treated in a different way, using the Netmon API or the dagc API.
|
||||||
|
|
||||||
|
#ifdef HAVE_AIRPCAP_API
|
||||||
|
PAirpcapHandle AirpcapAd;
|
||||||
|
#endif // HAVE_AIRPCAP_API
|
||||||
|
|
||||||
|
#ifdef HAVE_NPFIM_API
|
||||||
|
void* NpfImHandle;
|
||||||
|
#endif // HAVE_NPFIM_API
|
||||||
|
|
||||||
|
#ifdef HAVE_DAG_API
|
||||||
|
dagc_t *pDagCard; ///< Pointer to the dagc API adapter descriptor for this adapter
|
||||||
|
PCHAR DagBuffer; ///< Pointer to the buffer with the packets that is received from the DAG card
|
||||||
|
struct timeval DagReadTimeout; ///< Read timeout. The dagc API requires a timeval structure
|
||||||
|
unsigned DagFcsLen; ///< Length of the frame check sequence attached to any packet by the card. Obtained from the registry
|
||||||
|
DWORD DagFastProcess; ///< True if the user requests fast capture processing on this card. Higher level applications can use this value to provide a faster but possibly unprecise capture (for example, libpcap doesn't convert the timestamps).
|
||||||
|
#endif // HAVE_DAG_API
|
||||||
|
} ADAPTER, *LPADAPTER;
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Structure that contains a group of packets coming from the driver.
|
||||||
|
|
||||||
|
This structure defines the header associated with every packet delivered to the application.
|
||||||
|
*/
|
||||||
|
typedef struct _PACKET {
|
||||||
|
HANDLE hEvent; ///< \deprecated Still present for compatibility with old applications.
|
||||||
|
OVERLAPPED OverLapped; ///< \deprecated Still present for compatibility with old applications.
|
||||||
|
PVOID Buffer; ///< Buffer with containing the packets. See the PacketReceivePacket() for
|
||||||
|
///< details about the organization of the data in this buffer
|
||||||
|
UINT Length; ///< Length of the buffer
|
||||||
|
DWORD ulBytesReceived; ///< Number of valid bytes present in the buffer, i.e. amount of data
|
||||||
|
///< received by the last call to PacketReceivePacket()
|
||||||
|
BOOLEAN bIoComplete; ///< \deprecated Still present for compatibility with old applications.
|
||||||
|
} PACKET, *LPPACKET;
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Structure containing an OID request.
|
||||||
|
|
||||||
|
It is used by the PacketRequest() function to send an OID to the interface card driver.
|
||||||
|
It can be used, for example, to retrieve the status of the error counters on the adapter, its MAC address,
|
||||||
|
the list of the multicast groups defined on it, and so on.
|
||||||
|
*/
|
||||||
|
struct _PACKET_OID_DATA {
|
||||||
|
ULONG Oid; ///< OID code. See the Microsoft DDK documentation or the file ntddndis.h
|
||||||
|
///< for a complete list of valid codes.
|
||||||
|
ULONG Length; ///< Length of the data field
|
||||||
|
UCHAR Data[1]; ///< variable-lenght field that contains the information passed to or received
|
||||||
|
///< from the adapter.
|
||||||
|
};
|
||||||
|
typedef struct _PACKET_OID_DATA PACKET_OID_DATA, *PPACKET_OID_DATA;
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
BOOLEAN QueryWinPcapRegistryStringA(CHAR *SubKeyName,
|
||||||
|
CHAR *Value,
|
||||||
|
UINT *pValueLen,
|
||||||
|
CHAR *DefaultVal);
|
||||||
|
|
||||||
|
BOOLEAN QueryWinPcapRegistryStringW(WCHAR *SubKeyName,
|
||||||
|
WCHAR *Value,
|
||||||
|
UINT *pValueLen,
|
||||||
|
WCHAR *DefaultVal);
|
||||||
|
*/
|
||||||
|
|
||||||
|
//---------------------------------------------------------------------------
|
||||||
|
// EXPORTED FUNCTIONS
|
||||||
|
//---------------------------------------------------------------------------
|
||||||
|
|
||||||
|
PCHAR PacketGetVersion();
|
||||||
|
PCHAR PacketGetDriverVersion();
|
||||||
|
BOOLEAN PacketSetMinToCopy(LPADAPTER AdapterObject,int nbytes);
|
||||||
|
BOOLEAN PacketSetNumWrites(LPADAPTER AdapterObject,int nwrites);
|
||||||
|
BOOLEAN PacketSetMode(LPADAPTER AdapterObject,int mode);
|
||||||
|
BOOLEAN PacketSetReadTimeout(LPADAPTER AdapterObject,int timeout);
|
||||||
|
BOOLEAN PacketSetBpf(LPADAPTER AdapterObject,struct bpf_program *fp);
|
||||||
|
BOOLEAN PacketSetLoopbackBehavior(LPADAPTER AdapterObject, UINT LoopbackBehavior);
|
||||||
|
INT PacketSetSnapLen(LPADAPTER AdapterObject,int snaplen);
|
||||||
|
BOOLEAN PacketGetStats(LPADAPTER AdapterObject,struct bpf_stat *s);
|
||||||
|
BOOLEAN PacketGetStatsEx(LPADAPTER AdapterObject,struct bpf_stat *s);
|
||||||
|
BOOLEAN PacketSetBuff(LPADAPTER AdapterObject,int dim);
|
||||||
|
BOOLEAN PacketGetNetType (LPADAPTER AdapterObject,NetType *type);
|
||||||
|
LPADAPTER PacketOpenAdapter(PCHAR AdapterName);
|
||||||
|
BOOLEAN PacketSendPacket(LPADAPTER AdapterObject,LPPACKET pPacket,BOOLEAN Sync);
|
||||||
|
INT PacketSendPackets(LPADAPTER AdapterObject,PVOID PacketBuff,ULONG Size, BOOLEAN Sync);
|
||||||
|
LPPACKET PacketAllocatePacket(void);
|
||||||
|
VOID PacketInitPacket(LPPACKET lpPacket,PVOID Buffer,UINT Length);
|
||||||
|
VOID PacketFreePacket(LPPACKET lpPacket);
|
||||||
|
BOOLEAN PacketReceivePacket(LPADAPTER AdapterObject,LPPACKET lpPacket,BOOLEAN Sync);
|
||||||
|
BOOLEAN PacketSetHwFilter(LPADAPTER AdapterObject,ULONG Filter);
|
||||||
|
BOOLEAN PacketGetAdapterNames(PTSTR pStr,PULONG BufferSize);
|
||||||
|
BOOLEAN PacketGetNetInfoEx(PCHAR AdapterName, npf_if_addr* buffer, PLONG NEntries);
|
||||||
|
BOOLEAN PacketRequest(LPADAPTER AdapterObject,BOOLEAN Set,PPACKET_OID_DATA OidData);
|
||||||
|
HANDLE PacketGetReadEvent(LPADAPTER AdapterObject);
|
||||||
|
BOOLEAN PacketSetDumpName(LPADAPTER AdapterObject, void *name, int len);
|
||||||
|
BOOLEAN PacketSetDumpLimits(LPADAPTER AdapterObject, UINT maxfilesize, UINT maxnpacks);
|
||||||
|
BOOLEAN PacketIsDumpEnded(LPADAPTER AdapterObject, BOOLEAN sync);
|
||||||
|
BOOL PacketStopDriver();
|
||||||
|
VOID PacketCloseAdapter(LPADAPTER lpAdapter);
|
||||||
|
BOOLEAN PacketStartOem(PCHAR errorString, UINT errorStringLength);
|
||||||
|
BOOLEAN PacketStartOemEx(PCHAR errorString, UINT errorStringLength, ULONG flags);
|
||||||
|
PAirpcapHandle PacketGetAirPcapHandle(LPADAPTER AdapterObject);
|
||||||
|
|
||||||
|
//
|
||||||
|
// Used by PacketStartOemEx
|
||||||
|
//
|
||||||
|
#define PACKET_START_OEM_NO_NETMON 0x00000001
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif //__PACKET32
|
|
@ -0,0 +1,113 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy)
|
||||||
|
* Copyright (c) 2005 - 2006 CACE Technologies, Davis (California)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Politecnico di Torino, CACE Technologies
|
||||||
|
* nor the names of its contributors may be used to endorse or promote
|
||||||
|
* products derived from this software without specific prior written
|
||||||
|
* permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __WIN32_EXTENSIONS_H__
|
||||||
|
#define __WIN32_EXTENSIONS_H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Definitions */
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit().
|
||||||
|
*/
|
||||||
|
struct pcap_send_queue
|
||||||
|
{
|
||||||
|
u_int maxlen; ///< Maximum size of the the queue, in bytes. This variable contains the size of the buffer field.
|
||||||
|
u_int len; ///< Current size of the queue, in bytes.
|
||||||
|
char *buffer; ///< Buffer containing the packets to be sent.
|
||||||
|
};
|
||||||
|
|
||||||
|
typedef struct pcap_send_queue pcap_send_queue;
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief This typedef is a support for the pcap_get_airpcap_handle() function
|
||||||
|
*/
|
||||||
|
#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_)
|
||||||
|
#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_
|
||||||
|
typedef struct _AirpcapHandle *PAirpcapHandle;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define BPF_MEM_EX_IMM 0xc0
|
||||||
|
#define BPF_MEM_EX_IND 0xe0
|
||||||
|
|
||||||
|
/*used for ST*/
|
||||||
|
#define BPF_MEM_EX 0xc0
|
||||||
|
#define BPF_TME 0x08
|
||||||
|
|
||||||
|
#define BPF_LOOKUP 0x90
|
||||||
|
#define BPF_EXECUTE 0xa0
|
||||||
|
#define BPF_INIT 0xb0
|
||||||
|
#define BPF_VALIDATE 0xc0
|
||||||
|
#define BPF_SET_ACTIVE 0xd0
|
||||||
|
#define BPF_RESET 0xe0
|
||||||
|
#define BPF_SET_MEMORY 0x80
|
||||||
|
#define BPF_GET_REGISTER_VALUE 0x70
|
||||||
|
#define BPF_SET_REGISTER_VALUE 0x60
|
||||||
|
#define BPF_SET_WORKING 0x50
|
||||||
|
#define BPF_SET_ACTIVE_READ 0x40
|
||||||
|
#define BPF_SET_AUTODELETION 0x30
|
||||||
|
#define BPF_SEPARATION 0xff
|
||||||
|
|
||||||
|
/* Prototypes */
|
||||||
|
pcap_send_queue* pcap_sendqueue_alloc(u_int memsize);
|
||||||
|
|
||||||
|
void pcap_sendqueue_destroy(pcap_send_queue* queue);
|
||||||
|
|
||||||
|
int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data);
|
||||||
|
|
||||||
|
u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync);
|
||||||
|
|
||||||
|
HANDLE pcap_getevent(pcap_t *p);
|
||||||
|
|
||||||
|
struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size);
|
||||||
|
|
||||||
|
int pcap_setuserbuffer(pcap_t *p, int size);
|
||||||
|
|
||||||
|
int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks);
|
||||||
|
|
||||||
|
int pcap_live_dump_ended(pcap_t *p, int sync);
|
||||||
|
|
||||||
|
int pcap_offline_filter(struct bpf_program *prog, const struct pcap_pkthdr *header, const u_char *pkt_data);
|
||||||
|
|
||||||
|
int pcap_start_oem(char* err_str, int flags);
|
||||||
|
|
||||||
|
PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p);
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif //__WIN32_EXTENSIONS_H__
|
|
@ -0,0 +1,137 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 1999 WIDE Project.
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the project nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
#ifndef _BITTYPES_H
|
||||||
|
#define _BITTYPES_H
|
||||||
|
|
||||||
|
#ifndef HAVE_U_INT8_T
|
||||||
|
|
||||||
|
#if SIZEOF_CHAR == 1
|
||||||
|
typedef unsigned char u_int8_t;
|
||||||
|
typedef signed char int8_t;
|
||||||
|
#elif SIZEOF_INT == 1
|
||||||
|
typedef unsigned int u_int8_t;
|
||||||
|
typedef signed int int8_t;
|
||||||
|
#else /* XXX */
|
||||||
|
#error "there's no appropriate type for u_int8_t"
|
||||||
|
#endif
|
||||||
|
#define HAVE_U_INT8_T 1
|
||||||
|
#define HAVE_INT8_T 1
|
||||||
|
|
||||||
|
#endif /* HAVE_U_INT8_T */
|
||||||
|
|
||||||
|
#ifndef HAVE_U_INT16_T
|
||||||
|
|
||||||
|
#if SIZEOF_SHORT == 2
|
||||||
|
typedef unsigned short u_int16_t;
|
||||||
|
typedef signed short int16_t;
|
||||||
|
#elif SIZEOF_INT == 2
|
||||||
|
typedef unsigned int u_int16_t;
|
||||||
|
typedef signed int int16_t;
|
||||||
|
#elif SIZEOF_CHAR == 2
|
||||||
|
typedef unsigned char u_int16_t;
|
||||||
|
typedef signed char int16_t;
|
||||||
|
#else /* XXX */
|
||||||
|
#error "there's no appropriate type for u_int16_t"
|
||||||
|
#endif
|
||||||
|
#define HAVE_U_INT16_T 1
|
||||||
|
#define HAVE_INT16_T 1
|
||||||
|
|
||||||
|
#endif /* HAVE_U_INT16_T */
|
||||||
|
|
||||||
|
#ifndef HAVE_U_INT32_T
|
||||||
|
|
||||||
|
#if SIZEOF_INT == 4
|
||||||
|
typedef unsigned int u_int32_t;
|
||||||
|
typedef signed int int32_t;
|
||||||
|
#elif SIZEOF_LONG == 4
|
||||||
|
typedef unsigned long u_int32_t;
|
||||||
|
typedef signed long int32_t;
|
||||||
|
#elif SIZEOF_SHORT == 4
|
||||||
|
typedef unsigned short u_int32_t;
|
||||||
|
typedef signed short int32_t;
|
||||||
|
#else /* XXX */
|
||||||
|
#error "there's no appropriate type for u_int32_t"
|
||||||
|
#endif
|
||||||
|
#define HAVE_U_INT32_T 1
|
||||||
|
#define HAVE_INT32_T 1
|
||||||
|
|
||||||
|
#endif /* HAVE_U_INT32_T */
|
||||||
|
|
||||||
|
#ifndef HAVE_U_INT64_T
|
||||||
|
#if SIZEOF_LONG_LONG == 8
|
||||||
|
typedef unsigned long long u_int64_t;
|
||||||
|
typedef long long int64_t;
|
||||||
|
#elif defined(_MSC_EXTENSIONS)
|
||||||
|
typedef unsigned _int64 u_int64_t;
|
||||||
|
typedef _int64 int64_t;
|
||||||
|
#elif SIZEOF_INT == 8
|
||||||
|
typedef unsigned int u_int64_t;
|
||||||
|
#elif SIZEOF_LONG == 8
|
||||||
|
typedef unsigned long u_int64_t;
|
||||||
|
#elif SIZEOF_SHORT == 8
|
||||||
|
typedef unsigned short u_int64_t;
|
||||||
|
#else /* XXX */
|
||||||
|
#error "there's no appropriate type for u_int64_t"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* HAVE_U_INT64_T */
|
||||||
|
|
||||||
|
#ifndef PRId64
|
||||||
|
#ifdef _MSC_EXTENSIONS
|
||||||
|
#define PRId64 "I64d"
|
||||||
|
#else /* _MSC_EXTENSIONS */
|
||||||
|
#define PRId64 "lld"
|
||||||
|
#endif /* _MSC_EXTENSIONS */
|
||||||
|
#endif /* PRId64 */
|
||||||
|
|
||||||
|
#ifndef PRIo64
|
||||||
|
#ifdef _MSC_EXTENSIONS
|
||||||
|
#define PRIo64 "I64o"
|
||||||
|
#else /* _MSC_EXTENSIONS */
|
||||||
|
#define PRIo64 "llo"
|
||||||
|
#endif /* _MSC_EXTENSIONS */
|
||||||
|
#endif /* PRIo64 */
|
||||||
|
|
||||||
|
#ifndef PRIx64
|
||||||
|
#ifdef _MSC_EXTENSIONS
|
||||||
|
#define PRIx64 "I64x"
|
||||||
|
#else /* _MSC_EXTENSIONS */
|
||||||
|
#define PRIx64 "llx"
|
||||||
|
#endif /* _MSC_EXTENSIONS */
|
||||||
|
#endif /* PRIx64 */
|
||||||
|
|
||||||
|
#ifndef PRIu64
|
||||||
|
#ifdef _MSC_EXTENSIONS
|
||||||
|
#define PRIu64 "I64u"
|
||||||
|
#else /* _MSC_EXTENSIONS */
|
||||||
|
#define PRIu64 "llu"
|
||||||
|
#endif /* _MSC_EXTENSIONS */
|
||||||
|
#endif /* PRIu64 */
|
||||||
|
|
||||||
|
#endif /* _BITTYPES_H */
|
|
@ -0,0 +1,163 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1993, 1994, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that: (1) source code distributions
|
||||||
|
* retain the above copyright notice and this paragraph in its entirety, (2)
|
||||||
|
* distributions including binary code include the above copyright notice and
|
||||||
|
* this paragraph in its entirety in the documentation or other materials
|
||||||
|
* provided with the distribution, and (3) all advertising materials mentioning
|
||||||
|
* features or use of this software display the following acknowledgement:
|
||||||
|
* ``This product includes software developed by the University of California,
|
||||||
|
* Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
|
||||||
|
* the University nor the names of its contributors may be used to endorse
|
||||||
|
* or promote products derived from this software without specific prior
|
||||||
|
* written permission.
|
||||||
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
|
||||||
|
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
|
||||||
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/Win32/Include/ip6_misc.h,v 1.5 2006-01-22 18:02:18 gianluca Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This file contains a collage of declarations for IPv6 from FreeBSD not present in Windows
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <winsock2.h>
|
||||||
|
|
||||||
|
#include <ws2tcpip.h>
|
||||||
|
|
||||||
|
#ifndef __MINGW32__
|
||||||
|
#define IN_MULTICAST(a) IN_CLASSD(a)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define IN_EXPERIMENTAL(a) ((((u_int32_t) (a)) & 0xf0000000) == 0xf0000000)
|
||||||
|
|
||||||
|
#define IN_LOOPBACKNET 127
|
||||||
|
|
||||||
|
#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
|
||||||
|
/* IPv6 address */
|
||||||
|
struct in6_addr
|
||||||
|
{
|
||||||
|
union
|
||||||
|
{
|
||||||
|
u_int8_t u6_addr8[16];
|
||||||
|
u_int16_t u6_addr16[8];
|
||||||
|
u_int32_t u6_addr32[4];
|
||||||
|
} in6_u;
|
||||||
|
#define s6_addr in6_u.u6_addr8
|
||||||
|
#define s6_addr16 in6_u.u6_addr16
|
||||||
|
#define s6_addr32 in6_u.u6_addr32
|
||||||
|
#define s6_addr64 in6_u.u6_addr64
|
||||||
|
};
|
||||||
|
|
||||||
|
#define IN6ADDR_ANY_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
|
||||||
|
#define IN6ADDR_LOOPBACK_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 }
|
||||||
|
#endif /* __MINGW32__ */
|
||||||
|
|
||||||
|
|
||||||
|
#if (defined _MSC_VER) || (defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF))
|
||||||
|
typedef unsigned short sa_family_t;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
|
||||||
|
|
||||||
|
#define __SOCKADDR_COMMON(sa_prefix) \
|
||||||
|
sa_family_t sa_prefix##family
|
||||||
|
|
||||||
|
/* Ditto, for IPv6. */
|
||||||
|
struct sockaddr_in6
|
||||||
|
{
|
||||||
|
__SOCKADDR_COMMON (sin6_);
|
||||||
|
u_int16_t sin6_port; /* Transport layer port # */
|
||||||
|
u_int32_t sin6_flowinfo; /* IPv6 flow information */
|
||||||
|
struct in6_addr sin6_addr; /* IPv6 address */
|
||||||
|
};
|
||||||
|
|
||||||
|
#define IN6_IS_ADDR_V4MAPPED(a) \
|
||||||
|
((((u_int32_t *) (a))[0] == 0) && (((u_int32_t *) (a))[1] == 0) && \
|
||||||
|
(((u_int32_t *) (a))[2] == htonl (0xffff)))
|
||||||
|
|
||||||
|
#define IN6_IS_ADDR_MULTICAST(a) (((u_int8_t *) (a))[0] == 0xff)
|
||||||
|
|
||||||
|
#define IN6_IS_ADDR_LINKLOCAL(a) \
|
||||||
|
((((u_int32_t *) (a))[0] & htonl (0xffc00000)) == htonl (0xfe800000))
|
||||||
|
|
||||||
|
#define IN6_IS_ADDR_LOOPBACK(a) \
|
||||||
|
(((u_int32_t *) (a))[0] == 0 && ((u_int32_t *) (a))[1] == 0 && \
|
||||||
|
((u_int32_t *) (a))[2] == 0 && ((u_int32_t *) (a))[3] == htonl (1))
|
||||||
|
#endif /* __MINGW32__ */
|
||||||
|
|
||||||
|
#define ip6_vfc ip6_ctlun.ip6_un2_vfc
|
||||||
|
#define ip6_flow ip6_ctlun.ip6_un1.ip6_un1_flow
|
||||||
|
#define ip6_plen ip6_ctlun.ip6_un1.ip6_un1_plen
|
||||||
|
#define ip6_nxt ip6_ctlun.ip6_un1.ip6_un1_nxt
|
||||||
|
#define ip6_hlim ip6_ctlun.ip6_un1.ip6_un1_hlim
|
||||||
|
#define ip6_hops ip6_ctlun.ip6_un1.ip6_un1_hlim
|
||||||
|
|
||||||
|
#define nd_rd_type nd_rd_hdr.icmp6_type
|
||||||
|
#define nd_rd_code nd_rd_hdr.icmp6_code
|
||||||
|
#define nd_rd_cksum nd_rd_hdr.icmp6_cksum
|
||||||
|
#define nd_rd_reserved nd_rd_hdr.icmp6_data32[0]
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IPV6 extension headers
|
||||||
|
*/
|
||||||
|
#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
|
||||||
|
#define IPPROTO_IPV6 41 /* IPv6 header. */
|
||||||
|
#define IPPROTO_ROUTING 43 /* IPv6 routing header */
|
||||||
|
#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
|
||||||
|
#define IPPROTO_ESP 50 /* encapsulating security payload */
|
||||||
|
#define IPPROTO_AH 51 /* authentication header */
|
||||||
|
#define IPPROTO_ICMPV6 58 /* ICMPv6 */
|
||||||
|
#define IPPROTO_NONE 59 /* IPv6 no next header */
|
||||||
|
#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
|
||||||
|
#define IPPROTO_PIM 103 /* Protocol Independent Multicast. */
|
||||||
|
|
||||||
|
#define IPV6_RTHDR_TYPE_0 0
|
||||||
|
|
||||||
|
/* Option types and related macros */
|
||||||
|
#define IP6OPT_PAD1 0x00 /* 00 0 00000 */
|
||||||
|
#define IP6OPT_PADN 0x01 /* 00 0 00001 */
|
||||||
|
#define IP6OPT_JUMBO 0xC2 /* 11 0 00010 = 194 */
|
||||||
|
#define IP6OPT_JUMBO_LEN 6
|
||||||
|
#define IP6OPT_ROUTER_ALERT 0x05 /* 00 0 00101 */
|
||||||
|
|
||||||
|
#define IP6OPT_RTALERT_LEN 4
|
||||||
|
#define IP6OPT_RTALERT_MLD 0 /* Datagram contains an MLD message */
|
||||||
|
#define IP6OPT_RTALERT_RSVP 1 /* Datagram contains an RSVP message */
|
||||||
|
#define IP6OPT_RTALERT_ACTNET 2 /* contains an Active Networks msg */
|
||||||
|
#define IP6OPT_MINLEN 2
|
||||||
|
|
||||||
|
#define IP6OPT_BINDING_UPDATE 0xc6 /* 11 0 00110 */
|
||||||
|
#define IP6OPT_BINDING_ACK 0x07 /* 00 0 00111 */
|
||||||
|
#define IP6OPT_BINDING_REQ 0x08 /* 00 0 01000 */
|
||||||
|
#define IP6OPT_HOME_ADDRESS 0xc9 /* 11 0 01001 */
|
||||||
|
#define IP6OPT_EID 0x8a /* 10 0 01010 */
|
||||||
|
|
||||||
|
#define IP6OPT_TYPE(o) ((o) & 0xC0)
|
||||||
|
#define IP6OPT_TYPE_SKIP 0x00
|
||||||
|
#define IP6OPT_TYPE_DISCARD 0x40
|
||||||
|
#define IP6OPT_TYPE_FORCEICMP 0x80
|
||||||
|
#define IP6OPT_TYPE_ICMP 0xC0
|
||||||
|
|
||||||
|
#define IP6OPT_MUTABLE 0x20
|
||||||
|
|
||||||
|
|
||||||
|
#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
|
||||||
|
#ifndef EAI_ADDRFAMILY
|
||||||
|
struct addrinfo {
|
||||||
|
int ai_flags; /* AI_PASSIVE, AI_CANONNAME */
|
||||||
|
int ai_family; /* PF_xxx */
|
||||||
|
int ai_socktype; /* SOCK_xxx */
|
||||||
|
int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */
|
||||||
|
size_t ai_addrlen; /* length of ai_addr */
|
||||||
|
char *ai_canonname; /* canonical name for hostname */
|
||||||
|
struct sockaddr *ai_addr; /* binary address */
|
||||||
|
struct addrinfo *ai_next; /* next structure in linked list */
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
#endif /* __MINGW32__ */
|
|
@ -0,0 +1,47 @@
|
||||||
|
/*-
|
||||||
|
* Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* This code is derived from the Stanford/CMU enet packet filter,
|
||||||
|
* (net/enet.c) distributed as part of 4.3BSD, and code contributed
|
||||||
|
* to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
|
||||||
|
* Berkeley Laboratory.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the University of
|
||||||
|
* California, Berkeley and its contributors.
|
||||||
|
* 4. Neither the name of the University nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap-bpf.h,v 1.50 2007/04/01 21:43:55 guy Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For backwards compatibility.
|
||||||
|
*
|
||||||
|
* Note to OS vendors: do NOT get rid of this file! Some applications
|
||||||
|
* might expect to be able to include <pcap-bpf.h>.
|
||||||
|
*/
|
||||||
|
#include <pcap/bpf.h>
|
|
@ -0,0 +1,42 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1994, 1996
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the Computer Systems
|
||||||
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
||||||
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
||||||
|
* to endorse or promote products derived from this software without
|
||||||
|
* specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap-namedb.h,v 1.13 2006/10/04 18:13:32 guy Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For backwards compatibility.
|
||||||
|
*
|
||||||
|
* Note to OS vendors: do NOT get rid of this file! Some applications
|
||||||
|
* might expect to be able to include <pcap-namedb.h>.
|
||||||
|
*/
|
||||||
|
#include <pcap/namedb.h>
|
|
@ -0,0 +1,93 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2002 - 2005 NetGroup, Politecnico di Torino (Italy)
|
||||||
|
* Copyright (c) 2005 - 2009 CACE Technologies, Inc. Davis (California)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Politecnico di Torino nor the names of its
|
||||||
|
* contributors may be used to endorse or promote products derived from
|
||||||
|
* this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap-stdinc.h,v 1.10.2.1 2008-10-06 15:38:39 gianluca Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define SIZEOF_CHAR 1
|
||||||
|
#define SIZEOF_SHORT 2
|
||||||
|
#define SIZEOF_INT 4
|
||||||
|
#ifndef _MSC_EXTENSIONS
|
||||||
|
#define SIZEOF_LONG_LONG 8
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Avoids a compiler warning in case this was already defined
|
||||||
|
* (someone defined _WINSOCKAPI_ when including 'windows.h', in order
|
||||||
|
* to prevent it from including 'winsock.h')
|
||||||
|
*/
|
||||||
|
#ifdef _WINSOCKAPI_
|
||||||
|
#undef _WINSOCKAPI_
|
||||||
|
#endif
|
||||||
|
#include <winsock2.h>
|
||||||
|
|
||||||
|
#include <fcntl.h>
|
||||||
|
|
||||||
|
#include "bittypes.h"
|
||||||
|
#include <time.h>
|
||||||
|
#include <io.h>
|
||||||
|
|
||||||
|
#ifndef __MINGW32__
|
||||||
|
#include "IP6_misc.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define caddr_t char*
|
||||||
|
|
||||||
|
#if _MSC_VER < 1500
|
||||||
|
#define snprintf _snprintf
|
||||||
|
#define vsnprintf _vsnprintf
|
||||||
|
#define strdup _strdup
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define inline __inline
|
||||||
|
|
||||||
|
#ifdef __MINGW32__
|
||||||
|
#include <stdint.h>
|
||||||
|
#else /*__MINGW32__*/
|
||||||
|
/* MSVC compiler */
|
||||||
|
#ifndef _UINTPTR_T_DEFINED
|
||||||
|
#ifdef _WIN64
|
||||||
|
typedef unsigned __int64 uintptr_t;
|
||||||
|
#else
|
||||||
|
typedef _W64 unsigned int uintptr_t;
|
||||||
|
#endif
|
||||||
|
#define _UINTPTR_T_DEFINED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef _INTPTR_T_DEFINED
|
||||||
|
#ifdef _WIN64
|
||||||
|
typedef __int64 intptr_t;
|
||||||
|
#else
|
||||||
|
typedef _W64 int intptr_t;
|
||||||
|
#endif
|
||||||
|
#define _INTPTR_T_DEFINED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /*__MINGW32__*/
|
|
@ -0,0 +1,45 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1993, 1994, 1995, 1996, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the Computer Systems
|
||||||
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
||||||
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
||||||
|
* to endorse or promote products derived from this software without
|
||||||
|
* specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap.h,v 1.59 2006/10/04 18:09:22 guy Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For backwards compatibility.
|
||||||
|
*
|
||||||
|
* Note to OS vendors: do NOT get rid of this file! Many applications
|
||||||
|
* expect to be able to include <pcap.h>, and at least some of them
|
||||||
|
* go through contortions in their configure scripts to try to detect
|
||||||
|
* OSes that have "helpfully" moved pcap.h to <pcap/pcap.h> without
|
||||||
|
* leaving behind a <pcap.h> file.
|
||||||
|
*/
|
||||||
|
#include <pcap/pcap.h>
|
|
@ -0,0 +1,48 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006 Paolo Abeni (Italy)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. The name of the author may not be used to endorse or promote
|
||||||
|
* products derived from this software without specific prior written
|
||||||
|
* permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* bluetooth data struct
|
||||||
|
* By Paolo Abeni <paolo.abeni@email.it>
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/bluetooth.h,v 1.1 2007/09/22 02:10:17 guy Exp $
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _PCAP_BLUETOOTH_STRUCTS_H__
|
||||||
|
#define _PCAP_BLUETOOTH_STRUCTS_H__
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Header prepended libpcap to each bluetooth h:4 frame.
|
||||||
|
* fields are in network byte order
|
||||||
|
*/
|
||||||
|
typedef struct _pcap_bluetooth_h4_header {
|
||||||
|
u_int32_t direction; /* if first bit is set direction is incoming */
|
||||||
|
} pcap_bluetooth_h4_header;
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,934 @@
|
||||||
|
/*-
|
||||||
|
* Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* This code is derived from the Stanford/CMU enet packet filter,
|
||||||
|
* (net/enet.c) distributed as part of 4.3BSD, and code contributed
|
||||||
|
* to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
|
||||||
|
* Berkeley Laboratory.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the University of
|
||||||
|
* California, Berkeley and its contributors.
|
||||||
|
* 4. Neither the name of the University nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#)bpf.h 7.1 (Berkeley) 5/7/91
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.19.2.8 2008-09-22 20:16:01 guy Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This is libpcap's cut-down version of bpf.h; it includes only
|
||||||
|
* the stuff needed for the code generator and the userland BPF
|
||||||
|
* interpreter, and the libpcap APIs for setting filters, etc..
|
||||||
|
*
|
||||||
|
* "pcap-bpf.c" will include the native OS version, as it deals with
|
||||||
|
* the OS's BPF implementation.
|
||||||
|
*
|
||||||
|
* XXX - should this all just be moved to "pcap.h"?
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BPF_MAJOR_VERSION
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* BSD style release date */
|
||||||
|
#define BPF_RELEASE 199606
|
||||||
|
|
||||||
|
#ifdef MSDOS /* must be 32-bit */
|
||||||
|
typedef long bpf_int32;
|
||||||
|
typedef unsigned long bpf_u_int32;
|
||||||
|
#else
|
||||||
|
typedef int bpf_int32;
|
||||||
|
typedef u_int bpf_u_int32;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Alignment macros. BPF_WORDALIGN rounds up to the next
|
||||||
|
* even multiple of BPF_ALIGNMENT.
|
||||||
|
*/
|
||||||
|
#ifndef __NetBSD__
|
||||||
|
#define BPF_ALIGNMENT sizeof(bpf_int32)
|
||||||
|
#else
|
||||||
|
#define BPF_ALIGNMENT sizeof(long)
|
||||||
|
#endif
|
||||||
|
#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
|
||||||
|
|
||||||
|
#define BPF_MAXBUFSIZE 0x8000
|
||||||
|
#define BPF_MINBUFSIZE 32
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Structure for "pcap_compile()", "pcap_setfilter()", etc..
|
||||||
|
*/
|
||||||
|
struct bpf_program {
|
||||||
|
u_int bf_len;
|
||||||
|
struct bpf_insn *bf_insns;
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Struct return by BIOCVERSION. This represents the version number of
|
||||||
|
* the filter language described by the instruction encodings below.
|
||||||
|
* bpf understands a program iff kernel_major == filter_major &&
|
||||||
|
* kernel_minor >= filter_minor, that is, if the value returned by the
|
||||||
|
* running kernel has the same major number and a minor number equal
|
||||||
|
* equal to or less than the filter being downloaded. Otherwise, the
|
||||||
|
* results are undefined, meaning an error may be returned or packets
|
||||||
|
* may be accepted haphazardly.
|
||||||
|
* It has nothing to do with the source code version.
|
||||||
|
*/
|
||||||
|
struct bpf_version {
|
||||||
|
u_short bv_major;
|
||||||
|
u_short bv_minor;
|
||||||
|
};
|
||||||
|
/* Current version number of filter architecture. */
|
||||||
|
#define BPF_MAJOR_VERSION 1
|
||||||
|
#define BPF_MINOR_VERSION 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Data-link level type codes.
|
||||||
|
*
|
||||||
|
* Do *NOT* add new values to this list without asking
|
||||||
|
* "tcpdump-workers@lists.tcpdump.org" for a value. Otherwise, you run
|
||||||
|
* the risk of using a value that's already being used for some other
|
||||||
|
* purpose, and of having tools that read libpcap-format captures not
|
||||||
|
* being able to handle captures with your new DLT_ value, with no hope
|
||||||
|
* that they will ever be changed to do so (as that would destroy their
|
||||||
|
* ability to read captures using that value for that other purpose).
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* These are the types that are the same on all platforms, and that
|
||||||
|
* have been defined by <net/bpf.h> for ages.
|
||||||
|
*/
|
||||||
|
#define DLT_NULL 0 /* BSD loopback encapsulation */
|
||||||
|
#define DLT_EN10MB 1 /* Ethernet (10Mb) */
|
||||||
|
#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */
|
||||||
|
#define DLT_AX25 3 /* Amateur Radio AX.25 */
|
||||||
|
#define DLT_PRONET 4 /* Proteon ProNET Token Ring */
|
||||||
|
#define DLT_CHAOS 5 /* Chaos */
|
||||||
|
#define DLT_IEEE802 6 /* 802.5 Token Ring */
|
||||||
|
#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */
|
||||||
|
#define DLT_SLIP 8 /* Serial Line IP */
|
||||||
|
#define DLT_PPP 9 /* Point-to-point Protocol */
|
||||||
|
#define DLT_FDDI 10 /* FDDI */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* These are types that are different on some platforms, and that
|
||||||
|
* have been defined by <net/bpf.h> for ages. We use #ifdefs to
|
||||||
|
* detect the BSDs that define them differently from the traditional
|
||||||
|
* libpcap <net/bpf.h>
|
||||||
|
*
|
||||||
|
* XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS,
|
||||||
|
* but I don't know what the right #define is for BSD/OS.
|
||||||
|
*/
|
||||||
|
#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */
|
||||||
|
|
||||||
|
#ifdef __OpenBSD__
|
||||||
|
#define DLT_RAW 14 /* raw IP */
|
||||||
|
#else
|
||||||
|
#define DLT_RAW 12 /* raw IP */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Given that the only OS that currently generates BSD/OS SLIP or PPP
|
||||||
|
* is, well, BSD/OS, arguably everybody should have chosen its values
|
||||||
|
* for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they
|
||||||
|
* didn't. So it goes.
|
||||||
|
*/
|
||||||
|
#if defined(__NetBSD__) || defined(__FreeBSD__)
|
||||||
|
#ifndef DLT_SLIP_BSDOS
|
||||||
|
#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */
|
||||||
|
#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */
|
||||||
|
#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* 17 is used for DLT_OLD_PFLOG in OpenBSD;
|
||||||
|
* OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below.
|
||||||
|
* 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Apparently Redback uses this for its SmartEdge 400/800. I hope
|
||||||
|
* nobody else decided to use it, too.
|
||||||
|
*/
|
||||||
|
#define DLT_REDBACK_SMARTEDGE 32
|
||||||
|
|
||||||
|
/*
|
||||||
|
* These values are defined by NetBSD; other platforms should refrain from
|
||||||
|
* using them for other purposes, so that NetBSD savefiles with link
|
||||||
|
* types of 50 or 51 can be read as this type on all platforms.
|
||||||
|
*/
|
||||||
|
#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */
|
||||||
|
#define DLT_PPP_ETHER 51 /* PPP over Ethernet */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses
|
||||||
|
* a link-layer type of 99 for the tcpdump it supplies. The link-layer
|
||||||
|
* header has 6 bytes of unknown data, something that appears to be an
|
||||||
|
* Ethernet type, and 36 bytes that appear to be 0 in at least one capture
|
||||||
|
* I've seen.
|
||||||
|
*/
|
||||||
|
#define DLT_SYMANTEC_FIREWALL 99
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Values between 100 and 103 are used in capture file headers as
|
||||||
|
* link-layer types corresponding to DLT_ types that differ
|
||||||
|
* between platforms; don't use those values for new DLT_ new types.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This value was defined by libpcap 0.5; platforms that have defined
|
||||||
|
* it with a different value should define it here with that value -
|
||||||
|
* a link type of 104 in a save file will be mapped to DLT_C_HDLC,
|
||||||
|
* whatever value that happens to be, so programs will correctly
|
||||||
|
* handle files with that link type regardless of the value of
|
||||||
|
* DLT_C_HDLC.
|
||||||
|
*
|
||||||
|
* The name DLT_C_HDLC was used by BSD/OS; we use that name for source
|
||||||
|
* compatibility with programs written for BSD/OS.
|
||||||
|
*
|
||||||
|
* libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
|
||||||
|
* for source compatibility with programs written for libpcap 0.5.
|
||||||
|
*/
|
||||||
|
#define DLT_C_HDLC 104 /* Cisco HDLC */
|
||||||
|
#define DLT_CHDLC DLT_C_HDLC
|
||||||
|
|
||||||
|
#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW,
|
||||||
|
* except when it isn't. (I.e., sometimes it's just raw IP, and
|
||||||
|
* sometimes it isn't.) We currently handle it as DLT_LINUX_SLL,
|
||||||
|
* so that we don't have to worry about the link-layer header.)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides
|
||||||
|
* with other values.
|
||||||
|
* DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header
|
||||||
|
* (DLCI, etc.).
|
||||||
|
*/
|
||||||
|
#define DLT_FRELAY 107
|
||||||
|
|
||||||
|
/*
|
||||||
|
* OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
|
||||||
|
* that the AF_ type in the link-layer header is in network byte order.
|
||||||
|
*
|
||||||
|
* DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so
|
||||||
|
* we don't use 12 for it in OSes other than OpenBSD.
|
||||||
|
*/
|
||||||
|
#ifdef __OpenBSD__
|
||||||
|
#define DLT_LOOP 12
|
||||||
|
#else
|
||||||
|
#define DLT_LOOP 108
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
|
||||||
|
* DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
|
||||||
|
* than OpenBSD.
|
||||||
|
*/
|
||||||
|
#ifdef __OpenBSD__
|
||||||
|
#define DLT_ENC 13
|
||||||
|
#else
|
||||||
|
#define DLT_ENC 109
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Values between 110 and 112 are reserved for use in capture file headers
|
||||||
|
* as link-layer types corresponding to DLT_ types that might differ
|
||||||
|
* between platforms; don't use those values for new DLT_ types
|
||||||
|
* other than the corresponding DLT_ types.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This is for Linux cooked sockets.
|
||||||
|
*/
|
||||||
|
#define DLT_LINUX_SLL 113
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Apple LocalTalk hardware.
|
||||||
|
*/
|
||||||
|
#define DLT_LTALK 114
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Acorn Econet.
|
||||||
|
*/
|
||||||
|
#define DLT_ECONET 115
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for use with OpenBSD ipfilter.
|
||||||
|
*/
|
||||||
|
#define DLT_IPFILTER 116
|
||||||
|
|
||||||
|
/*
|
||||||
|
* OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023
|
||||||
|
* in SuSE 6.3, so we can't use 17 for it in capture-file headers.
|
||||||
|
*
|
||||||
|
* XXX: is there a conflict with DLT_PFSYNC 18 as well?
|
||||||
|
*/
|
||||||
|
#ifdef __OpenBSD__
|
||||||
|
#define DLT_OLD_PFLOG 17
|
||||||
|
#define DLT_PFSYNC 18
|
||||||
|
#endif
|
||||||
|
#define DLT_PFLOG 117
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Registered for Cisco-internal use.
|
||||||
|
*/
|
||||||
|
#define DLT_CISCO_IOS 118
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For 802.11 cards using the Prism II chips, with a link-layer
|
||||||
|
* header including Prism monitor mode information plus an 802.11
|
||||||
|
* header.
|
||||||
|
*/
|
||||||
|
#define DLT_PRISM_HEADER 119
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for Aironet 802.11 cards, with an Aironet link-layer header
|
||||||
|
* (see Doug Ambrisko's FreeBSD patches).
|
||||||
|
*/
|
||||||
|
#define DLT_AIRONET_HEADER 120
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for Siemens HiPath HDLC.
|
||||||
|
*/
|
||||||
|
#define DLT_HHDLC 121
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This is for RFC 2625 IP-over-Fibre Channel.
|
||||||
|
*
|
||||||
|
* This is not for use with raw Fibre Channel, where the link-layer
|
||||||
|
* header starts with a Fibre Channel frame header; it's for IP-over-FC,
|
||||||
|
* where the link-layer header starts with an RFC 2625 Network_Header
|
||||||
|
* field.
|
||||||
|
*/
|
||||||
|
#define DLT_IP_OVER_FC 122
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This is for Full Frontal ATM on Solaris with SunATM, with a
|
||||||
|
* pseudo-header followed by an AALn PDU.
|
||||||
|
*
|
||||||
|
* There may be other forms of Full Frontal ATM on other OSes,
|
||||||
|
* with different pseudo-headers.
|
||||||
|
*
|
||||||
|
* If ATM software returns a pseudo-header with VPI/VCI information
|
||||||
|
* (and, ideally, packet type information, e.g. signalling, ILMI,
|
||||||
|
* LANE, LLC-multiplexed traffic, etc.), it should not use
|
||||||
|
* DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump
|
||||||
|
* and the like don't have to infer the presence or absence of a
|
||||||
|
* pseudo-header and the form of the pseudo-header.
|
||||||
|
*/
|
||||||
|
#define DLT_SUNATM 123 /* Solaris+SunATM */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved as per request from Kent Dahlgren <kent@praesum.com>
|
||||||
|
* for private use.
|
||||||
|
*/
|
||||||
|
#define DLT_RIO 124 /* RapidIO */
|
||||||
|
#define DLT_PCI_EXP 125 /* PCI Express */
|
||||||
|
#define DLT_AURORA 126 /* Xilinx Aurora link layer */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Header for 802.11 plus a number of bits of link-layer information
|
||||||
|
* including radio information, used by some recent BSD drivers as
|
||||||
|
* well as the madwifi Atheros driver for Linux.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for the TZSP encapsulation, as per request from
|
||||||
|
* Chris Waters <chris.waters@networkchemistry.com>
|
||||||
|
* TZSP is a generic encapsulation for any other link type,
|
||||||
|
* which includes a means to include meta-information
|
||||||
|
* with the packet, e.g. signal strength and channel
|
||||||
|
* for 802.11 packets.
|
||||||
|
*/
|
||||||
|
#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* BSD's ARCNET headers have the source host, destination host,
|
||||||
|
* and type at the beginning of the packet; that's what's handed
|
||||||
|
* up to userland via BPF.
|
||||||
|
*
|
||||||
|
* Linux's ARCNET headers, however, have a 2-byte offset field
|
||||||
|
* between the host IDs and the type; that's what's handed up
|
||||||
|
* to userland via PF_PACKET sockets.
|
||||||
|
*
|
||||||
|
* We therefore have to have separate DLT_ values for them.
|
||||||
|
*/
|
||||||
|
#define DLT_ARCNET_LINUX 129 /* ARCNET */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link types, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>. The DLT_s are used
|
||||||
|
* for passing on chassis-internal metainformation such as
|
||||||
|
* QOS profiles, etc..
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_MLPPP 130
|
||||||
|
#define DLT_JUNIPER_MLFR 131
|
||||||
|
#define DLT_JUNIPER_ES 132
|
||||||
|
#define DLT_JUNIPER_GGSN 133
|
||||||
|
#define DLT_JUNIPER_MFR 134
|
||||||
|
#define DLT_JUNIPER_ATM2 135
|
||||||
|
#define DLT_JUNIPER_SERVICES 136
|
||||||
|
#define DLT_JUNIPER_ATM1 137
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
|
||||||
|
* <dieter@apple.com>. The header that's presented is an Ethernet-like
|
||||||
|
* header:
|
||||||
|
*
|
||||||
|
* #define FIREWIRE_EUI64_LEN 8
|
||||||
|
* struct firewire_header {
|
||||||
|
* u_char firewire_dhost[FIREWIRE_EUI64_LEN];
|
||||||
|
* u_char firewire_shost[FIREWIRE_EUI64_LEN];
|
||||||
|
* u_short firewire_type;
|
||||||
|
* };
|
||||||
|
*
|
||||||
|
* with "firewire_type" being an Ethernet type value, rather than,
|
||||||
|
* for example, raw GASP frames being handed up.
|
||||||
|
*/
|
||||||
|
#define DLT_APPLE_IP_OVER_IEEE1394 138
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Various SS7 encapsulations, as per a request from Jeff Morriss
|
||||||
|
* <jeff.morriss[AT]ulticom.com> and subsequent discussions.
|
||||||
|
*/
|
||||||
|
#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */
|
||||||
|
#define DLT_MTP2 140 /* MTP2, without pseudo-header */
|
||||||
|
#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */
|
||||||
|
#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* DOCSIS MAC frames.
|
||||||
|
*/
|
||||||
|
#define DLT_DOCSIS 143
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Linux-IrDA packets. Protocol defined at http://www.irda.org.
|
||||||
|
* Those packets include IrLAP headers and above (IrLMP...), but
|
||||||
|
* don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy
|
||||||
|
* framing can be handled by the hardware and depend on the bitrate.
|
||||||
|
* This is exactly the format you would get capturing on a Linux-IrDA
|
||||||
|
* interface (irdaX), but not on a raw serial port.
|
||||||
|
* Note the capture is done in "Linux-cooked" mode, so each packet include
|
||||||
|
* a fake packet header (struct sll_header). This is because IrDA packet
|
||||||
|
* decoding is dependant on the direction of the packet (incomming or
|
||||||
|
* outgoing).
|
||||||
|
* When/if other platform implement IrDA capture, we may revisit the
|
||||||
|
* issue and define a real DLT_IRDA...
|
||||||
|
* Jean II
|
||||||
|
*/
|
||||||
|
#define DLT_LINUX_IRDA 144
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for IBM SP switch and IBM Next Federation switch.
|
||||||
|
*/
|
||||||
|
#define DLT_IBM_SP 145
|
||||||
|
#define DLT_IBM_SN 146
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for private use. If you have some link-layer header type
|
||||||
|
* that you want to use within your organization, with the capture files
|
||||||
|
* using that link-layer header type not ever be sent outside your
|
||||||
|
* organization, you can use these values.
|
||||||
|
*
|
||||||
|
* No libpcap release will use these for any purpose, nor will any
|
||||||
|
* tcpdump release use them, either.
|
||||||
|
*
|
||||||
|
* Do *NOT* use these in capture files that you expect anybody not using
|
||||||
|
* your private versions of capture-file-reading tools to read; in
|
||||||
|
* particular, do *NOT* use them in products, otherwise you may find that
|
||||||
|
* people won't be able to use tcpdump, or snort, or Ethereal, or... to
|
||||||
|
* read capture files from your firewall/intrusion detection/traffic
|
||||||
|
* monitoring/etc. appliance, or whatever product uses that DLT_ value,
|
||||||
|
* and you may also find that the developers of those applications will
|
||||||
|
* not accept patches to let them read those files.
|
||||||
|
*
|
||||||
|
* Also, do not use them if somebody might send you a capture using them
|
||||||
|
* for *their* private type and tools using them for *your* private type
|
||||||
|
* would have to read them.
|
||||||
|
*
|
||||||
|
* Instead, ask "tcpdump-workers@lists.tcpdump.org" for a new DLT_ value,
|
||||||
|
* as per the comment above, and use the type you're given.
|
||||||
|
*/
|
||||||
|
#define DLT_USER0 147
|
||||||
|
#define DLT_USER1 148
|
||||||
|
#define DLT_USER2 149
|
||||||
|
#define DLT_USER3 150
|
||||||
|
#define DLT_USER4 151
|
||||||
|
#define DLT_USER5 152
|
||||||
|
#define DLT_USER6 153
|
||||||
|
#define DLT_USER7 154
|
||||||
|
#define DLT_USER8 155
|
||||||
|
#define DLT_USER9 156
|
||||||
|
#define DLT_USER10 157
|
||||||
|
#define DLT_USER11 158
|
||||||
|
#define DLT_USER12 159
|
||||||
|
#define DLT_USER13 160
|
||||||
|
#define DLT_USER14 161
|
||||||
|
#define DLT_USER15 162
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For future use with 802.11 captures - defined by AbsoluteValue
|
||||||
|
* Systems to store a number of bits of link-layer information
|
||||||
|
* including radio information:
|
||||||
|
*
|
||||||
|
* http://www.shaftnet.org/~pizza/software/capturefrm.txt
|
||||||
|
*
|
||||||
|
* but it might be used by some non-AVS drivers now or in the
|
||||||
|
* future.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>. The DLT_s are used
|
||||||
|
* for passing on chassis-internal metainformation such as
|
||||||
|
* QOS profiles, etc..
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_MONITOR 164
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reserved for BACnet MS/TP.
|
||||||
|
*/
|
||||||
|
#define DLT_BACNET_MS_TP 165
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Another PPP variant as per request from Karsten Keil <kkeil@suse.de>.
|
||||||
|
*
|
||||||
|
* This is used in some OSes to allow a kernel socket filter to distinguish
|
||||||
|
* between incoming and outgoing packets, on a socket intended to
|
||||||
|
* supply pppd with outgoing packets so it can do dial-on-demand and
|
||||||
|
* hangup-on-lack-of-demand; incoming packets are filtered out so they
|
||||||
|
* don't cause pppd to hold the connection up (you don't want random
|
||||||
|
* input packets such as port scans, packets from old lost connections,
|
||||||
|
* etc. to force the connection to stay up).
|
||||||
|
*
|
||||||
|
* The first byte of the PPP header (0xff03) is modified to accomodate
|
||||||
|
* the direction - 0x00 = IN, 0x01 = OUT.
|
||||||
|
*/
|
||||||
|
#define DLT_PPP_PPPD 166
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Names for backwards compatibility with older versions of some PPP
|
||||||
|
* software; new software should use DLT_PPP_PPPD.
|
||||||
|
*/
|
||||||
|
#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD
|
||||||
|
#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>. The DLT_s are used
|
||||||
|
* for passing on chassis-internal metainformation such as
|
||||||
|
* QOS profiles, cookies, etc..
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_PPPOE 167
|
||||||
|
#define DLT_JUNIPER_PPPOE_ATM 168
|
||||||
|
|
||||||
|
#define DLT_GPRS_LLC 169 /* GPRS LLC */
|
||||||
|
#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */
|
||||||
|
#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line
|
||||||
|
* monitoring equipment.
|
||||||
|
*/
|
||||||
|
#define DLT_GCOM_T1E1 172
|
||||||
|
#define DLT_GCOM_SERIAL 173
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>. The DLT_ is used
|
||||||
|
* for internal communication to Physical Interface Cards (PIC)
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_PIC_PEER 174
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Link types requested by Gregor Maier <gregor@endace.com> of Endace
|
||||||
|
* Measurement Systems. They add an ERF header (see
|
||||||
|
* http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
|
||||||
|
* the link-layer header.
|
||||||
|
*/
|
||||||
|
#define DLT_ERF_ETH 175 /* Ethernet */
|
||||||
|
#define DLT_ERF_POS 176 /* Packet-over-SONET */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD
|
||||||
|
* for vISDN (http://www.orlandi.com/visdn/). Its link-layer header
|
||||||
|
* includes additional information before the LAPD header, so it's
|
||||||
|
* not necessarily a generic LAPD header.
|
||||||
|
*/
|
||||||
|
#define DLT_LINUX_LAPD 177
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>.
|
||||||
|
* The DLT_ are used for prepending meta-information
|
||||||
|
* like interface index, interface name
|
||||||
|
* before standard Ethernet, PPP, Frelay & C-HDLC Frames
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_ETHER 178
|
||||||
|
#define DLT_JUNIPER_PPP 179
|
||||||
|
#define DLT_JUNIPER_FRELAY 180
|
||||||
|
#define DLT_JUNIPER_CHDLC 181
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Multi Link Frame Relay (FRF.16)
|
||||||
|
*/
|
||||||
|
#define DLT_MFR 182
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>.
|
||||||
|
* The DLT_ is used for internal communication with a
|
||||||
|
* voice Adapter Card (PIC)
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_VP 183
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Arinc 429 frames.
|
||||||
|
* DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
||||||
|
* Every frame contains a 32bit A429 label.
|
||||||
|
* More documentation on Arinc 429 can be found at
|
||||||
|
* http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
|
||||||
|
*/
|
||||||
|
#define DLT_A429 184
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Arinc 653 Interpartition Communication messages.
|
||||||
|
* DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
||||||
|
* Please refer to the A653-1 standard for more information.
|
||||||
|
*/
|
||||||
|
#define DLT_A653_ICM 185
|
||||||
|
|
||||||
|
/*
|
||||||
|
* USB packets, beginning with a USB setup header; requested by
|
||||||
|
* Paolo Abeni <paolo.abeni@email.it>.
|
||||||
|
*/
|
||||||
|
#define DLT_USB 186
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Bluetooth HCI UART transport layer (part H:4); requested by
|
||||||
|
* Paolo Abeni.
|
||||||
|
*/
|
||||||
|
#define DLT_BLUETOOTH_HCI_H4 187
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz
|
||||||
|
* <cruz_petagay@bah.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_16_MAC_CPS 188
|
||||||
|
|
||||||
|
/*
|
||||||
|
* USB packets, beginning with a Linux USB header; requested by
|
||||||
|
* Paolo Abeni <paolo.abeni@email.it>.
|
||||||
|
*/
|
||||||
|
#define DLT_USB_LINUX 189
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Controller Area Network (CAN) v. 2.0B packets.
|
||||||
|
* DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
||||||
|
* Used to dump CAN packets coming from a CAN Vector board.
|
||||||
|
* More documentation on the CAN v2.0B frames can be found at
|
||||||
|
* http://www.can-cia.org/downloads/?269
|
||||||
|
*/
|
||||||
|
#define DLT_CAN20B 190
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IEEE 802.15.4, with address fields padded, as is done by Linux
|
||||||
|
* drivers; requested by Juergen Schimmer.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_15_4_LINUX 191
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Per Packet Information encapsulated packets.
|
||||||
|
* DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_PPI 192
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header;
|
||||||
|
* requested by Charles Clancy.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_16_MAC_CPS_RADIO 193
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>.
|
||||||
|
* The DLT_ is used for internal communication with a
|
||||||
|
* integrated service module (ISM).
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_ISM 194
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IEEE 802.15.4, exactly as it appears in the spec (no padding, no
|
||||||
|
* nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_15_4 195
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Various link-layer types, with a pseudo-header, for SITA
|
||||||
|
* (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
|
||||||
|
*/
|
||||||
|
#define DLT_SITA 196
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Various link-layer types, with a pseudo-header, for Endace DAG cards;
|
||||||
|
* encapsulates Endace ERF records. Requested by Stephen Donnelly
|
||||||
|
* <stephen@endace.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_ERF 197
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Special header prepended to Ethernet packets when capturing from a
|
||||||
|
* u10 Networks board. Requested by Phil Mulholland
|
||||||
|
* <phil@u10networks.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_RAIF1 198
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IPMB packet for IPMI, beginning with the I2C slave address, followed
|
||||||
|
* by the netFn and LUN, etc.. Requested by Chanthy Toeung
|
||||||
|
* <chanthy.toeung@ca.kontron.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_IPMB 199
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Juniper-private data link type, as per request from
|
||||||
|
* Hannes Gredler <hannes@juniper.net>.
|
||||||
|
* The DLT_ is used for capturing data on a secure tunnel interface.
|
||||||
|
*/
|
||||||
|
#define DLT_JUNIPER_ST 200
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Bluetooth HCI UART transport layer (part H:4), with pseudo-header
|
||||||
|
* that includes direction information; requested by Paolo Abeni.
|
||||||
|
*/
|
||||||
|
#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR 201
|
||||||
|
|
||||||
|
/*
|
||||||
|
* AX.25 packet with a 1-byte KISS header; see
|
||||||
|
*
|
||||||
|
* http://www.ax25.net/kiss.htm
|
||||||
|
*
|
||||||
|
* as per Richard Stearn <richard@rns-stearn.demon.co.uk>.
|
||||||
|
*/
|
||||||
|
#define DLT_AX25_KISS 202
|
||||||
|
|
||||||
|
/*
|
||||||
|
* LAPD packets from an ISDN channel, starting with the address field,
|
||||||
|
* with no pseudo-header.
|
||||||
|
* Requested by Varuna De Silva <varunax@gmail.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_LAPD 203
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Variants of various link-layer headers, with a one-byte direction
|
||||||
|
* pseudo-header prepended - zero means "received by this host",
|
||||||
|
* non-zero (any non-zero value) means "sent by this host" - as per
|
||||||
|
* Will Barker <w.barker@zen.co.uk>.
|
||||||
|
*/
|
||||||
|
#define DLT_PPP_WITH_DIR 204 /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */
|
||||||
|
#define DLT_C_HDLC_WITH_DIR 205 /* Cisco HDLC */
|
||||||
|
#define DLT_FRELAY_WITH_DIR 206 /* Frame Relay */
|
||||||
|
#define DLT_LAPB_WITH_DIR 207 /* LAPB */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* 208 is reserved for an as-yet-unspecified proprietary link-layer
|
||||||
|
* type, as requested by Will Barker.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman
|
||||||
|
* <avn@pigeonpoint.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_IPMB_LINUX 209
|
||||||
|
|
||||||
|
/*
|
||||||
|
* FlexRay automotive bus - http://www.flexray.com/ - as requested
|
||||||
|
* by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
||||||
|
*/
|
||||||
|
#define DLT_FLEXRAY 210
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Media Oriented Systems Transport (MOST) bus for multimedia
|
||||||
|
* transport - http://www.mostcooperation.com/ - as requested
|
||||||
|
* by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
||||||
|
*/
|
||||||
|
#define DLT_MOST 211
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Local Interconnect Network (LIN) bus for vehicle networks -
|
||||||
|
* http://www.lin-subbus.org/ - as requested by Hannes Kaelber
|
||||||
|
* <hannes.kaelber@x2e.de>.
|
||||||
|
*/
|
||||||
|
#define DLT_LIN 212
|
||||||
|
|
||||||
|
/*
|
||||||
|
* X2E-private data link type used for serial line capture,
|
||||||
|
* as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
||||||
|
*/
|
||||||
|
#define DLT_X2E_SERIAL 213
|
||||||
|
|
||||||
|
/*
|
||||||
|
* X2E-private data link type used for the Xoraya data logger
|
||||||
|
* family, as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
||||||
|
*/
|
||||||
|
#define DLT_X2E_XORAYA 214
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IEEE 802.15.4, exactly as it appears in the spec (no padding, no
|
||||||
|
* nothing), but with the PHY-level data for non-ASK PHYs (4 octets
|
||||||
|
* of 0 as preamble, one octet of SFD, one octet of frame length+
|
||||||
|
* reserved bit, and then the MAC-layer data, starting with the
|
||||||
|
* frame control field).
|
||||||
|
*
|
||||||
|
* Requested by Max Filippov <jcmvbkbc@gmail.com>.
|
||||||
|
*/
|
||||||
|
#define DLT_IEEE802_15_4_NONASK_PHY 215
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* DLT and savefile link type values are split into a class and
|
||||||
|
* a member of that class. A class value of 0 indicates a regular
|
||||||
|
* DLT_/LINKTYPE_ value.
|
||||||
|
*/
|
||||||
|
#define DLT_CLASS(x) ((x) & 0x03ff0000)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NetBSD-specific generic "raw" link type. The class value indicates
|
||||||
|
* that this is the generic raw type, and the lower 16 bits are the
|
||||||
|
* address family we're dealing with. Those values are NetBSD-specific;
|
||||||
|
* do not assume that they correspond to AF_ values for your operating
|
||||||
|
* system.
|
||||||
|
*/
|
||||||
|
#define DLT_CLASS_NETBSD_RAWAF 0x02240000
|
||||||
|
#define DLT_NETBSD_RAWAF(af) (DLT_CLASS_NETBSD_RAWAF | (af))
|
||||||
|
#define DLT_NETBSD_RAWAF_AF(x) ((x) & 0x0000ffff)
|
||||||
|
#define DLT_IS_NETBSD_RAWAF(x) (DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF)
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The instruction encodings.
|
||||||
|
*/
|
||||||
|
/* instruction classes */
|
||||||
|
#define BPF_CLASS(code) ((code) & 0x07)
|
||||||
|
#define BPF_LD 0x00
|
||||||
|
#define BPF_LDX 0x01
|
||||||
|
#define BPF_ST 0x02
|
||||||
|
#define BPF_STX 0x03
|
||||||
|
#define BPF_ALU 0x04
|
||||||
|
#define BPF_JMP 0x05
|
||||||
|
#define BPF_RET 0x06
|
||||||
|
#define BPF_MISC 0x07
|
||||||
|
|
||||||
|
/* ld/ldx fields */
|
||||||
|
#define BPF_SIZE(code) ((code) & 0x18)
|
||||||
|
#define BPF_W 0x00
|
||||||
|
#define BPF_H 0x08
|
||||||
|
#define BPF_B 0x10
|
||||||
|
#define BPF_MODE(code) ((code) & 0xe0)
|
||||||
|
#define BPF_IMM 0x00
|
||||||
|
#define BPF_ABS 0x20
|
||||||
|
#define BPF_IND 0x40
|
||||||
|
#define BPF_MEM 0x60
|
||||||
|
#define BPF_LEN 0x80
|
||||||
|
#define BPF_MSH 0xa0
|
||||||
|
|
||||||
|
/* alu/jmp fields */
|
||||||
|
#define BPF_OP(code) ((code) & 0xf0)
|
||||||
|
#define BPF_ADD 0x00
|
||||||
|
#define BPF_SUB 0x10
|
||||||
|
#define BPF_MUL 0x20
|
||||||
|
#define BPF_DIV 0x30
|
||||||
|
#define BPF_OR 0x40
|
||||||
|
#define BPF_AND 0x50
|
||||||
|
#define BPF_LSH 0x60
|
||||||
|
#define BPF_RSH 0x70
|
||||||
|
#define BPF_NEG 0x80
|
||||||
|
#define BPF_JA 0x00
|
||||||
|
#define BPF_JEQ 0x10
|
||||||
|
#define BPF_JGT 0x20
|
||||||
|
#define BPF_JGE 0x30
|
||||||
|
#define BPF_JSET 0x40
|
||||||
|
#define BPF_SRC(code) ((code) & 0x08)
|
||||||
|
#define BPF_K 0x00
|
||||||
|
#define BPF_X 0x08
|
||||||
|
|
||||||
|
/* ret - BPF_K and BPF_X also apply */
|
||||||
|
#define BPF_RVAL(code) ((code) & 0x18)
|
||||||
|
#define BPF_A 0x10
|
||||||
|
|
||||||
|
/* misc */
|
||||||
|
#define BPF_MISCOP(code) ((code) & 0xf8)
|
||||||
|
#define BPF_TAX 0x00
|
||||||
|
#define BPF_TXA 0x80
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The instruction data structure.
|
||||||
|
*/
|
||||||
|
struct bpf_insn {
|
||||||
|
u_short code;
|
||||||
|
u_char jt;
|
||||||
|
u_char jf;
|
||||||
|
bpf_u_int32 k;
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Macros for insn array initializers.
|
||||||
|
*/
|
||||||
|
#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
|
||||||
|
#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
|
||||||
|
|
||||||
|
#if __STDC__ || defined(__cplusplus)
|
||||||
|
extern int bpf_validate(const struct bpf_insn *, int);
|
||||||
|
extern u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int);
|
||||||
|
#else
|
||||||
|
extern int bpf_validate();
|
||||||
|
extern u_int bpf_filter();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
|
||||||
|
*/
|
||||||
|
#define BPF_MEMWORDS 16
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,89 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1994, 1996
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the Computer Systems
|
||||||
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
||||||
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
||||||
|
* to endorse or promote products derived from this software without
|
||||||
|
* specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/namedb.h,v 1.1 2006/10/04 18:09:22 guy Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef lib_pcap_namedb_h
|
||||||
|
#define lib_pcap_namedb_h
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* As returned by the pcap_next_etherent()
|
||||||
|
* XXX this stuff doesn't belong in this interface, but this
|
||||||
|
* library already must do name to address translation, so
|
||||||
|
* on systems that don't have support for /etc/ethers, we
|
||||||
|
* export these hooks since they'll
|
||||||
|
*/
|
||||||
|
struct pcap_etherent {
|
||||||
|
u_char addr[6];
|
||||||
|
char name[122];
|
||||||
|
};
|
||||||
|
#ifndef PCAP_ETHERS_FILE
|
||||||
|
#define PCAP_ETHERS_FILE "/etc/ethers"
|
||||||
|
#endif
|
||||||
|
struct pcap_etherent *pcap_next_etherent(FILE *);
|
||||||
|
u_char *pcap_ether_hostton(const char*);
|
||||||
|
u_char *pcap_ether_aton(const char *);
|
||||||
|
|
||||||
|
bpf_u_int32 **pcap_nametoaddr(const char *);
|
||||||
|
#ifdef INET6
|
||||||
|
struct addrinfo *pcap_nametoaddrinfo(const char *);
|
||||||
|
#endif
|
||||||
|
bpf_u_int32 pcap_nametonetaddr(const char *);
|
||||||
|
|
||||||
|
int pcap_nametoport(const char *, int *, int *);
|
||||||
|
int pcap_nametoportrange(const char *, int *, int *, int *);
|
||||||
|
int pcap_nametoproto(const char *);
|
||||||
|
int pcap_nametoeproto(const char *);
|
||||||
|
int pcap_nametollc(const char *);
|
||||||
|
/*
|
||||||
|
* If a protocol is unknown, PROTO_UNDEF is returned.
|
||||||
|
* Also, pcap_nametoport() returns the protocol along with the port number.
|
||||||
|
* If there are ambiguous entried in /etc/services (i.e. domain
|
||||||
|
* can be either tcp or udp) PROTO_UNDEF is returned.
|
||||||
|
*/
|
||||||
|
#define PROTO_UNDEF -1
|
||||||
|
|
||||||
|
/* XXX move these to pcap-int.h? */
|
||||||
|
int __pcap_atodn(const char *, bpf_u_int32 *);
|
||||||
|
int __pcap_atoin(const char *, bpf_u_int32 *);
|
||||||
|
u_short __pcap_nametodnaddr(const char *);
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,407 @@
|
||||||
|
/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */
|
||||||
|
/*
|
||||||
|
* Copyright (c) 1993, 1994, 1995, 1996, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the Computer Systems
|
||||||
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
||||||
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
||||||
|
* to endorse or promote products derived from this software without
|
||||||
|
* specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/pcap.h,v 1.4.2.11 2008-10-06 15:38:39 gianluca Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef lib_pcap_pcap_h
|
||||||
|
#define lib_pcap_pcap_h
|
||||||
|
|
||||||
|
#if defined(WIN32)
|
||||||
|
#include <pcap-stdinc.h>
|
||||||
|
#elif defined(MSDOS)
|
||||||
|
#include <sys/types.h>
|
||||||
|
#include <sys/socket.h> /* u_int, u_char etc. */
|
||||||
|
#else /* UN*X */
|
||||||
|
#include <sys/types.h>
|
||||||
|
#include <sys/time.h>
|
||||||
|
#endif /* WIN32/MSDOS/UN*X */
|
||||||
|
|
||||||
|
#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H
|
||||||
|
#include <pcap/bpf.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
|
||||||
|
#ifdef HAVE_REMOTE
|
||||||
|
// We have to define the SOCKET here, although it has been defined in sockutils.h
|
||||||
|
// This is to avoid the distribution of the 'sockutils.h' file around
|
||||||
|
// (for example in the WinPcap developer's pack)
|
||||||
|
#ifndef SOCKET
|
||||||
|
#ifdef WIN32
|
||||||
|
#define SOCKET unsigned int
|
||||||
|
#else
|
||||||
|
#define SOCKET int
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define PCAP_VERSION_MAJOR 2
|
||||||
|
#define PCAP_VERSION_MINOR 4
|
||||||
|
|
||||||
|
#define PCAP_ERRBUF_SIZE 256
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Compatibility for systems that have a bpf.h that
|
||||||
|
* predates the bpf typedefs for 64-bit support.
|
||||||
|
*/
|
||||||
|
#if BPF_RELEASE - 0 < 199406
|
||||||
|
typedef int bpf_int32;
|
||||||
|
typedef u_int bpf_u_int32;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
typedef struct pcap pcap_t;
|
||||||
|
typedef struct pcap_dumper pcap_dumper_t;
|
||||||
|
typedef struct pcap_if pcap_if_t;
|
||||||
|
typedef struct pcap_addr pcap_addr_t;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The first record in the file contains saved values for some
|
||||||
|
* of the flags used in the printout phases of tcpdump.
|
||||||
|
* Many fields here are 32 bit ints so compilers won't insert unwanted
|
||||||
|
* padding; these files need to be interchangeable across architectures.
|
||||||
|
*
|
||||||
|
* Do not change the layout of this structure, in any way (this includes
|
||||||
|
* changes that only affect the length of fields in this structure).
|
||||||
|
*
|
||||||
|
* Also, do not change the interpretation of any of the members of this
|
||||||
|
* structure, in any way (this includes using values other than
|
||||||
|
* LINKTYPE_ values, as defined in "savefile.c", in the "linktype"
|
||||||
|
* field).
|
||||||
|
*
|
||||||
|
* Instead:
|
||||||
|
*
|
||||||
|
* introduce a new structure for the new format, if the layout
|
||||||
|
* of the structure changed;
|
||||||
|
*
|
||||||
|
* send mail to "tcpdump-workers@lists.tcpdump.org", requesting
|
||||||
|
* a new magic number for your new capture file format, and, when
|
||||||
|
* you get the new magic number, put it in "savefile.c";
|
||||||
|
*
|
||||||
|
* use that magic number for save files with the changed file
|
||||||
|
* header;
|
||||||
|
*
|
||||||
|
* make the code in "savefile.c" capable of reading files with
|
||||||
|
* the old file header as well as files with the new file header
|
||||||
|
* (using the magic number to determine the header format).
|
||||||
|
*
|
||||||
|
* Then supply the changes as a patch at
|
||||||
|
*
|
||||||
|
* http://sourceforge.net/projects/libpcap/
|
||||||
|
*
|
||||||
|
* so that future versions of libpcap and programs that use it (such as
|
||||||
|
* tcpdump) will be able to read your new capture file format.
|
||||||
|
*/
|
||||||
|
struct pcap_file_header {
|
||||||
|
bpf_u_int32 magic;
|
||||||
|
u_short version_major;
|
||||||
|
u_short version_minor;
|
||||||
|
bpf_int32 thiszone; /* gmt to local correction */
|
||||||
|
bpf_u_int32 sigfigs; /* accuracy of timestamps */
|
||||||
|
bpf_u_int32 snaplen; /* max length saved portion of each pkt */
|
||||||
|
bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Macros for the value returned by pcap_datalink_ext().
|
||||||
|
*
|
||||||
|
* If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro
|
||||||
|
* gives the FCS length of packets in the capture.
|
||||||
|
*/
|
||||||
|
#define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000)
|
||||||
|
#define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28)
|
||||||
|
#define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000)
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
PCAP_D_INOUT = 0,
|
||||||
|
PCAP_D_IN,
|
||||||
|
PCAP_D_OUT
|
||||||
|
} pcap_direction_t;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Generic per-packet information, as supplied by libpcap.
|
||||||
|
*
|
||||||
|
* The time stamp can and should be a "struct timeval", regardless of
|
||||||
|
* whether your system supports 32-bit tv_sec in "struct timeval",
|
||||||
|
* 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit
|
||||||
|
* and 64-bit applications. The on-disk format of savefiles uses 32-bit
|
||||||
|
* tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit
|
||||||
|
* and 64-bit versions of libpcap, even if they're on the same platform,
|
||||||
|
* should supply the appropriate version of "struct timeval", even if
|
||||||
|
* that's not what the underlying packet capture mechanism supplies.
|
||||||
|
*/
|
||||||
|
struct pcap_pkthdr {
|
||||||
|
struct timeval ts; /* time stamp */
|
||||||
|
bpf_u_int32 caplen; /* length of portion present */
|
||||||
|
bpf_u_int32 len; /* length this packet (off wire) */
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* As returned by the pcap_stats()
|
||||||
|
*/
|
||||||
|
struct pcap_stat {
|
||||||
|
u_int ps_recv; /* number of packets received */
|
||||||
|
u_int ps_drop; /* number of packets dropped */
|
||||||
|
u_int ps_ifdrop; /* drops by interface XXX not yet supported */
|
||||||
|
#ifdef HAVE_REMOTE
|
||||||
|
u_int ps_capt; /* number of packets that are received by the application; please get rid off the Win32 ifdef */
|
||||||
|
u_int ps_sent; /* number of packets sent by the server on the network */
|
||||||
|
u_int ps_netdrop; /* number of packets lost on the network */
|
||||||
|
#endif /* HAVE_REMOTE */
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef MSDOS
|
||||||
|
/*
|
||||||
|
* As returned by the pcap_stats_ex()
|
||||||
|
*/
|
||||||
|
struct pcap_stat_ex {
|
||||||
|
u_long rx_packets; /* total packets received */
|
||||||
|
u_long tx_packets; /* total packets transmitted */
|
||||||
|
u_long rx_bytes; /* total bytes received */
|
||||||
|
u_long tx_bytes; /* total bytes transmitted */
|
||||||
|
u_long rx_errors; /* bad packets received */
|
||||||
|
u_long tx_errors; /* packet transmit problems */
|
||||||
|
u_long rx_dropped; /* no space in Rx buffers */
|
||||||
|
u_long tx_dropped; /* no space available for Tx */
|
||||||
|
u_long multicast; /* multicast packets received */
|
||||||
|
u_long collisions;
|
||||||
|
|
||||||
|
/* detailed rx_errors: */
|
||||||
|
u_long rx_length_errors;
|
||||||
|
u_long rx_over_errors; /* receiver ring buff overflow */
|
||||||
|
u_long rx_crc_errors; /* recv'd pkt with crc error */
|
||||||
|
u_long rx_frame_errors; /* recv'd frame alignment error */
|
||||||
|
u_long rx_fifo_errors; /* recv'r fifo overrun */
|
||||||
|
u_long rx_missed_errors; /* recv'r missed packet */
|
||||||
|
|
||||||
|
/* detailed tx_errors */
|
||||||
|
u_long tx_aborted_errors;
|
||||||
|
u_long tx_carrier_errors;
|
||||||
|
u_long tx_fifo_errors;
|
||||||
|
u_long tx_heartbeat_errors;
|
||||||
|
u_long tx_window_errors;
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Item in a list of interfaces.
|
||||||
|
*/
|
||||||
|
struct pcap_if {
|
||||||
|
struct pcap_if *next;
|
||||||
|
char *name; /* name to hand to "pcap_open_live()" */
|
||||||
|
char *description; /* textual description of interface, or NULL */
|
||||||
|
struct pcap_addr *addresses;
|
||||||
|
bpf_u_int32 flags; /* PCAP_IF_ interface flags */
|
||||||
|
};
|
||||||
|
|
||||||
|
#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Representation of an interface address.
|
||||||
|
*/
|
||||||
|
struct pcap_addr {
|
||||||
|
struct pcap_addr *next;
|
||||||
|
struct sockaddr *addr; /* address */
|
||||||
|
struct sockaddr *netmask; /* netmask for that address */
|
||||||
|
struct sockaddr *broadaddr; /* broadcast address for that address */
|
||||||
|
struct sockaddr *dstaddr; /* P2P destination address for that address */
|
||||||
|
};
|
||||||
|
|
||||||
|
typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *,
|
||||||
|
const u_char *);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Error codes for the pcap API.
|
||||||
|
* These will all be negative, so you can check for the success or
|
||||||
|
* failure of a call that returns these codes by checking for a
|
||||||
|
* negative value.
|
||||||
|
*/
|
||||||
|
#define PCAP_ERROR -1 /* generic error code */
|
||||||
|
#define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */
|
||||||
|
#define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */
|
||||||
|
#define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */
|
||||||
|
#define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */
|
||||||
|
#define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */
|
||||||
|
#define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */
|
||||||
|
#define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */
|
||||||
|
#define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Warning codes for the pcap API.
|
||||||
|
* These will all be positive and non-zero, so they won't look like
|
||||||
|
* errors.
|
||||||
|
*/
|
||||||
|
#define PCAP_WARNING 1 /* generic warning code */
|
||||||
|
#define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */
|
||||||
|
|
||||||
|
char *pcap_lookupdev(char *);
|
||||||
|
int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *);
|
||||||
|
|
||||||
|
pcap_t *pcap_create(const char *, char *);
|
||||||
|
int pcap_set_snaplen(pcap_t *, int);
|
||||||
|
int pcap_set_promisc(pcap_t *, int);
|
||||||
|
int pcap_can_set_rfmon(pcap_t *);
|
||||||
|
int pcap_set_rfmon(pcap_t *, int);
|
||||||
|
int pcap_set_timeout(pcap_t *, int);
|
||||||
|
int pcap_set_buffer_size(pcap_t *, int);
|
||||||
|
int pcap_activate(pcap_t *);
|
||||||
|
|
||||||
|
pcap_t *pcap_open_live(const char *, int, int, int, char *);
|
||||||
|
pcap_t *pcap_open_dead(int, int);
|
||||||
|
pcap_t *pcap_open_offline(const char *, char *);
|
||||||
|
#if defined(WIN32)
|
||||||
|
pcap_t *pcap_hopen_offline(intptr_t, char *);
|
||||||
|
#if !defined(LIBPCAP_EXPORTS)
|
||||||
|
#define pcap_fopen_offline(f,b) \
|
||||||
|
pcap_hopen_offline(_get_osfhandle(_fileno(f)), b)
|
||||||
|
#else /*LIBPCAP_EXPORTS*/
|
||||||
|
static pcap_t *pcap_fopen_offline(FILE *, char *);
|
||||||
|
#endif
|
||||||
|
#else /*WIN32*/
|
||||||
|
pcap_t *pcap_fopen_offline(FILE *, char *);
|
||||||
|
#endif /*WIN32*/
|
||||||
|
|
||||||
|
void pcap_close(pcap_t *);
|
||||||
|
int pcap_loop(pcap_t *, int, pcap_handler, u_char *);
|
||||||
|
int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *);
|
||||||
|
const u_char*
|
||||||
|
pcap_next(pcap_t *, struct pcap_pkthdr *);
|
||||||
|
int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **);
|
||||||
|
void pcap_breakloop(pcap_t *);
|
||||||
|
int pcap_stats(pcap_t *, struct pcap_stat *);
|
||||||
|
int pcap_setfilter(pcap_t *, struct bpf_program *);
|
||||||
|
int pcap_setdirection(pcap_t *, pcap_direction_t);
|
||||||
|
int pcap_getnonblock(pcap_t *, char *);
|
||||||
|
int pcap_setnonblock(pcap_t *, int, char *);
|
||||||
|
int pcap_inject(pcap_t *, const void *, size_t);
|
||||||
|
int pcap_sendpacket(pcap_t *, const u_char *, int);
|
||||||
|
const char *pcap_statustostr(int);
|
||||||
|
const char *pcap_strerror(int);
|
||||||
|
char *pcap_geterr(pcap_t *);
|
||||||
|
void pcap_perror(pcap_t *, char *);
|
||||||
|
int pcap_compile(pcap_t *, struct bpf_program *, const char *, int,
|
||||||
|
bpf_u_int32);
|
||||||
|
int pcap_compile_nopcap(int, int, struct bpf_program *,
|
||||||
|
const char *, int, bpf_u_int32);
|
||||||
|
void pcap_freecode(struct bpf_program *);
|
||||||
|
int pcap_offline_filter(struct bpf_program *, const struct pcap_pkthdr *,
|
||||||
|
const u_char *);
|
||||||
|
int pcap_datalink(pcap_t *);
|
||||||
|
int pcap_datalink_ext(pcap_t *);
|
||||||
|
int pcap_list_datalinks(pcap_t *, int **);
|
||||||
|
int pcap_set_datalink(pcap_t *, int);
|
||||||
|
void pcap_free_datalinks(int *);
|
||||||
|
int pcap_datalink_name_to_val(const char *);
|
||||||
|
const char *pcap_datalink_val_to_name(int);
|
||||||
|
const char *pcap_datalink_val_to_description(int);
|
||||||
|
int pcap_snapshot(pcap_t *);
|
||||||
|
int pcap_is_swapped(pcap_t *);
|
||||||
|
int pcap_major_version(pcap_t *);
|
||||||
|
int pcap_minor_version(pcap_t *);
|
||||||
|
|
||||||
|
/* XXX */
|
||||||
|
FILE *pcap_file(pcap_t *);
|
||||||
|
int pcap_fileno(pcap_t *);
|
||||||
|
|
||||||
|
pcap_dumper_t *pcap_dump_open(pcap_t *, const char *);
|
||||||
|
pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp);
|
||||||
|
FILE *pcap_dump_file(pcap_dumper_t *);
|
||||||
|
long pcap_dump_ftell(pcap_dumper_t *);
|
||||||
|
int pcap_dump_flush(pcap_dumper_t *);
|
||||||
|
void pcap_dump_close(pcap_dumper_t *);
|
||||||
|
void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *);
|
||||||
|
|
||||||
|
int pcap_findalldevs(pcap_if_t **, char *);
|
||||||
|
void pcap_freealldevs(pcap_if_t *);
|
||||||
|
|
||||||
|
const char *pcap_lib_version(void);
|
||||||
|
|
||||||
|
/* XXX this guy lives in the bpf tree */
|
||||||
|
u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int);
|
||||||
|
int bpf_validate(const struct bpf_insn *f, int len);
|
||||||
|
char *bpf_image(const struct bpf_insn *, int);
|
||||||
|
void bpf_dump(const struct bpf_program *, int);
|
||||||
|
|
||||||
|
#if defined(WIN32)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Win32 definitions
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcap_setbuff(pcap_t *p, int dim);
|
||||||
|
int pcap_setmode(pcap_t *p, int mode);
|
||||||
|
int pcap_setmintocopy(pcap_t *p, int size);
|
||||||
|
|
||||||
|
#ifdef WPCAP
|
||||||
|
/* Include file with the wpcap-specific extensions */
|
||||||
|
#include <Win32-Extensions.h>
|
||||||
|
#endif /* WPCAP */
|
||||||
|
|
||||||
|
#define MODE_CAPT 0
|
||||||
|
#define MODE_STAT 1
|
||||||
|
#define MODE_MON 2
|
||||||
|
|
||||||
|
#elif defined(MSDOS)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MS-DOS definitions
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *);
|
||||||
|
void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait);
|
||||||
|
u_long pcap_mac_packets (void);
|
||||||
|
|
||||||
|
#else /* UN*X */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* UN*X definitions
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcap_get_selectable_fd(pcap_t *);
|
||||||
|
|
||||||
|
#endif /* WIN32/MSDOS/UN*X */
|
||||||
|
|
||||||
|
#ifdef HAVE_REMOTE
|
||||||
|
/* Includes most of the public stuff that is needed for the remote capture */
|
||||||
|
#include <remote-ext.h>
|
||||||
|
#endif /* HAVE_REMOTE */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,129 @@
|
||||||
|
/*-
|
||||||
|
* Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* This code is derived from the Stanford/CMU enet packet filter,
|
||||||
|
* (net/enet.c) distributed as part of 4.3BSD, and code contributed
|
||||||
|
* to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
|
||||||
|
* Berkeley Laboratory.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the University of
|
||||||
|
* California, Berkeley and its contributors.
|
||||||
|
* 4. Neither the name of the University nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/sll.h,v 1.2.2.1 2008-05-30 01:36:06 guy Exp $ (LBL)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For captures on Linux cooked sockets, we construct a fake header
|
||||||
|
* that includes:
|
||||||
|
*
|
||||||
|
* a 2-byte "packet type" which is one of:
|
||||||
|
*
|
||||||
|
* LINUX_SLL_HOST packet was sent to us
|
||||||
|
* LINUX_SLL_BROADCAST packet was broadcast
|
||||||
|
* LINUX_SLL_MULTICAST packet was multicast
|
||||||
|
* LINUX_SLL_OTHERHOST packet was sent to somebody else
|
||||||
|
* LINUX_SLL_OUTGOING packet was sent *by* us;
|
||||||
|
*
|
||||||
|
* a 2-byte Ethernet protocol field;
|
||||||
|
*
|
||||||
|
* a 2-byte link-layer type;
|
||||||
|
*
|
||||||
|
* a 2-byte link-layer address length;
|
||||||
|
*
|
||||||
|
* an 8-byte source link-layer address, whose actual length is
|
||||||
|
* specified by the previous value.
|
||||||
|
*
|
||||||
|
* All fields except for the link-layer address are in network byte order.
|
||||||
|
*
|
||||||
|
* DO NOT change the layout of this structure, or change any of the
|
||||||
|
* LINUX_SLL_ values below. If you must change the link-layer header
|
||||||
|
* for a "cooked" Linux capture, introduce a new DLT_ type (ask
|
||||||
|
* "tcpdump-workers@lists.tcpdump.org" for one, so that you don't give it
|
||||||
|
* a value that collides with a value already being used), and use the
|
||||||
|
* new header in captures of that type, so that programs that can
|
||||||
|
* handle DLT_LINUX_SLL captures will continue to handle them correctly
|
||||||
|
* without any change, and so that capture files with different headers
|
||||||
|
* can be told apart and programs that read them can dissect the
|
||||||
|
* packets in them.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef lib_pcap_sll_h
|
||||||
|
#define lib_pcap_sll_h
|
||||||
|
|
||||||
|
/*
|
||||||
|
* A DLT_LINUX_SLL fake link-layer header.
|
||||||
|
*/
|
||||||
|
#define SLL_HDR_LEN 16 /* total header length */
|
||||||
|
#define SLL_ADDRLEN 8 /* length of address field */
|
||||||
|
|
||||||
|
struct sll_header {
|
||||||
|
u_int16_t sll_pkttype; /* packet type */
|
||||||
|
u_int16_t sll_hatype; /* link-layer address type */
|
||||||
|
u_int16_t sll_halen; /* link-layer address length */
|
||||||
|
u_int8_t sll_addr[SLL_ADDRLEN]; /* link-layer address */
|
||||||
|
u_int16_t sll_protocol; /* protocol */
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The LINUX_SLL_ values for "sll_pkttype"; these correspond to the
|
||||||
|
* PACKET_ values on Linux, but are defined here so that they're
|
||||||
|
* available even on systems other than Linux, and so that they
|
||||||
|
* don't change even if the PACKET_ values change.
|
||||||
|
*/
|
||||||
|
#define LINUX_SLL_HOST 0
|
||||||
|
#define LINUX_SLL_BROADCAST 1
|
||||||
|
#define LINUX_SLL_MULTICAST 2
|
||||||
|
#define LINUX_SLL_OTHERHOST 3
|
||||||
|
#define LINUX_SLL_OUTGOING 4
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The LINUX_SLL_ values for "sll_protocol"; these correspond to the
|
||||||
|
* ETH_P_ values on Linux, but are defined here so that they're
|
||||||
|
* available even on systems other than Linux. We assume, for now,
|
||||||
|
* that the ETH_P_ values won't change in Linux; if they do, then:
|
||||||
|
*
|
||||||
|
* if we don't translate them in "pcap-linux.c", capture files
|
||||||
|
* won't necessarily be readable if captured on a system that
|
||||||
|
* defines ETH_P_ values that don't match these values;
|
||||||
|
*
|
||||||
|
* if we do translate them in "pcap-linux.c", that makes life
|
||||||
|
* unpleasant for the BPF code generator, as the values you test
|
||||||
|
* for in the kernel aren't the values that you test for when
|
||||||
|
* reading a capture file, so the fixup code run on BPF programs
|
||||||
|
* handed to the kernel ends up having to do more work.
|
||||||
|
*
|
||||||
|
* Add other values here as necessary, for handling packet types that
|
||||||
|
* might show up on non-Ethernet, non-802.x networks. (Not all the ones
|
||||||
|
* in the Linux "if_ether.h" will, I suspect, actually show up in
|
||||||
|
* captures.)
|
||||||
|
*/
|
||||||
|
#define LINUX_SLL_P_802_3 0x0001 /* Novell 802.3 frames without 802.2 LLC header */
|
||||||
|
#define LINUX_SLL_P_802_2 0x0004 /* 802.2 frames (not D/I/X Ethernet) */
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,90 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006 Paolo Abeni (Italy)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. The name of the author may not be used to endorse or promote
|
||||||
|
* products derived from this software without specific prior written
|
||||||
|
* permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* Basic USB data struct
|
||||||
|
* By Paolo Abeni <paolo.abeni@email.it>
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/usb.h,v 1.6 2007/09/22 02:06:08 guy Exp $
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _PCAP_USB_STRUCTS_H__
|
||||||
|
#define _PCAP_USB_STRUCTS_H__
|
||||||
|
|
||||||
|
/*
|
||||||
|
* possible transfer mode
|
||||||
|
*/
|
||||||
|
#define URB_TRANSFER_IN 0x80
|
||||||
|
#define URB_ISOCHRONOUS 0x0
|
||||||
|
#define URB_INTERRUPT 0x1
|
||||||
|
#define URB_CONTROL 0x2
|
||||||
|
#define URB_BULK 0x3
|
||||||
|
|
||||||
|
/*
|
||||||
|
* possible event type
|
||||||
|
*/
|
||||||
|
#define URB_SUBMIT 'S'
|
||||||
|
#define URB_COMPLETE 'C'
|
||||||
|
#define URB_ERROR 'E'
|
||||||
|
|
||||||
|
/*
|
||||||
|
* USB setup header as defined in USB specification.
|
||||||
|
* Appears at the front of each packet in DLT_USB captures.
|
||||||
|
*/
|
||||||
|
typedef struct _usb_setup {
|
||||||
|
u_int8_t bmRequestType;
|
||||||
|
u_int8_t bRequest;
|
||||||
|
u_int16_t wValue;
|
||||||
|
u_int16_t wIndex;
|
||||||
|
u_int16_t wLength;
|
||||||
|
} pcap_usb_setup;
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Header prepended by linux kernel to each event.
|
||||||
|
* Appears at the front of each packet in DLT_USB_LINUX captures.
|
||||||
|
*/
|
||||||
|
typedef struct _usb_header {
|
||||||
|
u_int64_t id;
|
||||||
|
u_int8_t event_type;
|
||||||
|
u_int8_t transfer_type;
|
||||||
|
u_int8_t endpoint_number;
|
||||||
|
u_int8_t device_address;
|
||||||
|
u_int16_t bus_id;
|
||||||
|
char setup_flag;/*if !=0 the urb setup header is not present*/
|
||||||
|
char data_flag; /*if !=0 no urb data is present*/
|
||||||
|
int64_t ts_sec;
|
||||||
|
int32_t ts_usec;
|
||||||
|
int32_t status;
|
||||||
|
u_int32_t urb_len;
|
||||||
|
u_int32_t data_len; /* amount of urb data really present in this event*/
|
||||||
|
pcap_usb_setup setup;
|
||||||
|
} pcap_usb_header;
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,46 @@
|
||||||
|
/*-
|
||||||
|
* Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
|
||||||
|
* The Regents of the University of California. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. All advertising materials mentioning features or use of this software
|
||||||
|
* must display the following acknowledgement:
|
||||||
|
* This product includes software developed by the University of
|
||||||
|
* California, Berkeley and its contributors.
|
||||||
|
* 4. Neither the name of the University nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* @(#) $Header: /tcpdump/master/libpcap/pcap/vlan.h,v 1.1.2.2 2008-08-06 07:45:59 guy Exp $
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef lib_pcap_vlan_h
|
||||||
|
#define lib_pcap_vlan_h
|
||||||
|
|
||||||
|
struct vlan_tag {
|
||||||
|
u_int16_t vlan_tpid; /* ETH_P_8021Q */
|
||||||
|
u_int16_t vlan_tci; /* VLAN TCI */
|
||||||
|
};
|
||||||
|
|
||||||
|
#define VLAN_TAG_LEN 4
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,444 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2002 - 2003
|
||||||
|
* NetGroup, Politecnico di Torino (Italy)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Politecnico di Torino nor the names of its
|
||||||
|
* contributors may be used to endorse or promote products derived from
|
||||||
|
* this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef __REMOTE_EXT_H__
|
||||||
|
#define __REMOTE_EXT_H__
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef HAVE_REMOTE
|
||||||
|
#error Please do not include this file directly. Just define HAVE_REMOTE and then include pcap.h
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Definition for Microsoft Visual Studio
|
||||||
|
#if _MSC_VER > 1000
|
||||||
|
#pragma once
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\file remote-ext.h
|
||||||
|
|
||||||
|
The goal of this file it to include most of the new definitions that should be
|
||||||
|
placed into the pcap.h file.
|
||||||
|
|
||||||
|
It includes all new definitions (structures and functions like pcap_open().
|
||||||
|
Some of the functions are not really a remote feature, but, right now,
|
||||||
|
they are placed here.
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// All this stuff is public
|
||||||
|
/*! \addtogroup remote_struct
|
||||||
|
\{
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Defines the maximum buffer size in which address, port, interface names are kept.
|
||||||
|
|
||||||
|
In case the adapter name or such is larger than this value, it is truncated.
|
||||||
|
This is not used by the user; however it must be aware that an hostname / interface
|
||||||
|
name longer than this value will be truncated.
|
||||||
|
*/
|
||||||
|
#define PCAP_BUF_SIZE 1024
|
||||||
|
|
||||||
|
|
||||||
|
/*! \addtogroup remote_source_ID
|
||||||
|
\{
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Internal representation of the type of source in use (file,
|
||||||
|
remote/local interface).
|
||||||
|
|
||||||
|
This indicates a file, i.e. the user want to open a capture from a local file.
|
||||||
|
*/
|
||||||
|
#define PCAP_SRC_FILE 2
|
||||||
|
/*!
|
||||||
|
\brief Internal representation of the type of source in use (file,
|
||||||
|
remote/local interface).
|
||||||
|
|
||||||
|
This indicates a local interface, i.e. the user want to open a capture from
|
||||||
|
a local interface. This does not involve the RPCAP protocol.
|
||||||
|
*/
|
||||||
|
#define PCAP_SRC_IFLOCAL 3
|
||||||
|
/*!
|
||||||
|
\brief Internal representation of the type of source in use (file,
|
||||||
|
remote/local interface).
|
||||||
|
|
||||||
|
This indicates a remote interface, i.e. the user want to open a capture from
|
||||||
|
an interface on a remote host. This does involve the RPCAP protocol.
|
||||||
|
*/
|
||||||
|
#define PCAP_SRC_IFREMOTE 4
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*! \addtogroup remote_source_string
|
||||||
|
|
||||||
|
The formats allowed by the pcap_open() are the following:
|
||||||
|
- file://path_and_filename [opens a local file]
|
||||||
|
- rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol]
|
||||||
|
- rpcap://host/devicename [opens the selected device available on a remote host]
|
||||||
|
- rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP]
|
||||||
|
- adaptername [to open a local adapter; kept for compability, but it is strongly discouraged]
|
||||||
|
- (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged]
|
||||||
|
|
||||||
|
The formats allowed by the pcap_findalldevs_ex() are the following:
|
||||||
|
- file://folder/ [lists all the files in the given folder]
|
||||||
|
- rpcap:// [lists all local adapters]
|
||||||
|
- rpcap://host:port/ [lists the devices available on a remote host]
|
||||||
|
|
||||||
|
Referring to the 'host' and 'port' paramters, they can be either numeric or literal. Since
|
||||||
|
IPv6 is fully supported, these are the allowed formats:
|
||||||
|
|
||||||
|
- host (literal): e.g. host.foo.bar
|
||||||
|
- host (numeric IPv4): e.g. 10.11.12.13
|
||||||
|
- host (numeric IPv4, IPv6 style): e.g. [10.11.12.13]
|
||||||
|
- host (numeric IPv6): e.g. [1:2:3::4]
|
||||||
|
- port: can be either numeric (e.g. '80') or literal (e.g. 'http')
|
||||||
|
|
||||||
|
Here you find some allowed examples:
|
||||||
|
- rpcap://host.foo.bar/devicename [everything literal, no port number]
|
||||||
|
- rpcap://host.foo.bar:1234/devicename [everything literal, with port number]
|
||||||
|
- rpcap://10.11.12.13/devicename [IPv4 numeric, no port number]
|
||||||
|
- rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number]
|
||||||
|
- rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number]
|
||||||
|
- rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number]
|
||||||
|
- rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number]
|
||||||
|
- rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number]
|
||||||
|
|
||||||
|
\{
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief String that will be used to determine the type of source in use (file,
|
||||||
|
remote/local interface).
|
||||||
|
|
||||||
|
This string will be prepended to the interface name in order to create a string
|
||||||
|
that contains all the information required to open the source.
|
||||||
|
|
||||||
|
This string indicates that the user wants to open a capture from a local file.
|
||||||
|
*/
|
||||||
|
#define PCAP_SRC_FILE_STRING "file://"
|
||||||
|
/*!
|
||||||
|
\brief String that will be used to determine the type of source in use (file,
|
||||||
|
remote/local interface).
|
||||||
|
|
||||||
|
This string will be prepended to the interface name in order to create a string
|
||||||
|
that contains all the information required to open the source.
|
||||||
|
|
||||||
|
This string indicates that the user wants to open a capture from a network interface.
|
||||||
|
This string does not necessarily involve the use of the RPCAP protocol. If the
|
||||||
|
interface required resides on the local host, the RPCAP protocol is not involved
|
||||||
|
and the local functions are used.
|
||||||
|
*/
|
||||||
|
#define PCAP_SRC_IF_STRING "rpcap://"
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\addtogroup remote_open_flags
|
||||||
|
\{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Defines if the adapter has to go in promiscuous mode.
|
||||||
|
|
||||||
|
It is '1' if you have to open the adapter in promiscuous mode, '0' otherwise.
|
||||||
|
Note that even if this parameter is false, the interface could well be in promiscuous
|
||||||
|
mode for some other reason (for example because another capture process with
|
||||||
|
promiscuous mode enabled is currently using that interface).
|
||||||
|
On on Linux systems with 2.2 or later kernels (that have the "any" device), this
|
||||||
|
flag does not work on the "any" device; if an argument of "any" is supplied,
|
||||||
|
the 'promisc' flag is ignored.
|
||||||
|
*/
|
||||||
|
#define PCAP_OPENFLAG_PROMISCUOUS 1
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Defines if the data trasfer (in case of a remote
|
||||||
|
capture) has to be done with UDP protocol.
|
||||||
|
|
||||||
|
If it is '1' if you want a UDP data connection, '0' if you want
|
||||||
|
a TCP data connection; control connection is always TCP-based.
|
||||||
|
A UDP connection is much lighter, but it does not guarantee that all
|
||||||
|
the captured packets arrive to the client workstation. Moreover,
|
||||||
|
it could be harmful in case of network congestion.
|
||||||
|
This flag is meaningless if the source is not a remote interface.
|
||||||
|
In that case, it is simply ignored.
|
||||||
|
*/
|
||||||
|
#define PCAP_OPENFLAG_DATATX_UDP 2
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Defines if the remote probe will capture its own generated traffic.
|
||||||
|
|
||||||
|
In case the remote probe uses the same interface to capture traffic and to send
|
||||||
|
data back to the caller, the captured traffic includes the RPCAP traffic as well.
|
||||||
|
If this flag is turned on, the RPCAP traffic is excluded from the capture, so that
|
||||||
|
the trace returned back to the collector is does not include this traffic.
|
||||||
|
*/
|
||||||
|
#define PCAP_OPENFLAG_NOCAPTURE_RPCAP 4
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief Defines if the local adapter will capture its own generated traffic.
|
||||||
|
|
||||||
|
This flag tells the underlying capture driver to drop the packets that were sent by itself.
|
||||||
|
This is usefult when building applications like bridges, that should ignore the traffic
|
||||||
|
they just sent.
|
||||||
|
*/
|
||||||
|
#define PCAP_OPENFLAG_NOCAPTURE_LOCAL 8
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief This flag configures the adapter for maximum responsiveness.
|
||||||
|
|
||||||
|
In presence of a large value for nbytes, WinPcap waits for the arrival of several packets before
|
||||||
|
copying the data to the user. This guarantees a low number of system calls, i.e. lower processor usage,
|
||||||
|
i.e. better performance, which is good for applications like sniffers. If the user sets the
|
||||||
|
PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will copy the packets as soon as the application
|
||||||
|
is ready to receive them. This is suggested for real time applications (like, for example, a bridge)
|
||||||
|
that need the best responsiveness.*/
|
||||||
|
#define PCAP_OPENFLAG_MAX_RESPONSIVENESS 16
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\addtogroup remote_samp_methods
|
||||||
|
\{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief No sampling has to be done on the current capture.
|
||||||
|
|
||||||
|
In this case, no sampling algorithms are applied to the current capture.
|
||||||
|
*/
|
||||||
|
#define PCAP_SAMP_NOSAMP 0
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief It defines that only 1 out of N packets must be returned to the user.
|
||||||
|
|
||||||
|
In this case, the 'value' field of the 'pcap_samp' structure indicates the
|
||||||
|
number of packets (minus 1) that must be discarded before one packet got accepted.
|
||||||
|
In other words, if 'value = 10', the first packet is returned to the caller, while
|
||||||
|
the following 9 are discarded.
|
||||||
|
*/
|
||||||
|
#define PCAP_SAMP_1_EVERY_N 1
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief It defines that we have to return 1 packet every N milliseconds.
|
||||||
|
|
||||||
|
In this case, the 'value' field of the 'pcap_samp' structure indicates the 'waiting
|
||||||
|
time' in milliseconds before one packet got accepted.
|
||||||
|
In other words, if 'value = 10', the first packet is returned to the caller; the next
|
||||||
|
returned one will be the first packet that arrives when 10ms have elapsed.
|
||||||
|
*/
|
||||||
|
#define PCAP_SAMP_FIRST_AFTER_N_MS 2
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\addtogroup remote_auth_methods
|
||||||
|
\{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief It defines the NULL authentication.
|
||||||
|
|
||||||
|
This value has to be used within the 'type' member of the pcap_rmtauth structure.
|
||||||
|
The 'NULL' authentication has to be equal to 'zero', so that old applications
|
||||||
|
can just put every field of struct pcap_rmtauth to zero, and it does work.
|
||||||
|
*/
|
||||||
|
#define RPCAP_RMTAUTH_NULL 0
|
||||||
|
/*!
|
||||||
|
\brief It defines the username/password authentication.
|
||||||
|
|
||||||
|
With this type of authentication, the RPCAP protocol will use the username/
|
||||||
|
password provided to authenticate the user on the remote machine. If the
|
||||||
|
authentication is successful (and the user has the right to open network devices)
|
||||||
|
the RPCAP connection will continue; otherwise it will be dropped.
|
||||||
|
|
||||||
|
This value has to be used within the 'type' member of the pcap_rmtauth structure.
|
||||||
|
*/
|
||||||
|
#define RPCAP_RMTAUTH_PWD 1
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
|
||||||
|
\brief This structure keeps the information needed to autheticate
|
||||||
|
the user on a remote machine.
|
||||||
|
|
||||||
|
The remote machine can either grant or refuse the access according
|
||||||
|
to the information provided.
|
||||||
|
In case the NULL authentication is required, both 'username' and
|
||||||
|
'password' can be NULL pointers.
|
||||||
|
|
||||||
|
This structure is meaningless if the source is not a remote interface;
|
||||||
|
in that case, the functions which requires such a structure can accept
|
||||||
|
a NULL pointer as well.
|
||||||
|
*/
|
||||||
|
struct pcap_rmtauth
|
||||||
|
{
|
||||||
|
/*!
|
||||||
|
\brief Type of the authentication required.
|
||||||
|
|
||||||
|
In order to provide maximum flexibility, we can support different types
|
||||||
|
of authentication based on the value of this 'type' variable. The currently
|
||||||
|
supported authentication methods are defined into the
|
||||||
|
\link remote_auth_methods Remote Authentication Methods Section\endlink.
|
||||||
|
|
||||||
|
*/
|
||||||
|
int type;
|
||||||
|
/*!
|
||||||
|
\brief Zero-terminated string containing the username that has to be
|
||||||
|
used on the remote machine for authentication.
|
||||||
|
|
||||||
|
This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
|
||||||
|
and it can be NULL.
|
||||||
|
*/
|
||||||
|
char *username;
|
||||||
|
/*!
|
||||||
|
\brief Zero-terminated string containing the password that has to be
|
||||||
|
used on the remote machine for authentication.
|
||||||
|
|
||||||
|
This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
|
||||||
|
and it can be NULL.
|
||||||
|
*/
|
||||||
|
char *password;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\brief This structure defines the information related to sampling.
|
||||||
|
|
||||||
|
In case the sampling is requested, the capturing device should read
|
||||||
|
only a subset of the packets coming from the source. The returned packets depend
|
||||||
|
on the sampling parameters.
|
||||||
|
|
||||||
|
\warning The sampling process is applied <strong>after</strong> the filtering process.
|
||||||
|
In other words, packets are filtered first, then the sampling process selects a
|
||||||
|
subset of the 'filtered' packets and it returns them to the caller.
|
||||||
|
*/
|
||||||
|
struct pcap_samp
|
||||||
|
{
|
||||||
|
/*!
|
||||||
|
Method used for sampling. Currently, the supported methods are listed in the
|
||||||
|
\link remote_samp_methods Sampling Methods Section\endlink.
|
||||||
|
*/
|
||||||
|
int method;
|
||||||
|
|
||||||
|
/*!
|
||||||
|
This value depends on the sampling method defined. For its meaning, please check
|
||||||
|
at the \link remote_samp_methods Sampling Methods Section\endlink.
|
||||||
|
*/
|
||||||
|
int value;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
//! Maximum lenght of an host name (needed for the RPCAP active mode)
|
||||||
|
#define RPCAP_HOSTLIST_SIZE 1024
|
||||||
|
|
||||||
|
|
||||||
|
/*!
|
||||||
|
\}
|
||||||
|
*/ // end of public documentation
|
||||||
|
|
||||||
|
|
||||||
|
// Exported functions
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/** \name New WinPcap functions
|
||||||
|
|
||||||
|
This section lists the new functions that are able to help considerably in writing
|
||||||
|
WinPcap programs because of their easiness of use.
|
||||||
|
*/
|
||||||
|
//\{
|
||||||
|
pcap_t *pcap_open(const char *source, int snaplen, int flags, int read_timeout, struct pcap_rmtauth *auth, char *errbuf);
|
||||||
|
int pcap_createsrcstr(char *source, int type, const char *host, const char *port, const char *name, char *errbuf);
|
||||||
|
int pcap_parsesrcstr(const char *source, int *type, char *host, char *port, char *name, char *errbuf);
|
||||||
|
int pcap_findalldevs_ex(char *source, struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf);
|
||||||
|
struct pcap_samp *pcap_setsampling(pcap_t *p);
|
||||||
|
|
||||||
|
//\}
|
||||||
|
// End of new winpcap functions
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/** \name Remote Capture functions
|
||||||
|
*/
|
||||||
|
//\{
|
||||||
|
SOCKET pcap_remoteact_accept(const char *address, const char *port, const char *hostlist, char *connectinghost, struct pcap_rmtauth *auth, char *errbuf);
|
||||||
|
int pcap_remoteact_list(char *hostlist, char sep, int size, char *errbuf);
|
||||||
|
int pcap_remoteact_close(const char *host, char *errbuf);
|
||||||
|
void pcap_remoteact_cleanup();
|
||||||
|
//\}
|
||||||
|
// End of remote capture functions
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
@ -0,0 +1,13 @@
|
||||||
|
from building import *
|
||||||
|
|
||||||
|
cwd = GetCurrentDir()
|
||||||
|
src = Glob('*.c')
|
||||||
|
|
||||||
|
CPPPATH = [cwd + '/Include']
|
||||||
|
LIBPATH = [cwd + '/Lib']
|
||||||
|
CPPDEFINES = ['WIN32']
|
||||||
|
LIBS = ['wpcap']
|
||||||
|
|
||||||
|
group = DefineGroup('Pcap', src, depend = ['RT_USING_LWIP'], CPPPATH = CPPPATH, LIBPATH=LIBPATH, CPPDEFINES=CPPDEFINES, LIBS=LIBS)
|
||||||
|
|
||||||
|
Return('group')
|
|
@ -0,0 +1,280 @@
|
||||||
|
#ifdef _TIME_T_DEFINED
|
||||||
|
#undef _TIME_T_DEFINED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef _MSC_VER
|
||||||
|
/*
|
||||||
|
* we do not want the warnings about the old deprecated and unsecure CRT functions
|
||||||
|
* since these examples can be compiled under *nix as well
|
||||||
|
*/
|
||||||
|
#define _CRT_SECURE_NO_WARNINGS
|
||||||
|
#endif
|
||||||
|
#include <pcap.h>
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <netif/ethernetif.h>
|
||||||
|
|
||||||
|
#define MAX_ADDR_LEN 6
|
||||||
|
|
||||||
|
#define NETIF_DEVICE(netif) ((struct pcap_netif*)(netif))
|
||||||
|
#define NETIF_PCAP(netif) (NETIF_DEVICE(netif)->tap)
|
||||||
|
|
||||||
|
struct pcap_netif
|
||||||
|
{
|
||||||
|
/* inherit from ethernet device */
|
||||||
|
struct eth_device parent;
|
||||||
|
|
||||||
|
pcap_t *tap;
|
||||||
|
/* interface address info. */
|
||||||
|
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
|
||||||
|
};
|
||||||
|
static struct pcap_netif pcap_netif_device;
|
||||||
|
static struct rt_semaphore sem_lock;
|
||||||
|
static rt_mailbox_t packet_mb = RT_NULL;
|
||||||
|
|
||||||
|
static void pcap_thread_entry(void* parameter)
|
||||||
|
{
|
||||||
|
pcap_if_t *netif;
|
||||||
|
pcap_t *tap;
|
||||||
|
char errbuf[PCAP_ERRBUF_SIZE];
|
||||||
|
struct pcap_pkthdr *header;
|
||||||
|
const u_char *pkt_data;
|
||||||
|
int res;
|
||||||
|
|
||||||
|
netif = (pcap_if_t *) parameter;
|
||||||
|
|
||||||
|
/* Open the adapter */
|
||||||
|
if ((tap = pcap_open_live(netif->name,
|
||||||
|
65536, // portion of the packet to capture.
|
||||||
|
1, // promiscuous mode (nonzero means promiscuous)
|
||||||
|
1, // read timeout, 0 blocked, -1 no timeout
|
||||||
|
errbuf )) == NULL)
|
||||||
|
{
|
||||||
|
rt_kprintf("Unable to open the adapter. %s is not supported by WinPcap\n", netif->name);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
NETIF_PCAP(&pcap_netif_device) = tap;
|
||||||
|
|
||||||
|
// pcap_loop(tap, 0, packet_handler, NULL);
|
||||||
|
/* Read the packets */
|
||||||
|
while((res = pcap_next_ex(tap, &header, &pkt_data)) >= 0)
|
||||||
|
{
|
||||||
|
struct eth_device* eth;
|
||||||
|
struct pbuf *p;
|
||||||
|
|
||||||
|
if (res == 0) continue;
|
||||||
|
|
||||||
|
eth = (struct eth_device*) &pcap_netif_device;
|
||||||
|
|
||||||
|
p = pbuf_alloc(PBUF_LINK, header->len, PBUF_RAM);
|
||||||
|
pbuf_take(p, pkt_data, header->len);
|
||||||
|
|
||||||
|
/* send to packet mailbox */
|
||||||
|
rt_mb_send_wait(packet_mb, (rt_uint32_t)p, RT_WAITING_FOREVER);
|
||||||
|
/* notify eth rx thread to receive packet */
|
||||||
|
eth_device_ready(eth);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t pcap_netif_init(rt_device_t dev)
|
||||||
|
{
|
||||||
|
rt_thread_t tid;
|
||||||
|
pcap_if_t *alldevs;
|
||||||
|
pcap_if_t *d;
|
||||||
|
pcap_t *tap;
|
||||||
|
int inum, i=0;
|
||||||
|
char errbuf[PCAP_ERRBUF_SIZE];
|
||||||
|
|
||||||
|
/* Retrieve the device list */
|
||||||
|
if(pcap_findalldevs(&alldevs, errbuf) == -1)
|
||||||
|
{
|
||||||
|
rt_kprintf("Error in pcap_findalldevs: %s\n", errbuf);
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Print the list */
|
||||||
|
for(d = alldevs; d; d = d->next)
|
||||||
|
{
|
||||||
|
rt_kprintf("%d. %s", ++i, d->name);
|
||||||
|
if (d->description)
|
||||||
|
rt_kprintf(" (%s)\n", d->description);
|
||||||
|
else
|
||||||
|
rt_kprintf(" (No description available)\n");
|
||||||
|
}
|
||||||
|
if(i == 0)
|
||||||
|
{
|
||||||
|
rt_kprintf("\nNo interfaces found! Make sure WinPcap is installed.\n");
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
inum = 1;
|
||||||
|
/* Jump to the selected adapter */
|
||||||
|
for(d = alldevs, i = 0; i < inum-1 ;d = d->next, i++);
|
||||||
|
|
||||||
|
{
|
||||||
|
packet_mb = rt_mb_create("pcap", 64, RT_IPC_FLAG_FIFO);
|
||||||
|
tid = rt_thread_create("pcap", pcap_thread_entry, d,
|
||||||
|
2048, RT_THREAD_PRIORITY_MAX - 1, 10);
|
||||||
|
if (tid != RT_NULL)
|
||||||
|
{
|
||||||
|
rt_thread_startup(tid);
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_thread_delay(100);
|
||||||
|
}
|
||||||
|
|
||||||
|
pcap_freealldevs(alldevs);
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t pcap_netif_open(rt_device_t dev, rt_uint16_t oflag)
|
||||||
|
{
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t pcap_netif_close(rt_device_t dev)
|
||||||
|
{
|
||||||
|
pcap_t *tap;
|
||||||
|
|
||||||
|
tap = NETIF_PCAP(dev);
|
||||||
|
|
||||||
|
pcap_close(tap);
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_size_t pcap_netif_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
|
||||||
|
{
|
||||||
|
rt_set_errno(-RT_ENOSYS);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_size_t pcap_netif_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
|
||||||
|
{
|
||||||
|
rt_set_errno(-RT_ENOSYS);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t pcap_netif_control(rt_device_t dev, rt_uint8_t cmd, void *args)
|
||||||
|
{
|
||||||
|
switch (cmd)
|
||||||
|
{
|
||||||
|
case NIOCTL_GADDR:
|
||||||
|
/* get mac address */
|
||||||
|
if (args) rt_memcpy(args, pcap_netif_device.dev_addr, 6);
|
||||||
|
else return -RT_ERROR;
|
||||||
|
break;
|
||||||
|
|
||||||
|
default :
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_err_t pcap_netif_tx( rt_device_t dev, struct pbuf* p)
|
||||||
|
{
|
||||||
|
struct pbuf *q;
|
||||||
|
rt_uint8_t *ptr;
|
||||||
|
rt_uint8_t buf[2048];
|
||||||
|
rt_err_t result = RT_EOK;
|
||||||
|
pcap_t *tap;
|
||||||
|
|
||||||
|
tap = NETIF_PCAP(dev);
|
||||||
|
|
||||||
|
/* lock EMAC device */
|
||||||
|
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
|
||||||
|
|
||||||
|
/* copy data to tx buffer */
|
||||||
|
q = p;
|
||||||
|
ptr = (rt_uint8_t*)buf;
|
||||||
|
while (q)
|
||||||
|
{
|
||||||
|
memcpy(ptr, q->payload, q->len);
|
||||||
|
ptr += q->len;
|
||||||
|
q = q->next;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (pcap_sendpacket(tap, buf, p->tot_len) != 0)
|
||||||
|
{
|
||||||
|
rt_kprintf("Error sending the packet: \n", pcap_geterr(tap));
|
||||||
|
result = -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* unlock EMAC device */
|
||||||
|
rt_sem_release(&sem_lock);
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
struct pbuf *pcap_netif_rx(rt_device_t dev)
|
||||||
|
{
|
||||||
|
struct pbuf* p = RT_NULL;
|
||||||
|
|
||||||
|
rt_mb_recv(packet_mb, (rt_uint32_t*)&p, 0);
|
||||||
|
|
||||||
|
return p;
|
||||||
|
}
|
||||||
|
|
||||||
|
void pcap_netif_hw_init(void)
|
||||||
|
{
|
||||||
|
rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);
|
||||||
|
|
||||||
|
pcap_netif_device.dev_addr[0] = 0x00;
|
||||||
|
pcap_netif_device.dev_addr[1] = 0x60;
|
||||||
|
pcap_netif_device.dev_addr[2] = 0x37;
|
||||||
|
/* set mac address: (only for test) */
|
||||||
|
pcap_netif_device.dev_addr[3] = 0x12;
|
||||||
|
pcap_netif_device.dev_addr[4] = 0x34;
|
||||||
|
pcap_netif_device.dev_addr[5] = 0x56;
|
||||||
|
|
||||||
|
pcap_netif_device.parent.parent.init = pcap_netif_init;
|
||||||
|
pcap_netif_device.parent.parent.open = pcap_netif_open;
|
||||||
|
pcap_netif_device.parent.parent.close = pcap_netif_close;
|
||||||
|
pcap_netif_device.parent.parent.read = pcap_netif_read;
|
||||||
|
pcap_netif_device.parent.parent.write = pcap_netif_write;
|
||||||
|
pcap_netif_device.parent.parent.control = pcap_netif_control;
|
||||||
|
pcap_netif_device.parent.parent.user_data = RT_NULL;
|
||||||
|
|
||||||
|
pcap_netif_device.parent.eth_rx = pcap_netif_rx;
|
||||||
|
pcap_netif_device.parent.eth_tx = pcap_netif_tx;
|
||||||
|
|
||||||
|
eth_device_init(&(pcap_netif_device.parent), "e0");
|
||||||
|
}
|
||||||
|
|
||||||
|
#include <finsh.h>
|
||||||
|
void list_pcap(void)
|
||||||
|
{
|
||||||
|
int i=0;
|
||||||
|
pcap_if_t *alldevs;
|
||||||
|
pcap_if_t *d;
|
||||||
|
char errbuf[PCAP_ERRBUF_SIZE];
|
||||||
|
|
||||||
|
/* Retrieve the device list */
|
||||||
|
if(pcap_findalldevs(&alldevs, errbuf) == -1)
|
||||||
|
{
|
||||||
|
rt_kprintf("Error in pcap_findalldevs: %s\n", errbuf);
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Print the list */
|
||||||
|
for(d = alldevs; d; d = d->next)
|
||||||
|
{
|
||||||
|
rt_kprintf("%d. %s", ++i, d->name);
|
||||||
|
if (d->description)
|
||||||
|
rt_kprintf(" (%s)\n", d->description);
|
||||||
|
else
|
||||||
|
rt_kprintf(" (No description available)\n");
|
||||||
|
}
|
||||||
|
if(i == 0)
|
||||||
|
{
|
||||||
|
rt_kprintf("\nNo interfaces found! Make sure WinPcap is installed.\n");
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
pcap_freealldevs(alldevs);
|
||||||
|
|
||||||
|
return ;
|
||||||
|
}
|
||||||
|
FINSH_FUNCTION_EXPORT(list_pcap, show host netif adapter);
|
|
@ -109,7 +109,7 @@
|
||||||
#define DFS_FD_MAX 4
|
#define DFS_FD_MAX 4
|
||||||
|
|
||||||
/* SECTION: lwip, a lighwight TCP/IP protocol stack */
|
/* SECTION: lwip, a lighwight TCP/IP protocol stack */
|
||||||
/* #define RT_USING_LWIP */
|
#define RT_USING_LWIP
|
||||||
/* LwIP uses RT-Thread Memory Management */
|
/* LwIP uses RT-Thread Memory Management */
|
||||||
#define RT_LWIP_USING_RT_MEM
|
#define RT_LWIP_USING_RT_MEM
|
||||||
/* Enable ICMP protocol*/
|
/* Enable ICMP protocol*/
|
||||||
|
|
Loading…
Reference in New Issue