diff --git a/bsp/stm32f10x-HAL/applications/main.c b/bsp/stm32f10x-HAL/applications/main.c
index ae855a5b1..0f5e6000a 100644
--- a/bsp/stm32f10x-HAL/applications/main.c
+++ b/bsp/stm32f10x-HAL/applications/main.c
@@ -15,6 +15,6 @@
int main(void)
{
- /* user app entry */
- return 0;
+ /* user app entry */
+ return 0;
}
diff --git a/bsp/stm32f10x-HAL/drivers/board.c b/bsp/stm32f10x-HAL/drivers/board.c
index 3ff64ed3d..d52041198 100644
--- a/bsp/stm32f10x-HAL/drivers/board.c
+++ b/bsp/stm32f10x-HAL/drivers/board.c
@@ -24,12 +24,9 @@
/*@{*/
-
void HAL_MspInit(void)
{
-
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
-
/* System interrupt init*/
__HAL_RCC_AFIO_CLK_ENABLE();
/* MemoryManagement_IRQn interrupt configuration */
@@ -46,16 +43,14 @@ void HAL_MspInit(void)
HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
/* SysTick_IRQn interrupt configuration */
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
-
/**DISABLE: JTAG-DP Disabled and SW-DP Disabled**/
__HAL_AFIO_REMAP_SWJ_NOJTAG();
}
+
void SystemClock_Config(void)
{
-
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_ClkInitTypeDef RCC_ClkInitStruct;
-
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
@@ -73,22 +68,17 @@ void SystemClock_Config(void)
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-
RT_ASSERT(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK);
-
/**Configure the Systick interrupt time
*/
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / RT_TICK_PER_SECOND);
-
/**Configure the Systick
*/
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
-
/* SysTick_IRQn interrupt configuration */
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
}
-
/**
* This is the timer interrupt service routine.
*
@@ -97,10 +87,8 @@ void SysTick_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
-
HAL_IncTick();
rt_tick_increase();
-
/* leave interrupt */
rt_interrupt_leave();
}
@@ -115,15 +103,10 @@ void rt_hw_board_init(void)
#ifdef RT_USING_HEAP
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
#endif
-
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
-
#ifdef RT_USING_CONSOLE
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
-
}
-
-/*@}*/
diff --git a/bsp/stm32f10x-HAL/drivers/board.h b/bsp/stm32f10x-HAL/drivers/board.h
index 617b27586..731dc67a4 100644
--- a/bsp/stm32f10x-HAL/drivers/board.h
+++ b/bsp/stm32f10x-HAL/drivers/board.h
@@ -197,7 +197,6 @@
#define STM32_SRAM_SIZE 64
//#define STM32F107xC
#endif
-
/* whether use board external SRAM memory */
// Use external SRAM memory on the board
// Enable External SRAM memory
@@ -209,10 +208,8 @@
// Default: 0x68080000
#define STM32_EXT_SRAM_END 0x68080000 /* the end address of external SRAM */
//
-
// Internal SRAM memory size[Kbytes] <8-64>
// Default: 64
-
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
diff --git a/bsp/stm32f10x-HAL/drivers/drv_gpio.c b/bsp/stm32f10x-HAL/drivers/drv_gpio.c
index a61f5ab2a..6a0db7401 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_gpio.c
+++ b/bsp/stm32f10x-HAL/drivers/drv_gpio.c
@@ -18,7 +18,6 @@
#include
#include
#ifdef RT_USING_PIN
-
#define __STM32_PIN(index, gpio, gpio_index) {index, GPIO##gpio##_CLK_ENABLE, GPIO##gpio, GPIO_PIN_##gpio_index}
#define __STM32_PIN_DEFAULT {-1, 0, 0, 0}
@@ -35,49 +34,49 @@ static void GPIOB_CLK_ENABLE(void)
#endif
}
#if (STM32F10X_PIN_NUMBERS >36)
- static void GPIOC_CLK_ENABLE(void)
- {
- #ifdef __HAL_RCC_GPIOC_CLK_ENABLE
- __HAL_RCC_GPIOC_CLK_ENABLE();
- #endif
- }
- #if (STM32F10X_PIN_NUMBERS >48)
+static void GPIOC_CLK_ENABLE(void)
+{
+#ifdef __HAL_RCC_GPIOC_CLK_ENABLE
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+#endif
+}
+#if (STM32F10X_PIN_NUMBERS >48)
- static void GPIOD_CLK_ENABLE(void)
- {
- #ifdef __HAL_RCC_GPIOD_CLK_ENABLE
- __HAL_RCC_GPIOD_CLK_ENABLE();
- #endif
- }
- #if (STM32F10X_PIN_NUMBERS >64)
- static void GPIOE_CLK_ENABLE(void)
- {
- #ifdef __HAL_RCC_GPIOE_CLK_ENABLE
- __HAL_RCC_GPIOE_CLK_ENABLE();
- #endif
- }
- #if (STM32F10X_PIN_NUMBERS >100)
- static void GPIOF_CLK_ENABLE(void)
- {
- #ifdef __HAL_RCC_GPIOF_CLK_ENABLE
- __HAL_RCC_GPIOF_CLK_ENABLE();
- #endif
- }
- static void GPIOG_CLK_ENABLE(void)
- {
- #ifdef __HAL_RCC_GPIOG_CLK_ENABLE
- __HAL_RCC_GPIOG_CLK_ENABLE();
- #endif
- }
- static void GPIOH_CLK_ENABLE(void)
- {
- #ifdef __HAL_RCC_GPIOH_CLK_ENABLE
- __HAL_RCC_GPIOH_CLK_ENABLE();
- #endif
- }
- #endif
- #endif
- #endif
+static void GPIOD_CLK_ENABLE(void)
+{
+#ifdef __HAL_RCC_GPIOD_CLK_ENABLE
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+#endif
+}
+#if (STM32F10X_PIN_NUMBERS >64)
+static void GPIOE_CLK_ENABLE(void)
+{
+#ifdef __HAL_RCC_GPIOE_CLK_ENABLE
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+#endif
+}
+#if (STM32F10X_PIN_NUMBERS >100)
+static void GPIOF_CLK_ENABLE(void)
+{
+#ifdef __HAL_RCC_GPIOF_CLK_ENABLE
+ __HAL_RCC_GPIOF_CLK_ENABLE();
+#endif
+}
+static void GPIOG_CLK_ENABLE(void)
+{
+#ifdef __HAL_RCC_GPIOG_CLK_ENABLE
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+#endif
+}
+static void GPIOH_CLK_ENABLE(void)
+{
+#ifdef __HAL_RCC_GPIOH_CLK_ENABLE
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+#endif
+}
+#endif
+#endif
+#endif
#endif
/* STM32 GPIO driver */
struct pin_index
@@ -549,7 +548,6 @@ struct rt_pin_irq_hdr pin_irq_hdr_tab[] =
const struct pin_index *get_pin(uint8_t pin)
{
const struct pin_index *index;
-
if (pin < ITEM_NUM(pins))
{
index = &pins[pin];
@@ -560,20 +558,17 @@ const struct pin_index *get_pin(uint8_t pin)
{
index = RT_NULL;
}
-
return index;
};
void stm32_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
{
const struct pin_index *index;
-
index = get_pin(pin);
if (index == RT_NULL)
{
return;
}
-
HAL_GPIO_WritePin(index->gpio, index->pin, (GPIO_PinState)value);
}
@@ -581,17 +576,13 @@ int stm32_pin_read(rt_device_t dev, rt_base_t pin)
{
int value;
const struct pin_index *index;
-
value = PIN_LOW;
-
index = get_pin(pin);
if (index == RT_NULL)
{
return value;
}
-
value = HAL_GPIO_ReadPin(index->gpio, index->pin);
-
return value;
}
@@ -599,22 +590,18 @@ void stm32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
{
const struct pin_index *index;
GPIO_InitTypeDef GPIO_InitStruct;
-
index = get_pin(pin);
if (index == RT_NULL)
{
return;
}
-
/* GPIO Periph clock enable */
index->rcc();
-
/* Configure GPIO_InitStructure */
GPIO_InitStruct.Pin = index->pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-
if (mode == PIN_MODE_OUTPUT)
{
/* output setting */
@@ -645,9 +632,9 @@ void stm32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
}
-
HAL_GPIO_Init(index->gpio, &GPIO_InitStruct);
}
+
rt_inline rt_int32_t bit2bitno(rt_uint32_t bit)
{
int i;
@@ -660,6 +647,7 @@ rt_inline rt_int32_t bit2bitno(rt_uint32_t bit)
}
return -1;
}
+
rt_inline const struct pin_irq_map *get_pin_irq_map(uint32_t pinbit)
{
rt_int32_t mapindex = bit2bitno(pinbit);
@@ -675,7 +663,6 @@ rt_err_t stm32_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
const struct pin_index *index;
rt_base_t level;
rt_int32_t irqindex = -1;
-
index = get_pin(pin);
if (index == RT_NULL)
{
@@ -686,7 +673,6 @@ rt_err_t stm32_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
{
return RT_ENOSYS;
}
-
level = rt_hw_interrupt_disable();
if (pin_irq_hdr_tab[irqindex].pin == pin &&
pin_irq_hdr_tab[irqindex].hdr == hdr &&
@@ -706,15 +692,14 @@ rt_err_t stm32_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
pin_irq_hdr_tab[irqindex].mode = mode;
pin_irq_hdr_tab[irqindex].args = args;
rt_hw_interrupt_enable(level);
-
return RT_EOK;
}
+
rt_err_t stm32_pin_dettach_irq(struct rt_device *device, rt_int32_t pin)
{
const struct pin_index *index;
rt_base_t level;
rt_int32_t irqindex = -1;
-
index = get_pin(pin);
if (index == RT_NULL)
{
@@ -725,7 +710,6 @@ rt_err_t stm32_pin_dettach_irq(struct rt_device *device, rt_int32_t pin)
{
return RT_ENOSYS;
}
-
level = rt_hw_interrupt_disable();
if (pin_irq_hdr_tab[irqindex].pin == -1)
{
@@ -737,9 +721,9 @@ rt_err_t stm32_pin_dettach_irq(struct rt_device *device, rt_int32_t pin)
pin_irq_hdr_tab[irqindex].mode = 0;
pin_irq_hdr_tab[irqindex].args = RT_NULL;
rt_hw_interrupt_enable(level);
-
return RT_EOK;
}
+
rt_err_t stm32_pin_irq_enable(struct rt_device *device, rt_base_t pin,
rt_uint32_t enabled)
{
@@ -748,7 +732,6 @@ rt_err_t stm32_pin_irq_enable(struct rt_device *device, rt_base_t pin,
rt_base_t level;
rt_int32_t irqindex = -1;
GPIO_InitTypeDef GPIO_InitStruct;
-
index = get_pin(pin);
if (index == RT_NULL)
{
@@ -806,9 +789,9 @@ rt_err_t stm32_pin_irq_enable(struct rt_device *device, rt_base_t pin,
{
return RT_ENOSYS;
}
-
return RT_EOK;
}
+
const static struct rt_pin_ops _stm32_pin_ops =
{
stm32_pin_mode,
@@ -822,7 +805,6 @@ const static struct rt_pin_ops _stm32_pin_ops =
int rt_hw_pin_init(void)
{
int result;
-
result = rt_device_pin_register("pin", &_stm32_pin_ops, RT_NULL);
return result;
}
@@ -840,36 +822,42 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
pin_irq_hdr(bit2bitno(GPIO_Pin));
}
+
void EXTI0_IRQHandler(void)
{
rt_interrupt_enter();
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0);
rt_interrupt_leave();
}
+
void EXTI1_IRQHandler(void)
{
rt_interrupt_enter();
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_1);
rt_interrupt_leave();
}
+
void EXTI2_IRQHandler(void)
{
rt_interrupt_enter();
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2);
rt_interrupt_leave();
}
+
void EXTI3_IRQHandler(void)
{
rt_interrupt_enter();
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_3);
rt_interrupt_leave();
}
+
void EXTI4_IRQHandler(void)
{
rt_interrupt_enter();
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_4);
rt_interrupt_leave();
}
+
void EXTI9_5_IRQHandler(void)
{
rt_interrupt_enter();
@@ -880,6 +868,7 @@ void EXTI9_5_IRQHandler(void)
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_9);
rt_interrupt_leave();
}
+
void EXTI15_10_IRQHandler(void)
{
rt_interrupt_enter();
@@ -891,5 +880,4 @@ void EXTI15_10_IRQHandler(void)
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_15);
rt_interrupt_leave();
}
-
#endif
diff --git a/bsp/stm32f10x-HAL/drivers/drv_gpio.h b/bsp/stm32f10x-HAL/drivers/drv_gpio.h
index 7b4b38f2b..06d5bbc5e 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_gpio.h
+++ b/bsp/stm32f10x-HAL/drivers/drv_gpio.h
@@ -14,18 +14,12 @@
*/
#ifndef GPIO_H__
#define GPIO_H__
-
-
struct stm32_hw_pin_userdata
{
int pin;
uint32_t mode;
};
-
#define PIN_USERDATA_END {-1,0}
-
extern struct stm32_hw_pin_userdata stm32_pins[];
-
int rt_hw_pin_init(void);
-
#endif
diff --git a/bsp/stm32f10x-HAL/drivers/drv_sdcard.c b/bsp/stm32f10x-HAL/drivers/drv_sdcard.c
index df833b106..e3486d195 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_sdcard.c
+++ b/bsp/stm32f10x-HAL/drivers/drv_sdcard.c
@@ -21,18 +21,15 @@
* Date Author Notes
* 2018-01-13 Liu2guang the first version.
*/
-#include
-#include
+#include
+#include
#include "board.h"
#include "drv_sdcard.h"
-
#ifndef SDIO_CLK_DIV
-#define SDIO_CLK_DIV 2
+ #define SDIO_CLK_DIV 2
#endif
-
#define SDIO_TIMEOUT ((uint32_t)0x100000)
-
-static SD_HandleTypeDef hsdcard;
+static SD_HandleTypeDef hsdcard;
static DMA_HandleTypeDef hdma;
static struct rt_semaphore sd_lock;
@@ -43,11 +40,11 @@ void SDIO_IRQHandler(void)
rt_interrupt_leave();
}
-#if defined(USING_SD_RX_DMA) || defined(USING_SD_TX_DMA)
+#if defined(USING_SD_RX_DMA) || defined(USING_SD_TX_DMA)
void DMA2_Channel4_5_IRQHandler(void)
{
rt_interrupt_enter();
- HAL_DMA_IRQHandler(&hdma);
+ HAL_DMA_IRQHandler(&hdma);
rt_interrupt_leave();
}
#endif
@@ -57,47 +54,42 @@ rt_err_t stm32_read_blocks(uint32_t *data, uint32_t addr, uint32_t num)
uint32_t timeout = 0;
HAL_SD_StateTypeDef state_return;
HAL_SD_CardStateTypeDef sd_card_state_return;
-
-#if defined(USING_SD_RX_DMA) && defined(USING_SD_TX_DMA)
+#if defined(USING_SD_RX_DMA) && defined(USING_SD_TX_DMA)
hdma.Init.Direction = DMA_PERIPH_TO_MEMORY;
- hdma.Init.PeriphInc = DMA_PINC_DISABLE;
- hdma.Init.MemInc = DMA_MINC_ENABLE;
+ hdma.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma.Init.MemInc = DMA_MINC_ENABLE;
HAL_DMA_DeInit(&hdma);
- HAL_DMA_Init(&hdma);
+ HAL_DMA_Init(&hdma);
#endif
-
#if defined(USING_SD_RX_DMA)
- if(HAL_SD_ReadBlocks_DMA(&hsdcard, (uint8_t *)data, addr, num) != HAL_OK)
+ if (HAL_SD_ReadBlocks_DMA(&hsdcard, (uint8_t *)data, addr, num) != HAL_OK)
#else
- if(HAL_SD_ReadBlocks(&hsdcard, (uint8_t *)data, addr, num, SDIO_TIMEOUT) != HAL_OK)
+ if (HAL_SD_ReadBlocks(&hsdcard, (uint8_t *)data, addr, num, SDIO_TIMEOUT) != HAL_OK)
#endif
{
return RT_EIO;
}
-
do
{
state_return = HAL_SD_GetState(&hsdcard);
timeout++;
- }while((HAL_SD_STATE_BUSY == state_return) && (SDIO_TIMEOUT > timeout));
-
- if(HAL_SD_STATE_READY != state_return)
- {
- return RT_ERROR;
}
-
+ while ((HAL_SD_STATE_BUSY == state_return) && (SDIO_TIMEOUT > timeout));
+ if (HAL_SD_STATE_READY != state_return)
+ {
+ return RT_ERROR;
+ }
do
{
sd_card_state_return = HAL_SD_GetCardState(&hsdcard);
timeout++;
- }while((HAL_SD_CARD_TRANSFER != sd_card_state_return) && (SDIO_TIMEOUT > timeout));
-
- if(SDIO_TIMEOUT <= timeout)
- {
- return RT_ETIMEOUT;
}
-
- return RT_EOK;
+ while ((HAL_SD_CARD_TRANSFER != sd_card_state_return) && (SDIO_TIMEOUT > timeout));
+ if (SDIO_TIMEOUT <= timeout)
+ {
+ return RT_ETIMEOUT;
+ }
+ return RT_EOK;
}
rt_err_t stm32_write_blocks(uint32_t *data, uint32_t addr, uint32_t num)
@@ -105,220 +97,185 @@ rt_err_t stm32_write_blocks(uint32_t *data, uint32_t addr, uint32_t num)
uint32_t timeout = 0;
HAL_SD_StateTypeDef state_return;
HAL_SD_CardStateTypeDef sd_card_state_return;
-
-#if defined(USING_SD_RX_DMA) && defined(USING_SD_TX_DMA)
+#if defined(USING_SD_RX_DMA) && defined(USING_SD_TX_DMA)
hdma.Init.Direction = DMA_MEMORY_TO_PERIPH;
- hdma.Init.PeriphInc = DMA_MINC_ENABLE;
- hdma.Init.MemInc = DMA_PINC_DISABLE;
+ hdma.Init.PeriphInc = DMA_MINC_ENABLE;
+ hdma.Init.MemInc = DMA_PINC_DISABLE;
HAL_DMA_DeInit(&hdma);
- HAL_DMA_Init(&hdma);
+ HAL_DMA_Init(&hdma);
#endif
-
#if defined(USING_SD_TX_DMA)
- if(HAL_SD_WriteBlocks_DMA(&hsdcard, (uint8_t *)data, addr, num) != HAL_OK)
+ if (HAL_SD_WriteBlocks_DMA(&hsdcard, (uint8_t *)data, addr, num) != HAL_OK)
#else
- if(HAL_SD_WriteBlocks(&hsdcard, (uint8_t *)data, addr, num, SDIO_TIMEOUT) != HAL_OK)
+ if (HAL_SD_WriteBlocks(&hsdcard, (uint8_t *)data, addr, num, SDIO_TIMEOUT) != HAL_OK)
#endif
{
return RT_ERROR;
}
-
do
{
state_return = HAL_SD_GetState(&hsdcard);
timeout++;
- }while((HAL_SD_STATE_BUSY == state_return) && (SDIO_TIMEOUT > timeout));
-
- if(HAL_SD_STATE_READY != state_return)
- {
- return RT_ERROR;
}
-
+ while ((HAL_SD_STATE_BUSY == state_return) && (SDIO_TIMEOUT > timeout));
+ if (HAL_SD_STATE_READY != state_return)
+ {
+ return RT_ERROR;
+ }
do
{
sd_card_state_return = HAL_SD_GetCardState(&hsdcard);
timeout++;
- }while((HAL_SD_CARD_TRANSFER != sd_card_state_return) && (SDIO_TIMEOUT > timeout));
-
- if(SDIO_TIMEOUT <= timeout)
- {
- return RT_ETIMEOUT;
}
-
- return RT_EOK;
+ while ((HAL_SD_CARD_TRANSFER != sd_card_state_return) && (SDIO_TIMEOUT > timeout));
+ if (SDIO_TIMEOUT <= timeout)
+ {
+ return RT_ETIMEOUT;
+ }
+ return RT_EOK;
}
static rt_err_t stm32_sdcard_init(rt_device_t dev)
{
GPIO_InitTypeDef GPIO_InitStruct;
-
- if(rt_sem_init(&sd_lock, "sdlock", 1, RT_IPC_FLAG_FIFO) != RT_EOK)
+ if (rt_sem_init(&sd_lock, "sdlock", 1, RT_IPC_FLAG_FIFO) != RT_EOK)
{
return RT_ERROR;
}
-
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
-
- GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 |
+ GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 |
GPIO_PIN_12;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
- HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
-#if defined(USING_SD_RX_DMA) || defined(USING_SD_TX_DMA)
+#if defined(USING_SD_RX_DMA) || defined(USING_SD_TX_DMA)
__HAL_RCC_DMA2_CLK_ENABLE();
-
- hdma.Instance = DMA2_Channel4;
- hdma.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
- hdma.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
- hdma.Init.Mode = DMA_NORMAL;
- hdma.Init.Priority = DMA_PRIORITY_HIGH;
-
+ hdma.Instance = DMA2_Channel4;
+ hdma.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ hdma.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ hdma.Init.Mode = DMA_NORMAL;
+ hdma.Init.Priority = DMA_PRIORITY_HIGH;
#if defined(USING_SD_RX_DMA)
- hdma.Init.Direction = DMA_PERIPH_TO_MEMORY;
- hdma.Init.PeriphInc = DMA_PINC_DISABLE;
- hdma.Init.MemInc = DMA_MINC_ENABLE;
- __HAL_LINKDMA(&hsdcard, hdmarx, hdma);
+ hdma.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma.Init.MemInc = DMA_MINC_ENABLE;
+ __HAL_LINKDMA(&hsdcard, hdmarx, hdma);
#endif
-
#if defined(USING_SD_TX_DMA)
hdma.Init.Direction = DMA_MEMORY_TO_PERIPH;
hdma.Init.PeriphInc = DMA_MINC_ENABLE;
- hdma.Init.MemInc = DMA_PINC_DISABLE;
- __HAL_LINKDMA(&hsdcard, hdmatx, hdma);
+ hdma.Init.MemInc = DMA_PINC_DISABLE;
+ __HAL_LINKDMA(&hsdcard, hdmatx, hdma);
#endif
-
HAL_DMA_DeInit(&hdma);
- if(HAL_DMA_Init(&hdma) != HAL_OK)
+ if (HAL_DMA_Init(&hdma) != HAL_OK)
{
rt_kprintf("HAL_DMA_Init error\n");
return RT_EIO;
}
#endif
-
HAL_NVIC_SetPriority(DMA2_Channel4_5_IRQn, 3, 0);
- HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
-
- __HAL_RCC_SDIO_CLK_ENABLE();
-
- hsdcard.Instance = SDIO;
- hsdcard.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
+ __HAL_RCC_SDIO_CLK_ENABLE();
+ hsdcard.Instance = SDIO;
+ hsdcard.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
hsdcard.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
hsdcard.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
hsdcard.Init.BusWide = SDIO_BUS_WIDE_1B;
hsdcard.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_ENABLE;
- hsdcard.Init.ClockDiv = SDIO_CLK_DIV;
-
+ hsdcard.Init.ClockDiv = SDIO_CLK_DIV;
HAL_SD_DeInit(&hsdcard);
- if(HAL_SD_Init(&hsdcard) != HAL_OK)
+ if (HAL_SD_Init(&hsdcard) != HAL_OK)
{
rt_kprintf("HAL_SD_Init error\n");
- return RT_EIO;
+ return RT_EIO;
}
-
HAL_NVIC_SetPriority(SDIO_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(SDIO_IRQn);
-
- if(HAL_SD_ConfigWideBusOperation(&hsdcard, SDIO_BUS_WIDE_4B) != HAL_OK)
+ if (HAL_SD_ConfigWideBusOperation(&hsdcard, SDIO_BUS_WIDE_4B) != HAL_OK)
{
rt_kprintf("HAL_SD_ConfigWideBusOperation error\n");
return RT_EIO;
}
-
- return RT_EOK;
+ return RT_EOK;
}
static rt_err_t stm32_sdcard_open(rt_device_t dev, rt_uint16_t oflag)
{
- return RT_EOK;
+ return RT_EOK;
}
-static rt_err_t stm32_sdcard_close(rt_device_t dev)
+static rt_err_t stm32_sdcard_close(rt_device_t dev)
{
- return RT_EOK;
-}
+ return RT_EOK;
+}
-static rt_size_t stm32_sdcard_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
-{
- int ret = RT_EOK;
-
- rt_sem_take(&sd_lock, RT_WAITING_FOREVER);
- ret = stm32_read_blocks((uint32_t *)buffer, pos, size);
- rt_sem_release(&sd_lock);
-
- if(ret != RT_EOK)
- {
- return 0;
- }
-
- return size;
-}
-
-static rt_size_t stm32_sdcard_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
+static rt_size_t stm32_sdcard_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
int ret = RT_EOK;
-
rt_sem_take(&sd_lock, RT_WAITING_FOREVER);
- ret = stm32_write_blocks((uint32_t *)buffer, pos, size);
+ ret = stm32_read_blocks((uint32_t *)buffer, pos, size);
rt_sem_release(&sd_lock);
-
- if(ret != RT_EOK)
+ if (ret != RT_EOK)
{
- return 0;
+ return 0;
}
-
- return size;
-}
+ return size;
+}
+
+static rt_size_t stm32_sdcard_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
+{
+ int ret = RT_EOK;
+ rt_sem_take(&sd_lock, RT_WAITING_FOREVER);
+ ret = stm32_write_blocks((uint32_t *)buffer, pos, size);
+ rt_sem_release(&sd_lock);
+ if (ret != RT_EOK)
+ {
+ return 0;
+ }
+ return size;
+}
static rt_err_t stm32_sdcard_control(rt_device_t dev, int cmd, void *args)
{
RT_ASSERT(dev != RT_NULL);
-
- // RT_DEVICE_CTRL_BLK_GETGEOME
- if(cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
+ // RT_DEVICE_CTRL_BLK_GETGEOME
+ if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
{
HAL_SD_CardInfoTypeDef sdcard_info;
struct rt_device_blk_geometry *geometry;
-
HAL_SD_GetCardInfo(&hsdcard, &sdcard_info);
-
geometry = (struct rt_device_blk_geometry *)args;
-
geometry->bytes_per_sector = sdcard_info.BlockSize;
geometry->block_size = sdcard_info.BlockSize;
geometry->sector_count = sdcard_info.BlockNbr;
}
-
return RT_EOK;
-}
+}
-static struct rt_device device;
+static struct rt_device device;
int rt_hw_sdcard_init(void)
{
- rt_err_t ret = RT_EOK;
-
+ rt_err_t ret = RT_EOK;
device.type = RT_Device_Class_Block;
device.init = stm32_sdcard_init;
- device.open = stm32_sdcard_open;
+ device.open = stm32_sdcard_open;
device.read = stm32_sdcard_read;
device.write = stm32_sdcard_write;
device.control = stm32_sdcard_control;
device.close = stm32_sdcard_close;
-
- ret = rt_device_register(&device, "sd0",
- RT_DEVICE_FLAG_REMOVABLE |
- RT_DEVICE_FLAG_RDWR |
- RT_DEVICE_FLAG_STANDALONE);
- if(ret != RT_EOK)
+ ret = rt_device_register(&device, "sd0",
+ RT_DEVICE_FLAG_REMOVABLE |
+ RT_DEVICE_FLAG_RDWR |
+ RT_DEVICE_FLAG_STANDALONE);
+ if (ret != RT_EOK)
{
- return ret;
+ return ret;
}
-
- return RT_EOK;
+ return RT_EOK;
}
-INIT_DEVICE_EXPORT(rt_hw_sdcard_init);
+INIT_DEVICE_EXPORT(rt_hw_sdcard_init);
diff --git a/bsp/stm32f10x-HAL/drivers/drv_sdcard.h b/bsp/stm32f10x-HAL/drivers/drv_sdcard.h
index d483020b6..beaf1faf2 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_sdcard.h
+++ b/bsp/stm32f10x-HAL/drivers/drv_sdcard.h
@@ -22,9 +22,9 @@
* 2018-01-13 Liu2guang the first version.
*/
-#ifndef __DRV_SDCARD_H_
-#define __DRV_SDCARD_H_
+#ifndef __DRV_SDCARD_H_
+#define __DRV_SDCARD_H_
-int rt_hw_sdcard_init(void);
+int rt_hw_sdcard_init(void);
#endif
diff --git a/bsp/stm32f10x-HAL/drivers/drv_spi.c b/bsp/stm32f10x-HAL/drivers/drv_spi.c
index 15fe2ff25..14b24365f 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_spi.c
+++ b/bsp/stm32f10x-HAL/drivers/drv_spi.c
@@ -16,30 +16,25 @@
#include
#include
#ifdef RT_USING_SPI
-
#define SPIRXEVENT 0x01
#define SPITXEVENT 0x02
#define SPITIMEOUT 2
#define SPICRCEN 0
-
struct stm32_hw_spi_cs
{
rt_uint32_t pin;
};
-
struct stm32_spi
{
SPI_TypeDef *Instance;
struct rt_spi_configuration *cfg;
};
-
static rt_err_t stm32_spi_init(SPI_TypeDef *spix, struct rt_spi_configuration *cfg)
{
SPI_HandleTypeDef hspi;
hspi.Instance = spix;
-
if (cfg->mode & RT_SPI_SLAVE)
{
hspi.Init.Mode = SPI_MODE_SLAVE;
@@ -145,6 +140,7 @@ static rt_err_t stm32_spi_init(SPI_TypeDef *spix, struct rt_spi_configuration *c
__HAL_SPI_ENABLE(&hspi);
return RT_EOK;
}
+
#define SPISTEP(datalen) (((datalen) == 8) ? 1 : 2)
#define SPISEND_1(reg, ptr, datalen) \
do \
@@ -195,6 +191,7 @@ static rt_err_t spitxrx1b(struct stm32_spi *hspi, void *rcvb, const void *sndb)
SPIRECV_1(hspi->Instance->DR, rcvb, hspi->cfg->data_width);
return RT_EOK;
}
+
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
rt_err_t res;
@@ -203,7 +200,6 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
RT_ASSERT(device->bus->parent.user_data != RT_NULL);
struct stm32_spi *hspi = (struct stm32_spi *)device->bus->parent.user_data;
struct stm32_hw_spi_cs *cs = device->parent.user_data;
-
if (message->cs_take)
{
rt_pin_write(cs->pin, 0);
@@ -238,7 +234,6 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
return message->length - length;
}
-
rt_err_t spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
{
@@ -378,34 +373,3 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef *spiHandle)
}
}
#endif /*RT_USING_SPI*/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/bsp/stm32f10x-HAL/drivers/drv_spi.h b/bsp/stm32f10x-HAL/drivers/drv_spi.h
index 0775522e2..ce88c2be3 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_spi.h
+++ b/bsp/stm32f10x-HAL/drivers/drv_spi.h
@@ -18,21 +18,7 @@
#include
#include
#include
-
-
-
-extern int stm32_spi_register_bus(SPI_TypeDef * SPIx,const char * name);
-extern rt_err_t stm32_spi_bus_attach_device(rt_uint32_t pin,const char * bus_name,const char * device_name);
+extern int stm32_spi_register_bus(SPI_TypeDef *SPIx, const char *name);
+extern rt_err_t stm32_spi_bus_attach_device(rt_uint32_t pin, const char *bus_name, const char *device_name);
extern int stm32_hw_spi_init(void);
-
-
-
#endif
-
-
-
-
-
-
-
-
diff --git a/bsp/stm32f10x-HAL/drivers/drv_usart.c b/bsp/stm32f10x-HAL/drivers/drv_usart.c
index 53603edcb..80bf5578d 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_usart.c
+++ b/bsp/stm32f10x-HAL/drivers/drv_usart.c
@@ -23,7 +23,6 @@
#include
#include
-
/* STM32 uart driver */
struct stm32_uart
{
@@ -34,17 +33,13 @@ struct stm32_uart
static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct stm32_uart *uart;
-
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
-
uart = (struct stm32_uart *)serial->parent.user_data;
-
uart->huart.Init.BaudRate = cfg->baud_rate;
uart->huart.Init.HwFlowCtl = UART_HWCONTROL_NONE;
uart->huart.Init.Mode = UART_MODE_TX_RX;
uart->huart.Init.OverSampling = UART_OVERSAMPLING_16;
-
switch (cfg->data_bits)
{
case DATA_BITS_8:
@@ -84,23 +79,18 @@ static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_c
uart->huart.Init.Parity = UART_PARITY_NONE;
break;
}
-
if (HAL_UART_Init(&uart->huart) != HAL_OK)
{
return RT_ERROR;
}
-
return RT_EOK;
}
static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct stm32_uart *uart;
-// rt_uint32_t ctrl_arg = (rt_uint32_t)(arg);
-
RT_ASSERT(serial != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
-
switch (cmd)
{
/* disable interrupt */
@@ -124,7 +114,6 @@ static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *ar
static int stm32_putc(struct rt_serial_device *serial, char c)
{
struct stm32_uart *uart;
-
RT_ASSERT(serial != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
while (__HAL_UART_GET_FLAG(&uart->huart, UART_FLAG_TXE) == RESET);
@@ -146,7 +135,6 @@ static int stm32_getc(struct rt_serial_device *serial)
return ch;
}
-
/**
* Uart common interrupt process. This need add to uart ISR.
*
@@ -155,9 +143,7 @@ static int stm32_getc(struct rt_serial_device *serial)
static void uart_isr(struct rt_serial_device *serial)
{
struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;
-
RT_ASSERT(uart != RT_NULL);
-
if ((__HAL_UART_GET_FLAG(&uart->huart, UART_FLAG_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&uart->huart, UART_IT_RXNE) != RESET))
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
@@ -186,9 +172,7 @@ void USART1_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
-
uart_isr(&serial1);
-
/* leave interrupt */
rt_interrupt_leave();
}
@@ -250,7 +234,7 @@ int rt_hw_usart_init(void)
MX_USART_UART_Init(&uart->huart);
/* register UART1 device */
rt_hw_serial_register(&serial1, "uart1",
- RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX ,
+ RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
@@ -262,7 +246,7 @@ int rt_hw_usart_init(void)
MX_USART_UART_Init(&uart->huart);
/* register UART1 device */
rt_hw_serial_register(&serial2, "uart2",
- RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX ,
+ RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
@@ -274,14 +258,13 @@ int rt_hw_usart_init(void)
MX_USART_UART_Init(&uart->huart);
/* register UART1 device */
rt_hw_serial_register(&serial3, "uart3",
- RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX ,
+ RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
return 0;
}
INIT_BOARD_EXPORT(rt_hw_usart_init);
-
static void MX_USART_UART_Init(UART_HandleTypeDef *uartHandle)
{
uartHandle->Init.BaudRate = 115200;
@@ -296,15 +279,12 @@ static void MX_USART_UART_Init(UART_HandleTypeDef *uartHandle)
}
/* USART2 init function */
-
void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
{
-
GPIO_InitTypeDef GPIO_InitStruct;
if (uartHandle->Instance == USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
-
/* USER CODE END USART1_MspInit 0 */
/* USART1 clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
@@ -317,23 +297,19 @@ void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
GPIO_InitStruct.Pin = GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
/* USART1 interrupt Init */
HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspInit 1 */
-
/* USER CODE END USART1_MspInit 1 */
}
else if (uartHandle->Instance == USART2)
{
/* USER CODE BEGIN USART2_MspInit 0 */
-
/* USER CODE END USART2_MspInit 0 */
/* USART2 clock enable */
__HAL_RCC_USART2_CLK_ENABLE();
@@ -346,12 +322,10 @@ void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
/* USART2 interrupt Init */
HAL_NVIC_SetPriority(USART2_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(USART2_IRQn);
@@ -362,7 +336,6 @@ void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
else if (uartHandle->Instance == USART3)
{
/* USER CODE BEGIN USART3_MspInit 0 */
-
/* USER CODE END USART3_MspInit 0 */
/* USART3 clock enable */
__HAL_RCC_USART3_CLK_ENABLE();
@@ -375,86 +348,66 @@ void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
GPIO_InitStruct.Pin = GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
/* USART3 interrupt Init */
HAL_NVIC_SetPriority(USART3_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(USART3_IRQn);
/* USER CODE BEGIN USART3_MspInit 1 */
-
/* USER CODE END USART3_MspInit 1 */
}
}
void HAL_UART_MspDeInit(UART_HandleTypeDef *uartHandle)
{
-
if (uartHandle->Instance == USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
-
/* USER CODE END USART1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART1_CLK_DISABLE();
-
/**USART1 GPIO Configuration
PA9 ------> USART1_TX
PA10 ------> USART1_RX
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
-
/* USART1 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspDeInit 1 */
-
/* USER CODE END USART1_MspDeInit 1 */
}
else if (uartHandle->Instance == USART2)
{
/* USER CODE BEGIN USART2_MspDeInit 0 */
-
/* USER CODE END USART2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART2_CLK_DISABLE();
-
/**USART2 GPIO Configuration
PA2 ------> USART2_TX
PA3 ------> USART2_RX
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3);
-
/* USART2 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART2_IRQn);
/* USER CODE BEGIN USART2_MspDeInit 1 */
-
/* USER CODE END USART2_MspDeInit 1 */
}
else if (uartHandle->Instance == USART3)
{
/* USER CODE BEGIN USART3_MspDeInit 0 */
-
/* USER CODE END USART3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART3_CLK_DISABLE();
-
/**USART3 GPIO Configuration
PB10 ------> USART3_TX
PB11 ------> USART3_RX
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10 | GPIO_PIN_11);
-
/* USART3 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART3_IRQn);
/* USER CODE BEGIN USART3_MspDeInit 1 */
-
/* USER CODE END USART3_MspDeInit 1 */
}
}
-
-
-
-
diff --git a/bsp/stm32f10x-HAL/drivers/drv_usart.h b/bsp/stm32f10x-HAL/drivers/drv_usart.h
index af7109003..78b46739e 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_usart.h
+++ b/bsp/stm32f10x-HAL/drivers/drv_usart.h
@@ -11,12 +11,9 @@
* Date Author Notes
* 2009-01-05 Bernard the first version
*/
-
#ifndef __USART_H__
#define __USART_H__
-
#include
#include
int rt_hw_usart_init(void);
-
#endif
diff --git a/bsp/stm32f10x-HAL/drivers/drv_usb.c b/bsp/stm32f10x-HAL/drivers/drv_usb.c
index bade24f08..111fc1b30 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_usb.c
+++ b/bsp/stm32f10x-HAL/drivers/drv_usb.c
@@ -16,9 +16,7 @@
#include
#include
#include "board.h"
-
-#define USB_DISCONNECT_PIN 30 //PA9
-
+#define USB_DISCONNECT_PIN 30 //PA9
static PCD_HandleTypeDef _stm_pcd;
static struct udcd _stm_udc;
static struct ep_id _ep_pool[] =
@@ -35,9 +33,7 @@ static struct ep_id _ep_pool[] =
void USB_LP_CAN1_RX0_IRQHandler(void)
{
rt_interrupt_enter();
-
HAL_PCD_IRQHandler(&_stm_pcd);
-
rt_interrupt_leave();
}
@@ -51,10 +47,9 @@ void HAL_PCD_ResetCallback(PCD_HandleTypeDef *pcd)
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
{
- rt_usbd_ep0_setup_handler(&_stm_udc, (struct urequest*)hpcd->Setup);
+ rt_usbd_ep0_setup_handler(&_stm_udc, (struct urequest *)hpcd->Setup);
}
-
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
{
if (epnum == 0)
@@ -63,7 +58,7 @@ void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
}
else
{
- rt_usbd_ep_in_handler(&_stm_udc, 0x80|epnum,hpcd->IN_ep[epnum].xfer_count);
+ rt_usbd_ep_in_handler(&_stm_udc, 0x80 | epnum, hpcd->IN_ep[epnum].xfer_count);
}
}
@@ -90,46 +85,43 @@ void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
}
else
{
- rt_usbd_ep0_out_handler(&_stm_udc,hpcd->OUT_ep[0].xfer_count);
+ rt_usbd_ep0_out_handler(&_stm_udc, hpcd->OUT_ep[0].xfer_count);
}
}
-
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
{
- if(state == 1)
+ if (state == 1)
{
- rt_pin_write(USB_DISCONNECT_PIN,PIN_HIGH);
+ rt_pin_write(USB_DISCONNECT_PIN, PIN_HIGH);
}
else
{
- rt_pin_write(USB_DISCONNECT_PIN,PIN_LOW);
- }
+ rt_pin_write(USB_DISCONNECT_PIN, PIN_LOW);
+ }
}
-void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+void HAL_PCD_MspInit(PCD_HandleTypeDef *pcdHandle)
{
- if(pcdHandle->Instance==USB)
+ if (pcdHandle->Instance == USB)
{
__HAL_RCC_GPIOA_CLK_ENABLE();
- rt_pin_mode(USB_DISCONNECT_PIN,PIN_MODE_OUTPUT);
- rt_pin_write(USB_DISCONNECT_PIN,PIN_LOW);
+ rt_pin_mode(USB_DISCONNECT_PIN, PIN_MODE_OUTPUT);
+ rt_pin_write(USB_DISCONNECT_PIN, PIN_LOW);
/* Peripheral clock enable */
__HAL_RCC_USB_CLK_ENABLE();
-
/* Peripheral interrupt init */
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
}
}
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *pcdHandle)
{
- if(pcdHandle->Instance==USB)
+ if (pcdHandle->Instance == USB)
{
/* Peripheral clock disable */
__HAL_RCC_USB_CLK_DISABLE();
-
/* Peripheral interrupt Deinit*/
HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
}
@@ -143,7 +135,7 @@ static rt_err_t _ep_set_stall(rt_uint8_t address)
static rt_err_t _ep_clear_stall(rt_uint8_t address)
{
- HAL_PCD_EP_ClrStall(&_stm_pcd, address);
+ HAL_PCD_EP_ClrStall(&_stm_pcd, address);
return RT_EOK;
}
@@ -164,7 +156,6 @@ static rt_err_t _ep_enable(uep_t ep)
RT_ASSERT(ep->ep_desc != RT_NULL);
HAL_PCD_EP_Open(&_stm_pcd, ep->ep_desc->bEndpointAddress,
ep->ep_desc->wMaxPacketSize, ep->ep_desc->bmAttributes);
-
return RT_EOK;
}
@@ -196,7 +187,7 @@ static rt_size_t _ep_write(rt_uint8_t address, void *buffer, rt_size_t size)
}
static rt_err_t _ep0_send_status(void)
-{
+{
HAL_PCD_EP_Transmit(&_stm_pcd, 0x00, NULL, 0);
return RT_EOK;
}
@@ -214,10 +205,8 @@ static rt_err_t _wakeup(void)
static rt_err_t _init(rt_device_t device)
{
PCD_HandleTypeDef *pcd;
-
/* Set LL Driver parameters */
- pcd = (PCD_HandleTypeDef*)device->user_data;
-
+ pcd = (PCD_HandleTypeDef *)device->user_data;
pcd->Instance = USB;
pcd->Init.dev_endpoints = 8;
pcd->Init.speed = PCD_SPEED_FULL;
@@ -225,19 +214,16 @@ static rt_err_t _init(rt_device_t device)
pcd->Init.low_power_enable = DISABLE;
pcd->Init.lpm_enable = DISABLE;
pcd->Init.battery_charging_enable = DISABLE;
-
/* Initialize LL Driver */
HAL_PCD_Init(pcd);
-
- HAL_PCDEx_PMAConfig(pcd , 0x00 , PCD_SNG_BUF, 0x18);
- HAL_PCDEx_PMAConfig(pcd , 0x80 , PCD_SNG_BUF, 0x58);
- HAL_PCDEx_PMAConfig(pcd , 0x81 , PCD_SNG_BUF, 0x98);
- HAL_PCDEx_PMAConfig(pcd , 0x01 , PCD_SNG_BUF, 0x118);
- HAL_PCDEx_PMAConfig(pcd , 0x82 , PCD_SNG_BUF, 0xD8);
- HAL_PCDEx_PMAConfig(pcd , 0x02 , PCD_SNG_BUF, 0x158);
- HAL_PCDEx_PMAConfig(pcd , 0x83 , PCD_SNG_BUF, 0x198);
+ HAL_PCDEx_PMAConfig(pcd, 0x00, PCD_SNG_BUF, 0x18);
+ HAL_PCDEx_PMAConfig(pcd, 0x80, PCD_SNG_BUF, 0x58);
+ HAL_PCDEx_PMAConfig(pcd, 0x81, PCD_SNG_BUF, 0x98);
+ HAL_PCDEx_PMAConfig(pcd, 0x01, PCD_SNG_BUF, 0x118);
+ HAL_PCDEx_PMAConfig(pcd, 0x82, PCD_SNG_BUF, 0xD8);
+ HAL_PCDEx_PMAConfig(pcd, 0x02, PCD_SNG_BUF, 0x158);
+ HAL_PCDEx_PMAConfig(pcd, 0x83, PCD_SNG_BUF, 0x198);
HAL_PCD_Start(pcd);
-
return RT_EOK;
}
@@ -257,11 +243,9 @@ const static struct udcd_ops _udc_ops =
_wakeup,
};
-
int stm_usbd_register(void)
{
rt_memset((void *)&_stm_udc, 0, sizeof(struct udcd));
-
_stm_udc.parent.type = RT_Device_Class_USBDevice;
_stm_udc.parent.init = _init;
_stm_udc.parent.user_data = &_stm_pcd;
@@ -269,10 +253,9 @@ int stm_usbd_register(void)
/* Register endpoint infomation */
_stm_udc.ep_pool = _ep_pool;
_stm_udc.ep0.id = &_ep_pool[0];
-
rt_device_register((rt_device_t)&_stm_udc, "usbd", 0);
rt_usb_device_init();
return 0;
}
+
INIT_DEVICE_EXPORT(stm_usbd_register);
-
diff --git a/bsp/stm32f10x-HAL/drivers/drv_usb.h b/bsp/stm32f10x-HAL/drivers/drv_usb.h
index 040016e5a..37932fae2 100644
--- a/bsp/stm32f10x-HAL/drivers/drv_usb.h
+++ b/bsp/stm32f10x-HAL/drivers/drv_usb.h
@@ -14,7 +14,5 @@
#ifndef __STM32_USB_H__
#define __STM32_USB_H__
#include
-
int stm_usbd_register(void);
-
#endif
diff --git a/bsp/stm32f10x-HAL/drivers/stm32f1xx_hal_conf.h b/bsp/stm32f10x-HAL/drivers/stm32f1xx_hal_conf.h
index 4475e0904..e50abfd1f 100644
--- a/bsp/stm32f10x-HAL/drivers/stm32f1xx_hal_conf.h
+++ b/bsp/stm32f10x-HAL/drivers/stm32f1xx_hal_conf.h
@@ -35,17 +35,17 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
- */
+ */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_CONF_H
#define __STM32F1xx_HAL_CONF_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
#include "rtthread.h"
-#ifndef NULL
+#ifndef NULL
#define NULL RT_NULL
#endif
/* Exported types ------------------------------------------------------------*/
@@ -53,7 +53,7 @@
/* ########################## Module Selection ############################## */
/**
- * @brief This is the list of modules to be used in the HAL driver
+ * @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
// #define HAL_ADC_MODULE_ENABLED
@@ -75,23 +75,23 @@
// #define HAL_NOR_MODULE_ENABLED
// #define HAL_PCCARD_MODULE_ENABLED
#ifdef RT_USING_USB_DEVICE
- #define HAL_PCD_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
#endif
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
// #define HAL_RTC_MODULE_ENABLED
-#ifdef RT_USING_SDCARD
- #define HAL_SD_MODULE_ENABLED
+#ifdef RT_USING_SDCARD
+#define HAL_SD_MODULE_ENABLED
#endif
// #define HAL_SMARTCARD_MODULE_ENABLED
#ifdef RT_USING_SPI
- #define HAL_SPI_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
#endif
// #define HAL_SRAM_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#ifdef RT_USING_SERIAL
- #define HAL_UART_MODULE_ENABLED
- #define HAL_USART_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
#endif
// #define HAL_WWDG_MODULE_ENABLED
@@ -101,49 +101,49 @@
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
- * (when HSE is used as system clock source, directly or through the PLL).
+ * (when HSE is used as system clock source, directly or through the PLL).
*/
#define HSE_VALUE ((unsigned int)RT_HSE_VALUE)
-#if !defined (HSE_VALUE)
+#if !defined (HSE_VALUE)
#if defined(USE_STM3210C_EVAL)
- #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
+#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
#else
- #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
+#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
- #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
+#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
- * (when HSI is used as system clock source, directly or through the PLL).
+ * (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
- #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */
+#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
-#if !defined (LSI_VALUE)
- #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
+#if !defined (LSI_VALUE)
+#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
- The real value may vary depending on the variations
- in voltage and temperature. */
+The real value may vary depending on the variations
+in voltage and temperature. */
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
- #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
+#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
- #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
+#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/* Tip: To avoid modifying this file each time you need to use different HSE,
@@ -152,7 +152,7 @@
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
- */
+ */
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
#define USE_RTOS 0U
@@ -160,7 +160,7 @@
/* ########################## Assert Selection ############################## */
/**
- * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
@@ -177,7 +177,7 @@
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
-/* Definition of the Ethernet driver buffers size and count */
+/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */
@@ -185,9 +185,9 @@
/* Section 2: PHY configuration section */
-/* DP83848 PHY Address*/
+/* DP83848 PHY Address*/
#define DP83848_PHY_ADDRESS 0x01U
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY 0x000000FFU
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY 0x00000FFFU
@@ -199,7 +199,7 @@
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
-
+
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
@@ -214,13 +214,13 @@
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
-
+
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
-
+
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
@@ -242,131 +242,131 @@
/* Includes ------------------------------------------------------------------*/
/**
- * @brief Include module's header file
+ * @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
- #include "stm32f1xx_hal_rcc.h"
+#include "stm32f1xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
- #include "stm32f1xx_hal_gpio.h"
+#include "stm32f1xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
-
+
#ifdef HAL_DMA_MODULE_ENABLED
- #include "stm32f1xx_hal_dma.h"
+#include "stm32f1xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
-
+
#ifdef HAL_ETH_MODULE_ENABLED
- #include "stm32f1xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
+#include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
#ifdef HAL_CAN_MODULE_ENABLED
- #include "stm32f1xx_hal_can.h"
+#include "stm32f1xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f1xx_hal_cec.h"
+#include "stm32f1xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
- #include "stm32f1xx_hal_cortex.h"
+#include "stm32f1xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
- #include "stm32f1xx_hal_adc.h"
+#include "stm32f1xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
- #include "stm32f1xx_hal_crc.h"
+#include "stm32f1xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
- #include "stm32f1xx_hal_dac.h"
+#include "stm32f1xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
- #include "stm32f1xx_hal_flash.h"
+#include "stm32f1xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
- #include "stm32f1xx_hal_sram.h"
+#include "stm32f1xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
- #include "stm32f1xx_hal_nor.h"
+#include "stm32f1xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f1xx_hal_i2c.h"
+#include "stm32f1xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f1xx_hal_i2s.h"
+#include "stm32f1xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f1xx_hal_iwdg.h"
+#include "stm32f1xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f1xx_hal_pwr.h"
+#include "stm32f1xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f1xx_hal_rtc.h"
+#include "stm32f1xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
- #include "stm32f1xx_hal_pccard.h"
-#endif /* HAL_PCCARD_MODULE_ENABLED */
+#include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f1xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
+#include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
- #include "stm32f1xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
+#include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f1xx_hal_spi.h"
+#include "stm32f1xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f1xx_hal_tim.h"
+#include "stm32f1xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f1xx_hal_uart.h"
+#include "stm32f1xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f1xx_hal_usart.h"
+#include "stm32f1xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f1xx_hal_irda.h"
+#include "stm32f1xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f1xx_hal_smartcard.h"
+#include "stm32f1xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f1xx_hal_wwdg.h"
+#include "stm32f1xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f1xx_hal_pcd.h"
+#include "stm32f1xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f1xx_hal_hcd.h"
+#include "stm32f1xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
- #include "stm32f1xx_hal_mmc.h"
+#include "stm32f1xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
@@ -375,15 +375,15 @@
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
- * line number of the call that failed.
+ * line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
- #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
- void assert_failed(uint8_t* file, uint32_t line);
+void assert_failed(uint8_t *file, uint32_t line);
#else
- #define assert_param(expr) ((void)0U)
+#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
diff --git a/bsp/stm32f10x-HAL/drivers/stm32f1xx_it.h b/bsp/stm32f10x-HAL/drivers/stm32f1xx_it.h
index 24c3f7fe5..ac3168779 100644
--- a/bsp/stm32f10x-HAL/drivers/stm32f1xx_it.h
+++ b/bsp/stm32f10x-HAL/drivers/stm32f1xx_it.h
@@ -36,8 +36,8 @@
#define __STM32F1xx_IT_H
#ifdef __cplusplus
- extern "C" {
-#endif
+extern "C" {
+#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"